sr-users September 2004

sr-users@lists.kamailio.org

190 participants
382 discussions

[Serusers] Problem initialazing domain.so module.

by Ricardo Martinez

Hi. I'm trying to start SER with NAT support, by loading the mediaproxy and domain module. I'm using ser 0.8.14 and mediaproxy 1.2.0 I'm getting this ERROR in the debug. 0(15354) DEBUG: init_mod: domain 0(15354) domain - initializing 0(15354) find_export: <db_use_table> not found 0(15354) domain:mod_init(): Unable to bind database module 0(15354) init_mod(): Error while initializing module domain ERROR: error while initializing modules 0(15354) DEBUG: tm_shutdown : start 0(15354) DEBUG: tm_shutdown : empting DELETE list 0(15354) DEBUG: tm_shutdown : empting hash table 0(15354) DEBUG: tm_shutdown: releasing timers 0(15354) DEBUG: tm_shutdown : removing semaphores 0(15354) DEBUG: tm_shutdown : done 0(15354) shm_mem_destroy 0(15354) destroying the shared memory lock I have to say that i'm not using the mysql.so module, all the authentification and accounting is done by RADIUS. Here is part of my ser.cfg. # # $Id: ser.cfg,v 1.21.2.2 2003/10/13 22:53:06 jiri Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=8 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) #Uncomment these lines to enter debugging mode #fork=no #log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "/usr/local//lib/ser/modules/mysql.so" loadmodule "/usr/local//lib/ser/modules/sl.so" loadmodule "/usr/local//lib/ser/modules/tm.so" loadmodule "/usr/local//lib/ser/modules/rr.so" loadmodule "/usr/local//lib/ser/modules/maxfwd.so" loadmodule "/usr/local//lib/ser/modules/usrloc.so" loadmodule "/usr/local//lib/ser/modules/registrar.so" loadmodule "/usr/local//lib/ser/modules/textops.so" # Para trabajar con NAT loadmodule "/usr/local//lib/ser/modules/mediaproxy.so" loadmodule "/usr/local//lib/ser/modules/domain.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" loadmodule "/usr/local/lib/ser/modules/group_radius.so" loadmodule "/usr/local/lib/ser/modules/acc.so" # ----------------- setting module-specific parameters --------------- # ----------------- setting module-specific parameters --------------- # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("acc","log_level",1) modparam("auth_radius","radius_config","/usr/local/etc/radiusclient/radiuscl ient.conf") modparam("auth_radius","service_type",15) modparam("acc","radius_config","/usr/local/etc/radiusclient/radiusclient.con f") modparam("acc", "service_type", 15) modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag", 3) modparam("acc", "failed_transactions", 1) modparam("acc", "report_ack", 0) #group radius modparam("group_radius","radius_config","/usr/local/etc/radiusclient/radiusc lient.conf") modparam("group_radius", "use_domain", 1) #module mediaproxy modparam("mediaproxy", "natping_interval", 60) modparam("registrar", "nat_flag", 6) Any ideas? Hope that someone can help me Ricardo Martinez

19 years, 9 months

[Serusers] ser-mysql accounting: Crashing SER

by Kevin McCauley

I am having a problem with the acc module crashing my SER when it hits the setflag(1) statement. It appears after many hours of debugging, that when I just include the modparam statements in the config file after it relay's the message I get a "child process # exited by a signal 11" . I have recompiled acc for mysql support and installed it. Thanks, -Kevin

19 years, 9 months

RE: [Serusers] ser-mysql accounting: Crashing SER

by Zeus Ng

Try using a different value for db_flag and db_missed_flag and see it helps or not. Zeus > -----Original Message----- > From: Kevin McCauley [mailto:kevin@fullcirclenetworks.net] > Sent: Thursday, 9 September 2004 11:52 PM > To: 'Zeus Ng' > Cc: serusers(a)lists.iptel.org > Subject: RE: [Serusers] ser-mysql accounting: Crashing SER > > > Zeus, > > Here is my ser.cfg. Is not much different than the > distributions. One thing I noticed last night is that if I > leave the setflag(1) in and comment out all the modparam's > for the acc module, it doesn't crash. > > -Kevin > > -----Original Message----- > From: Zeus Ng [mailto:zeus.ng@isquare.com.au] > Sent: Thursday, September 09, 2004 9:18 AM > To: 'Kevin McCauley' > Cc: serusers(a)lists.iptel.org > Subject: RE: [Serusers] ser-mysql accounting: Crashing SER > > Kevin, > > Can you attach your ser.cfg? Can say much without that. > > Zeus > > > -----Original Message----- > > From: serusers-bounces(a)lists.iptel.org > > [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Kevin McCauley > > Sent: Thursday, 9 September 2004 10:13 PM > > To: serusers(a)lists.iptel.org > > Subject: [Serusers] ser-mysql accounting: Crashing SER > > > > > > I am having a problem with the acc module crashing my SER > > when it hits the setflag(1) statement. It appears after many > > hours of debugging, that when I just include the modparam > > statements in the config file after it relay's the message I > > get a "child process # exited by a signal 11" . I have > > recompiled acc for mysql support and installed it. > > > > > > > > Thanks, > > > > > > > > -Kevin > > > > > > > > > >

19 years, 9 months

RE: [Serusers] Please help : how to disable losse routing ???

by RUIZ Nicolas

Thanks for your reply ! When I put strict_route at the place of loose_route, i have an error. (Module missing). Ser version is : 0.8.12. What can i modifie to apply strict routing only? HELP MEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE :0) modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); if (loose_route()) { t_relay(); break; }; /* record-route INVITEs -- all subsequent requests must visit us */ if (method=="INVITE") { record_route(); }; Selon Franz Edler <franz.edler(a)utanet.at>: > From: Nicolas RUIZ Sent: Wednesday, September 08, 2004 6:14 PM > > > I want to disable "loose routing" on IPTEL. > > What can I write in my configuration file to stop loose routing? > > I assume you have to exchange the function "loose_route()"with > "strict_route()" in you ser.cfg. > > > I have disable this line: modparam("rr", "enable_full_lr", 1) but the > > UA(With RFC 3261) use always loose routing. > > Of course, this only modifies the "lr"-parameter in the routing header. > > Franz > > ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

19 years, 9 months

[Serusers] Ser with Radius/Mysql - digest problem?

by Darren Bentley

Hello, I'm using radius for auth with a mysql backend. I'm a little confused about Digest. I've read the radius howto and the mysql guide (http://www.frontios.com/freeradius.html) but it doesn't really explain digest. When I add new users I'm putting them in the mysql table "radcheck". Do I then always have to enter the user in the /etc/raddb/digest file as well? I'm trying to run a basic test. Here's what I have in the digest file: User-Name = "test", Digest-Response = "631d6d73147add2f9e437f59bbc3aeb7", Digest-Realm = "testrealm", User-Password = "test", Digest-Nonce = "test" , Digest-Method = "INVITE", Digest-URI = "sip:5555551212@example.com", Digest-Algorithm = "MD5", Digest-User-Name = "test" "radcheck" table: UserName = test Attribute = Password Value = test "radgroupcheck" table: GroupName = phone Attribute = Auth-Type Value = Digest "usergroup" table: UserName = test GroupName = phone When I run: [root@scratch raddb]# radclient -f digest localhost auth qwerty Received response ID 81, code 3, length = 20 Here's the debug output: rad_recv: Access-Request packet from host 127.0.0.1:38061, id=91, length=154 User-Name = "test" Digest-Response = "631d6d73147add2f9e437f59bbc3aeb7" Digest-Attributes = "\001\013testrealm" User-Password = "test" Digest-Attributes = "\002\006test" Digest-Attributes = "\003\010INVITE" Digest-Attributes = "\004\034sip:5555551212@example.com" Digest-Attributes = "\006\005MD5" Digest-Attributes = "\n\006test" modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "eap" returns noop for request 0 rlm_digest: Converting Digest-Attributes to something sane... Digest-Realm = "testrealm" Digest-Nonce = "test" Digest-Method = "INVITE" Digest-Uri = "sip:5555551212@example.com" Digest-Algorithm = "MD5" Digest-User-Name = "test" rlm_digest: Adding Auth-Type = DIGEST modcall[authorize]: module "digest" returns ok for request 0 radius_xlat: 'test' rlm_sql (sql): sql_set_user escaped user --> 'test' radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'test' ORDER BY id' rlm_sql (sql): Reserving sql socket id: 4 radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'test' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id' radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'test' ORDER BY id' radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = 'test' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id' rlm_sql (sql): Released sql socket id: 4 modcall[authorize]: module "sql" returns ok for request 0 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 users: Matched DEFAULT at 152 modcall[authorize]: module "files" returns ok for request 0 modcall[authorize]: module "mschap" returns noop for request 0 modcall: group authorize returns ok for request 0 rad_check_password: Found Auth-Type DIGEST rad_check_password: Found Auth-Type Digest Warning: Found 2 auth-types on request for user 'test' auth: type "digest" modcall: entering group authenticate for request 0 A1 = test:testrealm:test A2 = INVITE:sip:5555551212@example.com KD = 1e00d6dbd30441265df6064b9d9b7da9:test:675b8c827b388805aa252ea38bfb6804 rlm_digest: FAILED authentication modcall[authenticate]: module "digest" returns reject for request 0 modcall: group authenticate returns reject for request 0 auth: Failed to validate the user. Login incorrect: [test/test] (from client localhost port 0) Delaying request 0 for 1 seconds Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 91 to 127.0.0.1:38061 Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 91 with timestamp 413f842e Nothing to do. Sleeping until we see a request. ------------------------- The username is "test" and the password is "test". I'm stumped. I'm using FreeRadius 0.9.3 / SER 0.8.12 / radiusclient 0.3.2 Any help is appreciated. Thanks, - Darren

19 years, 9 months

Re: [Serusers] Domain and To header fields

by Martin Koenig [toplink-plannet GmbH]

Hi Adrian, a call to pstn is 012345@localdomain a call to iptel is 012345@remotedomain Now, the iptel-invite should not be touched and forwarded straight, the pstn invite must be rewritten to +4912345@localdomain. Now the problem is if the UA initiating the call is sending an ACK. It will send the ACK with Request-URI 012345@finaldestination and several route header fields to traverse the proxy chain. This 012345@finaldestination must not be touched if the initial call was for a remote domain (To will be 012345@remotedomain), but it must be rewritten do +4912345@finaldestination for a PSTN call (To will be 012345@localdomain). Thus there is the need to look after the To value. Thanks for your feedback, regards, Martin ----- Original Message ----- From: Adrian Georgescu To: Martin Koenig [toplink-plannet GmbH] Sent: Wednesday, September 08, 2004 5:28 PM Subject: Re: [Serusers] Domain and To header fields I understand better now. But why would you do that? If I understand maybe some idea pops up. On Sep 8, 2004, at 5:15 PM, Martin Koenig [toplink-plannet GmbH] wrote: Hi Adrian, the URI will not be local, it will be the remote target as defined for loose routing. Regards, Martin ----- Original Message ----- From: Adrian Georgescu To: Martin Koenig Cc: serusers(a)lists.iptel.org Sent: Tuesday, September 07, 2004 10:41 PM Subject: [Serusers] Domain and To header fields Martin, try is_uri_host_local() Adrian >>>>>>>>>>>>>>> Hi List, I have a multi domain ser setup with the domain module operating, and I need to check whether the TO header field contains a local domain or not. Can this be done with is_domain_local()? If yes how? Or do i need to write a new function based on is_from_local() to achieve such a goal. The Problem is that there is no possiblity to distinguish between our user calling 012345 at iptel.org (Remote SIP desination) or 012345 at domain.com (PSTN target) after (!) the initial INVITE, especially with loose routing. This is important because Request-URIs to the PSTN have to be transformed (add f.e. +49), but requests to other sip destinations have to not be touched. Thanks for your input, regards,

19 years, 9 months

[Serusers] RE: [Sems] ivr with sems and ser

by ser die

hello richard , as per your previous suggestin i got new cvs download but i donot know why the same problem is presisting for me is either my system lacks some thing for that software which i doubt. so now my Make file look like this ***************************************************** [root@server ivr]# cat Makefile plug_in_name = ivr # # perl specific # # uncomment the next lines if you want to script the ivr with perl scripts # put used Perl modules here, e.g. time, mysql etc. PERL_DYNLOAD_MODULES = /usr/lib/perl/5.8/auto/IO/IO.so /usr/lib/perl/5.8/auto/Fcntl/Fcntl.so \ /usr/lib/perl/5.8/auto/Socket/Socket.so /usr/lib/perl/5.8/auto/DBI/DBI.so \ /usr/lib/perl/5.8/auto/Sys/Hostname/Hostname.so /usr/lib/perl/5.8/auto/Sys/Syslog/Syslog.so \ /usr/lib/perl/5.8/auto/Sys/Syslog/Syslog.so /usr/lib/perl5/auto/Date/Calc/Calc.so \ /usr/lib/perl/5.8/auto/MIME/Base64/Base64.so /usr/lib/perl/5.8/auto/POSIX/POSIX.so \ /usr/lib/perl/5.8/auto/Time/HiRes/HiRes.so /usr/lib/perl/5.8/auto/Cwd/Cwd.so \ /usr/lib/perl5/auto/Bit/Vector/Vector.so /usr/lib/perl5/auto/DBD/mysql/mysql.so \ /usr/lib/perl/5.8/auto/Data/Dumper/Dumper.so /usr/lib/perl/5.8/auto/File/Glob/Glob.so PERL_module_ldflags = `perl -MExtUtils::Embed -e ldopts` -DPERL_IMPLICIT_CONTEXT \ $(PERL_DYNLOAD_MODULES) PERL_module_cflags = -DIVR_PERL `perl -MExtUtils::Embed -e ccopts ` -DPERL_IMPLICIT_CONTEXT # # flite text to speech # # uncomment the next lines if you want to have flite text-to-speech (ivr.say("Hello there"); ) FLITE_DIR = /usr/src/flite-1.2-release ALT_FLITE_DIR = /usr/include/flite IVR_TTS_module_ldflags = -L$(FLITE_DIR)/lib -lm -lflite_cmu_us_kal -lflite_usenglish \ -lflite_cmulex -lflite IVR_TTS_module_cflags = -I$(FLITE_DIR)/include -I$(ALT_FLITE_DIR) -DIVR_WITH_TTS LOCAL_INCLUDES = -I$(FLITE_DIR)/lang/usenglish LD_FLAGS = -ldl -lpthread -lutil -lm -Xlinker --export-dynamic -Xlinker --no-strip-discarded module_ldflags = -ldl -lpthread -lutil -lm -Xlinker --export-dynamic \ $(PYTHON_module_ldflags) \ $(IVR_TTS_module_ldflags) \ $(PERL_module_ldflags) # for perl support: # -DIVR_PERL `perl -MExtUtils::Embed -e ccopts ` # for flite text-to-speech support -DIVR_WITH_TTS module_cflags = \ $(PYTHON_module_cflags) \ $(IVR_TTS_module_cflags) \ $(PERL_module_cflags) include ../Makefile.app_module [root@server ivr]# ***************************************************** and the erroor information is ***************************************************** Ivr.cpp: In member function `virtual void IvrDialog::onSessionStart(AmRequest*)': Ivr.cpp:243: no matching function for call to `IvrPython::cancel()' make[1]: *** [Ivr.o] Error 1 make[1]: Leaving directory `/root/answer_machine/plug-in/ivr' make: [all] Error 2 (ignored) ***************************************************** with regards serdiehard __________________________________ Do you Yahoo!? Read only the mail you want - Yahoo! Mail SpamGuard. http://promotions.yahoo.com/new_mail

19 years, 9 months

[Serusers] ser-mysql accounting: Nothing is accounted or recorded

by Wilson Abigaba

I've been with this problem for over 2 weeks now..i still havn't found a solution. I always read ser-accouting problems and possible solutions and apply them to my sip server but nothing good has come out. I installed ser-0.8.14 on 4.9-STABLE FreeBSD running mysql Ver 12.22 Distrib 4.0.16, for portbld-freebsd4.9 (i386) and all seems to be well. I then added the acc module by reinstalling. I uncommented out the sql line in acc/Makefile and then made exlude_module="" modules, and finally installed. I start SER without any errors, in full debug mode and logging its stuff on STDOUT, when I make a call I even see it sending invite,trying etc. but NOTHING is recorded in the ser database! Some one please look at my ser.cfg and tell me what may be wrong, many thanks ... Regards, Wilson

19 years, 9 months

[Serusers] 400 Bad Request from SUBSCRIBE messages

by blanca_mayayo＠lycos.es

19 years, 9 months

[Serusers] Ser Alias !!!

by Razvan Nemesiu

Hi ..I want to do something like this: When someone calls me at three numbers ( for example 300800901 and 300800902 and 300800903 ) I want to direct those calls to a single number ( for example 300800900 ). And nother problem: if someone calls 300800910 and the number is busy then I want to direct him to 300800911 or 300800912 and if these two last numbers are busy too then I want him to be directed to 2222222 (for example).

19 years, 9 months

← Newer
1
...
27
28
29
30
31
32
33
...
39
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users September 2004