Hi!
How to configure the ser with freeredius u please send
me the configuration file.
When i configured and run it shows the errors is
auth_radius - Initializing
0(4853) auth_radius: Error opening configuration
file
0(4853) init_mod(): Error while initializing
module
auth_radius
ERROR: error while initializing modules
Please send me the configuration file
Thank u,
Sailatha.
__________________________________
Do you Yahoo!?
Yahoo! Mail …
[View More]- You care about security. So do we.
http://promotions.yahoo.com/new_mail
[View Less]
Greetings,
After picking up where my supervisor left off, I managed to get SerWeb properly installed on a system running Debian Linux. PHP, Apache, and MySQL are also installed (the correct versions) and are running properly.
The problem comes when I go to the Admin page for SerWeb. I enter the proper username and password (after using the serctl to change the password). When I click the login button, the form activates as though the information has been submitted. However, the form does not …
[View More]take me anywhere but the login screen. It also does not indicate a bad username or password.
I have configured ser's www_authorize and www_challenge lines to use the machine's IP address, as well as the config.php's root_uri, and set the line under domain name to "$this->realm=$this->domainname=$this->default_domain="<machine ip address>"".
I have also set Apache to use the IP address instead trying to guess the server name.
Am I missing something that is preventing this from working? Have I royally screwed up my configuration?
Please provide some insite as to what is going wrong here, as I am very new to Ser and SerWeb.
Thanks,
Justin
[View Less]
Hello List.
A quick question for mediaproxy users: What does it means the HOLD
status?
I see this when i execute the ./sessions command :
Caller Via Called Status
Duration Codec Type Traffic
----------------------------------------------------------------------------
--------------------------------------------
200.xx.xx.x:50179 - xx.xx.xx.35:35050 - xx.xx.xx.66:23240 hold (558)
9'48" G723 Audio 49.50k/99.94k/51.34k
The call …
[View More]is already over, but the mediaproxy still shows the hold status.
Any ideas?
Thanks in advance,
Regards
Ricardo Martinez
[View Less]
Hi,
I have 2 SIP Proxy running SER 0.8.14 on Linux SuSe.
One in UK and the other one in India. We have
numbering plan to re-write host and then transefer the
call based on number to either India or UK.
When we make calls from UK. Everything is perfect -
Rings, connects and RTP flows.
But when India calls. We don't get any voice. UK Phone
rings, connects but no RTP. All the phones use port
6000. We are using PA168 phones.
Any body has any clue?
Much appreciate your help.
Thanks and Regards,
…
[View More]Suvendu.
________________________________________________________________________
Yahoo! India Matrimony: Find your life partner online
Go to: http://yahoo.shaadi.com/india-matrimony
[View Less]
Hi again all,
I got a new version of ser from cvs few days ago and it seems there are major
changes in nathelper. Now the configuration that used to work before gives me
this kind of error calling force_rtp_proxy():
ERROR: extract_mediaport: no protocol type in `m='
ERROR: force_rtp_proxy2: can't extract media port from the message
and rtpproxy is not contacted at all.
does anybody have an idea about how to resolve this? Looking at the source
protocol types are 'udp', 'udptl', 'rtp/avp' …
[View More]but I don't really know what
they are compared against. Tested with kphone and xlite, both give same
error, so I guess it is not the client sending invalid sip messages...
Maybe there is some undocumented change in fuction usage, so I hope to hear
from someone aware of it (Jan? Jiri?)
Thanks
--
Giovanni Balasso
giaso(a)yahoo.it
[View Less]
Hello list.
I have a question on How to Start Mediaproxy server. When i start
mediaproxy from the console i obtain the following error:
[root@sipproxy mediaproxy]# ./mediaproxy.py
File "./mediaproxy.py", line 84
print >>sys.stderr, "Mediaproxy error: %s. Exiting." % why
^
SyntaxError: invalid syntax
however i have installed Python2.3
[root@sipproxy mediaproxy]# python
python python1.5 python2 python2.2 python2.3
When i start mediaproxy …
[View More]with the next lines it works ok :
[root@sipproxy mediaproxy]# python2.3 mediaproxy.py
So i made a test and i started mediaproxy with the original python.
[root@sipproxy mediaproxy]# python mediaproxy.py
File "mediaproxy.py", line 84
print >>sys.stderr, "Mediaproxy error: %s. Exiting." % why
^
SyntaxError: invalid syntax
And i obtained the same initial error.
My question is : Is there a way to force mediaproxy to start with the
pyhton2.3? and therefore make mediaproxy start with %./mediaproxy.py and
pyhton2.3
Hope that someone can help me here.
Thanks in advance,
Ricardo Martinez.-
[View Less]
Hi everone!
I use ser 0.8.14 with auth_radius and group_radius and get from time to
time messages like the following in my logs:
Feb 9 01:20:49 sip.xxx.com /usr/sbin/ser[1829]: rc_ip_hostname:
couldn't look up host by addr: D4754D54
Feb 9 01:20:49 sip.xxx.com /usr/sbin/ser[1829]: rc_send_server: no
reply from RADIUS server unknown:1812
Can anybody tell me where they come from? I cannot experience any
negativ effects of these messages, like users unable to register, etc.
Best regards
…
[View More]Kai
--
Kai Militzer WESTEND GmbH | Internet-Business-Provider
Technik CISCO Systems Partner - Authorized Reseller
Lütticher Straße 10 Tel 0241/701333-11
km(a)westend.com D-52064 Aachen Fax 0241/911879
[View Less]
I have not followed the thread so don't know if this is releveant.
I think you should not put the sip: prefix in the alias option of your
config file.
Hope it helps,
Samuel.
Unclassified
>>> pat newham <pnewham(a)yahoo.com> 02/08/05 09:09PM >>>
Hi Marian,
I carried out the test you suggested and the message
printed out in /var/log/messages, so I still have the
483, too many hops error. Therefore the client uri
definately matched the domain part of the sip url. As
…
[View More]mentioned previously I change the domain in /etc/hosts
on the ser machine(and also added the gateway),I added
the dns address in /etc/resolve.conf and I also edited
the address in /etc/profile.
Therefore at this stage I dont think its the
domain....at least i dont think so anyway...I have
checked that ser is listening on the address specified
with the specified port using netstat -tunap and it is
running.
When I sniff the loopback interface on ser I see tht
the invite message is repeatedly issued to the ser
machine. The sequence for this was shown in the first
email.I have included my default config below (its
pretty basic) and any further thoughts would be
appreciated. Both clients and ser are on public ip's.
Kindest regards,
Pat
>#
># $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei
Exp $
>#
># simple quick-start config script
>#
>
># ----------- global configuration parameters
------------------------
>
>#debug=3 # debug level (cmd line:
-dddddddddd)
>#fork=yes
>#log_stderror=no # (cmd line: -E)
>
>/* Uncomment these lines to enter debugging mode
>debug=7
>fork=no
>log_stderror=yes
>*/
>
>check_via=no # (cmd. line: -v)
>dns=no # (cmd. line: -r)
>rev_dns=no # (cmd. line: -R)
>#port=5060
>#children=4
>fifo="/tmp/ser_fifo"
>
>alias=xxx.xxx.xxx.xxx #ser public address
>alias=127.0.0.1 #loopback address if it makes
#a difference
>alias=sip:xxx.xxx.xxx.xxx #makes a diff??
>
># ------------------ module loading
----------------------------------
>
># Uncomment this if you want to use SQL database
>loadmodule "/usr/lib/ser/modules/mysql.so"
>
>loadmodule "/usr/lib/ser/modules/sl.so"
>loadmodule "/usr/lib/ser/modules/tm.so"
>loadmodule "/usr/lib/ser/modules/rr.so"
>loadmodule "/usr/lib/ser/modules/maxfwd.so"
>loadmodule "/usr/lib/ser/modules/usrloc.so"
>loadmodule "/usr/lib/ser/modules/registrar.so"
>loadmodule "/usr/lib/ser/modules/textops.so"
># Uncomment this if you want digest authentication
># mysql.so must be loaded !
>loadmodule "/usr/lib/ser/modules/auth.so"
>loadmodule "/usr/lib/ser/modules/auth_db.so"
>
># ----------------- setting module-specific
parameters ---------------
>
># -- usrloc params --
>
>modparam("usrloc", "db_mode", 0)
>
># Uncomment this if you want to use SQL database
># for persistent storage and comment the previous
line
>#modparam("usrloc", "db_mode", 2)
>
># -- auth params --
># Uncomment if you are using auth module
>#
>modparam("auth_db", "calculate_ha1", yes)
>#
># If you set "calculate_ha1" parameter to yes (which
true in this config),
># uncomment also the following parameter)
>#
>modparam("auth_db", "password_column", "password")
>
># -- rr params --
># add value to ;lr param to make some broken UAs
happy
>modparam("rr", "enable_full_lr", 1)
>
># ------------------------- request routing logic
-------------------
>
># main routing logic
>
>route{
>
> # initial sanity checks -- messages with
> # max_forwards==0, or excessively long requests
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> break;
> };
> if ( msg:len > max_len ) {
> sl_send_reply("513", "Message too big");
> break;
> };
>
> # we record-route all messages -- to make sure that
> # subsequent messages will go through our proxy;
that's
> # particularly good if upstream and downstream
entities
> # use different transport protocol
> record_route();
> # loose-route processing
> if (loose_route()) {
> t_relay();
> break;
> };
>
> # if the request is for other domain use UsrLoc
> # (in case, it does not work, use the following
command
> # with proper names and addresses in it)
> if (uri==myself) {
>
> log(1,"test if this prints out");
> if (method=="REGISTER") {
>
># Uncomment this if you want to use digest
authentication
># if (!www_authorize("xxx.xxx.xxx.xxx",
"subscriber")) {
># www_challenge("xxx.xxx.xxx.xxx", "0");
># break;
># };
>
> save("location");
> break;
> };
>
> # native SIP destinations are handled using our
USRLOC DB
> if (!lookup("location")) {
> sl_send_reply("404", "Not Found");
> break;
> };
> };
> # forward to current uri now; use stateful
forwarding; that
> # works reliably even if we forward from TCP to UDP
> if (!t_relay()) {
> sl_reply_error();
> };
>
>}
>
--- Marian Dumitru <marian.dumitru(a)voice-sistem.ro>
wrote:
> Hi Pat,
>
> do some small test - add at the beginning of your
> script:
> if (uri==myself) {
> log(1,"uri is myself\n");
> };
>
> and see if you get that message in ser output/logs.
> Just to be sure that
> myself test is passed.
>
> Best regards,
> Marian
>
> pat newham wrote:
> >
> > The domain name is the ip address of the ser
> server
> > i.e. a user registers as 2001(a)xxx.xxx.xxx.xxx.
> > Therefore I set alias=xxx.xxx.xxx.xxx in my
> ser.cfg.
> >
> > Pat
> > --- Marian Dumitru
> <marian.dumitru(a)voice-sistem.ro>
> > wrote:
> >
> >>Hi Pat,
> >>
> >>Set as alias the domain name (as DNS name). If
> your
> >>requests look like
> >>user(a)foo.org, set alias=foo.org
> >>
> >>Best regards,
> >>Marian
> >>
> >>pat newham wrote:
> >>
> >>>Thank you for reply. It is still not working
> >>
> >>correctly
> >>
> >>>Im afraid.
> >>>
> >>>I have added the lines :
> >>>
> >>>alias= xxx.xxx.xxx.xxx (being the public address
> >>
> >>of my
> >>
> >>>ser server)
> >>>alias =127.0.0.1
> >>>
> >>>at the start of the config file and added
> >>>
> >>>if (uri==myself)
> >>>{
> >>> bla
> >>>}
> >>>
> >>>in the middle of my config.
> >>>
> >>>Other than that my config is just the default
> one.
> >>
> >>As
> >>
> >>>I mentioned previously I have both user agents
> and
> >>
> >>ser
> >>
> >>>on public addresses. There is no nat or even
> >>>authentication in the current setup. It is the
> >>>simplest scenario, they are all connected via a
> >>
> >>hub
> >>
> >>>and all have public addresses.
> >>>
> >>>A sniff of the eth0 i/f of ser revealed:
> >>>
> >>>an invite going from UA1 to SER. A 100 trying
> >>
> >>message
> >>
> >>>sent back to UA1. Then a 483 too many hops
> message
> >>>sent from ser to UA1.
> >>>
> >>>A sniff of the loopback i/f revealed an invite
> >>
> >>message
> >>
> >>>sent from ser address to ser address repeatedly.
> >>>
> >>>Any further ideas?
> >>>Thank you,
> >>>Pat.
> >>>
> >>> --- Marian Dumitru
> >>
> >><marian.dumitru(a)voice-sistem.ro>
> >>
> >>>wrote:
> >>>
> >>>
> >>>>Hi Pat,
> >>>>
> >>>>Most sure "uri==myself" doesn't match for your
> >>
> >>RURI
> >>
> >>>>domain. Be sure SER
> >>>>consider as served domain the RURI domain. At
> >>>>startup you see the
> >>>>listing of all served domains by SER. If you
> want
> >>
> >>to
> >>
> >>>>add some more, use
> >>>>the alias config option:
> >>>> alias=some.new.domain
> >>>>
> >>>>Best regards,
> >>>>Marian
> >>>>
> >>>>pat newham wrote:
> >>>>
> >>>>
> >>>>>Hello,
> >>>>>
> >>>>>I am new to this list and SEr and am trying a
> >>
> >>very
> >>
> >>>>>simple scenario. I would like to establish a
> call
> >>>>>using SER via two grandstream BT100's(UA1 and
> >>>>
> >>>>UA2).
> >>>>
> >>>>
> >>>>>The two agent and SER are all on public
> >>
> >>addresses.
> >>
> >>>>The
> >>>>
> >>>>
> >>>>>two agents register with SER ok. However when I
> >>>>
> >>>>try to
> >>>>
> >>>>
> >>>>>ring UA2 from UA1, I get a 483 error. I know
> that
> >>>>
> >>>>this
> >>>>
> >>>>
> >>>>>mean there are too many hops. My config is
> >>>>
> >>>>practically
> >>>>
> >>>>
> >>>>>the same as the basic (i.e.
> >>
> >>standard)configuration
> >>
> >>>>>file (except for authorization and I have added
> a
> >>>>
> >>>>line
> >>>>
> >>>>
> >>>>>including an alias equal to the public address
> of
> >>>>>ser....the "if (uri==myself)" statement is
> >>
> >>correct
> >>
> >>>>I
> >>>>
> >>>>
> >>>>>think...I checked).
> >>>>>
> >>>>>I checked the loopback address as suggested in
> >>
> >>the
> >>
> >>>>>archives and can see that the invite is
> >>
> >>repeatedly
> >>
> >>>>>sent to ser itself and 100 trying messages are
> >>>>
> >>>>sent to
>
=== message truncated ===
___________________________________________________________
ALL-NEW Yahoo! Messenger - all new features - even more fun!
http://uk.messenger.yahoo.com
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
[View Less]