sr-users January 2006

sr-users@lists.kamailio.org

134 participants
258 discussions

[Serusers] features-callfwd.5.0.cfg produces syntax errors running latest CVS

by Kim Culhan

Are there any example configuration files which will work with ser from the latest CVS ? I have been using a configuration based on features-callfwd.5.0.cfg This appears to be unuseable with ser from CVS as it returns: Jan 28 16:23:13 test ser: parse error (16,1-5): syntax error Jan 28 16:23:13 test ser: parse error (16,5-6): unknown config variable Jan 28 16:23:13 test ser: parse error (17,12-13): unknown config variable Jan 28 16:23:13 test ser: parse error (19,1-11): Any help fixing the syntax errors and config vars is greatly appreciated, how can I trace the sources of these errors in the config file ? -kim -- w8hdkim(a)gmail.com

18 years, 10 months

Re: [Serusers] failover and VRRP

by hgaillac-sip＠yahoo.fr

Is it the best way ? Which solution would be able to check the ser availability bfore estabilsh the connections SER2 sip agents===DNS servers==[the solutions ??]== SER1 Harry --- sip <sip(a)arcdiv.com> a écrit : > We use Coyote Point load balancers (good, relatively > cheap, hardware > load-balancers) that monitor the connectivity to the > SER server. The problem > is that it ONLY monitors connectivity, so if your > SER is still accepting > connections to the socket, but then not working > correctly, it doesn't know the > difference. > > Our SER works off a centrally-shared DB instead of a > replicated one (mysql > running from a SAN connected to both machines > through a SAN switch). That way, > if one of the servers goes down, the other one > picks up as if nothing ever > happened. > > SER does not have stateful connections from the UA, > so if the server gets > switched in the middle of a conversation, it will > cut the conversation off... > but at least there will still be a server active for > additional connections. > > N. > > > On Tue, 31 Jan 2006 13:24:00 +0100 (CET), > hgaillac-sip wrote > > Do you know a solution !? > > > > Harry > > --- sip <sip(a)arcdiv.com> a écrit : > > > > > Right. VRRP is for layer 2/3 but it's for > routing > > > purposes. > > > > > > If you want to handle the application layer with > > > failover, you need a > > > load-balancer of some sort. That way, if one SER > > > dies, the load balancer sends > > > data on to the other one. > > > > > > N. > > > > > > On Tue, 31 Jan 2006 12:37:56 +0100 (CET), > > > hgaillac-sip wrote > > > > Hello, > > > > > > > > I think vrrp handle layer 2/3 not sip > application > > > what > > > > do you advise me ? > > > > > > > > Harry > > > > > > > > --- sip <sip(a)arcdiv.com> a écrit : > > > > > > > > > Sure. You can even use VRRP if there's no > SER in > > > > > your network. I'm not sure > > > > > what that has to do with SER, though. > > > > > > > > > > VRRP is router-side. > > > > > > > > > > N. > > > > > > > > > > > > > > > On Tue, 31 Jan 2006 10:32:03 +0100 (CET), > > > > > hgaillac-sip wrote > > > > > > hello, > > > > > > > > > > > > Can we use VRRP when a SER is down ? > > > > > > > > > > > > SER1 (master) > > > > > > sip agents == || === Asterisk > Farm==sip/pstn > > > > > gateway > > > > > > SER2 (slave) > > > > > > > > > > > > Regards > > > > > > Harry > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ___________________________________________________________________________ > > > > > Nouveau : téléphonez moins cher avec Yahoo! > > > > > Messenger ! Découvez les tarifs > > > > > exceptionnels pour appeler la France et > > > > > l'international. Téléchargez sur > > > > > http://fr.messenger.yahoo.com > > > > > > > > > > > > > > > _______________________________________________ > > > > > > Serusers mailing list > > > > > > serusers(a)lists.iptel.org > > > > > > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ___________________________________________________________________________ > > > Nouveau : téléphonez moins cher avec Yahoo! > > > Messenger ! Découvez les tarifs > > > exceptionnels pour appeler la France et > > > l'international. Téléchargez sur > > > http://fr.messenger.yahoo.com > > > > > > > > > > > > > > > > > > > ___________________________________________________________________________ > Nouveau : téléphonez moins cher avec Yahoo! > Messenger ! Découvez les tarifs > exceptionnels pour appeler la France et > l'international. Téléchargez sur > http://fr.messenger.yahoo.com > > ___________________________________________________________________________ Nouveau : téléphonez moins cher avec Yahoo! Messenger ! Découvez les tarifs exceptionnels pour appeler la France et l'international. Téléchargez sur http://fr.messenger.yahoo.com

18 years, 10 months

[Serusers] ser and asterisk

by preeti j

hello, I am able to issue 302 redirect from ser to asterisk.is it possible to redirect calls to a realtime peer registerd on asterisk. please help me with config requirement.cldn't find anything in the docs relating to realtime. Thanks, Preeti --------------------------------- Do you Yahoo!? With a free 1 GB, there's more in store with Yahoo! Mail.

18 years, 10 months

[Serusers] SER Presence

by Akeru Ikena

Hi Vaclav, > In the config in handling PUBLISH request call handle_publish instead of > handle_subscription. Woops, right, thanks alot. Here are some details, I'm using SER 0.9.6 Unstable from debian package (http://ftp.iptel.org/pub/ser/0.9.6/packages/debian/unstable/) If I add one of these parameters in ser.cfg file, modparam("pa", "auth", "none") modparam("pa", "winfo_auth", "none") modparam("pa", "auth_xcap_root", "http://localhost/xcap-root") I get this error : ERROR: bad config file (1 errors) Erreur de segmentation And when using PUA.pl to test this, I always received a closed presence state. Do you have any idea ? Cheers, Akeru.

18 years, 10 months

[Serusers] failover and VRRP

by hgaillac-sip＠yahoo.fr

hello, Can we use VRRP when a SER is down ? SER1 (master) sip agents == || === Asterisk Farm==sip/pstn gateway SER2 (slave) Regards Harry ___________________________________________________________________________ Nouveau : téléphonez moins cher avec Yahoo! Messenger ! Découvez les tarifs exceptionnels pour appeler la France et l'international. Téléchargez sur http://fr.messenger.yahoo.com

18 years, 10 months

[Serusers] Monitoring

by hgaillac-sip＠yahoo.fr

Hi asterisk and ser users, Is there a solution to monitor asterisk and ser with snmp ? Regards Harry ___________________________________________________________________________ Nouveau : téléphonez moins cher avec Yahoo! Messenger ! Découvez les tarifs exceptionnels pour appeler la France et l'international. Téléchargez sur http://fr.messenger.yahoo.com

18 years, 10 months

Re: [Serusers] Problem with SerWeb

by mkumar＠mantragroup.com

Hi Karel Kozlik, Thanks for the reply. Initially I tried using serweb admin mode but for me only the initial page http://www.mantragroup.com/serweb/html/admin/users.php is displayed from there if I hit on admin privileges or server monitoring or user preferences nothing opens, it still shows the same initial page of admin login. Thanks, Manoj. Quoting Karel Kozlik <karel(a)iptel.org>: > Hi, > please (CC) the forum in your replies in order to others can read the > answers. > > To your problem: > the correct values to allow change ACL are: > > priv_name: acl_control > priv_value: int > > priv_name: acl_control > priv_value: ld > > priv_name: acl_control > priv_value: local > > But you realy do not need to know this! > > Instead of changeing values in DB you can simply login to serweb as admin: > - click to tab 'admin privileges' > - click to link 'changes privilges' for user 'admin' > - mark the checkboxes in 'ACL control' area > - click to 'save' > > Now you should be able to change ACL of other users. > > Karel > > > > mkumar(a)mantragroup.com napsal(a): >> Hi Karel Kozlik, >> >> I really do not know what are the correct values that must be given under >> priv_name, for admin I gave is_admin, change_privileges and for giving acl >> permissions I tried giving local,ld,acl_ld,acl_local but none worked and I >> still get "You haven't any privileges to control ACL" when I log in >> to admin, >> can you please give me syntax which grants acl change privilges to admin. I >> tried searching on net and doc which came with installation but none >> helped me. >> Please spare a minute and help me configure serweb. >> >> Thanks, >> Manoj. >> >> Quoting Karel Kozlik <karel(a)iptel.org>: >> >>> Hi, >>> that is OK. You can have more admins in serweb. And you can define >>> privileges for changeing ACL for each admin. To do that, click to >>> tab 'admin privileges' and select 'change privileges' for some >>> admin. Here you may define which values of ACL this admin may >>> change. >>> >>> Karel >>> >>> mkumar(a)mantragroup.com napsal(a): >>> >>>> Hi All, >>>> >>>> I was able to install serweb and login to it both from admin and >>>> user end. But >>>> in admin end I have a problem, when I hit on ACL of any user that >>>> appered when >>>> I first login as admin, I get a error "You haven't any privileges >>>> to control >>>> ACL". In the DataBase I gave the following privileges to admin >>>> >>>> username admin >>>> domain mantragroup.com >>>> priv_name change_privileges >>>> priv_value 1 >>>> >>>> username admin >>>> domain mantragroup.com >>>> priv_name change_privileges >>>> priv_value 1 >>>> >>>> Someone please help me and guide me to inderstand where I am going wrong. >>>> >>>> Thanks, >>>> Manoj >>>> >>>> >>>> _______________________________________________ >>>> Serusers mailing list >>>> serusers(a)lists.iptel.org >>>> http://lists.iptel.org/mailman/listinfo/serusers >>> >>> >> >> >> >

18 years, 10 months

[Users] loose_route()

by JF

Hi, One of my (Open)SER machines (P1) is acting as registrar and so I have alias=mydomain.tld in the script; it is used in the (uri == myself) check to handle REGISTER requests. I have a setup like this: UA1 (user1(a)mydomain.tld) - P2 - P1 - P3 - P1 - P2 - UA2 (user2(a)mydomain.tld) (all proxies are record-routing except P3) For initial requests (INVITE from UA1 to UA2) all is fine. But I'm having problems with the loose_route() function, because when an in-dialog (subsequent) request comes into P1 (from UA1, P2) with a Route header containing (<P1>, <P1>, <P2>), the after_strict() function is called, when I would expect the after_loose() function to be called since P1 is a loose router. Within loose_route(), is_preloaded() returns 0, which is correct. But then is_myself returns true because of the alias... Is this a bug in loose_route() which doesn't account for this kind of setup (Routeing in-dialog requests through the registrar)? Maybe this could be avoided, if there was a parameter forcing loose_route to treat previous hop as a loose router... Or am I just doing something wrong? Thanks in advance, JF

18 years, 10 months

[Users] Path

by Helge Waastad

Hi, just a few questions regarding the path implementation (if someone cares to answer, taht is ;-)) I've read through the RFC3327 (I hope) If I have a scenario: UAC->OBP->Registrar (th OB is a dispatcher) In the current version, should I append_hf both: Supported: path and a Path: <sip:[OBP];lr> to make it work? I tried. I get a P-Registrar-Error: Path parse error and in my log: ERROR: build_path_vector(): First Path URI is not a loose-router, not supported I guess I might have a configuration error, but do not really know. br hw

18 years, 10 months

[Users] Can openser put a Contact header in a response when behave as UAS?

by Jose Antonio Garvayo

Hi, I want to use the openser as a UAS on behalf of a user that's not registered. There's a proxy in the middle that receives an INVITE and find that the user is not registered, and rely the INVITE to the openser. I want the openser to send a 200 OK response, but also to put a Contact in the response so the final ACK will be send also to the openser. I have tried the following: append_hf("Contact: xxxxx:pp"); if (t_newtran()) { xlog("UAS logic"); append_hf("Contact: xxxxx:pp"); t_reply("200","OK"); append_hf("Contact: xxxxx:pp"); } else sl_reply_error(); But still no Contact appears in the 200 OK response. Thanks

18 years, 10 months

← Newer
1
2
3
4
5
6
7
8
9
...
26
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users January 2006