sr-users October 2005

sr-users@lists.kamailio.org

214 participants
457 discussions

by tcchan

Hello, Does anybody know the status of iptel AA module? If you go to the web site www.iptel.org/aa/, you can see that the product is available under iptel's commercial license and the contact is info(a)iptel.org. Problems is I tried twice to contact them and there is no response. What happen? Regards, TC Chan

18 years, 8 months

[Serusers] no login to openser

by Ronald Wiplinger

(It is my first try, .... I am sure I make something wrong) I have installed openser and it is now running for a while, ... today I have added two users by: export SIP_DOMAIN=voip.mydomain.com openserctl add 800000 secret0 me(a)mydomain.com openserctl add 800001 secret1 me(a)mydomain.com first test: openserctl ul show Dumping all contacts may take long: are you sure you want to proceed? [Y|N] y ===Domain list=== ---Domain--- name : 'aliases' size : 512 table: 0x2a96f6d120 d_ll { n : 0 first: (nil) last : (nil) } ---/Domain--- ---Domain--- name : 'location' size : 512 table: 0x2a96f68f38 d_ll { n : 1 first: 0x2a96f71180 last : 0x2a96f71180 } ...Record(0x2a96f71180)... domain: 'location' aor : 'admin' ~~~Contact(0x2a96f71298)~~~ domain : 'location' aor : 'admin' Contact : 'sip:601@vpbx.elmit.com' Expires : Permanent q : 1 Call-ID : 'The-Answer-To-The-Ultimate-Question-Of-Life-Universe-And-Everything' CSeq : 42 User-Agent: 'SIP Express Router FIFO' received : '' State : CS_SYNC Flags : 128 Sock : none (null) next : (nil) prev : (nil) ~~~/Contact~~~~ .../Record... ---/Domain--- ===/Domain list=== Here it says domain: 'location' that sounds for me not correct, shouldn't it be voip.mydomain.com ?? I use than a hard phone and set it up, but it cannot log on, ... I also do not see anything happen, when I use openserctl moni What have I done wrong? BTW, I checked with serweb, and the user 800000 can login! bye Ronald Wiplinger

18 years, 8 months

[Serusers] Caller ID revisited....

by sip

So... I've scoured the archives and can't find quite the answer I'm looking for. I'd like to do caller ID in such a way that the 'Display Name' or, in sip terms, comment portion of the From header, isn't displayed for ALL users (or is displayed in a particular format for ALL users). I know I can use UAC to rewrite a particular From tag in a particular way, but I haven't figured out how to make those changes heuristically global. For instance, I'd like a way to say that if the From tag looked like: From: "Jimmy the Fish" <sip:11231234567@sip.domain.com>;tag=3905520531 I'd like to rewrite it to be either: From: <sip:11231234567@sip.domain.com>;tag=3905520531 OR From: "1-123-123-4567" <sip:11231234567@sip.domain.com>;tag=3905520531 Or some such. I'd like to have heuristic control, in that I'd rather not have to have a UAC rewrite entry for each number. If it has to be done via a db query, fine, but I don't get how to do that, either. Any ideas? N.

18 years, 8 months

Re: [Serusers] save("location") causing routing errors?

by Patrick Jordan-Smith

On Sun, 2005-10-16 at 17:57 -0400, sip wrote: > That should be couched in an if(method=="REGISTER") block. > > > In such a way, it would never GET an INVITE > Yes, but then how do we handle a situation where the server has fallen over (happens sometimes) and then come back up, we check them but until the UA sends another REGISTER we don't know where they are and can't get incoming calls to that UA. Maybe I can force the re-register period to be really small (5 seconds?) Thanks for your help, Patrick -- Patrick Jordan-Smith Mercury Telecommunications Ltd voice +64-9-916-0300 paper +64-9-916-0301

18 years, 8 months

[Serusers] onsip feature fwd script with asterisk voicemail

by Aisling

Hi, I was wondering if anyone has asterisk voicemail working with the default onsip feature forwarding script?...If so would it be possible to post the relevant snippets? Many thanks. Aisling. -------------------Legal Disclaimer--------------------------------------- The above electronic mail transmission is confidential and intended only for the person to whom it is addressed. Its contents may be protected by legal and/or professional privilege. Should it be received by you in error please contact the sender at the above quoted email address. Any unauthorised form of reproduction of this message is strictly prohibited. The Institute does not guarantee the security of any information electronically transmitted and is not liable if the information contained in this communication is not a proper and complete record of the message as transmitted by the sender nor for any delay in its receipt.

18 years, 8 months

Re: [Users] Openser as non root

by Tavis P

I'm currently running OpenSER both as non root and also chrooted without issue Nelson Silva wrote: > Anyone got a info how to make openser for non root ? > > for example, openser -U openser -G openser ? > > > > thk > > Nelson Silva > ----------------- > email: nelson.silva(a)neuvex.com > website: http://www.neuvex.com > > >------------------------------------------------------------------------ > >_______________________________________________ >Users mailing list >Users(a)openser.org >http://openser.org/cgi-bin/mailman/listinfo/users > >

18 years, 8 months

[Users] Openser as non root

by Nelson Silva

18 years, 8 months

[Users] monitor ser

by Richard Z

Hi, I'd like to use monit to monitor ser. Sometime ser has the pid file, but stops responding to any request. I want to periodically send an OPTIONS message to the udp port 5060 and expects the answer back. However can't make it work with monit. The config is something like this, check process program with pidfile /var/run/ser.pid start program = "/etc/init.d/rc.serstart" stop program = "/etc/init.d/rc.serstop" if failed port 5060 type udp send "OPTIONS sip:test@........" expect "SIP/2.0 200 OK" with timeout 2 seconds then alert I can see the reply with ngrep. But monit still reports "connection failed". Any suggestion? Thanks, Richard

18 years, 8 months

[Serusers] sending data via message

by Ángel Gómez

Is posible to send data using the MESSAGE pirmitive? Can i use the content-tipe to set oter content types in the MESSAGE? I need to send data throug a SIP server, not opening a new conexion. Can any one help me?

18 years, 8 months

[Users] how set timeout when connection is terminate (send BYE command)

by Michal Prorok

Hello, How can I set timeout for BYE command when connection will be terminated (reset computer eg.). In acc table is only INVITE+ACK, but not BYE command. Failure route is: failure_route[1] { if (t_check_status("487")) { break; }; if (isflagset(26) && t_check_status("486")) { if (avp_pushto("$ruri", "s:fwdbusy")) { avp_delete("s:fwdbusy"); resetflag(26); route(6); break; }; }; if (isflagset(27) && t_check_status("408")) { if (avp_pushto("$ruri", "s:fwdnoanswer")) { avp_delete("s:fwdnoanswer"); resetflag(27); route(6); break; }; }; Regards Michal Prorok

18 years, 8 months

← Newer
1
...
19
20
21
22
23
24
25
...
46
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users October 2005