sr-users January 2005

sr-users@lists.kamailio.org

199 participants
399 discussions

by Gustavo Villegas

Users the nat in Ser is managed by the SIP message, i was wondering if is theer a solution for managing the NAT in RTP protocol as the RTP is a trasport layer protocol All the best Gustavo Villegas

19 years, 4 months

[Serusers] RTPPROXY problem

by Alejandro Mendoza

Hi everybody, Im trying to compile rtpproxy in SOLARIS 9(SPARC), but Im getting errors related to sys/cdefs.h and err.h, i have readen many articles about it, but there is nothing helpful. If anybody can help me, Ill thank it. Atentamente! Alejandro Mendoza Ing. de Soporte EPSSILON, Guatemala Tel: (502) 22560068 Móvil: (502) 57193432

19 years, 4 months

RE: [Serusers] Problem with ACK on Negative Reply

by Wearne, David W.

I ran into exactly the same problem in December. There are several reasons why SER may not realize the ACK belongs to the transaction. Look carefully at the via: and from: headers in the INVITE and the ACK. The via: should have a branch parameter, and it should be the same in both. Some UAs do not put in the branch parameter. In this case SER should (according to RFC3261) be looking at the combination of the Request URI, To tag, From tag, Call-ID, Cseq, and top via header. In my case the problem was that SER compares the From field rather than the >From tag, and it does so incorrectly. I raised this issue both here and in the serdev list, (you can find the thread in the December archives), but the developers said they would not fix this because it is in support of an obsolete spec (RFC 2543). I recommend you check those headers to see if your situation actually matches what I ran into, and if so, raise the issue to the serdev list. If enough people complain, they might decide to provide better support of RFC3261, section 17.2.3 (Matching Requests to Server Transactions). Dave _____ From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of PHAN, Quang-Minh (Docteur Ordinateur) Sent: Thursday, January 06, 2005 12:10 PM To: serusers(a)lists.iptel.org Subject: [Serusers] Problem with ACK on Negative Reply Hi all, When I use SER in transaction stateful mode, I have the following problem: When A sends an "INVITE B" to SER, SER forwards the INVITE to B statefully. If B reply with "200 OK", everything goes fine as SER will delete the transaction from memory when it sees the 200 OK. However, if B send an "BUSY HERE" back to SER, SER will send an ACK to B right away and then forwards the "BUSY HERE" to A. A will then send an ACK to SER but SER won't realize that the ACK belong to the transaction and forward it to B. SER will then keep sending "BUSY HERE" to A until the transaction is timed out. I wonder if there is something to add in the configuration file to make SER understand that the ACK send from A should terminate the transaction. Any help will be highly appreciated! Minh

19 years, 4 months

Re: [Serusers] Problem with ACK on Negative Reply

by Jiri Kuthan

At 07:09 PM 1/6/2005, PHAN, Quang-Minh (Docteur Ordinateur) wrote: >Hi all, > > When I use SER in transaction stateful mode, I have the following problem: > > When A sends an "INVITE B" to SER, SER forwards the INVITE to B statefully. If B reply with "200 OK", everything goes fine as SER will delete the transaction from memory when it sees the 200 OK. However, if B send an "BUSY HERE" back to SER, SER will send an ACK to B right away and then forwards the "BUSY HERE" to A. A will then send an ACK to SER but SER won't realize that the ACK belong to the transaction and forward it to B. It will. you need to make sure that the ACK hits t_relay, which will consume it. -jiri > SER will then keep sending "BUSY HERE" to A until the transaction is timed out. > > I wonder if there is something to add in the configuration file to make SER understand that the ACK send from A should terminate the transaction. > >Any help will be highly appreciated! > >Minh >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

19 years, 4 months

[Serusers] Problem with ACK on Negative Reply

by PHAN, Quang-Minh (Docteur Ordinateur)

Hi all, When I use SER in transaction stateful mode, I have the following problem: When A sends an "INVITE B" to SER, SER forwards the INVITE to B statefully. If B reply with "200 OK", everything goes fine as SER will delete the transaction from memory when it sees the 200 OK. However, if B send an "BUSY HERE" back to SER, SER will send an ACK to B right away and then forwards the "BUSY HERE" to A. A will then send an ACK to SER but SER won't realize that the ACK belong to the transaction and forward it to B. SER will then keep sending "BUSY HERE" to A until the transaction is timed out. I wonder if there is something to add in the configuration file to make SER understand that the ACK send from A should terminate the transaction. Any help will be highly appreciated! Minh

19 years, 4 months

[Serusers] IPv6

by Kuniyoshi Murata

Hi, I'm running SER on dual stack (IPv4 & IPv6) linux box and SER is listening on both IPv4 and IPv6 ports. Now I want to try SER's connectivity on IPv6 and seeking IPv6 SIP phone (softphone). Does anyone know IPv6 compatible softphone? (preferably free stuff) -- Kuniyoshi Murata.........................iChat/AIM:macwebcaster English-Japanese Interpreter mailto:kuni@ej-interpreter.net Macintosh Webcast Specialist http://www.macwebcaster.com

19 years, 4 months

[Serusers] Using SER to bypass port-5060 filter

by Miguel Cruz

My ISP, which holds both the broadband and landline telephony monopolies in this area, blocks port 5060. Also, I am behind NAT (at this location; my router has a real address). I am hoping it would be possible to set up a proxy at a 3rd location to make it possible to use the Broadvoice service. I am able to use FWD for incoming and outgoing without trouble, so I don't think there are any other obstacles. I tried setting up my 3rd-location server to simply reflect packets that hit it on UDP port 7000, so they went to Broadvoice's server on port 5060. Unsurprisingly, I suppose, that didn't work. Tcpdump showed that nothing ever came back along that route; I am not sure whether Broadvoice's server was sending replies anywhere, but they sure weren't making it to my intermediate reflecting machine. So I guess there needs to be some rewriting going on. It seems like SER may be the tool for this, but after looking through many example configurations, I was unable to find something as simple as what I'm after. Does anyone have any ideas about a good place for me to start? Is SER in fact an appropriate tool for this task? Thanks. miguel

19 years, 4 months

RE: [Serusers] REGISTER

by Ricardo Martinez

This is taken from a older answer from me. Hello. As far as i know there is a new command called max_contacts(number), where "number" is the maximun number of contacts that is possible to register for a single user. Unfortunately, this command is available only in the new 0.9 version. I tested it and it seems to do the trick ok. Cheers Ricardo Martinez -----Mensaje original----- De: Martin Bangiev [mailto:martin.bangiev@borsabg.com] Enviado el: Jueves, 06 de Enero de 2005 10:31 Para: serusers(a)lists.iptel.org Asunto: [Serusers] REGISTER Hello people, I'm trying to forbid the SIP clients to have more than one registered contact at a time, but with no success. Does anyone has an idea how can this be done? I want to keep only the last registered location. Thanks in advance Martin _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

19 years, 4 months

[Serusers] REGISTER

by Martin Bangiev

Hello people, I'm trying to forbid the SIP clients to have more than one registered contact at a time, but with no success. Does anyone has an idea how can this be done? I want to keep only the last registered location. Thanks in advance Martin

19 years, 4 months

[Serusers] Looking for a SER consultant in Mtl,QC,CAN

by David Filion

Hello, My company is looking for a SER consultant in Montreal, QC, CAN to assist with implementing a SER/Asterisk solution. This will involve configuration and most likely installation. Please contact me off list if you are or someone you know is interested. Thank you, David Filion Email: dfilion(a)dotality.com

19 years, 4 months

← Newer
1
...
32
33
34
35
36
37
38
39
40
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users January 2005