sr-users September 2004

sr-users@lists.kamailio.org

190 participants
382 discussions

[Serusers] use of rewritehostport,forward,rewritehost
by voip technocrat 22 Sep '04

22 Sep '04

dear list, can any body just give briefly about what is the difference between the three basically iam using forward to redirect the call so what about the remaining two thanks for sparing time ________________________________________________________________________ Yahoo! India Matrimony: Find your life partner online Go to: http://yahoo.shaadi.com/india-matrimony

2 1

[Serusers] how to configure ssl
by Geniatakis Dimitrios 22 Sep '04

22 Sep '04

i want to use ssl and i can't find information about how to configure ser to use ssl , can anyone help me??? thanks

1 0

[Serusers] Last two messages
by Masoud Safi 22 Sep '04

22 Sep '04

Hi, My last two messages that I posted to serusers(a)lists.iptel.org did not appear on the list. I am wondering if you got my message from about 5 minutes ago. Please confirm. Thanks MS >From: serusers-bounces(a)lists.iptel.org >To: masoudsafi(a)hotmail.com >Subject: Your message to Serusers awaits moderator approval >Date: Wed, 28 Jul 2004 00:21:24 +0200 > >Your mail to 'Serusers' with the subject > > Re: [Serusers] /var/run/.nscd_socket not found > >Is being held until the list moderator can review it for approval. > >The reason it is being held: > > Post by non-member to a members-only list > >Either the message will get posted to the list, or you will receive >notification of the moderator's decision. If you would like to cancel >this posting, please visit the following URL: > > >http://lists.iptel.org/mailman/confirm/serusers/68c4426df31b2a7620867772170… > _________________________________________________________________ Is your PC infected? Get a FREE online computer virus scan from McAfee® Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963

1 0

[Serusers] SER: syslog ERROR: parse_uri
by Masoud Safi 22 Sep '04

22 Sep '04

Greetings, One of my user names keep failing on registration, and on the syslog this is what I am getting. Any ideas where to look for the problem? Thanks MS Sep 21 22:52:13 sipsvr2 /usr/local/sbin/ser[32122]: ERROR: parse_uri: bad port in uri (error at char in state 3) parsed: <sip:1:xxx.xxx.xxx.xxx>(18) /<sip:1:xxx.xxx.xxx.xxx> (18) Sep 21 22:52:13 sipsvr2 /usr/local/sbin/ser[32122]: get_username(): Error while parsing R-URI Sep 21 22:52:13 sipsvr2 /usr/local/sbin/ser[32122]: insert_RR(): Error while extracting username Sep 21 22:52:13 sipsvr2 /usr/local/sbin/ser[32122]: record_route(): Error while inserting Record-Route line Sep 21 22:52:13 sipsvr2 /usr/local/sbin/ser[32122]: ERROR: parse_uri: bad port in uri (error at char in state 3) parsed: <sip:1:xxx.xxx.xxx.xxx>(18) /<sip:1:xxx.xxx.xxx.xxx> (18) _________________________________________________________________ Is your PC infected? Get a FREE online computer virus scan from McAfee® Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963

1 0

[Serusers] pilot numbers and/or allocating number ranges
by Jamie Baddeley 22 Sep '04

22 Sep '04

Hi, I'd like my SER to have the logic to send all (e.g) 474xxxx calls (555xxxx or whateverxxxx) at any given Asterisk box. Ideally I'd like to provision (or users self provision) this using the SerWeb (with some hacking) - rather than changing ser.cfg everytime I add a * pabx.... Using Aliases (with wildcards???) is one approach. Using R-URI would probably mean ser.cfg updates. Are there any other feasible approaches to use? cheers Jamie --

1 0

[Serusers] Changing default MySQL password
by Bastian Schern 21 Sep '04

21 Sep '04

Hi there, which steps I have to go to change the default MySQL password "heslo" to "xyz"? 1. Change Password for "ser" and "serro" in DB mysql: # mysql -u root -p mysql mysql> update user set password=PASSWORD('xyz') where User='ser'; mysql> update user set password=PASSWORD('xyz') where User='serro'; 2. Change ser.cfg: modparam("usrloc", "db_url", "sql://ser:xyz@localhost/ser") modparam("usrloc", "db_mode", 0) modparam("usrloc", "db_mode", 2) modparam("auth_db", "db_url", "sql://ser:xyz@localhost/ser") modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("rr", "enable_full_lr", 1) Are this all steps? I don't think so, because it will not work for me. :-( Regards Bastian

1 0

[Serusers] Mediaproxy question
by Adrian Georgescu 21 Sep '04

21 Sep '04

Can you make sure you call end_media_session(); before loose_route()? >>>>>>>>>>>> Hello List. My test settings are as follows - [UA-1]-------[ser + mediaproxy 1]--------------[ser + mediaproxy 2]-----------------[UA-2] I have the following setup in both the ser.cfg files (ser 1 and ser 2) - ----------------------------------------- if (method == "BYE" || method == "CANCEL") { end_media_session(); } ----------------------------------------- However it appears that when UA2 ends the call, SER 2 calls end_media_session() - but SER 1 doesn't. When UA1 ends the call, the opposite happens. Shouldn't both the SERs be calling the end_media_session()? Thanks for any feedback. Regards, Dhiraj

1 0

[Serusers] Question about Mediaproxy and NAT'd clients.
by Ricardo Martinez 21 Sep '04

21 Sep '04

Hello. I have a question about the Mediaproxy and NAT'd clients. I am trying to use the Mediaproxy module to solve the NAT'd clients problems, until now i have all the scenarios working ok, but i have a question. I'm using the ser.cfg configuration example in the /modules/mediaproxy/config directory and i have three clients, one is behind a NAT and the other two are using public IP's. When i call from the NAT'd client to the Public-IP client the call is going through the mediaproxy, and that's ok. In the same way when i call from a Public-IP client to a NAT'd client the call is going through the mediaproxy, but when i call from one Public-IP client to the another Public-IP client the call is going through the mediaproxy too. I think this is not normal. Does the ser.cfg file example work in that way? I suppose that in a normal enviroment a call between two Public-IP clients the media goes directly between them, and there is no mediaproxy in the middle. Can someone provide me a ser.cfg example that works on that way?. I'm a liittle bit stuck with this issue for a while. Thanks in advance. Best Regards Ricardo Martinez

1 0

[Serusers] ser + Vegastream vega 50 BRI : Handling incoming calls
by Oliver Zilken 21 Sep '04

21 Sep '04

Hi, can anyone help me with this Problem: I am running a Vega 50BRI Gateway with ser 0.8.14. Outgoing Calls are handled correctly. But when I try to make a call from PSTN to the Gateway, I get this strange error: --------------------------------------------- SIP Messages: Vega50----INVITE---->SER: SER----INVITE---->UAC Vega50<----TRYING----SER Vega50----CANCEL---->SER ---------------------------------------------- The Vega 50 Event log show this: LOG: 01/01/1999 00:05:09.852 ISDN (I)R01C01 incoming call ref=[f1000020] srce=TEL:0031523338540,DISP:0031523338540 AMT,NAMEC:0031523338540 AMT [0] LOG: 01/01/1999 00:05:19.857 ROUTER (I)R0bC00 FINDROUTE profile:2(ISDN_TO_LAN) plan:1 call ref=[f1000020] <-- ISDN [1,1] dest=TEL:1004 --> SIP [1,1] dest=TEL:Oliver LOG: 01/01/1999 00:05:19.967 ISDN (I)R04C01 disconnect 81 call ref=[f1000020] LOG: 01/01/1999 00:05:19.972 SIP (I)R04C11 disconnect(disc req) 81 call ref=[f1000020] --------------------------------------------- My Vega 50 Dial Plan for incoming calls: [planner.profile.2] enable=1 name=ISDN_TO_LAN [planner.profile.2.plan.1] cost=0 dest=IF:99,TEL:Oliver group=0 name=From_ISDN srce=IF:01,TEL:<.*> ----------------------------------------------- The result is that, after the PSTN caller gets disconnected after ca. 8 seconds, the SIP-UAC starts ringing. What did I wrong ?????? Thanks, Oliver -- Oliver Zilken Fraunhofer - FOKUS Research Institute for Open Communication Systems Competence Centre for Advanced Satellite Communication Schloss Birlinghoven, 53754 Sankt Augustin, Germany Phone: +49-2241-14-2947 Fax: +49-2241-14-1005 E-mail: mailto:Oliver.Zilken@fokus.fhg.de SIP: sip:Oliver@sip.lab.vsat.de Web: http://www.fokus.fraunhofer.de/satcom

1 0

[Serusers] Media Proxy Server Problem
by 牛坤 21 Sep '04

21 Sep '04

route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { if( method!="ACK") { sl_send_reply("513", "Message too big"); }; break; }; if (method=="REGISTER"||!search("^Record-Route:")) { if (is_from_local()) { # Mark as NAT'ed log("LOG: Someone trying to register from private IOP, rewriting \n"); if (client_nat_test("3")) { setflag(2); force_rport(); fix_contact(); }; }; }; if(method=="REGISTER") { save("location"); break; }; lookup("aliases"); #if(method=="INVITE") #{ #if(!(is_from_local()||is_uri_host_local())) #{ # sl_send_reply("403","Relaying is forbidden"); # break; #}; #t_on_failure("1"); #} #else if(method=="BYE"||method=="CANCEL") #{ # end_media_session(); #}; if( loose_route()) { if(method=="INVITE"||method=="ACK") { use_media_proxy(); }; t_relay(); break; }; if (method == "INVITE") { record_route(); }; if (client_nat_test("3") && !search("^Record-Route:")) { # Mark as NAT'ed force_rport(); fix_contact(); }; if (method=="INVITE") { t_on_reply("1"); }; if (is_uri_host_local()) { if (!lookup("location")) { sl_send_reply("404", "User not found"); break; }; }; if (method=="INVITE" || method=="ACK") { use_media_proxy(); }; if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; } failure_route[1] { end_media_session(); } onreply_route[1] { if (status=~"(183)|(2[0-9][0-9])") { if (client_nat_test("1")) { fix_contact(); }; use_media_proxy(); }; }

1 0

← Newer
1
...
11
12
13
14
15
16
17
...
39
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users September 2004