sr-users November 2006

sr-users@lists.kamailio.org

189 participants
307 discussions

[Serusers] OptiPoint420 behind a NAT device
by hiSIPatH 25 Nov '06

25 Nov '06

Hi all, i have a ser setup (CentOS 4.4/ser 0.9.6) with several ip phones (SNOM320 and Xlite30) and every thing seems to work fine. The ser server has a public ip address 89.xxx.xxx.xxx and the ua are behind a NAT device (corporate FW). I want now to add some OptiPoint420 SIP but was unable to get them working. That means that the registration is ok and calls to the Optipoints from other ua (xlite or Snom) work but i was unable to place a call from Optipoint to other ua. In the trace you can notice that the INVITE is sent to ser with Src Port 38625 and Dst Port 5060. But the response from ser is sent to Src Port: 5060 (5060), Dst Port: 5060 (5060). The result is of couse ICMP Destination unreachable (Port unreachable). I have rtp proxy and ser running on the same server and my ser.cfg looks like the one from the SER GettingStarted http://siprouter.onsip.org/doc/gettingstarted/ch08s02.html). I read the doc about "handling of NAT using RTP Proxy" but was unable to change the config to get this scenario with OptiPoint working. Has anyone managed to get OptiPoint to work with ser? thx in advance? No. Time Source Destination Protocol Info 14 8.907171 89.xxx.xxx.xxx 89.xxx.xxx.xxx SIP/SDP Request: INVITE sip:8001@registrar.mydomaine.com;transport=udp, with session description Frame 14 (972 bytes on wire, 972 bytes captured) Ethernet II, Src: AminoCom_02:02:02 (00:02:02:02:02:02), Dst: AcerTech_9c:00:8d (00:00:e2:9c:00:8d) Internet Protocol, Src: 89.xxx.xxx.xxx (89.xxx.xxx.xxx), Dst: 89.xxx.xxx.xxx (89.xxx.xxx.xxx) User Datagram Protocol, Src Port: 38625 (38625), Dst Port: 5060 (5060) Session Initiation Protocol No. Time Source Destination Protocol Info 15 8.907394 89.xxx.xxx.xxx 89.xxx.xxx.xxx SIP Status: 407 Proxy Authentication Required Frame 15 (772 bytes on wire, 772 bytes captured) Ethernet II, Src: AcerTech_9c:00:8d (00:00:e2:9c:00:8d), Dst: AminoCom_02:02:02 (00:02:02:02:02:02) Internet Protocol, Src: 89.xxx.xxx.xxx (89.xxx.xxx.xxx), Dst: 89.xxx.xxx.xxx (89.xxx.xxx.xxx) User Datagram Protocol, Src Port: 5060 (5060), Dst Port: 5060 (5060) Session Initiation Protocol

4 6

[Serusers] How to enable the verbose log?
by Bin Chen 25 Nov '06

25 Nov '06

Hi, I am using ser-0.9.6, my client has some problems with it so I need to look some log of ser to find out why my request is rejected. I looked the source of ser and seems it use syslog, but I don’t know how to enable it, through config file or specify at compile time? Thanks a lot. Binary Chen

2 1

[Users] VOIP Consultants wanted to build a Scalable ITSP Architecture Using OpenSource Softwares
by Shanti kishore Balusu 25 Nov '06

25 Nov '06

Hello Guys We are looking for VOIP Cosultants who can successfully build A Scalable ITSP Architecture Using OpenSource Softwares something like http://www.skyyconsulting.com/itsp_voip_asterisk.php. we are looking for some body who can design & build a scallable highly redundant sollution with billing which can handle 2000-5000 calls per second. we use ILBC for SIP-SIP & GSM for PSTN. Most of our PSTN hardware is Quintums & Cisco Hardware. Servers in use Dell 1850,1950,2950. we need u to give us the complete source code of what u r deploying on our servers(Very Important). UA can be a Softphone or a IP Phone or a PDA with VOIP(wifi). If u think u can a provide a good sollution for our requirement at a low cost please contact me offlist with ur sollution & pricing.. Thanx & Regards Kishore Chowdary

1 0

[Serusers] VOIP Consultants wanted to build a Scalable ITSP Architecture Using OpenSource Softwares
by Shanti kishore Balusu 25 Nov '06

25 Nov '06

1 0

[Serusers] Call Transfers in SER + Asterisk
by Arun Kumar 25 Nov '06

25 Nov '06

HI, I want to transfer calls from SER to Asterisk but I'm not able to do it. So, please guide me. Here is my ser.cfg and other config files please guide me. my trusted table contiains a record of my asterisk ip : asterisk ip any * ser.cfg ------------------ debug=5 fork=no log_stderror=yes listen=2xx.xxx.xxx.xxx # INSERT YOUR IP ADDRESS HERE port=5060 children=4 dns=no rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:mypass@localhost/ser" loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" loadmodule "/usr/lib/ser/modules/uri.so" loadmodule "/usr/lib/ser/modules/uri_db.so" loadmodule "/usr/lib/ser/modules/domain.so" loadmodule "/usr/lib/ser/modules/mediaproxy.so" loadmodule "/usr/lib/ser/modules/nathelper.so" loadmodule "/usr/lib/ser/modules/textops.so" loadmodule "/usr/lib/ser/modules/avpops.so" loadmodule "/usr/lib/ser/modules/permissions.so" modparam("auth_db|permissions|uri_db|usrloc|domain", "db_url", " mysql://ser:mypass@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "natping_interval", 0) modparam("mediaproxy","natping_interval", 30) modparam("mediaproxy","mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("mediaproxy","sip_asymmetrics","/etc/ser/sip-clients") modparam("mediaproxy","rtp_asymmetrics","/etc/ser/rtp-clients") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) modparam("tm", "fr_inv_timer", 27) modparam("tm", "fr_inv_timer_avp", "inv_timeout") modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") # ------------------------- request routing logic ------------------- # main routing logic route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method=="INVITE" && client_nat_test("3")) { # INSERT PROXY IP ADDRESS HERE record_route_preset(" 2xx.xxx.xxx.xxx:5060;nat=yes"); } else if (method!="REGISTER") { record_route(); }; # ----------------------------------------------------------------- # Call Tear Down Section # ----------------------------------------------------------------- if (method=="BYE" || method=="CANCEL") { end_media_session(); }; # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { if ((method=="INVITE" || method=="REFER") && !has_totag()) { sl_send_reply("403", "Use From=ID"); break; }; if (method=="INVITE") { if (!allow_trusted()) { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "user From=ID"); break; }; consume_credentials(); }; if (client_nat_test("3") || search("^Route:.*;nat=yes")){ setflag(6); use_media_proxy(); }; }; route(1); break; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (!is_uri_host_local()) { if (is_from_local() || allow_trusted()) { route(4); route(1); } else { sl_send_reply("403", "Forbidden-two"); }; break; }; if (method=="ACK") { route(1); break; } if (method=="CANCEL") { route(1); break; } else if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; }; lookup("aliases"); if (!is_uri_host_local()) { route(4); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ----------------------------------------------------------------- sl_send_reply("100", "Trying"); if (!search("^Contact:[ ]*\*") && client_nat_test("7")) { setflag(6); fix_nated_register(); force_rport(); }; if (!www_authorize("","subscriber")) { www_challenge("","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (client_nat_test("3")) { setflag(7); force_rport(); fix_nated_contact(); }; if (!allow_trusted()) { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); }; lookup("aliases"); if (!is_uri_host_local()) { route(4); route(1); break; }; if (uri=~"^sip:011[0-9]*@") { route(4); route(5); break; }; if (!lookup("location")) { if (uri=~"^sip:[0-9]{10}@") { route(4); route(5); break; }; sl_send_reply("404", "User Not Found"); break; }; route(4); route(1); } route[4] { # ----------------------------------------------------------------- # NAT Traversal Section # ----------------------------------------------------------------- if (isflagset(6) || isflagset(7)) { if (!isflagset(8)) { setflag(8); use_media_proxy(); }; }; } route[5]{ rewritehost("Asterisk Server IP"); avp_write("i:45", "inv_timeout"); route(1); } onreply_route[1] { if ((isflagset(6) || isflagset(7)) && (status=~"(180)|(183)|2[0-9][0-9]")) { if (!search("^Content-Length:[ ]*0")) { use_media_proxy(); }; }; if (client_nat_test("1")) { fix_nated_contact(); }; } ---------------------------------- sip.conf ---------------- [general] port = 5060 ; Port to bind to (SIP is 5060) bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine) context = default maxexpirey=180 defaultexpirey=160 autocreatepeer=yes register => 1000:test@2xx.xxx.xxx.xxx/5678 [ser] type=friend username=1000 secret=test fromdomain=2xx.xxx.xxx.xxx host=2xx.xxx.xxx.xxx [5678] type=friend username=5678 host=dynamic canreinvite=no --------------------------- exte.conf exten => 5678,1,Dial(SIP/5678,20) exten => 5678,2,Voicemail2(u5678) exten => 5678,3,MusicOnHold() exten => 5678,102,Voicemail2(b5678) exten => 5678,103,Hangup Nothing is happeing in my case that is I dont see any packet coming from ser to asterisk for asterisk to ser. please guide me. thanks for your reply. arun

1 0

Re: [Serusers] Problem with MTU size in SER with MIPv6.
by Andrei Pelinescu-Onciul 24 Nov '06

24 Nov '06

On Nov 24, 2006 at 11:45, Jose Angel Calvo <jacc15dkz(a)yahoo.es> wrote: > Thanks for your fast answer, Andrei. I answer to your questions: > > > Could you give more details? > Of course :-) > > - what version of ser are you running (ser -V)? > The exit in my screen are: > version: ser 0.9.6 (i386/linux) > flags: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT > ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 > @(#) $Id: main.c,v 1.197.2.1 2005/07/25 16:56:24 andrei Exp $ > main.c compiled on 11:38:44 Feb 1 2006 with gcc 3.3.6 > > > - is it vanilla ser or a modified version? > It's a vanilla version. > > - the packet is sent over TCP? UDP? > Over UDP. > > - a coredump backtrace? (for this you'll have to start ser with > > -w directory_where_core_can_be_written, e.g. ser -f ser.cfg -w /tmp/) > > After the crash, run gdb path_to_ser/ser /tmp/core, type bt > > and send me the output. Note: the core file might have another name > > (e.g. core.3456). Just look for core.* . > I do what you say me, but thre is not a coredump backtrace. Next, i show you the syslog: Could you try again after runing: ulimit -c unlimited # you need bash for this ser -f ser.cfg -w /tmp/ (or if unlimited doesn't work, some large value, e.g. ulimit -c 100000) ? If it still doesn't work, could you send me a network dump with the INVITE causing the crash and your config, so that I can try to reproduce it? Thanks, Andrei

1 0

[Serusers] Sip-Conf-Id Label
by Gustavo Passos Tourinho 24 Nov '06

24 Nov '06

Hey There! I was wondering how ser calculates Sip-Conf-Id that apears in Radius Details file? Thanks in advanced, Tourinho

1 0

[Users] How can I obtain the first two digits of the header From?
by Jose Gil Navarrete 24 Nov '06

24 Nov '06

Hi. I need to obtain the first two o three digits of the header From and add them to uri? It's, because the telephones make the register with ten digits (area-code + telephone number), then in the call, the telephone sends the invites with 7 or 8 digits, it's because they don't use area code. thanks in advance. --------------------------------- Do You Yahoo!? La mejor conexión a Internet y 2GB extra a tu correo por $100 al mes. http://net.yahoo.com.mx

2 2

[Serusers] Variabilized a data into ser.cfg
by inge 24 Nov '06

24 Nov '06

Hi all, I want to change the host of my PSTN gateway according to certain conditions. But in the aim of not rewrite all routes wich don't change (just PSNT host sometimes) I want to variabilize this data. Is it possible to do something like : if {} => gw=w.x.y.z else => gw=z.y.x.w Next in the routing plan : ... rewritehost(gw); ... ? Thanks for your help.

2 1

[Users] Billing system with good integration with OpenSER / Documentations
by Nick De Cristofaro 24 Nov '06

24 Nov '06

Hey everyone, Good sessions yesterday at the OpenSER summit. I found the presentations very insightful and I learned a lot of new things. I am hoping to get some feedback as a good solution for a billing system that we will need to implement over here in our company that can be easily interacted through OpenSER. As I am pretty new to this I am wondering what component pieces should be setup to do this right. OpenSER as our main SIP router with database access and creating CDRs or do we need a B2BUA with this? Can anyone recommend some good starting point to look into or some publishings that would be a good read to get more insight on building this right. Some of the presentations had some good insights on scaling, redundencies and so forth and we would like to do this right from the beginning and look at our cost platforms. Anyone ever used the Hiper biling system? I saw their exhibit yesterday and it was pretty nice. Thanks Nick

2 1

← Newer
1
...
6
7
8
9
10
11
12
...
31
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users November 2006