sr-users April 2006

sr-users@lists.kamailio.org

188 participants
431 discussions

[Users] using AVPs to write into database

by Jayesh Nambiar

Hi all, I am trying to implement the call forwarding feature in openser. The forwarding part is fine. But I have the follwing scenario: Whenever a user needs to change his forwarding number, he should be able to do so from his end device only. For eg: He first presses 86 and then the 10 digit number to be forwarded. Here the 86 has to be stripped and the 10 digit number should be inserted into the call forward value column of the preferences table. Also if he wants to remove the forwarded number, he can do so by pressing say for eg: 87. on receiving this number openser should delete that value from the table. Is this possible. I tried to do the following, but somehow it does not change the value. if(uri=~"^sip:86[0-9]*@") { if(avp_db_load("$from/username", "s:callfwd")) { #check if call-fwd feature is enabled for the user log(1,"AVP condition returned true"); strip(2); avp_write("$ruri", "s:callfwd"); avp_print(); log(1,"AVP written"); sl_send_reply("200", "OK"); exit; }; }; Is avp_write the proper method or I guess avp_db_store can also help me. The avp_print() function also does not show me anything in the log. Are there any logical mistakes or I have mis-interpreted the syntax of avpops functions. Please help me in thsi regard. Thanks a lot in advance. Jayesh. --------------------------------- Jiyo cricket on Yahoo! India cricket Yahoo! Messenger Mobile Stay in touch with your buddies all the time.

18 years

[Users] using AVPs to write into database

by Jayesh Nambiar

18 years

[Users] using AVPs to write into database

by Jayesh Nambiar

18 years

[Users] How to test for domain in sip request in openser.cfg.

by Bas Driessen

Hello, I would like to test for the domain name in a sip request to decide if an invite is accepted or not. I have the following lines in my openser.cfg file to cater for DNS SRV forwarding: # accept calls from foo.com if ( is_method("INVITE") ) { rewritehost ("sipproxy.foo2.com"); rewriteport (""); } This works well, but I would like to tighten security by only allowing invites forwarded by foo.com. When debugging using xlog calls, the pseudo-variable I am after is : $rd. However $rd can not be used in openser.cfg as follows: if ( is_method("INVITE") && $rd="foo.com" ) Documentation suggests to use core keywords like: if(is_method("INVITE") && from_uri=~".*(a)foo.com") This does not work for my situation and I don't know how I can see the value of 'from_uri', as it can't be expanded into xlog calls. So my kind of overlapping questions are: How can I use pseudo-variables in openser.cfg to test for a certain value? How can I see (debug) the contents of a core keyword? Which keyword should I be using to solve this issue? Has anyone solved a similar issue in the past and if so can you please give some details? Thanks, Bas.

18 years

Re: [Serusers] about the accounting and prepaid problem

by arr

Dear ALL: I still have this problem !! SIP UA can register in the SER after freeradius checking, but when call forwarded to the b2bua ( b2bua then auth by radius) , follow is the radius log modcall[authorize]: module "sql" returns notfound for request 4 <====but i use the same account and password to register to the SER modcall: leaving group authorize (returns ok) for request 4 auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user. Please help me follow is in my ser.cfg if (method=="INVITE") { record_route(); forward(b2bua.server,5065); sl_send_reply("181","Forwarding the call to B2BUA"); } ar. ----- Original Message ----- From: Chia-Hung Hsu To: serusers(a)lists.iptel.org Sent: Sunday, March 26, 2006 12:30 AM Subject: Fw: [Serusers] about the accounting and prepaid problem Dear All, I am new in SER and B2BUA, and I have a problem now UA1----SER----B2BUA----Freeradius | | UA2 if i use the configure in b2bua-cfg.xml <Billing_Server> <Address>radius.xxx.com</Address> <Authentication_Port>1813</Authentication_Port> <Accounting_Port>1813</Accounting_Port> <Password>password</Password> </Billing_Server> it will show the log in the radius server, when UA1 called to UA2 rad_recv: Access-Request packet from host 140.110.20.55:1024, id=0, length=68 Authentication-Request sent to a non-authentication port from client b2bua:1024 - ID 0 : IGNORED so , i change the configure in b2bua-cfg.xml <Billing_Server> <Address>radius.xxx.com</Address> <Authentication_Port>1812</Authentication_Port> <Accounting_Port>1813</Accounting_Port> <Password>password</Password> </Billing_Server> when UA1 called to UA2 , caller show the log "Number does not exist Call rejected : 404 not found" Can anyone help me? John Hsu

18 years

[Serusers] how can I set up the SER and Asterisk in two Linux servers?

by Josh Zhou

Hi, I am new to the VoIP. My plan is to have SER in one Linux server, and have Asterisk in the other Linux server. Can you share your experience with me what I should do with the configuration file in the SER and Asterisk? So that SER and Asterisk can interwork together. Thanks a lot. Josh

18 years

[Serusers] ser 0.9.3 crash

by Tulika Pradhan

on my machine, ser 0.9.3 crashes as soon as a UA sends REGISTER message on doing gdb ser corefile i get the following when calling 'bt' (gdb) bt #0 qm_malloc (qm=0x8107e00, size=760) at mem/q_malloc.c:290 #1 0x0806ce0e in receive_msg ( buf=0x80d6560 "REGISTER sip:194.255.1.199:5060 SIP/2.0\r\nFrom: <sip:88515356@194.255.1.199>;tag=ccd4c5cb-13c4-2838-9d1b45-6d9e\r\nTo: <sip:88515356@194.255.1.199>\r\nCall-ID: ccd4c5cb-13c4-2838-9d1b45-7a20\r\nCSeq: 1 REGIS"..., len=437, rcv_info=0xbfed0fe0) at receive.c:92 #2 0x0808421c in udp_rcv_loop () at udp_server.c:458 #3 0x0805ceaf in main_loop () at main.c:1032 #4 0x0805e50b in main (argc=2, argv=0xbfed11a4) at main.c:1568 (gdb) print h $9 = 0 please help, note that a similar setup on another machine works just fine. tulika

18 years

[Users] Re: Persistent Data Storage

by Klaus Darilion

Hi! Please send your emails to the list. This way others can help you too, and others will also benefit. In Openser, all DB task will be done via openser's DB layer. Thus, the modules do not have to take care of the used DB. Under the DB layer, there are the DB drivers: There is at the moment mysql, postgresql and unixodbc. When configuring openser, you only have to use the proper configuration, thus use "postgres://..." isntead of "mysql://...." For setting up the database, use the openser_postgresql.sh script. For setting up openser in general, please refer to the Gettign Started Tutorial on onsip.org regards klaus voiceoverip wrote: > Hi Klaus, > > forgive me for being a nuisance:) I've tried google and Openser manuals, > haven't been able to find any revelant Openser setup guide with > PostgreSQL, would be glad if you can point me to any online reference(s). > > Also, I assume that by native, you meant the client interface to the > underlying DB platform. Therefore, Postgres support would still be > essentially modular? > > Thanks for your patience. > > Regards > > Klaus Darilion writes: > > voiceoverip wrote: > >> Hi Klaus, > >> thanks for your advice, will check it out. Can i say that MySQL support > >> is native? Mind if i ask what major difference(s) between modular and > >> native support? > > > > mysql and postgres have native support. Both works well. I've never > tried > > the unixodbc yet. > > > > regards > > klaus > > > >> Regards > >> voiceoverip > >> Klaus Darilion writes: > >> > voiceoverip wrote: > >> >> Hi, > >> >> I am new to OpenSER. > >> >> As noted in the installation notes(Persistent Data Storage) - "you > >> need > >> >> to make sure MySQL is installed on your box". Guess other > backends(in > >> >> particular PostgreSQL) are not supported. If true, wonder if > there are > >> >> plans to support other backends. Thanks. > >> > > >> > Take a look at the modules directory. There is already postgresql and > >> > unixodbc. > >> > > >> > There is also native oralce support in ser's experimental tree. > >> > > >> > regards > >> > klaus > >> ________________________________ > >> Free POP3 Email from www.gawab.com > >> Sign up NOW and get your account @gawab.com!! > > > ________________________________ > Free POP3 Email from www.gawab.com <http://www.gawab.com> > Sign up NOW and get your account @gawab.com!!

18 years

RE: [Serusers] Ser as a presence server with other SIP proxy asregistrar and rtp proxy

by İlker Aktuna (Koç.net)

Hi again, I think I've found the problem. The client doesn't receive the packet from server because of network problems. So I had to change the SIP port of my SIP Proxy to 5061 Now , following forward command does not work (SER still sends to 5060) , why ? if (!t_forward_nonack("193.243.202.97", 5061)) { log(1, "forward failed\n"); t_reply("500", "Forward failed"); } Thanks, ilker ________________________________ From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of İlker Aktuna (Koç.net) Sent: Friday, March 31, 2006 3:21 PM To: Vaclav Kubart Cc: serusers(a)lists.iptel.org Subject: RE: [Serusers] Ser as a presence server with other SIP proxy asregistrar and rtp proxy Hi Vaclav, Thanks for the information. I changed my configuration for REGISTER messages and they were forwarded to my SIP proxy. But the clien't can't connect. I think that's because of authentication requirement on my SIP proxy. When I make the client connect directly to my SIP proxy I see the following SIP header on it: 12:09:22.967260: SIP: 193.243.202.97:5060 << 85.105.102.167:8359 payload: 792 bytes REGISTER sip:193.243.202.97 SIP/2.0 Via: SIP/2.0/UDP 192.168.2.6:8359;branch=z9hG4bK-d87543-c2540260b6061b1e-1--d87543-;rport Max-Forwards: 70 Contact: <sip:200000900568888888@192.168.2.6:8359;rinstance=c314db726308b27a> To: "900568888888"<sip:200000900568888888@193.243.202.97> From: "900568888888"<sip:200000900568888888@193.243.202.97>;tag=f72f1c2c Call-ID: 2748934b5d115c55@TkVUV09SS1lPTi5jb21wYW55MS50c3Q. CSeq: 2 REGISTER Expires: 3600 Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO Supported: eventlist User-Agent: eyeBeam release 3014w stamp 26359 Authorization: Digest username="200000900568888888",realm="NcxSip",nonce="48058627",uri="sip:193.243.202.97",response="92be0838ca4f794d23d4bb3d34e12aa9",algorithm=MD5 Content-Length: 0 But if I make the client connect to SER and then forward the REGISTER message to my SIP proxy, I see the following SIP header arriving: 12:16:42.263635: SIP: 193.243.202.97:5060 << 193.243.207.107:10003 payload: 716 bytes REGISTER sip:193.243.202.97 SIP/2.0 Via: SIP/2.0/UDP 10.100.100.15;branch=z9hG4bKcee1.8c792d45.0 Via: SIP/2.0/UDP 192.168.2.6:8359;received=85.105.102.167;branch=z9hG4bK-d87543-aa1ee14dcf543535-1--d87543-;rport=10002 Max-Forwards: 16 Contact: <sip:200000900568888888@192.168.2.6:8359;rinstance=2c28e04a9c62f011> To: "900568888888"<sip:200000900568888888@193.243.202.97> From: "900568888888"<sip:200000900568888888@193.243.202.97>;tag=d37fe827 Call-ID: 6d7923631c258f31@TkVUV09SS1lPTi5jb21wYW55MS50c3Q. CSeq: 1 REGISTER Expires: 3600 Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO Supported: eventlist User-Agent: eyeBeam release 3014w stamp 26359 Content-Length: 0 It seems that when the SIP message is forwarded through SER, the Authorization information is missing. How can I make SER to forward the message without modifying the message ? Also how can I modify user and domain information for the forwarded messages ? Thanks, ilker -----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Sent: Friday, March 31, 2006 8:37 AM To: İlker Aktuna (Koç.net) Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] Ser as a presence server with other SIP proxy as registrar and rtp proxy Hi, your solution is possible - separated presence server from other SIP communication. For forwarding you need cfg like this: if (method=="...") { # here put method name which should be forwarded if (!t_newtran()) { log(1, "newtran error\n"); sl_reply_error(); break; }; if (!t_forward_nonack("machine.domain.com", 5060)) { log(1, "forward failed\n"); t_reply("500", "Forward failed"); } break; } I'm using SER as proxy and other SER as presence server. Proxy forwards presence related messages to presence server, it looks like: C "-//W3C//DTD HTML 4.0 Transitional//EN"> Hi again, I think I've found the problem. The client doesn't receive the packet from server because of network problems. So I had to change the SIP port of my SIP Proxy to 5061 Now , following forward command does not work (SER still sends to 5060) , why ? if (!t_forward_nonack("193.243.202.97", 5061)) { log(1, "forward failed\n"); t_reply("500", "Forward failed"); } Thanks, ilker ________________________________ From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of İlker Aktuna (Koç.net) Sent: Friday, March 31, 2006 3:21 PM To: Vaclav Kubart Cc: serusers(a)lists.iptel.org Subject: RE: [Serusers] Ser as a presence server with other SIP proxy asregistrar and rtp proxy Hi Vaclav, Thanks for the information. I changed my configuration for REGISTER messages and they were forwarded to my SIP proxy. But the clien't can't connect. I think that's because of authentication requirement on my SIP proxy. When I make the client connect directly to my SIP proxy I see the following SIP header on it: 12:09:22.967260: SIP: 193.243.202.97:5060 << 85.105.102.167:8359 payload: 792 bytes REGISTER sip:193.243.202.97 SIP/2.0 Via: SIP/2.0/UDP 192.168.2.6:8359;branch=z9hG4bK-d87543-c2540260b6061b1e-1--d87543-;rport Max-Forwards: 70 Contact: <sip:200000900568888888@192.168.2.6:8359;rinstance=c314db726308b27a> To: "900568888888"<sip:200000900568888888@193.243.202.97> From: "900568888888"<sip:200000900568888888@193.243.202.97>;tag=f72f1c2c Call-ID: 2748934b5d115c55@TkVUV09SS1lPTi5jb21wYW55MS50c3Q. CSeq: 2 REGISTER Expires: 3600 Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO Supported: eventlist User-Agent: eyeBeam release 3014w stamp 26359 Authorization: Digest username="200000900568888888",realm="NcxSip",nonce="48058627",uri="sip:193.243.202.97",response="92be0838ca4f794d23d4bb3d34e12aa9",algorithm=MD5 Content-Length: 0 But if I make the client connect to SER and then forward the REGISTER message to my SIP proxy, I see the following SIP header arriving: 12:16:42.263635: SIP: 193.243.202.97:5060 << 193.243.207.107:10003 payload: 716 bytes REGISTER sip:193.243.202.97 SIP/2.0 Via: SIP/2.0/UDP 10.100.100.15;branch=z9hG4bKcee1.8c792d45.0 Via: SIP/2.0/UDP 192.168.2.6:8359;received=85.105.102.167;branch=z9hG4bK-d87543-aa1ee14dcf543535-1--d87543-;rport=10002 Max-Forwards: 16 Contact: <sip:200000900568888888@192.168.2.6:8359;rinstance=2c28e04a9c62f011> To: "900568888888"<sip:200000900568888888@193.243.202.97> From: "900568888888"<sip:200000900568888888@193.243.202.97>;tag=d37fe827 Call-ID: 6d7923631c258f31@TkVUV09SS1lPTi5jb21wYW55MS50c3Q. CSeq: 1 REGISTER Expires: 3600 Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO Supported: eventlist User-Agent: eyeBeam release 3014w stamp 26359 Content-Length: 0 It seems that when the SIP message is forwarded through SER, the Authorization information is missing. How can I make SER to forward the message without modifying the message ? Also how can I modify user and domain information for the forwarded messages ? Thanks, ilker -----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Sent: Friday, March 31, 2006 8:37 AM To: İlker Aktuna (Koç.net) Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] Ser as a presence server with other SIP proxy as registrar and rtp proxy Hi, your solution is possible - separated presence server from other SIP communication. For forwarding you need cfg like this: if (method=="...") { # here put method name which should be forwarded if (!t_newtran()) { log(1, "newtran error\n"); sl_reply_error(); break; }; if (!t_forward_nonack("machine.domain.com", 5060)) { log(1, "forward failed\n"); t_reply("500", "Forward failed"); } break; } I'm using SER as proxy and other SER as presence server. Proxy forwards presence related messages to presence server, it looks like: <http://387555.sigclick.mailinfo.com/sigclick/03090F04/06044907/014D0A101813…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

18 years

[Users] Behavior of next_gw

by Florian Fainelli

Hello, I would like to know what is the default behavior when using next_gw(). Here is basic example : A call is coming to gw 1, gateway no 1 rejects it, the next gateway is gw2, is this call forwarded to gw2 and so on ... ? Thank you very much in advance for your answer. Florian

18 years

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users April 2006