Hello,
We're an ip-telephony operator in Sweden (www.wx3.se) , and we're looking
for a platform which can help us undertake pre-paid billing of IP-telephony
users.
We have ourselves a processing platform for CDRs, but we don't have a
registrar/proxy (rtp-handling) / voice messaging (potentially asterisk)
which can make us support pre-paid services.
What we need is a platform which can make a request (including call details)
to a billing system, and continue the call set-up if the response is
positive. As the call is ongoing, the system will periodically continue to
ask the billing system if the call can continue (for another 60 secs, for
example). If the call cannot continue any longer, the call will be "taken
down".
If a caller call, and there is not enough money on the account, the billing
system will return with a negative response and a sip-url, the caller should
be directed to the sip-url - which belongs to a voice-mail system, in which
the appropriate response will be played.
So my question is: Can SER - possibly with support of RTP Router : to have
control of RTP-flow / call-redirection - support these requirements.
Br,
Terje Myhre
<http://www.wx3.se/> www.wx3.se
sip: <mailto:tem@wx3.se> tem(a)wx3.se
tel +46 8 5250 7972
Hello
I've ever sent this question.
What must i do in order to run ser.
i tried ser_mysql.sh reinstall without success !
Regards
harry
serveur1:~# tail /var/log/syslog
Jun 3 10:14:15 serveur1 ntpd[1912]: synchronized to
213.161.8.44, stratum 2
Jun 3 10:14:21 serveur1 /usr/sbin/ser[2565]: Maxfwd
module- initializing
Jun 3 10:14:21 serveur1 /usr/sbin/ser[2565]:
permissions - initializing
Jun 3 10:14:21 serveur1 /usr/sbin/ser[2565]: WARNING:
File not found: /etc/ser/ permissions.allow
Jun 3 10:14:21 serveur1 /usr/sbin/ser[2565]: Default
allow file (/etc/ser/permi ssions.allow) not found =>
empty rule set
Jun 3 10:14:21 serveur1 /usr/sbin/ser[2565]: WARNING:
File not
found: /etc/ser/ permissions.deny
Jun 3 10:14:21 serveur1 /usr/sbin/ser[2565]: Default
deny file (/etc/ser/permis sions.deny) not found =>
empty rule set
Jun 3 10:14:21 serveur1 /usr/sbin/ser[2565]:
table_version(): Invalid number of rows received: 2,
grp
Jun 3 10:14:21 serveur1 /usr/sbin/ser[2565]:
group:mod_init(): Error while quer ying table version
Jun 3 10:14:21 serveur1 /usr/sbin/ser[2565]:
init_mod(): Error while initializi ng module group
_____________________________________________________________________________
Découvrez le nouveau Yahoo! Mail : 1 Go d'espace de stockage pour vos mails, photos et vidéos !
Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com
Hello,
May be I'm tedious with my problems however i would
like to get help from users .
what's : "Invalid number of rows received"
i installed:
ser-mysql-module_0.10.99+cvs20050519_i386.deb
ser_0.10.99+cvs20050519_i386.deb
Jun 3 12:09:05 serveur1 /usr/sbin/ser[4952]: Maxfwd
module- initializing
Jun 3 12:09:05 serveur1 /usr/sbin/ser[4952]:
permissions - initializing
Jun 3 12:09:05 serveur1 /usr/sbin/ser[4952]: WARNING:
File not found: /etc/ser/permissions.allow
Jun 3 12:09:05 serveur1 /usr/sbin/ser[4952]: Default
allow file (/etc/ser/permissions.allow) not found =>
empty rule set
Jun 3 12:09:05 serveur1 /usr/sbin/ser[4952]: WARNING:
File not found: /etc/ser/permissions.deny
Jun 3 12:09:05 serveur1 /usr/sbin/ser[4952]: Default
deny file (/etc/ser/permissions.deny) not found =>
empty rule set
Jun 3 12:09:05 serveur1 /usr/sbin/ser[4952]:
table_version(): Invalid number of rows received: 2,
trusted
Jun 3 12:09:05 serveur1 /usr/sbin/ser[4952]:
permissions:init_trusted(): Error while querying table
version
Jun 3 12:09:05 serveur1 /usr/sbin/ser[4952]: Error
while initializing allow_trusted function
Jun 3 12:09:05 serveur1 /usr/sbin/ser[4952]:
table_version(): Invalid number of rows received: 2,
grp
Jun 3 12:09:05 serveur1 /usr/sbin/ser[4952]:
group:mod_init(): Error while querying table version
Jun 3 12:09:05 serveur1 /usr/sbin/ser[4952]:
init_mod(): Error while initializing module group
_____________________________________________________________________________
Découvrez le nouveau Yahoo! Mail : 1 Go d'espace de stockage pour vos mails, photos et vidéos !
Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com
t_write_req appeared in SER version 0.9, in 0.8.12 it had another sintax, which I don't remember now...take a look at older posts or the tm module interface to find it out..
Samuel.
Unclassified.
>>> Llanos Serna García-Conde <llanosserna(a)hotmail.com> 06/03/05 12:44PM >>>
Hi all, in the SER-SEMS-HOWTO, the next paragraph appears:
Redirecting the messages is a very simple operation. You just have to call the t_write_unix() (or t_write_req()) function from the 'tm' module, which you have to load.
In ser.cfg routing:
t_write_req("/tmp/am_fifo", "voicemail")
But in my tm module (SER 0.8.14), t_write_req doesn't appear, and so if I add that line I get an error of configuration.
What's wrong with this? Please help,
Llanos
Simply because it allows you then to use SER to terminate to them, and
they then handoff the traffic, also you only need to open an account at
one place, and billing is easier....Having said that I dont use them, I
merely tested with them. Having said that it all depends on your setup,
and exactly what it is you are trying to do, if you are happy with one
endpoint, do it that way, tie up tightly with them, you see each gateway
will have its own quirks, or have your own gateways, it depends on how
flexibile you wish to be.
Iqbal
Ritesh Jalan wrote:
>Hi Iqbal Sir
>
>Can you tell us how reliable are IPCB? as you have recomended them, further
>they dont terminate calls, you need to buy mins from someone else. They only
>have the hosted switch. then why we should use SER with IPCB??
>
>
>Thanks & Regards
>Ritesh Jalan
>
>
>----- Original Message -----
>From: "Iqbal" <iqbal(a)gigo.co.uk>
>To: <serusers(a)lists.iptel.org>
>Sent: Thursday, June 02, 2005 10:39 PM
>Subject: [Serusers] interconnect with ipcb
>
>
>
>
>>Hi
>>
>>A few people here were looking to terminate traffic using SER and
>>looking for pstn end gateways, well if you sign up with ipcb.net (and no
>>I am not connected to them..but hoping if they read this, i will get a
>>pizza out of this :-)) you can connect SER to any of the gateways you
>>wish worldwide.
>>
>>How they do it is simple, they have written a module which you compile
>>into ser, load as normal, it has a user/pass in it, and u assign there
>>IP address as trusted in ur config. Then when any requests are sent, the
>>auth you using that user/pass, and let traffic flow. Works fine.
>>
>>Now I was wondering if some of the programmers on this list could take a
>>look at the module (they will email it to you) surely it would be easy
>>to do the same for any gateway out there....I guess
>>
>>Anyhow now all SER people can get their own gateways.
>>
>>Iqbal
>>
>>_______________________________________________
>>Serusers mailing list
>>serusers(a)lists.iptel.org
>>http://lists.iptel.org/mailman/listinfo/serusers
>>
>>
>
>
>.
>
>
>
If you use the exact config file from onsip.org, you should have no
problems. I have seen your other posts where people indicate that you have a
problem with the DB, which is what these errors tell you:
Jun 3 11:39:51 serveur1 /usr/sbin/ser[4299]:
bind_dbmod: Module sql does not export db_use_table
function
Jun 3 11:39:51 serveur1 /usr/sbin/ser[4299]: ERROR:
group_db_bind: unable to bind to the database module
Jun 3 11:39:51 serveur1 /usr/sbin/ser[4299]:
init_mod(): Error while initializing module group
You may have discrepencies between ser version and modules. Make sure you
delete the full binary tree and do make proper before compiling new
versions. This way you will know that the modules match the ser version.
g-)
harry gaillac wrote:
> Hello
>
> I use onsip.org to write ser.cfg in order to use
> asterisk as PSTN gateway.
>
> However i don't find docs for params permissions
> module:
> modparam("permissions", "db_mode", 1) => send errors
> modparam("permissions", "trusted_table", "trusted")
>
> I try to load group module for ACL but ser don't start
>
> Need help
>
> Harry
>
> serveur1:/etc/ser# tail /var/log/syslog
> Jun 3 11:39:51 serveur1 /usr/sbin/ser[4299]: Maxfwd
> module- initializing
> Jun 3 11:39:51 serveur1 /usr/sbin/ser[4299]:
> permissions - initializing
> Jun 3 11:39:51 serveur1 /usr/sbin/ser[4299]: WARNING:
> File not found: /etc/ser/permissions.allow
> Jun 3 11:39:51 serveur1 /usr/sbin/ser[4299]: Default
> allow file (/etc/ser/permissions.allow) not found =>
> empty rule set
> Jun 3 11:39:51 serveur1 /usr/sbin/ser[4299]: WARNING:
> File not found: /etc/ser/permissions.deny
> Jun 3 11:39:51 serveur1 /usr/sbin/ser[4299]: Default
> deny file (/etc/ser/permissions.deny) not found =>
> empty rule set
> Jun 3 11:39:51 serveur1 /usr/sbin/ser[4299]:
> bind_dbmod: Module sql does not export db_use_table
> function
> Jun 3 11:39:51 serveur1 /usr/sbin/ser[4299]: ERROR:
> group_db_bind: unable to bind to the database module
> Jun 3 11:39:51 serveur1 /usr/sbin/ser[4299]:
> init_mod(): Error while initializing module group
>
>
>
>
>
>
>
> _____________________________________________________________________________
> Découvrez le nouveau Yahoo! Mail : 1 Go d'espace de stockage pour vos
> mails, photos et vidéos ! Créez votre Yahoo! Mail sur
> http://fr.mail.yahoo.com
