Hi!
On my box there is installed:
libmysqlclient10 3.23.56-3 LGPL-licensed
libmysqlclient10-dev 3.23.56-3 LGPL-licensed
libmysqlclient12 4.0.24-10 mysql database
libmysqlclient14 4.1.11a-4sarge1 mysql database
and:
/usr/lib/libmysqlclient.so -> libmysqlclient.so.10
Thus, I suggest the mysql module is linked with libmysqlclient10.
I further guess, others have to use the same libmysqlclient version?
Is there a recommende version of libmysqlclient to use ?
regards
klaus
Hello to all,
I have my SER in bridging mode (with two IPs in two non routable
networks), with rtpproxy and nathelper:
rtpproxy -l 10.0.0.135/193.136.2.205
And the clients in the private and public networks can speak each other
with no problems.
But in the calls from the private network to external SERs (for example:
user(a)iptel.org), the speech only passes one way (from my private
IPclient to the user(a)iptel.org)
Can someone tell me what could be the problem?
These are my routing lines:
if (lookup("interno")) {
if (dst_ip == 10.0.0.135){
if (force_rtp_proxy("FAII"))
t_on_reply("1");
}
if (dst_ip == 193.136.2.205){
if (force_rtp_proxy("FAEI"))
t_on_reply("1");
}
} else if (lookup("externo")) {
if (dst_ip == 10.0.0.135){
if (force_rtp_proxy("FAIE"))
t_on_reply("1");
}
if (dst_ip == 193.136.2.205){
if (force_rtp_proxy("FAEE"))
t_on_reply("1");
}
} else {
sl_send_reply("403", "Utilizador nao Encontrado");
break;
};
(....)
Thats my external routing section:
if( !uri=~"@fccn.pt"){
if (!method=="REGISTER")
# internal IPs must use RTP proxy to call user(a)iptel.org
if (dst_ip == 10.0.0.135){
if (force_rtp_proxy("FAIE"))
t_on_reply("1");
route(1);
break;
}
record_route();
t_on_reply("3");
t_relay();
break;
}
(....)
onreply_route[1] {
if (!(status=~"183" || status=~"200"))
break;
force_rtp_proxy("FA");
}
Hi,
How can I avoid multiple logins using the same username? I want
to secure the users so that only the authentic user can only log on? Is
there any modules or commands to make this? For example user1 is logged
I don't want other people to log also using user1 since user1 is
currently logged on.
Thanks in advance,
--
Ryan Pagquil
Infodyne Inc. - PhilOnline.com
3603 Antel Global Corporate Center
Doña Julia Vargas Ave.
Ortigas Center Pasig City
Tel: 687-0715
Web: www.philonline.com
Hello,
I try to summarize basic steps for generating the RPMs (exemplified for
RedHat). The RPM experts can update/correct these guidelines.
a) an archive with the sources will be available for download
(openser-1.0.0_src.tar.gz) once everything is prepared
b) download it in /usr/src/redhat/SOURCES
c) copy the spec file that is designed for your distribution in same
folder (for RedHats is better to try first openser.spec.fedora) as
openser.spec
d) edit openser.spec as follows:
** Release: must be set to a string that identifies the distro (e.g.,
for fedora core 3.0, it should be "Release: fc3.0")
** update the packager name and address to yours
** comment the packages that you cannot generate (e.g., jabber, radius)
- there are several sections for each package, which can be easily
identified by the name of the package -- you have to comment the whole
section
e) copy the init file (either openser.init or openser.init.SuSE, from
sip-server/packaging/rpm) in /usr/src/redhat/SOURCES
f) cd /usr/src/redhat/SOURCES
g) rpmbuild -ba openser.spec
For SuSE there might be some small differences, but basically is the
same process. These guidelines are for those to have root access. If
not, then you have to follow first
http://dag.wieers.com/howto/bits/rpm-build-user.php (more help via
google searching after "building rpm as user").
If everything goes fine, you should get at the end something like (e.g.,
I built openser base and mysql package):
Wrote: /usr/src/redhat/SRPMS/openser-1.0.0-rhel3.0.src.rpm
Wrote: /usr/src/redhat/RPMS/i386/openser-1.0.0-rhel3.0.i386.rpm
Wrote: /usr/src/redhat/RPMS/i386/openser-mysql-1.0.0-rhel3.0.i386.rpm
These are the files we need. If possible, please make them available on
a ftp or http site and send me the address to take them. I will notify
you back onces I got them, to remove them from your location, if you wish.
Otherwise, I will accept attachments to email (at this address), but let
me know first that you are going to send them, to be prepared :-)
Cheers,
Daniel
Hi,
How does User agents sends log-off signal to SER? I know that for
the user agent to log in it needs to send a REGISTER request, what
request should the user agent need to send SER to be able to log off and
be removed from the location table? Could you please explain how the
user agent does this...
Thanks in advance,
--
Ryan Pagquil
Infodyne Inc. - PhilOnline.com
3603 Antel Global Corporate Center
Doña Julia Vargas Ave.
Ortigas Center Pasig City
Tel: 687-0715
Web: www.philonline.com
We are trying to get inbound DID's working on our SER box. Outbound is working perfectly as we are doing pre-paid.
I ran this command
[root@voip1 ~]# serctl alias add 6049094251 sip:5002@216.x.xxx.xx
domain unknown: use usernames with domain or set default domain in SIP_DOMAIN
[root@voip1 ~]#
I get the same result if I put our domain in place of the IP address. We had someone else set this box up for us and I am having problems reaching them.
5002 is is the username of my test ATA logged into the system I can make outgoing calls to the PSTN
What am I doing wrong?? I have been reading Archives allday trying to grasp this. The DID provider is directing that DID at the IP of this SER box
Eric Haskins
Lead Software Developer
eric(a)v1010.com
Yes, I know about it. I can see the active sessions from the session.py. But do not know how to end the seesion, if there is no rtp session and the bye has not come. My session con troller does not check the rtp session because the media is proxied at SER. As I know, may be I am wrong, the ser is managing the media proxy. Ser says to media proxy to start when a call is proxied, and end when the call is finished.
Do you suggest a SBC that can do this function..?
Thanks,
Best Regards,
________________________________
From: Greger V. Teigre [mailto:greger@teigre.com]
Sent: Thursday, October 27, 2005 9:20 AM
To: Hakan YASTI; serusers(a)lists.iptel.org; ritesh.j(a)net4.in
Subject: Re: [Serusers] end the session if no media
session.py will show if the session is active. Also when a call is put on hold, there will be no rtp stream. I don't know if your SBC handles that.
Or is your question something else?
g-)
----- Original Message -----
From: Hakan YASTI <mailto:hakan.yasti@teletek.net>
To: Greger V. Teigre <mailto:greger@teigre.com> ; serusers(a)lists.iptel.org ; ritesh.j(a)net4.in
Sent: Wednesday, October 26, 2005 09:18 AM
Subject: RE: [Serusers] end the session if no media
Hi Teigre,
Thanks for your reply and kind suggestions. In fact, I am using a session controller for sip calls. And it alerts me via email when a sessiıon is reached for about 60 minutes. At that time,
I check it manually and kil the session if the session is abondened. By sending BYE messages to both legs. From the PSTN side I get the reply what I assume ( 200 OK ) but from the sip side I get No transaction exist.
Because the session was ended before and session controller couldn’t get the BYE message for some reasons. ( Network failure or something else ).
What I am looking for that, from the media proxy, I see the active rtp session when I use media proxy for the calls. And I assume that, when the call has finished and couldn’t send or get BYE message, there will be no rtp stream going on. May be I am wrong for this. If rtp session is still open when the a side hunp up and couldn’t send bye , there is nothing to do except killing the session with sending bye messages to both sides, because there is no way to understand the call is active or not.
Best Regards,
Hakan
________________________________
From: Greger V. Teigre [mailto:greger@teigre.com]
Sent: Wednesday, October 26, 2005 10:00 AM
To: Hakan YASTI; serusers(a)lists.iptel.org; ritesh.j(a)net4.in
Subject: Re: [Serusers] end the session if no media
Hakan and Ritesh,
It seems to me that you are both asking about the same thing. This topic has been discussed many times on serusers. Search google (site:mail.iptel.org) for "BYE stateful sipsak", I'm pretty sure you will get some info.
Also, this FAQ could help:
http://www.onsip.org/modules/xoopsfaq/index.php?cat_id=3#q2
g-)
----- Original Message -----
From: Hakan YASTI <mailto:hyasti@teletek.net>
To: serusers(a)lists.iptel.org
Sent: Thursday, October 13, 2005 09:13 AM
Subject: [Serusers] end the session if no media
Hi,
I wonder, is there any way, to end the session when the media has ended. Sometimes, we have problem at BYE message. For some reasons, the bye is not coming and may be it is coming wrong.
At that time, the media is ended but the call is seen as active.
I am using ser and using media proxy.
Any suggestion for this issue ?
Best Regards,
Hakan YASTI
NGN Engineer
Teletek Telekomünikasyon Hizmetleri A.Þ.
Ayazma Dere Cad. Akþit Plaza No:12
Fulya, Beþiktaþ ISTANBUL - TURKEY
Tel : +90 212 310 22 34
Fax : +90 212 227 8700
GSM : +90 533 669 06 84
E-mail: hakan.yasti(a)teletek.net <mailto:hakan.yasti@teletek.net>
http://www.teletek.net
________________________________
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Disclaimer:
This e-mail (including any attachments) may contain confidential and/or privileged information. Copying, disclosure or distribution of the material in this e-mail without our companys' authority is strictly forbidden. If you are not the intended recipient (or have received this e-mail in error), please notify the sender and delete it from your system immediately. Our Company makes no warranty as to the accuracy or completeness of any information contained in this message and hereby excludes any liability of any kind for the information contained therein or for the information transmission, reception, storage or use of such in any way whatsoever. Any opinions expressed in this message are those of the author and may not necessarily reflect the opinions of Our Company.
Yasal Uyarı:
Bu e-posta'nin içerdigi bilgiler (ekleri de dahil olmak üzere) gizlidir. Şirketimizin onayı olmaksızın içeriği kopyalanamaz, üçüncü kişilere açıklanamaz veya iletilemez . Bu mesajın gönderilmek istendiği kişi değilseniz (ya da bu e-posta’yı yanlışlıkla aldıysanız), lütfen yollayan kişiyi haberdar ediniz ve mesajı sisteminizden derhal siliniz. Şirketimiz bu mesajın içerdigi bilgilerin doğruluğu veya eksiksiz olduğu konusunda bir garanti vermemektedir. Bu nedenle bilgilerin ne şekilde olursa olsun içeriğinden, iletilmesinden, alınmasından, saklanmasından sorumlu değildir. Bu mesajın içeriği yazarına ait olup, Şirketimizin görüşlerini içermeyebilir.
Disclaimer:
This e-mail (including any attachments) may contain confidential and/or privileged information. Copying, disclosure or distribution of the material in this e-mail without our companys' authority is strictly forbidden. If you are not the intended recipient (or have received this e-mail in error), please notify the sender and delete it from your system immediately. Our Company makes no warranty as to the accuracy or completeness of any information contained in this message and hereby excludes any liability of any kind for the information contained therein or for the information transmission, reception, storage or use of such in any way whatsoever. Any opinions expressed in this message are those of the author and may not necessarily reflect the opinions of Our Company.
Yasal Uyarı:
Bu e-posta'nin içerdigi bilgiler (ekleri de dahil olmak üzere) gizlidir. Şirketimizin onayı olmaksızın içeriği kopyalanamaz, üçüncü kişilere açıklanamaz veya iletilemez . Bu mesajın gönderilmek istendiği kişi değilseniz (ya da bu e-posta’yı yanlışlıkla aldıysanız), lütfen yollayan kişiyi haberdar ediniz ve mesajı sisteminizden derhal siliniz. Şirketimiz bu mesajın içerdigi bilgilerin doğruluğu veya eksiksiz olduğu konusunda bir garanti vermemektedir. Bu nedenle bilgilerin ne şekilde olursa olsun içeriğinden, iletilmesinden, alınmasından, saklanmasından sorumlu değildir. Bu mesajın içeriği yazarına ait olup, Şirketimizin görüşlerini içermeyebilir.
Hi Guys And Girls,
Fellow Serusers, Greger and Me where thinking of trying to join the
norwegian troops at Beer Palace on Aker Brygge at 5pm, Upcoming Wednesday.
Anybody Intrested in Joining for a Beer or 5?
Best Regards
Atle
Dear sir,
Please remove me from the list of the emails. Iam getting hundredsof emails and the mail folder is getting bulk.
Kindly do it ASAP.
Regards
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
