sr-users April 2005

sr-users@lists.kamailio.org

250 participants
697 discussions

Re: [Serusers] cpl_init: mandatory parameter

by Aisling O'Driscoll

That worked Bogdon,Thank you, I also added: modparam ("cpl-c", "cpl_table", "cpl") Now it requires the cpl_dtd_file - However I am not sure what path here: i.e. modparam("cpl-c", "cpl_dtd_file", "whatpath?") Is there a usual directory where this can be found? Regards, Aisling >---- Original Message ---- >From: bogdan(a)voice-system.ro >To: vivcurran(a)yahoo.co.uk >Subject: Re: [Serusers] cpl_init: mandatory parameter "DB_URL" found >empty >Date: Tue, 12 Apr 2005 18:05:02 +0200 > >>sorry, in cpl-c the parameter is called "cpl_db" - I will change the > >>error message to state the proper parameter name. (db_url -> cpl_db) >> >>bogdan >> >> >>Vivienne Curran wrote: >> >>> Bogdan, >>> >>> I set >>> modparam("cpl-c","db_url","mysql://root:password@localhost/ser"), >>> however when i tried to restart SER I got: >>> >>> set_mod_param_regex: parameter <db_url> not found in module ><cpl-c> >>> parse error (87,20-21): Can't set module parameter >>> >>> I tried db_url in upper case also. An I incoorect in thinking that >the >>> module should load without this anyway? >>> >>> Regards, >>> Aisling. >>> >>> */Bogdan-Andrei Iancu <bogdan(a)voice-system.ro>/* wrote: >>> >>> you have to set the db_url parameter pointing to a DB >connection - >>> default is NULL. For example: >>> modparam("cpl-c","db_url","mysql://ser:heslo@localhost/ser") >>> >>> bogdan >>> >>> Aisling O'Driscoll wrote: >>> >>> >Hello, >>> > >>> >I am using ser 0.9.0. When I try to load the cpl module e.g. >>> >loadmodule "/opt/ser/lib/ser/modules/cpl-c.so", and restart >ser, I >>> >get the following error: >>> > >>> >ERROR:cpl_init: mandatory parameter "DB_URL" found empty >>> >init_mod(): Error while initializing module cpl-c >>> > >>> >When I check in /opt/ser/lib/ser/modules, the cpl-c module si >there. >>> >Does anyone have any clue how this can be resolved? >>> > >>> >Thank you, >>> >Aisling. >>> > >>> > >>> >-------------------Legal >>> Disclaimer--------------------------------------- >>> > >>> >The above electronic mail transmission is confidential and >>> intended only for the person to whom it is addressed. Its >contents >>> may be protected by legal and/or professional privilege. >Should it >>> be received by you in error please contact the sender at the >above >>> quoted email address. Any unauthorised form of reproduction of >>> this message is strictly prohibited. The Institute does not >>> guarantee the security of any information electronically >>> transmitted and is not liable if the information contained in >this >>> communication is not a proper and complete record of the >message >>> as transmitted by the sender nor for any delay in its receipt. >>> > >>> >_______________________________________________ >>> >Serusers mailing list >>> >Serusers(a)iptel.org >>> >http://mail.iptel.org/mailman/listinfo/serusers >>> > >>> > >>> > >>> >>> _______________________________________________ >>> Serusers mailing list >>> Serusers(a)iptel.org >>> http://mail.iptel.org/mailman/listinfo/serusers >>> >>> Send instant messages to your online friends >>> http://uk.messenger.yahoo.com >>> >> >> -------------------Legal Disclaimer--------------------------------------- The above electronic mail transmission is confidential and intended only for the person to whom it is addressed. Its contents may be protected by legal and/or professional privilege. Should it be received by you in error please contact the sender at the above quoted email address. Any unauthorised form of reproduction of this message is strictly prohibited. The Institute does not guarantee the security of any information electronically transmitted and is not liable if the information contained in this communication is not a proper and complete record of the message as transmitted by the sender nor for any delay in its receipt.

19 years, 5 months

[Serusers] Paid Implementation Support Requested

by VoIP Project

Hello, I am working with a Denver based Voice Mail company who is preparing to enter the VoIP business with a IP trunking type service, delivering dial tone and features to small businesses with broadband and 4-8 line analog key systems. This company is leaning towards an open source solution, most likely using a combination of SER and Asterisk. I am seeking a person or group who could perform the initial implementation/configuration of such a platform. Budget has been allocated for this project. Please reply directly to mlvoipproject(a)hotmail.com with your contact information and details of your experience with similar implementations, or if you have any questions about the scope of work. Work on this project is slated to begin immediately. Thank you. -DP _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today - it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

19 years, 5 months

Re: [Serusers] cpl_init: mandatory parameter "DB_URL" found empty

by Vivienne Curran

Bogdan, I set modparam("cpl-c","db_url","mysql://root:password@localhost/ser"), however when i tried to restart SER I got: set_mod_param_regex: parameter <db_url> not found in module <cpl-c> parse error (87,20-21): Can't set module parameter I tried db_url in upper case also. An I incoorect in thinking that the module should load without this anyway? Regards, Aisling. Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> wrote: you have to set the db_url parameter pointing to a DB connection - default is NULL. For example: modparam("cpl-c","db_url","mysql://ser:heslo@localhost/ser") bogdan Aisling O'Driscoll wrote: >Hello, > >I am using ser 0.9.0. When I try to load the cpl module e.g. >loadmodule "/opt/ser/lib/ser/modules/cpl-c.so", and restart ser, I >get the following error: > >ERROR:cpl_init: mandatory parameter "DB_URL" found empty >init_mod(): Error while initializing module cpl-c > >When I check in /opt/ser/lib/ser/modules, the cpl-c module si there. >Does anyone have any clue how this can be resolved? > >Thank you, >Aisling. > > >-------------------Legal Disclaimer--------------------------------------- > >The above electronic mail transmission is confidential and intended only for the person to whom it is addressed. Its contents may be protected by legal and/or professional privilege. Should it be received by you in error please contact the sender at the above quoted email address. Any unauthorised form of reproduction of this message is strictly prohibited. The Institute does not guarantee the security of any information electronically transmitted and is not liable if the information contained in this communication is not a proper and complete record of the message as transmitted by the sender nor for any delay in its receipt. > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers > > > _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers Send instant messages to your online friends http://uk.messenger.yahoo.com

19 years, 5 months

[Serusers] cpl_init: mandatory parameter "DB_URL" found empty

by Aisling O'Driscoll

Hello, I am using ser 0.9.0. When I try to load the cpl module e.g. loadmodule "/opt/ser/lib/ser/modules/cpl-c.so", and restart ser, I get the following error: ERROR:cpl_init: mandatory parameter "DB_URL" found empty init_mod(): Error while initializing module cpl-c When I check in /opt/ser/lib/ser/modules, the cpl-c module si there. Does anyone have any clue how this can be resolved? Thank you, Aisling. -------------------Legal Disclaimer--------------------------------------- The above electronic mail transmission is confidential and intended only for the person to whom it is addressed. Its contents may be protected by legal and/or professional privilege. Should it be received by you in error please contact the sender at the above quoted email address. Any unauthorised form of reproduction of this message is strictly prohibited. The Institute does not guarantee the security of any information electronically transmitted and is not liable if the information contained in this communication is not a proper and complete record of the message as transmitted by the sender nor for any delay in its receipt.

19 years, 5 months

[Serusers] STUN/UA/SER/Network

by info＠beeplove.com

Hello, I am running ser on public ip without [RTP\Media]Proxy. I have two UA from two different NAT cloud and they are only SIP client in their network. I think, they are from Asymetric NAT. I am using STUN to get their public IP. Problem is: When these two UA register to SER for the first time, in location table I see there public IP. But after couple of mintues ( I think, when its renew their information), in location table, public IP is replaced by their private IP. I am not sure what is causing this. I have tried both stund and mystun. Thanks, Mohammad -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ .

19 years, 5 months

Re: [Serusers] msilo module + serweb

by harry gaillac

Thanks Daniel, I think of ser+serweb devoloppers should be synchronized in order to waste time Regards Harry --- Daniel-Constantin Mierla <daniel(a)voice-system.ro> wrote: > The msilo has changed from 0.8.14. In order to have > multidomain support > compatible with other ser modules (subscriber, acc, > ...) the columns has > been split into username and domain. The r_uri > column is still kept for > backward compatibilities (scheduled to be removed), > but it is not filled > by newer ser anymore. > > Daniel > > > harry gaillac wrote: > > >Hi all, > > > >I use ser 0.10.99-dev5 (i386/linux) with the latest > >Ser web from cvs. > >according to mysql log r_uri is not set in table > silo > >?! > >Ser don't return error and message is stored in > table > >silo. > >I need help to fix that problem > > > >Harry > > > >050322 11:48:07 114 Connect ser@localhost > on > > 114 Init DB ser > > 114 Query select val from > >active_sessions where sid = > >'fd33d3dd6e4783743b30428e0942f0b4' and name = > >'phplib_Session' > > 114 Query select val from > >active_sessions where sid = > >'fd33d3dd6e4783743b30428e0942f0b4' and name = > >'phplib_Session' > > 88 Query insert into > silo > >(dst_addr,src_addr,username,domain,body,exp_time,inc_time > >) values > ('sip:alice@home.net','sip:alice@home.net','alice','home.net','helo\r\n',1111747687,1111488487) > > > > > > > > > > > > > >Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace > de stockage pour vos mails ! > >Créez votre Yahoo! Mail sur > http://fr.mail.yahoo.com/ > > > >------------------------------------------------------------------------ > > > >_______________________________________________ > >Serusers mailing list > >serusers(a)lists.iptel.org > >http://lists.iptel.org/mailman/listinfo/serusers > > > > > __________________________________________________________________ Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/

19 years, 5 months

[Serusers] SIP + RTPPROXY + NEED HELP

by Iantcho Vassilev

Hello, guys! Here is my situation: I have 2 ADSL at home: I have set up a linux(debian) SER +RTPPROXY on of the ADSL and i use the other Adsl for internet here: me ----> 192.168.0.xx(SER with two ethernet int) | 192.168.0.x(default gateway) | internet I`m using Xphone-Lite. I would like to contact another person registered on the outside interface of Ser(i`m registering from the interior). Internet IP <---> outside interface(SER)(lan)<---->me But that`s not working What`s should be the mistake(from sipsak i got: from the internet user: sipsak -s sip:adress_registered_from_lan@myADLShere returns my other ADSL line. and from sipsak -s sip:internet_number_user@myADSLhere i got sip:internet_number_user@HIS_IP_ADDRESS rttproxy is isntalled(build from cvs this morning) SER.cfg is :------------------->>>>>>>>><<<<<<<<<<<-------------------- # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) #/* Uncomment these lines to enter debugging mode #debug=7 #Fork=no #log_stderror=yes #*/ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 #Listen=83.228.8.112 children=2 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/textops.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/nathelper.so" #loadmodule "/usr/lib/ser/modules/domain.so" #loadmodule "/usr/lib/ser/modules/mediaproxy.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/lib/ser/modules/auth.so" #loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) modparam("registrar", "nat_flag", 6) modparam("nathelper", "natping_interval", 60) modparam("nathelper", "ping_nated_only", 1) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); break; }; # !! Nathelper # Special handling for NATed clients; first, NAT test is # executed: it looks for via!=received and RFC1918 addresses # in Contact (may fail if line-folding is used); also, # the received test should, if completed, should check all # vias for rpesence of received if (nat_uac_test("3")) { # Allow RR-ed requests, as these may indicate that # a NAT-enabled proxy takes care of it; unless it is # a REGISTER if (method == "REGISTER" || ! search("^Record-Route:")) { log("LOG: Someone trying to register from private IP, rewriting\n"); # This will work only for user agents that support symmetric # communication. We tested quite many of them and majority is # smart enough to be symmetric. In some phones it takes a configuration # option. With Cisco 7960, it is called NAT_Enable=Yes, with kphone it is # called "symmetric media" and "symmetric signalling". fix_nated_contact(); # Rewrite contact with source IP of signalling if (method == "INVITE") { fix_nated_sdp("1"); # Add direction=active to SDP }; force_rport(); # Add rport parameter to topmost Via setflag(6); # Mark as NATed }; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # }; save("location"); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # if client or server know to be behind a NAT, enable relay if (isflagset(6)) { force_rtp_proxy(); }; # NAT processing of replies; apply to all transactions (for example, # re-INVITEs from public to private UA are hard to identify as # NATed at the moment of request processing); look at replies t_on_reply("1"); # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; } # !! Nathelper onreply_route[1] { # NATed transaction ? if (isflagset(6)) { #&& status =~ "(10)[0-9]") { fix_nated_contact(); force_rtp_proxy(); # otherwise, is it a transaction behind a NAT and we did not # know at time of request processing ? (RFC1918 contacts) } else if (nat_uac_test("1")) { fix_nated_contact(); }; } ----------------------------------------------------------------- http://host.GBG.bg - лидер в Уеб Хостинг решения и регистрация на Домейн имена

19 years, 5 months

[Serusers] msilo module + serweb

by harry gaillac

Hi all, I use ser 0.10.99-dev5 (i386/linux) with the latest Ser web from cvs. according to mysql log r_uri is not set in table silo ?! Ser don't return error and message is stored in table silo. I need help to fix that problem Harry 050322 11:48:07 114 Connect ser@localhost on 114 Init DB ser 114 Query select val from active_sessions where sid = 'fd33d3dd6e4783743b30428e0942f0b4' and name = 'phplib_Session' 114 Query select val from active_sessions where sid = 'fd33d3dd6e4783743b30428e0942f0b4' and name = 'phplib_Session' 88 Query insert into silo (dst_addr,src_addr,username,domain,body,exp_time,inc_time ) values ('sip:alice@home.net','sip:alice@home.net','alice','home.net','helo\r\n',1111747687,1111488487) Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/

19 years, 5 months

[Serusers] NAT

by harry gaillac

Hello, I read the howto frop onsip.org in order to set NAT with rtpproxy. I setup ser-0.9.0 rtpproxy from CVS it's ok . 192.168.0.0/24---FW+NAT---SER+rtpproxy------public network Here are my netfilter rules below : My two Polycom ip 300 (alice & bob) are able to register to ser but Subscribe/Notify via SIMPLE don't work !? When i try to call alice from bob or bob from alice ser reply 404 not found !!!!!!! I wasted much time with ethereal to find the solution. Thanks for help Harry -:( Chain INPUT (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 1273 885K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 7 429 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 state NEW 70 4610 ACCEPT all -- eth0 * 192.168.0.0/24 0.0.0.0/0 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:2401 state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:53 state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:123 state NEW 0 0 ACCEPT icmp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 icmp type 0 code 0 state NEW 0 0 ACCEPT icmp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 icmp type 8 code 0 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:5060 state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:5060 state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpts:35000:65000 state NEW 678 32876 REJECT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 reject-with tcp-reset 26 1994 REJECT all -- ppp0 * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-net-prohibited Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT all -- eth0 * 192.168.0.0/24 0.0.0.0/0 state NEW 0 0 ACCEPT all -- * eth0 192.168.0.0/24 0.0.0.0/0 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:2401 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:2401 state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:53 state NEW 0 0 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp dpt:53 state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:123 state NEW 0 0 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp dpt:123 state NEW 0 0 ACCEPT icmp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 icmp type 0 code 0 state NEW 0 0 ACCEPT icmp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 icmp type 8 code 0 state NEW 0 0 ACCEPT icmp -- * ppp0 0.0.0.0/0 0.0.0.0/0 icmp type 0 code 0 state NEW 0 0 ACCEPT icmp -- * ppp0 0.0.0.0/0 0.0.0.0/0 icmp type 8 code 0 state NEW 0 0 ACCEPT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:5060 state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:5060 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:5060 state NEW 0 0 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp dpt:5060 state NEW 0 0 ACCEPT udp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 udp dpts:35000:65000 state NEW 0 0 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp dpts:35000:65000 state NEW 0 0 REJECT tcp -- ppp0 * 0.0.0.0/0 0.0.0.0/0 reject-with tcp-reset 0 0 REJECT all -- ppp0 * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-net-prohibited 0 0 REJECT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 reject-with tcp-reset 0 0 REJECT all -- * ppp0 0.0.0.0/0 0.0.0.0/0 reject-with icmp-net-prohibited Chain OUTPUT (policy DROP 1 packets, 164 bytes) pkts bytes target prot opt in out source destination 2072 424K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 7 429 ACCEPT all -- * lo 0.0.0.0/0 0.0.0.0/0 state NEW 32 2432 ACCEPT all -- * eth0 192.168.0.0/24 0.0.0.0/0 state NEW 47 2820 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:2401 state NEW 80 5888 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp dpt:53 state NEW 0 0 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp dpt:123 state NEW 0 0 ACCEPT icmp -- * ppp0 0.0.0.0/0 0.0.0.0/0 icmp type 0 code 0 state NEW 0 0 ACCEPT icmp -- * ppp0 0.0.0.0/0 0.0.0.0/0 icmp type 8 code 0 state NEW 0 0 ACCEPT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 tcp dpt:5060 state NEW 0 0 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp dpt:5060 state NEW 0 0 ACCEPT udp -- * ppp0 0.0.0.0/0 0.0.0.0/0 udp dpts:35000:65000 state NEW 0 0 REJECT tcp -- * ppp0 0.0.0.0/0 0.0.0.0/0 reject-with tcp-reset 0 0 REJECT all -- * ppp0 0.0.0.0/0 0.0.0.0/0 reject-with icmp-net-prohibited __________________________________________________________________ Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/

19 years, 5 months

[Serusers] compiling ser core 0.9.0 on OS X

by Benjamin Black

in case this hasn't been reported previously, compiling ser core on OS X requires a very minor change to daemonize.c: #include <sys/time.h> has to be above #include <sys/resource.h> if i should submit a patch for this triviality, let me know. otherwise, i'll assume this is sufficient. ben

19 years, 5 months

← Newer
1
...
38
39
40
41
42
43
44
...
70
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users April 2005