sr-users May 2005

sr-users@lists.kamailio.org

230 participants
522 discussions

by Tarun Abhichandani

Hi Marc: We have H.350 authentication structure on our openLDAP server. We use it to authenticate users from our home-grown SIP software. Let me know if you need any specific information. Will try my best to provide you, Tarun ________________________________ From: serusers-bounces(a)lists.iptel.org on behalf of Marc Sutter Sent: Thu 5/26/2005 8:45 AM To: serusers(a)lists.iptel.org Subject: [Serusers] H.350 directory services Hi all, I'm looking for a solution to use H.350 directory services to authentificate UA's through ser. Is ther any ldap module for authentification out there ? Thanks for your help Marc _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

18 years, 11 months

[Serusers] serctl moni question.

by Ricardo Martinez

Hello. In the serctl moni appears a "failure" indicator. What represent this indicator? Could be something related to exec_dst() function? Thanks! Ricardo Martinez-.

18 years, 11 months

Re: [Serusers] Ser+Nat +Polycom phones

by Greger V. Teigre

http://lists.iptel.org/pipermail/serusers/2005-January/014688.html harry gaillac wrote: > Where can I get your patch ? > > Harry > --- "Greger V. Teigre" <greger(a)teigre.com> a écrit : > >> Running rtpproxy on a NATed box is a problem (you >> need a patch I posted a >> while back to announce the correct public IP). >> Running all daemons on the >> same server with a public IP is NOT a problem. >> g-) >> harry gaillac wrote: >>> Hello, >>> >>> SER+nathelper+rtpproxy run on the same box that >> nat. >>> Is it a problem ? >>> >>> Harry >>> >>> >>> --- "Greger V. Teigre" <greger(a)teigre.com> a écrit >>> >>> >>>> That's strange. We are using some Polycom 300 and >>>> they work ok. No STUN >>>> support and sometimes a very erratic registration >>>> pattern, but except from >>>> that, they seem to perform ok. They interoperate >>>> with sipuras, >>>> grandstreams, sjphone, cisco gw, xlite, etc. >>>> g-) >>>> >>>> Juha Heinanen wrote: >>>>> harry, >>>>> >>>>> we tried polycom video phones a month or so ago >>>> and their sip >>>>> implementation was worst i had seen so far. the >>>> phones didn't support >>>>> digest authentication and we were also hit the >>>> problem you mentioned >>>>> with domain in request-uri. i suggest to junk >>>> those phones before >>>>> their sip implementation is closer to rfc3261. >>>>> >>>>> -- juha >>>>> >>>>> _______________________________________________ >>>>> Serusers mailing list >>>>> serusers(a)lists.iptel.org >>>>> http://lists.iptel.org/mailman/listinfo/serusers >>>> >>>> >>> >>> >>> >>> >>> >>> >>> >>> >> > _____________________________________________________________________________ >>> Découvrez le nouveau Yahoo! Mail : 1 Go d'espace >> de stockage pour vos >>> mails, photos et vidéos ! Créez votre Yahoo! Mail >> sur >>> http://fr.mail.yahoo.com >> >> > > > > > > > > _____________________________________________________________________________ > Découvrez le nouveau Yahoo! Mail : 1 Go d'espace de stockage pour vos > mails, photos et vidéos ! Créez votre Yahoo! Mail sur > http://fr.mail.yahoo.com

18 years, 11 months

[Serusers] Ser+Nat +Polycom phones

by harry gaillac

Hello, I try to configure Ser and polycom phones behind nat. phone 1 ------- | ser | ----- internet phone 2 ------- Ser listen on private network and internet. Polycom phones send public ip of Ser in SIP header. According to sip_call file (ethereal) ser know that phones are behind nat (lines 2,3,6,8) however when phone1 invite phone2 "404 Not found" message it sent by Ser . If Ser Know that phones are behind nat How can I fix that problem in ser.cfg . Thanks for your help. Harry _____________________________________________________________________________ Découvrez le nouveau Yahoo! Mail : 1 Go d'espace de stockage pour vos mails, photos et vidéos ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com

18 years, 11 months

[Serusers] e164 exchanges, lookups and what happens when they are down

by Iqbal

Hi Had a strange problem this morning, freenum seemed to be down, hence the lookups in ser just sort of hung, and the looped round again, but no calls were being made, it seems as if no response, is received then it "hangs" no in a literal sense. Anyonw experienced this, or knows of a way around, it works fine if it recieves a lookup failure , i.e if the data is not in there. Iqbal

18 years, 11 months

[Serusers] Re: error in compile ser-0.9.0

by Kamran Ahmad

hello i already have fifo="/tmp/ser_fifo" in my ser.cfg there is some problem in compile ------------------------------------------------------ make[1]: Entering directory `/ser-0.9.0/modules/lcr' ../../Makefile.rules:77: fifo.d: No such file or directory ../../Makefile.rules:77: lcr_mod.d: No such file or directory make[1]: Leaving directory `/ser-0.9.0/modules/lcr' make[1]: Entering directory `/ser-0.9.0/modules/lcr' gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -Wall -minline-all-stringops -malign-double -falign-loops -mtune=athlon -I/opt/axxany/siprouter/radiusclient/include -DNAME='"ser"' -DVERSION='"0.9.1"' -DARCH='"i386"' -DOS='"linux"' -DCOMPILER='"gcc 3.4"' -D__CPU_i386 -D__OS_linux -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DDBG_QM_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -c fifo.c -o fifo.o gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -Wall -minline-all-stringops -malign-double -falign-loops -mtune=athlon -I/opt/axxany/siprouter/radiusclient/include -DNAME='"ser"' -DVERSION='"0.9.1"' -DARCH='"i386"' -DOS='"linux"' -DCOMPILER='"gcc 3.4"' -D__CPU_i386 -D__OS_linux -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DDBG_QM_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -c lcr_mod.c -o lcr_mod.o gcc -shared -L/opt/axxany/siprouter/radiusclient/lib -Wl,-O2 -Wl,-E fifo.o lcr_mod.o -o lcr.so ----------------------------------------------------- >Do you have the following line in your ser.cfg: > >fifo=/tmp/ser_fifo > > >Try to configure it, and see what happens > > >On Tue, 24 May 2005 06:43:04 -0700 (PDT) >Kamran Ahmad <p_kami(a)yahoo.com> wrote: > >> fifo=/tmp/ser_fifo > >-- >Felipe Martins >Mundivox Communications >Tecnologia e Projetos >fmartins(a)mundivox.com > >Tel.: +55 +21 +3820 8839 >Cel.: +55 +21 +9823 8602 >Fax.: +55 +21 +3820 8844 >www.mundivox.com __________________________________ Do you Yahoo!? Yahoo! Small Business - Try our new Resources site http://smallbusiness.yahoo.com/resources/

18 years, 11 months

[Serusers] SER on multihomed host

by Ravi

Hi, I am running SER on a host with 2 network interfaces. The behavior I observe is that when SER receives a message say REGISTER on interface 1 it sends the 200OK on interface 2. Due to the way the network has been configured, this 200OK never makes it back to the UA which sent the REGISTER. So I want to make sure that SER sends the response back on the same interface it got the message on. How do I do this? I cannot disable the second network interface. In ser.cfg I set "listen" to the IP address of the interface I want to use; I also set "mhomed" to 1, still no luck. Any suggestions are highly welcome. thanks, -Ravi.

18 years, 11 months

[Serusers] How to generate Bills - Trabas VoIP Billing software

by Felipe Martins

Hi everybody, I'm thinking of implementing Trabas VoIP Billing Software (www.trabas.com) in order to manage my VoIP billing. I've been to many voip billing software, nearly all I found very good but also very expensive ... Because of that, I would like to make some questions. 1. Has anybody have implemented such software ? 2. How to generate bills (CDR Data) in SER ? Is there a howto or tutorial for that at the internet ? 3. I use SER with MySQL, does Trabas work with SER and MySQL ? Thanks in Advance Best Regards -- Felipe Martins Mundivox Communications Tecnologia e Projetos fmartins(a)mundivox.com Tel.: +55 +21 +3820 8839 Cel.: +55 +21 +9823 8602 Fax.: +55 +21 +3820 8844 www.mundivox.com

18 years, 11 months

[Serusers] Questions about domain field in Proxy-Authenticate

by Paul Belanger

>From RFC3261: 20.27 Proxy-Authenticate A Proxy-Authenticate header field value contains an authentication challenge. The use of this header field is defined in [H14.33]. See Section 22.3 for further details on its usage. Example: Proxy-Authenticate: Digest realm="atlanta.com", domain="sip:ss1.carrier.com", qop="auth", nonce="f84f1cec41e6cbe5aea9c8e88d359", opaque="", stale=FALSE, algorithm=MD5 My question revolves around the domain="sip:ss1.carrier.com" field. I notice that SER does not use the option, however I have another proxy that does. I have searched for information about this field, but not able to get the information I need. Why would you use a realm and domain field at the same time? Is 1 preferred to another? Should both be used? Any help would be great. PB

18 years, 11 months

[Serusers] flatstore problems??

by William Towfiq

I couldn't get much debugging info from all of this because it happened somewhat randomly. I just want to see if anyone else has ever encountered similar problems with flatstore. Thanks, William 0(12417) entering route[1] 0(12417) ERROR: build_req_buf_from_sip_req: out of memory 0(12417) ERROR: print_uac_request: no pkg_mem 0(12417) ERROR: t_forward_nonack: failure to add branches 0(12417) BUG: flat_db_insert: Uninitialized connection 0(12417) ERROR: acc_request: Error while inserting to database 0(12417) -------------------------------------------

18 years, 11 months

← Newer
1
2
3
4
5
6
7
8
...
53
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users May 2005