sr-users October 2005

sr-users@lists.kamailio.org

214 participants
457 discussions

[Serusers] HELP:could NOT account BYE/CANCEL messages with RADIUS

by shikun.wang

Hi,all I've tried to use RADIUS(freeradius-0.9.1) to account with SER(ser-0.9.3).But I can't account BYE or CANCEL messages,while I can account INVITE and ACK. In ser.cfg I write as follows: ... modparam("acc", "log_level", 4) modparam("acc", "radius_flag", 2) modparam("acc", "radius_missed_flag", 3) ... if (method=="INVITE") { log(1, "INVITE\n"); if (!radius_proxy_authorize("")) { proxy_challenge("", "0"); setflag(3); break; }; setflag(2); }; if (method=="BYE" || method=="CANCEL") { log (1, "BYE or CANCEL\n");\ setflag(2); }; ... What's wrong with it?Is there anything I miss to configure? Please give me any hint and thanks a lot.

19 years, 1 month

[Users] Commercial support

by Brandon Price

Where does one get commercial level, priority support for openser. We are a voip provider looking towards basing the second revision of our network on openser. I have been able to get most things working but some applications like using serial forking for call hunt, a custom cnam module, and getting some modules (avpops, and uac_redirect) to perform as documented are beyond my experience with the software. We do however have time constraints so I ask simply, where can I get priority per incident support for openser as my e-mails to voice- sistem.ro have been unanswered. Any help is greatly appreciated. Also congratulations to the developers on the 1.0 release you are the guys that give guys like me hope. Thank you very much for openser, I hope I get the chance to work with you in the future.

19 years, 1 month

[Serusers] Ser stop responding requests when scanned with SiVuS

by Hoa Thai Duy

Hi all Yesterday, I downloaded and scanned my stable SER system (production), and it stoped responding to Subscriber requests. The Tool is at http://vopsecurity.org/sivus-1.09.exe, remember to have JRE installed on Windows. I deployed the configuration guideline at onsip, OpenSER 0.9.5 Anyone have tested the Security Scanner, pls. help Brgds Hoa

19 years, 1 month

[Serusers] Install problems

by Philip Jones

I have downloaded and untar'd SER on a hosted server. According to install doc's I should be able to use ser start from /etc/rc.d/init.d under Fedora but, nothing. Does anyone have a more detailed install guide? I'm quite new to Linux, sorry. I'm not sure whether I need to build the program either, the guide appears tobe a little vague.

19 years, 1 month

[Serusers] CDRTool auth_user table

by Adrian Georgescu

The archive was incorrect pl download again, I have rebuilt it and now the create_tables.mysql script has all the tables. Adrian

19 years, 1 month

[Users] fix_nated_contact()

by Alexander Ph. Lintenhofer

Hi everybody, Is there a reason why fix_nated_contact() only works for UDP? My problem is that in the case of TCP and tcp-aliases only the port is taken from the via-header. The IP-addr is taken from the source of the packet. This leads to the fact that in case of NAT and TCP no alias-mapping is found.... If I comment the lines in nathelper.c which exclude the use of TCP all works fine - so what is the reason for fix_nated_contact() to be only processed with UDP? Any reasons for this? regards, Philipp

19 years, 1 month

[Serusers] CDRTool auth_user table

by Josh Horton

Can someone send me the structure of the auth_user table for CDRTool. I just downloaded CDRTool-3.3.5 and followed the install instructions. When I run "./setup_mysql.sh password localhost" I get the following error: ERROR 1146 (42S02) at line 1: Table 'cdrtool.auth_user' doesn't exist Thanks, Josh I can not find a single reference to a table creation in any files. see below: [root@localhost CDRTool]# pwd /var/www/CDRTool [root@localhost CDRTool]# grep -R auth_user * accounts_lib.phtml: $query="select * from auth_user"; accounts.phtml: $query="delete from auth_user"; accounts.phtml: $query="update auth_user set accounts.phtml: $query="select * from auth_user"; accounts.phtml: $query="insert into auth_user log.phtml: $query="select * from auth_user where perms like '%admin%'"; phplib/local.inc: var $database_table = "auth_user"; phplib/local.inc: $this->db->query("select * from auth_user where phplib/local.inc: $update="update auth_user setup/mysql/alter_tables.mysql:alter table auth_user change column only_customer domainFilter varchar(255) not null; setup/mysql/alter_tables.mysql:alter table auth_user change column only_cscode codeFilter varchar(255) not null; setup/mysql/alter_tables.mysql:alter table auth_user change column only_cli aNumberFilter varchar(255) not null; setup/mysql/alter_tables.mysql:alter table auth_user change column only_after_date afterDateFilter varchar(255) not null; setup/mysql/alter_tables.mysql:alter table auth_user drop column only_cardservice; setup/mysql/alter_tables.mysql:alter table auth_user drop column only_cardclass; setup/mysql/alter_tables.mysql:alter table auth_user change column display_card compidFilter varchar(255) not null; setup/mysql/alter_tables.mysql:alter table auth_user add column serviceFilter varchar(255) not null after codeFilter; setup/mysql/alter_tables.mysql:alter table auth_user change column codeFilter cscodeFilter varchar(255) not null; setup/mysql/create_data.mysql:INSERT INTO auth_user VALUES ('c14cbf141ab1b7cd009356f555b607dc','admin','admin','admin,callsearch,statis tics,sqlquery','2099-01-02','AG Projects','Administrator','+31208005160','support(a)1example.com','1','','','' ,'','','','','ser_radius,cisco,asterisk,ser_acc,ser_missed_calls','0','','20 10-07-11 04:48:00','xj28k'); SOAP/server_lib.php: $query="select * from auth_user

19 years, 1 month

[Serusers] scope of flags ?

by Ramin Nikaeen

Valued Colleagues, Can anyone tell me what is scope of the "flags" used in ser.cfg? When I do a "setflag(3)", is it valid throughout a : - Transaction? - Dialogue? - Call? I do a "setflag(3)" when I receive an INVITE and expect the flag 3 to be set when I receive the associated BYE. However, when I do an "isflagset(3)" when I receive the BYE, the flag is not set?! Can someone tell me why?! Thanks ramin

19 years, 1 month

[Serusers] How to avoid calling route() in a failure_route block?

by Tim Klein

I have an unusual need: If a contact in the usrloc database is unreachable for any reason, I must immediately delete it from the usrloc database. I know how to do the deletion, but I don't know the right way to write my configuration script. Below is the script that I want to write. But I think it won't work, because I think it's illegal for a failure_route block to call a route() command. (Am I correct about that?) Can anyone tell me what I should do instead of the following? Thank you in advance! Tim ============== route { [...irrelevant stuff omitted...] if (method==INVITE) { route(1); } } route[1] { if (lookup("location")) { t_on_failure("99"); t_relay(); } else { t_reply("404","Not Found"); } } failure_route[99] { delete_location_from_usrloc(); # I will write this function. route(1); } ==============

19 years, 1 month

RE: [Serusers] Serweb not displaying calls

by John, Paul

I followed the instructions, still can't get calls logged by the acc. Here is my ser.cfg. What am I doing wrong? Do I need to use db parameters in acc module? I get "not found" when I try to use these. ------------------------------------------------------------ [root@localhost ser]# ser -E 0(11826) set_mod_param_regex: parameter <db_url> not found in module <acc> 0(11826) parse error (82,58-59): Can't set module parameter 0(11826) set_mod_param_regex: parameter <db_missed_flag> not found in module <acc> 0(11826) parse error (83,36-37): Can't set module parameter 0(11826) set_mod_param_regex: parameter <db_flag> not found in module <acc> 0(11826) parse error (84,29-30): Can't set module parameter ERROR: bad config file (3 errors) ------------------------------------------------------------- Ser.cfg file ------------------------------------------------------------ # # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=4 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" fifo_mode=0666 alias="10.100.1.79" alias="sip.ipc.com" sip_warning=yes listen="10.100.1.79" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/fork.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/root/usr/local/lib/ser/modules/acc.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("acc", "log_fmt", "fimos") modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 2) modparam("acc", "report_ack", 0) modparam("acc", "failed_transactions", 1) modparam("acc", "early_media", 1) modparam("acc", "db_url", "sql://ser:heslo@localhost/ser") modparam("acc", "db_missed_flag", 2) modparam("acc", "db_flag", 1) modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("usrloc", "db_mode", 2) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; }; if (method =="INVITE"){ log(1, "INVITE MESSAGE RECEIVED-START ACCOUNTING\n"); setflag(1); }; if (method=="BYE" || method=="CANCEL"){ log(1, "STOP ACCOUNTING\n"); setflag(1); } if (uri=~"^sip:90[0-9][0-9]@") { rewritehost("ns.sip.ipc.com"); forward(uri:host,uri:port); break; } if (uri=~"^sip:95[0-9][0-9]@") { if (method=="REGISTER") { sl_send_reply("488", "Not Acceptable Here"); break; } if (!fork_dset( )) { sl_send_reply("404", "Not Found"); } else { if (!t_relay( )) { sl_reply_error( ); } } break; } # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # }; save("location"); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; } Paul

19 years, 1 month

← Newer
1
...
10
11
12
13
14
15
16
...
46
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users October 2005