sr-users February 2005

sr-users@lists.kamailio.org

215 participants
467 discussions

[Serusers] Question about provisional response 100 Trying

by Francesco Bottà

Hi all, I've seen in the debug output that when a UAC setup a call to PSTN Gateway, the reply 100 Trying generated from my GW is handled from my SER with this ERROR code in the debug: ERROR: on_reply processing failed ->>>>>>>>> T_code=100, new_code=100 It's 'normal' ERROR or I've to setup a on_reply block also for this provisional response (100 Trying) or is a my ser.cfg error or, more, is a abnormal behaviour of the tm module?? After receipt of the 183 Session Progress the call going on without problem. Thanx in advance for the reply. Verbal

19 years, 9 months

[Serusers] NAT, rtpproxy.

by Amos Nungu

In my search for help, I came around this mail from Paul (Java Rockx) http://archivum.info/serusers@lists.iptel.org/2004-11/msg00608.html with the attached configuration file http://archivum.info/serusers@lists.iptel.org/2004-11/bin00015.bin In the NAT TEST section you have " if (method=="REGISTER") { fix_nated_register(); ..." Where is this function "fix_nated_register()" from..!! NB: I'm using ser.0.8.14 and gets error trying to load that function. Regards.

19 years, 9 months

[Serusers] SIP server monitoring tool: argus

by Klaus Darilion

Hi all! I found a nice monitoring tool today: argus http://argus.tcp4me.com/ It already has built-in checks for SIP and IAX. Compared to nagios - it was really easy to install and to configure. e.g. here is my config for a ser server: Group "sip-testing" { notify: mail:xxx@pernau.at Host "xxx.labs.nic.at" { Service Ping Service UDP/SIP } } The SIP monitoring is done via OPTION requests addressed to the server. Looks like any response code is fine, as long as there is a response to the request. regards, klaus

19 years, 9 months

RE: [Serusers] Turn 3xx into new Invite

by Paul Belanger

Ya, I have looked at that one, but I can see how it sends out the INVITE. -----Original Message----- From: Martin Koenig [mailto:martin.koenig@toplink-plannet.de] Sent: Tuesday, February 22, 2005 11:09 AM To: Paul Belanger Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] Turn 3xx into new Invite Hello, there is this one so far: http://lists.iptel.org/pipermail/serusers/2004-August/010977.html Didn't really help... Regards, Martin Paul Belanger schrieb: >Rumor has it yes, but I have not been successful. I posted a question >last week, and was told to search the archives. I did, but not much >came up! > >http://www.google.ca/search?hl=en&q=302+site%3Amail.iptel.org&btnG=Goog >le+Search&meta= > >I think I'm on the right track, but don't have time today to play with >it. Here is what I got so far: > ># ># $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ ># ># simple quick-start config script ># > ># ----------- global configuration parameters ------------------------ > >#debug=3 # debug level (cmd line: -dddddddddd) >#fork=yes >#log_stderror=no # (cmd line: -E) > >debug=3 >fork=no >log_stderror=yes > >check_via=no # (cmd. line: -v) >dns=no # (cmd. line: -r) >rev_dns=no # (cmd. line: -R) >#port=5060 >#children=4 >fifo="/tmp/ser_fifo" > ># ------------------ module loading ---------------------------------- > ># Uncomment this if you want to use SQL database >#loadmodule "/usr/local/lib/ser/modules/mysql.so" > >loadmodule "/usr/local/lib/ser/modules/sl.so" >loadmodule "/usr/local/lib/ser/modules/tm.so" >loadmodule "/usr/local/lib/ser/modules/rr.so" >loadmodule "/usr/local/lib/ser/modules/maxfwd.so" >loadmodule "/usr/local/lib/ser/modules/usrloc.so" >loadmodule "/usr/local/lib/ser/modules/registrar.so" >loadmodule "/usr/local/lib/ser/modules/xlog.so" > ># Uncomment this if you want digest authentication ># mysql.so must be loaded ! >#loadmodule "/usr/local/lib/ser/modules/auth.so" >#loadmodule "/usr/local/lib/ser/modules/auth_db.so" > ># ----------------- setting module-specific parameters --------------- > ># -- usrloc params -- > >modparam("usrloc", "db_mode", 0) > ># Uncomment this if you want to use SQL database ># for persistent storage and comment the previous line >#modparam("usrloc", "db_mode", 2) > ># -- auth params -- ># Uncomment if you are using auth module ># >#modparam("auth_db", "calculate_ha1", yes) ># ># If you set "calculate_ha1" parameter to yes (which true in this >config), # uncomment also the following parameter) # >#modparam("auth_db", "password_column", "password") > ># -- rr params -- ># add value to ;lr param to make some broken UAs happy modparam("rr", >"enable_full_lr", 1) > >modparam("tm", "fr_inv_timer", 15 ) >modparam("tm", "fr_timer", 10 ) > ># ------------------------- request routing logic ------------------- > ># main routing logic > >route{ > > # initial sanity checks -- messages with > # max_forwards==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > if ( msg:len > max_len ) { > sl_send_reply("513", "Message too big"); > break; > }; > > # we record-route all messages -- to make sure that > # subsequent messages will go through our proxy; that's > # particularly good if upstream and downstream entities > # use different transport protocol > record_route(); > # loose-route processing > if (loose_route()) { > t_relay(); > break; > }; > > # if the request is for other domain use UsrLoc > # (in case, it does not work, use the following command > # with proper names and addresses in it) > if (uri==myself) { > > if (method=="REGISTER") { > save("location"); > break; > }; > }; > > > if (method=="INVITE") { > rewritehostport("216.143.130.70:5060"); > t_on_reply("1"); > t_on_failure("1"); > t_relay(); > break; > } > >} > >onreply_route[1] { > xlog("L_NOTICE", "Reply status %rs: Reason %rr\n"); > if (t_check_status("302")) { > xlog("L_NOTICE", "We got a 302!!!!!\n"); > ## ADD CODE TO SEND OUT INVITE!! ### > }; >} > >failure_route[1] { > xlog("L_NOTICE", "Failure status %rs: Reason %rr\n"); } > >Let me know if you find any information. > >Paul > >-----Original Message----- >From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On >Behalf Of Martin Koenig >Sent: Tuesday, February 22, 2005 11:00 AM >To: serusers(a)lists.iptel.org >Subject: [Serusers] Turn 3xx into new Invite > > >Hello, > >is it possible to take 3xx-responses in a reply_route and turn them >into >a new INVITE on Ser using append_branch or simliar? > >Regards, >Martin > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers > > >

19 years, 9 months

RE: [Serusers] Turn 3xx into new Invite

by Paul Belanger

Rumor has it yes, but I have not been successful. I posted a question last week, and was told to search the archives. I did, but not much came up! http://www.google.ca/search?hl=en&q=302+site%3Amail.iptel.org&btnG=Google+S… I think I'm on the right track, but don't have time today to play with it. Here is what I got so far: # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) debug=3 fork=no log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/xlog.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("tm", "fr_inv_timer", 15 ) modparam("tm", "fr_timer", 10 ) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { save("location"); break; }; }; if (method=="INVITE") { rewritehostport("216.143.130.70:5060"); t_on_reply("1"); t_on_failure("1"); t_relay(); break; } } onreply_route[1] { xlog("L_NOTICE", "Reply status %rs: Reason %rr\n"); if (t_check_status("302")) { xlog("L_NOTICE", "We got a 302!!!!!\n"); ## ADD CODE TO SEND OUT INVITE!! ### }; } failure_route[1] { xlog("L_NOTICE", "Failure status %rs: Reason %rr\n"); } Let me know if you find any information. Paul -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Martin Koenig Sent: Tuesday, February 22, 2005 11:00 AM To: serusers(a)lists.iptel.org Subject: [Serusers] Turn 3xx into new Invite Hello, is it possible to take 3xx-responses in a reply_route and turn them into a new INVITE on Ser using append_branch or simliar? Regards, Martin _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

19 years, 9 months

[Serusers] Manually registering SIP user

by Tan, Chiang Kang

Hi all, I'm new to SER and would like to know how to register with SER manually without using a SIP UA. As basically I have a SIP client that does not do registration, but would like SER to do the signaling for me to connect to SIP users on say another domain. I have mysql running, and I can insert subscribers. So is there any specific field in the ser database (other than username, email) I need before I can use my SIP user to call another user? Any help will be greatly appreciated. cheers Chiang

19 years, 10 months

Re: [Serusers] NATHELPER missing module

by Greger V. Teigre

I don't know. Never used it. Wouldn't count on it though. Why don't you go to 0.9.0? Plenty of more good stuff to play with ;-) Go to www.iptel.org and CVS link for info on how to get a cvs version. The tag is 0.9.0. g-) Nicolas Ruiz wrote: > I have already put that. > > I have the SER 0.8.12 version, is it good? > >> 0( > > -----Message d'origine----- > De : Greger V. Teigre [mailto:greger@teigre.com] > Envoyé : mardi 22 février 2005 15:51 > À : Nicolas Ruiz; serusers(a)lists.iptel.org > Objet : Re: [Serusers] NATHELPER missing module > > > Add at the beginning of your ser.cfg: > loadmodule "/dirtoser/ser/modules/nathelper.so" > g-) > > Nicolas Ruiz wrote: >> Hi, >> >> I load the module NATHELPER : >> >> modparam("nathelper", "natping_interval", 10) >> modparam("registrar", "nat_flag", 6) >> >> When I write: >> >> if (nat_uac_test("3")) { >> force_rport(); >> fix_nated_contact(); >> }; >> >> I run ser and I have : parse error (121,22-23): unknown command, >> missing loadmodule? >> >> >> _______________________________________________ >> Serusers mailing list >> serusers(a)lists.iptel.org >> http://lists.iptel.org/mailman/listinfo/serusers

19 years, 10 months

[Serusers] SER+Asterisk+NAT. Need a working example or need to talk about it.

by Alexey N. Kovyrin ＠ Home

Hello! I'm implementing some VoIP system with SER+Asterisk. I've already implemented many features, but all of them was tested only in non-NAT environments. Now, at final-alpha stage (before starting massive beta tests) I found big (as for me) problem with NAT... Now I need a working example of ser.cfg (it will be really good) or, simply, to talk with someone, who realized such scheme... My current problem is with ua-to-ua calls between my users... I have a following call routing scheme... UA1->...->SER->Asterisk->SER->...->UA2... Description: UA1 calls to some number, ser routes this call to asterisk, asterisk resolves that number to some account (login name, that being used by users to login to ser) and makes call to sip/ser/user_name... and ser routes this call for user with such login... I have strange problems with natted UAs... Please, send me a working example of similiar schemes (ser+asterisk+nat)... or help me by a word ;-) Great thanks! -- /Scoundrel

19 years, 10 months

[Serusers] End User IP address in Radius packet

by M.V. Jaga Mohan

Hi All, I am using SER 0.8.14 with Freeradius 1.0.1 with postgresql as database. Till authentication and authorization everything is fine. But my problem is when an end user(calling party) is succefully authenticated I want its IP address to be updated in the database using radius. But SER is not sending the IP Address in the Radius packet. How to configure the SER so that it sends the end user agents IP Address also. Any help in this regard is highly appreciated,. Thanks Jagan =====

19 years, 10 months

[Serusers] SER stateful server

by Nicolas Ruiz

Hi, How can I pass all request by SER (RTP and SIP messages). Thanks for you help Best regards Nicolas RUIZ

19 years, 10 months

← Newer
1
...
10
11
12
13
14
15
16
...
47
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users February 2005