sr-users November 2005

sr-users@lists.kamailio.org

245 participants
571 discussions

[Serusers] Zyxel 2602HW bug?
by Federico Giannici 27 Nov '05

27 Nov '05

I have found a strange bug in the ZyXEL 2602HW (firmware "V3.40(MV.3)") that make it impossible to use it to make calls: the Request URI of the ACK and BYE messages is addressed to the SIP server ("sip:195.120.250.50") instead of the other UA (i.e. something like "sip:123@1.2.3.4"). I cannot understand how such an huge bug is not experienced by somebody else. Anybody had the same problem with the 2602HW? Thanks. -- ___________________________________________________ __ |- giannici(a)neomedia.it |ederico Giannici http://www.neomedia.it ___________________________________________________

1 1

RE: [Users] t_check_status
by Douglas Garstang 27 Nov '05

27 Nov '05

I thought AVP stuff was database related.... this confuses me even more. I am reading the documentation you know.... constantly. Considering it looks like it was written by the people who developed OpenSER, there's a lot of implied/assumed knowledge there, and the scripting language is very high level, it's bloody difficult to work out what the documentation means. For example... where's the definitiaion of AVP? I still can't find what an 'rpid' is. -----Original Message----- From: Juha Heinanen [mailto:jh@tutpro.com] Sent: Sat 11/26/2005 9:29 PM To: Douglas Garstang Cc: users(a)openser.org Subject: RE: [Users] t_check_status Douglas Garstang said: > I really don't even get the point of what an AVP is. Something to do with > databases. I don't see why database interaction is needed to set a timer. > That's crazy. > i don't know what is cracy, since no database interaction is needed to set a timer. timers can be set in many different ways. read usrav documentation. --juha

2 1

[Serusers] Gateway registration and call forwarding
by Voipers Portugal 27 Nov '05

27 Nov '05

Hello again Imagine the following scenario: I have a SER server working with my SIP users. Imagine that i want to offer them the possibility of making PSTN calls. I have just made an agreement with a termination provider and they gave me a user id, a password and the gateway address. They told me i needed to register before making calls.. How can i make SER register in that gateway? And then to allow the PSTN calls, what should I do? Jose simoes

2 1

RE: [Users] t_check_status
by Douglas Garstang 27 Nov '05

27 Nov '05

I have read the tm documentation, many many times. I guess I don't follow, probably because I didn't write the code. The docs for tm say that setting fr_timer_avp overrides fr_timer. So? Why does it need to be overridden? Why not just use fr_timer? If the lcr module doesn't have any timers of it's own, then what these for...? modparam("lcr","fr_inv_timer_avp","fr_inv_timer_avp") modparam("lcr","fr_inv_timer",90) modparam("lcr","fr_inv_timer_next",30) I really don't even get the point of what an AVP is. Something to do with databases. I don't see why database interaction is needed to set a timer. That's crazy. Doug. -----Original Message----- From: Juha Heinanen [mailto:jh@tutpro.com] Sent: Sat 11/26/2005 5:38 PM To: Douglas Garstang Cc: Subject: RE: [Users] t_check_status Douglas Garstang writes: > Why do I need to set this timer using an avp? Is this mandatory? Why? read tm documentation. > I find it hard to believe I need to integrate with a database to set > a timer. Why can't I just set the other timers instead? And, as > before, what's the relationship between them? Why don't the lcr > timers have an effect? In fact, why are they even there? They don't > seem to have any use. lcr module doesn't have any timers of its own. it just uses tm timers. > And you didn't answer my question about t_check_status. That has > nothing to do with timers. t_relay() times out, t_check_status is > used to check the code of the last SIP message, which was null > because there _was no_ reply, and somehow t_check_status magically > matches 408|500|503....? i only responded to your lcr related question. t_check_status has nothing to do with lcr. -- juha

2 1

RE: [Users] openser.cfg Samples
by Douglas Garstang 26 Nov '05

26 Nov '05

Thanks, but unfortunately there's nothing there relating to lcr, dispatcher, redundancy or failover, which I've been torturing over for a week now. -----Original Message----- From: Elena Ramona Modroiu [mailto:ramona@voice-system.ro] Sent: Sat 11/26/2005 3:18 AM To: Douglas Garstang Cc: users(a)openser.org Subject: Re: [Users] openser.cfg Samples Hi, in sources there is a directory 'examples' under the main directory. http://cvs.sourceforge.net/viewcvs.py/openser/sip-server/examples/ Ramona Douglas Garstang wrote: >Does anyone know where I could find some openser.cfg sample files? Been looking and there's absolutely squat available. (hint hint). This would be a very very useful resource... > >Thanks, >Doug. > > > >------------------------------------------------------------------------ > >_______________________________________________ >Users mailing list >Users(a)openser.org >http://openser.org/cgi-bin/mailman/listinfo/users > >

1 0

RE: [Users] openser.cfg Samples
by Douglas Garstang 26 Nov '05

26 Nov '05

Thanks for that. I'll remember for future use. Unfortunately nothing to do with the dispatcher or lcr modules or anything to do with failover or redundancy. That would have been extremely helpful. Doug. -----Original Message----- From: JF [mailto:jfkavaka@gmail.com] Sent: Sat 11/26/2005 3:03 AM To: Douglas Garstang Cc: users(a)openser.org Subject: Re: [Users] openser.cfg Samples Hi, Check http://www.onsip.org There's a resource called "All Config FIles for Getting Started" which I found useful. JF On 11/26/05, Douglas Garstang <dgarstang(a)oneeighty.com> wrote: > Does anyone know where I could find some openser.cfg sample files? Been looking and there's absolutely squat available. (hint hint). This would be a very very useful resource... > > Thanks, > Doug. > > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users > > >

1 0

[Serusers] LCR question
by Stefan Prelle 26 Nov '05

26 Nov '05

Hi all, I'm testing the LCR module and I am having problems with its performance. In my setup I use a call generator (sipp) to place 50 calls, 10 calls each second - which works like a charm without any retransmissions when NOT using LCR functionality (no load_gws()). As soon as I add this code in my route_block if (!load_gws()) { sl_send_reply("500", "Server Internal Error - Cannot load gateways"); return; }; I am having huge performance problems. The OpenSER drops to effectivly 1 CPS. My lcr table contains only 20 entries and I have just 2 gateways configured, so this shouldn't be a problem. I guess I made a big mistake somewhere, since this can't be the intended behaviour of the LCR module. Can somebody help me? Regards, Stefan

4 5

Re: [Serusers] Re: NAT again
by Atle Samuelsen 26 Nov '05

26 Nov '05

To be honist, I have'nt looked at your problem that much. but, if your setup is ser -> asterisk and you want to do all nat triversal at ser, it's possible. just make a simple ser.config with only something like : if(src_ip=="asterisk_ip"){ rewritehost("asterisk"); }else{ t_relay(); }; * harry gaillac <gaillacharry(a)yahoo.fr> [051126 13:47]: > However I need help to fix my problems ! > A few people have sent me some help. > > Do you understand the problems in my posts ? > > Harry > > --- Atle Samuelsen <clona(a)cyberhouse.no> a ?crit : > > > goood, > > > > Then you have learnt, never send more then one copy > > of a mail, and never > > send email "Place answer me for fuck's sake" or > > something simular. > > > > - Atle > > > > * harry gaillac <gaillacharry(a)yahoo.fr> [051126 > > 11:04]: > > > I agree you > > > excuse me for sent and resent the same question I > > just > > > expected more some help . > > > I say help not someone who would do what i wish. > > > > > > Harry > > > --- Atle Samuelsen <clona(a)cyberhouse.no> a ?crit : > > > > > > > Okey, the reason why I asked, is that I see you > > have > > > > started sending > > > > more then one copy of the same mail to the > > mailig > > > > list.. again.. > > > > > > > > i tought you had understood that it's not smart, > > and > > > > that people get > > > > pissed when you do that. > > > > > > > > - Atle > > > > > > > > * harry gaillac <gaillacharry(a)yahoo.fr> [051126 > > > > 00:33]: > > > > > Dear Atle, > > > > > I'm not too old I'm just so tired of being > > > > unemployed. > > > > > Harry > > > > > > > > > > --- Atle Samuelsen <clona(a)cyberhouse.no> a > > ?crit : > > > > > > > > > > > Hi Harry, > > > > > > > > > > > > Sorry to ask, How old are you ? > > > > > > > > > > > > -Atle > > > > > > > > > > > > * Doug Meredith <doug.meredith(a)skyridge.com> > > > > [051124 > > > > > > 19:25]: > > > > > > > bosinclar(a)laposte.net wrote: > > > > > > > > > > > > > > >I need to add some functions in my > > ser.cfg > > > > for > > > > > > nat > > > > > > > >support. > > > > > > > >I use my open(ser) as outbound proxy with > > two > > > > > > > >interfaces ppp0 and eth0. > > > > > > > >sip agents send requests to eth0. > > > > > > > >I want my packets passing through the > > > > register > > > > > > and > > > > > > > >invite blocks by fixing contact with a > > public > > > > ip. > > > > > > > > > > > > > > > >All packets from private network must be > > sent > > > > to > > > > > > eth0. > > > > > > > > > > > > > > > >Any suggestions > > > > > > > > > > > > > > > >Bob > > > > > > > > > > > > > > Looks like Harry got a new e-mail account > > to > > > > avoid > > > > > > the moderation. > > > > > > > > > > > > > > Doug > > > > > > > -- > > > > > > > Doug Meredith > > (doug.meredith(a)systemguard.com) > > > > > > > SystemGuard - Oracle remote support > > > > > > > 877-974-8273 (87-SYSGUARD) > > > > > > > 506-854-7997 > > > > > > > www.systemguard.com > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > Serusers mailing list > > > > > > > serusers(a)lists.iptel.org > > > > > > > > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > Serusers mailing list > > > > > > serusers(a)lists.iptel.org > > > > > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ___________________________________________________________________________ > > > > > > > > > Appel audio GRATUIT partout dans le monde avec > > le > > > > nouveau Yahoo! Messenger > > > > > T?l?chargez cette version sur > > > > http://fr.messenger.yahoo.com > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ___________________________________________________________________________ > > > > > Appel audio GRATUIT partout dans le monde avec le > > nouveau Yahoo! Messenger > > > T?l?chargez cette version sur > > http://fr.messenger.yahoo.com > > > > > > > > > > > > > ___________________________________________________________________________ > Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger > T?l?chargez cette version sur http://fr.messenger.yahoo.com >

2 1

[Users] error in nathelper module
by harry gaillac 26 Nov '05

26 Nov '05

Hello, I read nathelper documentation for fix_nated_contact() function. We can read:" Rewrites Contact HF to contain request's source address:port." However when I use this function for nated agents it's not the contact field in sip hf but the connection information in sdp which is rewritten. Could check what i say ? Harry ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

1 0

[Users] detecting re-INVITEs and corresponding replies
by JF 26 Nov '05

26 Nov '05

Hi all, For detection of a re-INVITE request from the script is it sufficient to detect the presence of a to tag using has_to_tag() function? Eg: if (method=="INVITE" && has_to_tag()) { ... }; What about detecting a reply to a re-INVITE in an onreply_route ? Is it doable from the script? How? Thanks in advance for your help. JF

2 1

← Newer
1
...
9
10
11
12
13
14
15
...
58
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users November 2005