sr-users April 2005

sr-users@lists.kamailio.org

250 participants
697 discussions

[Serusers] Register authentication with ser.

by Alex

Hi all I need a little help with that. I have installation of ser-0.8.14 and freeradius1.02. I am checking my register requests with ngrep and it's coming on port 5060 with no problem. The problem is authentication, I can't authenticate users through radius, freeradius working properly i checked that with radiusclient, but the register request is not going through authentication in the radius.( I don't see anything happens in the radius logs) If there any way to debug the ser ( i have debug=9 inside ser.cfg). In order to see what's happening when the request is coming, and if it's going to the radius or not. ser.cfg ----------------------------------- loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" -------------------- modparamd"auth_radius", "radius_config","/usr/local/etc/radiusclient/radiusclient.conf") modparam("auth_radius", "service_type", 15) ---------------------- if (method=="REGISTER") { log(1, "REGISTER: Authenticating user\n"); if (!radius_www_authorize("")) { log(1, "REGISTER: challenging user\n"); www_challenge("", "0"); break; }; setflag(1); save("location"); sl_send_reply("200","ok"); break; }; ------------------------ Thanks for any help.

19 years, 5 months

[Serusers] weird logs in syslogd

by Barry Murphy

Why do i receive these? Apr 14 15:35:47 max ser[60541]: record_route(): Double attempt to record-route Apr 14 15:35:47 max /kernel: Apr 14 15:35:47 max ser[60541]: record_route(): Double attempt to record-route Apr 14 15:35:47 max ser[60541]: ERROR: send_rtpp_command: can't connect to RTP proxy Apr 14 15:35:47 max /kernel: Apr 14 15:35:47 max ser[60541]: ERROR: send_rtpp_command: can't connect to RTP proxy Apr 14 15:35:47 max ser[60541]: WARNING: rtpp_test: can't get version of the RTP proxy Apr 14 15:35:47 max ser[60541]: WARNING: rtpp_test: support for RTP proxy has been disabled temporarily Apr 14 15:35:47 max ser[60541]: ERROR: force_rtp_proxy2: support for RTP proxy is disabled Apr 14 15:35:47 max /kernel: Apr 14 15:35:47 max ser[60541]: ERROR: force_rtp_proxy2: support for RTP proxy is disabled Apr 14 15:37:35 max ser[60537]: record_route(): Double attempt to record-route Apr 14 15:37:35 max /kernel: Apr 14 15:37:35 max ser[60537]: record_route(): Double attempt to record-route Apr 14 15:37:35 max ser[60537]: ERROR: send_rtpp_command: can't connect to RTP proxy Apr 14 15:37:35 max /kernel: Apr 14 15:37:35 max ser[60537]: ERROR: send_rtpp_command: can't connect to RTP proxy Apr 14 15:37:35 max ser[60537]: WARNING: rtpp_test: can't get version of the RTP proxy Apr 14 15:37:35 max ser[60537]: WARNING: rtpp_test: support for RTP proxy has been disabled temporarily Apr 14 15:37:35 max ser[60537]: ERROR: force_rtp_proxy2: support for RTP proxy is disabled Apr 14 15:37:35 max /kernel: Apr 14 15:37:35 max ser[60537]: ERROR: force_rtp_proxy2: support for RTP proxy is disabled

19 years, 5 months

[Serusers] error: 500 command 'ul_show_contact' not available

by Brian McCrary

Hello, I am a new SER user, and would like to use this application for carrier class VoIP services. I've got SER to process calls fine using a simple routing list, but am having some trouble setting up authentication. I've tried to look through prior mailings but did not see this error come up. When trying to add a user using the command "serctl add 7778881000 7778881000 7778881000@localhost", I get "error: 500 command 'ul_show_contact' not available" after entering the mysql password (doesn't matter if it's correct or not and from the logs I don't think SQL is even playing a part here yet.) The debug messages says: 1(12965) ERROR: fifo_server: command ul_show_contact is not available 1(12965) qm_free(e55c8, 102ea8), called from fifo_server.c: fifo_server(547) 1(12965) qm_free: freeing frag. 102e90 alloc'ed from fifo_server.c: trim_filename(311) 1(12965) **** done consume 1(12965) ERROR: fifo_server: command must begin with :: 7778881000(a)lwav.net 1(12965) **** done consume I've tried adding a user called 7778881000(a)lwav.net too but it doesn't seem to matter (lwav.net is my SIP_DOMAIN variable.) Here's my SER version info in case that matters: version: ser 0.9.0 (sparc64/solaris) flags: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, DBG_QM_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 @(#) $Id: main.c,v 1.197 2004/12/03 19:09:31 andrei Exp $ main.c compiled on 15:00:54 Apr 6 2005 with gcc 3.4 Thanks, Brian

19 years, 5 months

[Serusers] "serctl moni" problem

by Bruno Oliveira

when I exec serctl moni show this in syslog /usr/sbin/ser[30466]: ERROR: open_reply_pipe: open error (/tmp/ser_receiver_31325): Permission denied /usr/sbin/ser[30466]: ERROR: fifo_reply: no reply pipe /tmp/ser_receiver_31325 anyone know why ? -- []s, Bruno "Niggas" Oliveira Belo Horizonte - MG Msn: n1gg4s(a)gmail.com "Todo o nosso descontentamento por aquilo que nos falta procede da nossa falta de gratidão por aquilo que temos."

19 years, 5 months

[Serusers] "serctl moni" problem

by Bruno Oliveira

hi when I type the command serctl moni only appears the line "[cycle #: 1; if constant make sure server lives and fifo is on]" this is normal? how I arrange this? -- []s, Bruno "Niggas" Oliveira Belo Horizonte - MG Msn: n1gg4s(a)gmail.com "Todo o nosso descontentamento por aquilo que nos falta procede da nossa falta de gratidão por aquilo que temos."

19 years, 5 months

[Serusers] Unsuccesfull registration with serweb

by Nicusor Spinu

Hi , could anybody tell me what is the reason why I get the error message "Sorry, there was an error when sending mail. Please try again later" when trying to register a user with serweb? All user details entered in user management form are stored in "pending" table because of unsuccesfull emailing. Thank you in advance, Nicusor __________________________________ Do you Yahoo!? Yahoo! Small Business - Try our new resources site! http://smallbusiness.yahoo.com/resources/

19 years, 5 months

[Serusers] LCS messenger and SER, one way voice

by deb ale

Hi, I have the following problem. A messenger 5.1 connected to an LCS server 2005. A SIP phone connected to SER. When I call from messenger to SIP phone I have the voice only from SIP phone to messenger and not other way. There is not RTP packet send from messenger. If I declare messenger to as SER user, it's working fine. Has anybody an hand for me? Alexis --------------------------------- Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail

19 years, 5 months

Re: [Serusers] sending bye using sipsak [onsip.org]

by Pavel Siderov

Thanks Paul. Now I got sipsak -f bye.txt -s sip:1.2.3.4 ** give up retransmissioning.... And the call continued :( Regards, Pavel ----- Original Message ----- From: Java Rockx To: Pavel Siderov Cc: serusers(a)lists.iptel.org Sent: Wednesday, April 13, 2005 4:29 PM Subject: Re: [Serusers] sending bye using sipsak [onsip.org] Your sipsak command should be sipsak -f bye.txt -s sip:1.2.3.4 Regards, Paul On 4/13/05, Pavel Siderov <pi(a)hostmates.com> wrote: Hi guys, I read the tutorial on http://onsip.org ( http://www.onsip.org/modules/xoopsfaq/index.php?cat_id=3#2 ) about sending byes but has no success with my tries: bye.txt: BYE sip:35923456@1.2.3.4 SIP/2.0 From: sip:222485@5.6.7.8;user=phone To: sip:35923456@1.2.3.4:5060;user=phone Contact: sip:222485@5.6.7.8;user=phone CSeq: 100 BYE Call-ID: 63450d656cbd4f55bec37cbfeb50a181(a)192.168.2.111 Max-Forwards: 16 Content-Length: 0 Call-ID is taken after call is has started. 1.2.3.4 is the ip of my pstn provider and 5.6.7.8 of my ser box. When I try to send it using sipsak: sipsak -f bye.txt -s 1.2.3.4 I got the following error: error: SIPURI doesn't not begin with sip Any suggestions / ideas what I'm doing wrong. Thanks, Pavel _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

19 years, 5 months

[Serusers] Messenger 5.1 Presence

by Nigel Clarke

Does Microsoft Messenger 5.1 have a problem with presence updates? I get updates for 4.6 clients but not for 5.1. ser.cfg is: cat ser.cfg # # $Id: ser.cfg,v 1.21.2.1 2003/07/30 16:46:18 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=4 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 #children=4 fifo="/tmp/ser_fifo" alias="xxx.com" alias="xxx.local" alias="sip.xxx.local" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 1) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # -- registrar parameters modparam("registrar","default_expires",1800) modparam("registrar","use_domain",0) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # }; log(1,"request for register received"); save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } Regards, Nigel

19 years, 5 months

[Serusers] sending bye using sipsak [onsip.org]

by Pavel Siderov

Hi guys, I read the tutorial on http://onsip.org ( http://www.onsip.org/modules/xoopsfaq/index.php?cat_id=3#2 ) about sending byes but has no success with my tries: bye.txt: BYE sip:35923456@1.2.3.4 SIP/2.0 From: sip:222485@5.6.7.8;user=phone To: sip:35923456@1.2.3.4:5060;user=phone Contact: sip:222485@5.6.7.8;user=phone CSeq: 100 BYE Call-ID: 63450d656cbd4f55bec37cbfeb50a181(a)192.168.2.111 Max-Forwards: 16 Content-Length: 0 Call-ID is taken after call is has started. 1.2.3.4 is the ip of my pstn provider and 5.6.7.8 of my ser box. When I try to send it using sipsak: sipsak -f bye.txt -s 62.244.175.133 I got the following error: error: SIPURI doesn't not begin with sip Any suggestions / ideas what I'm doing wrong. Thanks, Pavel

19 years, 5 months

← Newer
1
...
34
35
36
37
38
39
40
...
70
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users April 2005