sr-users July 2005

sr-users@lists.kamailio.org

199 participants
544 discussions

by Muhammad Nuzaihan Kamalluddin

Thanks harry,Andrei for the invaluable help, it now works, however it stalls, i can see it's connecting (using debug=6) Jul 13 21:15:47 flamejob ser[60891]: Maxfwd module- initializing Jul 13 21:17:49 flamejob /kernel: p:zaihan@unrealasia.net>;tag=274205658410751719 Jul 13 21:39:01 flamejob /kernel: <118: SIP/2.0/UDP 192.168.1.6;branch=z9hG4bK315.6e6d3c66.0 Jul 13 21:39:01 flamejob /kernel: <1ealasia.net>;tag=b42c293d3b69ef4e5d7c66dde268b4d8.10cc the server is flamejob.local.net, and i'm at 192.168.0.100, i tcpdumped all the traffic, grepped flamejob.local.net (i'm not doing anything except SIP to the server).. 22:08:20.973149 IP (tos 0x0, ttl 64, id 31797, offset 0, flags [none], length: 474) 192.168.0.100.sip > flamejob.local.net.sip: [udp sum ok] UDP, length: 446 22:08:21.091281 IP (tos 0x10, ttl 63, id 44187, offset 0, flags [none], length: 630) flamejob.local.net.sip > 192.168.0.100.sip: [udp sum ok] UDP, length: 602 22:08:21.322839 IP (tos 0x0, ttl 64, id 31812, offset 0, flags [none], length: 474) 192.168.0.100.sip > flamejob.local.net.sip: [udp sum ok] UDP, length: 446 22:08:21.457945 IP (tos 0x10, ttl 63, id 44257, offset 0, flags [none], length: 631) flamejob.local.net.sip > 192.168.0.100.sip: [udp sum ok] UDP, length: 603 22:09:00.678502 IP (tos 0x0, ttl 64, id 31940, offset 0, flags [none], length: 363) 192.168.0.100.sip > flamejob.local.net.sip: [udp sum ok] UDP, length: 335 22:09:00.683613 IP (tos 0x10, ttl 63, id 44263, offset 0, flags [none], length: 626) On 13 Jul 2005, at 7:11 PM, harry gaillac wrote: > Use nathelper rtpproxy/mediaproxy in nat context > > --- Muhammad Nuzaihan Kamalluddin > <nuzaihan(a)unrealasia.net> a écrit : > > >> Hi, >> >> I have ser 0.9.3 installed on freebsd 4.10, >> everything else seems to >> work fine, except that it says host is down in the >> logs. It happens only >> after i run the softphone to test. I have port >> forwarded (the client's >> behind a NAT) but to no avail. >> >> Jul 13 14:46:05 flamejob ser[38889]: msg_send: >> ERROR: udp_send failed >> Jul 13 14:47:24 flamejob ser[38889]: ERROR: >> udp_send: >> sendto(sock,0x28411478,551,0,0x28408870,16): Host is >> down(64) >> >> and here's my ser.cfg >> >> debug=3 # debug level (cmd line: >> -dddddddddd) >> #fork=yes >> #log_stderror=no # (cmd line: -E) >> >> /* Uncomment these lines to enter debugging mode >> fork=no >> log_stderror=yes >> */ >> >> check_via=no # (cmd. line: -v) >> dns=no # (cmd. line: -r) >> rev_dns=no # (cmd. line: -R) >> port=5060 >> children=4 >> fifo="/tmp/ser_fifo" >> fifo="/tmp/ser_fifo" >> fifo_db_url="mysql://root:password@localhost/ser" >> # ------------------ module loading >> ---------------------------------- >> >> # Uncomment this if you want to use SQL database >> loadmodule "/usr/local/lib/ser/modules/mysql.so" >> >> loadmodule "/usr/local/lib/ser/modules/sl.so" >> loadmodule "/usr/local/lib/ser/modules/tm.so" >> loadmodule "/usr/local/lib/ser/modules/rr.so" >> loadmodule "/usr/local/lib/ser/modules/maxfwd.so" >> loadmodule "/usr/local/lib/ser/modules/usrloc.so" >> loadmodule "/usr/local/lib/ser/modules/registrar.so" >> loadmodule "/usr/local/lib/ser/modules/textops.so" >> >> # Uncomment this if you want digest authentication >> # mysql.so must be loaded ! >> loadmodule "/usr/local/lib/ser/modules/auth.so" >> loadmodule "/usr/local/lib/ser/modules/auth_db.so" >> >> # ----------------- setting module-specific >> parameters --------------- >> >> # -- usrloc params -- >> >> modparam("usrloc", "db_mode", 0) >> >> # Uncomment this if you want to use SQL database >> # for persistent storage and comment the previous >> line >> modparam("usrloc", "db_mode", 2) >> # -- auth params -- >> # Uncomment if you are using auth module >> # >> modparam("auth_db", "calculate_ha1", yes) >> # >> # If you set "calculate_ha1" parameter to yes (which >> true in this config), >> # uncomment also the following parameter) >> # >> modparam("auth_db", "password_column", "password") >> # -- rr params -- >> # add value to ;lr param to make some broken UAs >> happy >> >> >> >> Thanks, >> Zaihan >> >> _______________________________________________ >> Serusers mailing list >> serusers(a)lists.iptel.org >> http://lists.iptel.org/mailman/listinfo/serusers >> >> > > > > > > > > ______________________________________________________________________ > _____ > Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! > Messenger > Téléchargez cette version sur http://fr.messenger.yahoo.com >

18 years, 11 months

[Serusers] Credentials problems with remote MySQl DB

by Daniel Mizrachi (net-uno.net)

Hi, I have a situation really rare with SER 0.8.14 and MySQL 4.0.11. When I run SER and MySQL in the same box a can make and receive calls without problems, but when I split the DB to another box I always receive a message that says: check_username(): Digest username and URI username match 3(15079) query="select grp from grp where username='2127701301' AND grp='local'" 3(15079) is_user_in(): User is not in group 'local' 3(15079) parse_headers: flags=-1 Running a ngrep port 3306 from SER I`d never seen a request to the DB getting out the server even though the SER application says to be executing it. (3(15079) query="select grp from grp where username='2127701301' AND grp='local'") My question: Do I have to set up anything else in ser.cfg or modified any parameter before to compile the aplication to work in diferent boxes ? Best Regards, Daniel Mizrachi

18 years, 11 months

[Serusers] (no subject)

by Yiannis Martis

18 years, 11 months

RE: [Serusers] IM problem.

by Kong

humm.. i fixed those problem, but still my UA can't receive any messages... test UA's are SJPhone, XLite, Window messenger. any idea on that? At 08:30 PM 7/13/2005, you wrote: >You need these lines ! > >Use ethereal for help > >--- Kong <kongzs(a)irepublics.com> a écrit : > > > apparently that happens because of this line. > > > > if (!mf_process_maxfwd_header("16")) { > > sl_send_reply("483", "Too Many Hops !"); > > break; > > }; > > > > but if i comment it out, there is a infinite loop > > happening at the background. > > then it comeout timeout again. > > > > btw, do u have > > modparam("msilo", > > "registrar","sip:registrar@XXXXXX") > > in ur ser.cfg? > > > > At 08:18 PM 7/13/2005, you wrote: > > > > >--- Kong <kongzs(a)irepublics.com> a écrit : > > > > > > > Humm.. that seems to help, but now i got this > > error. > > > > > > > > 483 Too Many Hops > > > > > > > > i wonder how is that.... > > > > do i really need this line? > > > > modparam("msilo", "registrar", > > > > "sip:registrar@XXXXXX") > > > > > >according to doc not really > > > > > > > At 07:08 PM 7/13/2005, you wrote: > > > > >read > > > > http://openser.org/docs/modules/0.9.x/msilo.html > > > > > > > > > > The method stores certain parts of the > > current > > > > SIP > > > > >request (it should be called when the request > > type > > > > is > > > > >MESSAGE and the destination user is offline or > > his > > > > UA > > > > >does not support MESSAGE requests). If the user > > is > > > > >registered with a UA which does not support > > MESSAGE > > > > >requests you should not use mode="0" if you > > have > > > > >changed the request uri with the contact > > address of > > > > >user's UA. > > > > > > > > > >Meaning of the parameters is as follows: > > > > > mode - specifies what to save as R-URI. > > > > >"0" - first check if new_uri is an address of > > > > record. > > > > >If yes, then use it and store it as R-URI, > > > > otherwise > > > > >look at R-URI and, if necessary, at URI from > > "To" > > > > >header. > > > > >"1" - look first at R-URI and then at URI from > > "To" > > > > >header. > > > > >"2" - look only at URI form "To" header. > > > > > > > > > >I have to set IM I use ser/serweb 0.9.3 > > > > > > > > > >Harry > > > > >--- Kong <kongzs(a)irepublics.com> a écrit : > > > > > > > > > > > Tried Windows Messenger, Xlite, SJPhone, > > > > FireFly. > > > > > > > > > > > > modparam("msilo", "registrar", > > > > > > "sip:registrar@XXXXXX") > > > > > > > > > > > > am i suppose to put XXXXXX as my domain? > > > > > > > > > > > > then do i need to create any user call > > > > registrar? > > > > > > > > > > > > At 06:24 PM 7/13/2005, you wrote: > > > > > > >What is your UA ? > > > > > > >--- Kong <kongzs(a)irepublics.com> a écrit : > > > > > > > > > > > > > > > I am trying to implement Messaging from > > > > serweb > > > > > > to > > > > > > > > UA, but not a success. > > > > > > > > > > > > > > > > i have this script in my ser.cfg > > > > > > > > > > > > > > > > if (!lookup("location")) { > > > > > > > > if (method == "MESSAGE") { > > > > > > > > if (!t_newtran()) { > > > > > > > > sl_reply_error(); > > > > > > > > break; > > > > > > > > }; > > > > > > > > > > > > > > > > if (m_store("0")) { > > > > > > > > t_reply("202", "Accepted for > > Later > > > > > > > > Delivery"); > > > > > > > > break; > > > > > > > > }; > > > > > > > > }; > > > > > > > > > > > > > > > > sl_send_reply("404", "User Not > > Found > > > > !"); > > > > > > > > break; > > > > > > > > }; > > > > > > > > > > > > > > > > but i read somewhere in google that i > > need > > > > to > > > > > > add in > > > > > > > > this line. > > > > > > > > modparam("msilo", "registrar", > > > > > > > > "sip:registrar@iptel.org") > > > > > > > > so that the UA will be notify if there > > is > > > > any > > > > > > new > > > > > > > > message. > > > > > > > > > > > > > > > > If i don't add this line, the message > > can be > > > > > > send > > > > > > > > from serweb to the > > > > > > > > account (which stored in SILO) then can > > be > > > > > > checked > > > > > > > > from the recipient > > > > > > > > serweb account. But once i add the > > registrar > > > > > > line > > > > > > > > in, the sending process > > > > > > > > return error code of 405 timeout. can i > > know > > > > > > whats > > > > > > > > the problem here? > > > > > > > > > > > > > > > > i am using ser-0.9.3 > > > > > > > > > > > > > > > > thank you. > > > > > > > > > >_______________________________________________ > > > > > > > > Serusers mailing list > > > > > > > > serusers(a)lists.iptel.org > > > > > > > > > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >___________________________________________________________________________ > > > > > > >Appel audio GRATUIT partout dans le monde > > avec > > > > le > > > > > > nouveau Yahoo! Messenger > > > > > > >Téléchargez cette version sur > > > > > > http://fr.messenger.yahoo.com > > > > > > > > > > > > > > _______________________________________________ > > > > > > Serusers mailing list > > > > > > serusers(a)lists.iptel.org > > > > > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >___________________________________________________________________________ > > > > >Appel audio GRATUIT partout dans le monde avec > > le > > > > nouveau Yahoo! Messenger > > > > >Téléchargez cette version sur > > > > http://fr.messenger.yahoo.com > > > > > > > > _______________________________________________ > > > > Serusers mailing list > > >=== message truncated === > > > > > > > >___________________________________________________________________________ >Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger >Téléchargez cette version sur http://fr.messenger.yahoo.com

18 years, 11 months

Re: [Serusers] SERWEB

by harry gaillac

Thanks, sql log for missed call: /////////////////////////////////////////////////////// 050713 14:23:31 340 Connect ser(a)serveur1.home.net on 340 Init DB ser 340 Init DB ser 340 Query select first_name, last_name from subscriber where (username='bob' and domain='nxs.yi.org') 340 Init DB ser 340 Query select timezone from subscriber where (username='bob' and domain='nxs.yi.org') 340 Init DB ser 340 Query SELECT count(*) FROM missed_calls t1 WHERE t1.username='bob' and t1.domain='nxs.yi.org' 340 Init DB ser 340 Query SELECT count(*) FROM missed_calls t1, aliases t2 WHERE 'sip:bob@nxs.yi.org'=t2.contact AND t2.username=t1.username AND t2.domain=t1.domain 340 Init DB ser 340 Query (select t1.from_uri as inv_to_uri, t1.sip_from as inv_sip_to, t1.sip_callid as inv_callid, t1.time as inv_time, t1.fromtag as inv_fromtag, t1.sip_status as inv_status, null as bye_to_uri, null as bye_sip_to, null as bye_callid, null as bye_time, null as bye_fromtag, null as bye_totag, null as bye_from_uri, null as bye_sip_from, null as length, t1.time as ttime , 'missed' as call_type FROM missed_calls t1 WHERE t1.username='bob' and t1.domain='nxs.yi.org' ) UNION (select t1.from_uri as inv_to_uri, t1.sip_from as inv_sip_to, t1.sip_callid as inv_callid, t1.time as inv_time, t1.fromtag as inv_fromtag, t1.sip_status as inv_status, null as bye_to_uri, null as bye_sip_to, null as bye_callid, null as bye_time, null as bye_fromtag, null as bye_totag, null as bye_from_uri, null as bye_sip_from, null as length, t1.time as ttime , 'missed' as call_type FROM missed_calls t1, aliases t2 WHERE 'sip:bob@nxs.yi.org'=t2.contact AND t2.username=t1.username AND t2.domain=t1.domain ) order by ttime desc limit 0, 20 340 Quit /////////////////////////////////////////////////////// missed_calls table: mysql> select * from missed_calls; +------------------------------------------------------+--------------------------------+-------------------+------------+-----------------------------------+------------------------+----------------------+------------------------------+----------------------------------------+----------+--------+-------------------+-------+---------------------+----------------+ | sip_from | sip_to | sip_status | sip_method | i_uri | o_uri | from_uri | to_uri | sip_callid | username | domain | fromtag | totag | time | timestamp | +------------------------------------------------------+--------------------------------+-------------------+------------+-----------------------------------+------------------------+----------------------+------------------------------+----------------------------------------+----------+--------+-------------------+-------+---------------------+----------------+ | "alice" <sip:alice@nxs.yi.org>;tag=C7F9FEE3-D707AE46 | <sip:84@nxs.yi.org;user=phone> | 482 Loop Detected | INVITE | sip:84@nxs.yi.org:5060;user=phone | sip:alice@192.168.0.20 | sip:alice@nxs.yi.org | sip:84@nxs.yi.org;user=phone | a75a9eaf-a34e6609-202b22c(a)192.168.0.20 | n/a | n/a | C7F9FEE3-D707AE46 | n/a | 2005-07-13 11:24:23 | 20050713132423 | +------------------------------------------------------+--------------------------------+-------------------+------------+-----------------------------------+------------------------+----------------------+------------------------------+----------------------------------------+----------+--------+-------------------+-------+---------------------+----------------+ 1 row in set (0.00 sec) Serweb reply "No missed calls" Harry ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

18 years, 11 months

RE: [Serusers] IM problem.

by Kong

apparently that happens because of this line. if (!mf_process_maxfwd_header("16")) { sl_send_reply("483", "Too Many Hops !"); break; }; but if i comment it out, there is a infinite loop happening at the background. then it comeout timeout again. btw, do u have modparam("msilo", "registrar","sip:registrar@XXXXXX") in ur ser.cfg? At 08:18 PM 7/13/2005, you wrote: >--- Kong <kongzs(a)irepublics.com> a écrit : > > > Humm.. that seems to help, but now i got this error. > > > > 483 Too Many Hops > > > > i wonder how is that.... > > do i really need this line? > > modparam("msilo", "registrar", > > "sip:registrar@XXXXXX") > >according to doc not really > > > At 07:08 PM 7/13/2005, you wrote: > > >read > > http://openser.org/docs/modules/0.9.x/msilo.html > > > > > > The method stores certain parts of the current > > SIP > > >request (it should be called when the request type > > is > > >MESSAGE and the destination user is offline or his > > UA > > >does not support MESSAGE requests). If the user is > > >registered with a UA which does not support MESSAGE > > >requests you should not use mode="0" if you have > > >changed the request uri with the contact address of > > >user's UA. > > > > > >Meaning of the parameters is as follows: > > > mode - specifies what to save as R-URI. > > >"0" - first check if new_uri is an address of > > record. > > >If yes, then use it and store it as R-URI, > > otherwise > > >look at R-URI and, if necessary, at URI from "To" > > >header. > > >"1" - look first at R-URI and then at URI from "To" > > >header. > > >"2" - look only at URI form "To" header. > > > > > >I have to set IM I use ser/serweb 0.9.3 > > > > > >Harry > > >--- Kong <kongzs(a)irepublics.com> a écrit : > > > > > > > Tried Windows Messenger, Xlite, SJPhone, > > FireFly. > > > > > > > > modparam("msilo", "registrar", > > > > "sip:registrar@XXXXXX") > > > > > > > > am i suppose to put XXXXXX as my domain? > > > > > > > > then do i need to create any user call > > registrar? > > > > > > > > At 06:24 PM 7/13/2005, you wrote: > > > > >What is your UA ? > > > > >--- Kong <kongzs(a)irepublics.com> a écrit : > > > > > > > > > > > I am trying to implement Messaging from > > serweb > > > > to > > > > > > UA, but not a success. > > > > > > > > > > > > i have this script in my ser.cfg > > > > > > > > > > > > if (!lookup("location")) { > > > > > > if (method == "MESSAGE") { > > > > > > if (!t_newtran()) { > > > > > > sl_reply_error(); > > > > > > break; > > > > > > }; > > > > > > > > > > > > if (m_store("0")) { > > > > > > t_reply("202", "Accepted for Later > > > > > > Delivery"); > > > > > > break; > > > > > > }; > > > > > > }; > > > > > > > > > > > > sl_send_reply("404", "User Not Found > > !"); > > > > > > break; > > > > > > }; > > > > > > > > > > > > but i read somewhere in google that i need > > to > > > > add in > > > > > > this line. > > > > > > modparam("msilo", "registrar", > > > > > > "sip:registrar@iptel.org") > > > > > > so that the UA will be notify if there is > > any > > > > new > > > > > > message. > > > > > > > > > > > > If i don't add this line, the message can be > > > > send > > > > > > from serweb to the > > > > > > account (which stored in SILO) then can be > > > > checked > > > > > > from the recipient > > > > > > serweb account. But once i add the registrar > > > > line > > > > > > in, the sending process > > > > > > return error code of 405 timeout. can i know > > > > whats > > > > > > the problem here? > > > > > > > > > > > > i am using ser-0.9.3 > > > > > > > > > > > > thank you. > > > > > >_______________________________________________ > > > > > > Serusers mailing list > > > > > > serusers(a)lists.iptel.org > > > > > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >___________________________________________________________________________ > > > > >Appel audio GRATUIT partout dans le monde avec > > le > > > > nouveau Yahoo! Messenger > > > > >Téléchargez cette version sur > > > > http://fr.messenger.yahoo.com > > > > > > > > _______________________________________________ > > > > Serusers mailing list > > > > serusers(a)lists.iptel.org > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > > > > > > > > > > > > > >___________________________________________________________________________ > > >Appel audio GRATUIT partout dans le monde avec le > > nouveau Yahoo! Messenger > > >Téléchargez cette version sur > > http://fr.messenger.yahoo.com > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > >___________________________________________________________________________ >Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger >Téléchargez cette version sur http://fr.messenger.yahoo.com

18 years, 11 months

[Users] Make calls without registering?

by Dave

Hello, Is it possible to allow an UA to make calls without it registering itself? IN other words, I disable registration on the phone and enter the correct proxy info. Now when UA makes call, the INVITE goes to SER. Can SER extract the contact info from the INVITE and then upon detecting that the "user is not registered" simply register the contact info? Thanks Dave __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

18 years, 11 months

RE: [Serusers] IM problem.

by Kong

Humm.. that seems to help, but now i got this error. 483 Too Many Hops i wonder how is that.... do i really need this line? modparam("msilo", "registrar", "sip:registrar@XXXXXX") At 07:08 PM 7/13/2005, you wrote: >read http://openser.org/docs/modules/0.9.x/msilo.html > > The method stores certain parts of the current SIP >request (it should be called when the request type is >MESSAGE and the destination user is offline or his UA >does not support MESSAGE requests). If the user is >registered with a UA which does not support MESSAGE >requests you should not use mode="0" if you have >changed the request uri with the contact address of >user's UA. > >Meaning of the parameters is as follows: > mode - specifies what to save as R-URI. >"0" - first check if new_uri is an address of record. >If yes, then use it and store it as R-URI, otherwise >look at R-URI and, if necessary, at URI from "To" >header. >"1" - look first at R-URI and then at URI from "To" >header. >"2" - look only at URI form "To" header. > >I have to set IM I use ser/serweb 0.9.3 > >Harry >--- Kong <kongzs(a)irepublics.com> a écrit : > > > Tried Windows Messenger, Xlite, SJPhone, FireFly. > > > > modparam("msilo", "registrar", > > "sip:registrar@XXXXXX") > > > > am i suppose to put XXXXXX as my domain? > > > > then do i need to create any user call registrar? > > > > At 06:24 PM 7/13/2005, you wrote: > > >What is your UA ? > > >--- Kong <kongzs(a)irepublics.com> a écrit : > > > > > > > I am trying to implement Messaging from serweb > > to > > > > UA, but not a success. > > > > > > > > i have this script in my ser.cfg > > > > > > > > if (!lookup("location")) { > > > > if (method == "MESSAGE") { > > > > if (!t_newtran()) { > > > > sl_reply_error(); > > > > break; > > > > }; > > > > > > > > if (m_store("0")) { > > > > t_reply("202", "Accepted for Later > > > > Delivery"); > > > > break; > > > > }; > > > > }; > > > > > > > > sl_send_reply("404", "User Not Found !"); > > > > break; > > > > }; > > > > > > > > but i read somewhere in google that i need to > > add in > > > > this line. > > > > modparam("msilo", "registrar", > > > > "sip:registrar@iptel.org") > > > > so that the UA will be notify if there is any > > new > > > > message. > > > > > > > > If i don't add this line, the message can be > > send > > > > from serweb to the > > > > account (which stored in SILO) then can be > > checked > > > > from the recipient > > > > serweb account. But once i add the registrar > > line > > > > in, the sending process > > > > return error code of 405 timeout. can i know > > whats > > > > the problem here? > > > > > > > > i am using ser-0.9.3 > > > > > > > > thank you. > > > >_______________________________________________ > > > > Serusers mailing list > > > > serusers(a)lists.iptel.org > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > > > > > > > > > > > > > >___________________________________________________________________________ > > >Appel audio GRATUIT partout dans le monde avec le > > nouveau Yahoo! Messenger > > >Téléchargez cette version sur > > http://fr.messenger.yahoo.com > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > >___________________________________________________________________________ >Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger >Téléchargez cette version sur http://fr.messenger.yahoo.com

18 years, 11 months

[Serusers] New Bee using SER

by maganti vamshi

Hi all Iam very new to this field. I would like to know how can i configure this SER. I want to use this in our Lab environment. Thank You. Regards, Dinesh. __________________________________________________________ Free antispam, antivirus and 1GB to save all your messages Only in Yahoo! Mail: http://in.mail.yahoo.com

18 years, 11 months

[Serusers] problem connecting.

by Muhammad Nuzaihan Kamalluddin

Hi, I have ser 0.9.3 installed on freebsd 4.10, everything else seems to work fine, except that it says host is down in the logs. It happens only after i run the softphone to test. I have port forwarded (the client's behind a NAT) but to no avail. Jul 13 14:46:05 flamejob ser[38889]: msg_send: ERROR: udp_send failed Jul 13 14:47:24 flamejob ser[38889]: ERROR: udp_send: sendto(sock,0x28411478,551,0,0x28408870,16): Host is down(64) and here's my ser.cfg debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" fifo="/tmp/ser_fifo" fifo_db_url="mysql://root:password@localhost/ser" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy Thanks, Zaihan

18 years, 11 months

← Newer
1
...
29
30
31
32
33
34
35
...
55
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users July 2005