sr-users August 2004

sr-users@lists.kamailio.org

181 participants
424 discussions

[Serusers] Gransteam 486, auth digest on ser.

by Sean Lowry

i have ser running with db auth. i have 3 users. 1-asterisk 1-x-lite client 1-grandstream 486. now the asterisk and x-lite client register with no problems. but the grandsteam 486 fails everytime. here's the error from the grandstream 14(15417) receive_msg: cleaning up 9(15406) SIP Request: 9(15406) method: <REGISTER> 9(15406) uri: <sip:*.*.*.*> 9(15406) version: <SIP/2.0> 9(15406) parse_headers: flags=1 9(15406) Found param type 232, <branch> = <z9hG4bK2dfa9e7d29a2dac4>; state=16 9(15406) end of header reached, state=5 9(15406) parse_headers: Via found, flags=1 9(15406) parse_headers: this is the first via 9(15406) After parse_msg... 9(15406) preparing to run routing scripts... 9(15406) DEBUG : is_maxfwd_present: searching for max_forwards header 9(15406) parse_headers: flags=128 9(15406) end of header reached, state=9 9(15406) DEBUG: get_hdr_field: <To> [26]; uri=[sip:60005@*.*.*.*] 9(15406) DEBUG: to body [<sip:60005@*.*.*.*> ] 9(15406) get_hdr_field: cseq <CSeq>: <100> <REGISTER> 9(15406) DEBUG: is_maxfwd_present: value = 70 9(15406) DEBUG: add_param: tag=bc875e4c67b6e1a6 9(15406) end of header reached, state=29 9(15406) parse_headers: flags=256 9(15406) DEBUG: get_hdr_body : content_length=0 9(15406) found end of header 9(15406) find_first_route(): No Route headers found 9(15406) loose_route(): There is no Route HF 9(15406) check_self - checking if host==us: 12==9 && [*.*.*.*] == [127.0.0.1] 9(15406) check_self - checking if port 5060 matches port 5060 9(15406) check_self - checking if host==us: 12==12 && [*.*.*.*] == [*.*.*.*] 9(15406) check_self - checking if port 5060 matches port 5060 9(15406) parse_headers: flags=4096 9(15406) pre_auth(): Credentials with given realm not found 9(15406) build_auth_hf(): 'WWW-Authenticate: Digest realm="mydomain.com", nonce="411790fae9ff2d7739f5e19e3f8b5b675e82c1b7" ' 9(15406) parse_headers: flags=-1 9(15406) check_via_address(*.*.*.*, *.*.*.*, 0) 9(15406) DEBUG:destroy_avp_list: destroing list (nil) 9(15406) receive_msg: cleaning up does anyone have any ideas ? Sean

19 years, 10 months

RE: [Serusers] How to config SER for authentication and accouting using radius?

by Morris, Scott

I have SER and up to where I can work on the RADIUS issues. Thanks for your patience on this. In Messenger I am putting in morriss(a)comm01.orau.gov for my signin to avoid the 483 error. Does it see the realm as orau.gov, or is the realm defined as comm01.orau.gov? Scott Morris Enterprise Network Engineer DOE - ORAU / ORISE 865-576-4672 -----Original Message----- From: Morris, Scott Sent: Monday, August 09, 2004 2:52 PM To: 'Jan Janak' Cc: serusers(a)lists.iptel.org Subject: RE: [Serusers] How to config SER for authentication and accouting using radius? Only that one line needs to be changed for RADIUS? The lines regarding the auth modules don't need to be changed? Scott Morris Enterprise Network Engineer DOE - ORAU / ORISE 865-576-4672 -----Original Message----- From: Jan Janak [mailto:jan@iptel.org] Sent: Friday, August 06, 2004 5:37 AM To: michael(a)polylink.net Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] How to config SER for authentication and accouting using radius? There is a ser-radius howto: http://www.iptel.org/ser/ser_radius.html Regarding the configuration file, for authentication it will be the same as the default configuration file, just replace www_authorize with radius_www_authorize. For accounting, see the documentation of acc module: http://www.iptel.org/ser/doc/modules/html/acc.html Jan. On 06-08 10:03, michael(a)polylink.net wrote: > Dear All, > > I need RADIUS authentication and accounting in SER, but I don't know > how > to write SER's config file, ser.cfg. Who can tell me how to do it and give > me an example? > > Michael Zhang > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

19 years, 10 months

RE: [Serusers] How to config SER for authentication and accouting using radius?

by Morris, Scott

Only that one line needs to be changed for RADIUS? The lines regarding the auth modules don't need to be changed? Scott Morris Enterprise Network Engineer DOE - ORAU / ORISE 865-576-4672 -----Original Message----- From: Jan Janak [mailto:jan@iptel.org] Sent: Friday, August 06, 2004 5:37 AM To: michael(a)polylink.net Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] How to config SER for authentication and accouting using radius? There is a ser-radius howto: http://www.iptel.org/ser/ser_radius.html Regarding the configuration file, for authentication it will be the same as the default configuration file, just replace www_authorize with radius_www_authorize. For accounting, see the documentation of acc module: http://www.iptel.org/ser/doc/modules/html/acc.html Jan. On 06-08 10:03, michael(a)polylink.net wrote: > Dear All, > > I need RADIUS authentication and accounting in SER, but I don't know > how > to write SER's config file, ser.cfg. Who can tell me how to do it and give > me an example? > > Michael Zhang > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

19 years, 10 months

RE: [Serusers] Problem with MS Messenger and SER 8.12 - "Service unavailable"

by Morris, Scott

I was working on two different servers, and I had a typo. Thanks. One question -- In the default ser.cfg file it has: # Uncomment this if you want digest authentication # mysql.so must be loaded ! # loadmodule "/usr/lib/ser/modules/auth.so" # loadmodule "/usr/lib/ser/modules/auth_db.so" Does mysql.so have to be loaded/running for RADIUS authentication to work? I don't see this in the SER "Radius How-to" Do you have a copy of a sercfg file where RADIUS is working? Scott Morris Enterprise Network Engineer DOE - ORAU / ORISE 865-576-4672 -----Original Message----- From: Jiri Kuthan [mailto:jiri@iptel.org] Sent: Monday, August 09, 2004 8:23 AM To: Morris, Scott; 'serusers(a)lists.iptel.org' Subject: RE: [Serusers] Problem with MS Messenger and SER 8.12 - "Service unavailable" well, then may be you configured it in debugging mode (fork=no) and started SER only on loopback interface or did some other similar mistake which results in SER not listening on the proper interface. Try "serctl ps" to see where SER is listening. -jiri At 02:17 PM 8/9/2004, Morris, Scott wrote: >I just did a ps -ef and it shows the process is running: > > root@comm01 root]# ps -ef | grep ser > rpcuser 1555 1 0 May26 ? 00:00:00 rpc.statd > bin 1779 1 0 May26 ? 00:00:01 >/usr/sbin/cannaserver -syslog -u bin > root 9488 1 99 Aug08 ? 21:37:06 /usr/sbin/ser > >Scott Morris >Enterprise Network Engineer >DOE - ORAU / ORISE >865-576-4672 > > >-----Original Message----- >From: Jiri Kuthan [mailto:jiri@iptel.org] >Sent: Sunday, August 08, 2004 2:00 PM >To: Morris, Scott; 'serusers(a)lists.iptel.org' >Subject: Re: [Serusers] Problem with MS Messenger and SER 8.12 - "Service >unavailable" > > >This is the problem, SER can't be reached. Most likely, it is not >running. > >Internet Control Message Protocol > Type: 3 (Destination unreachable) > Code: 3 (Port unreachable) > >-jiri > >At 05:27 PM 8/8/2004, Morris, Scott wrote: >>I am running SER 8.12 (with radius modules) on a Redhat Linux ES 3.0 >system. >>My client is MS Windows Messenger 4.72. I start MS Windows Messenger and >>quickly receive the following message: >> >> "Signing in to Communications Service failed because the >>service is temporarily unavailable." >> >>I have attached the ngrep from the server, and also a packet capture >>at >>the client workstation running MS Win Messenger. >> >>I am registering as morriss(a)orau.gov, and I believe the coxT(a)orau.gov >>is showing up because this person is one my contact list. >> >>Scott Morris >>Enterprise Network Engineer >>DOE - ORAU / ORISE >>865-576-4672 >> >> >> >> >>_______________________________________________ >>Serusers mailing list >>serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers > >-- >Jiri Kuthan http://iptel.org/~jiri/ > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

19 years, 10 months

[Serusers] rtpproxy + nathelper + radius + mediaproxy + ser0.8.14 and it is running fine.

by ito

rtpproxy + nathelper + radius + mediaproxy + voicemail + asterisk + ser0.8.14 and it is running fine. ser-0.8.14-0.i386.rpm ser-0.8.14-0.src.rpm ser-debuginfo-0.8.14-0.i386.rpm ser-jabber-0.8.14-0.i386.rpm ser-mysql-0.8.14-0.i386.rpm ser-radius-0.8.14-0.i386.rpm /////////////////////////////////////// http://www.voice.dyndns.tv sip:8100@voice.dyndns.tv Saitama Japan Sip EXpress router Support Team ///////////////////////////////////////

19 years, 10 months

[Serusers] Problem using PSTN.

by Manoj Kumar Joshi

Hi Gary, Can you send me your config file?...i am facing the same problem. Regards, Manoj Manoj kumar joshi Ascent Telecom Telephone: (9111)-51755595, 51755597, 26566462 Fax: (9111)-51755596 eFax: (1)-309-424-5711 Mobile: 919811618189 http://www.ascenttelecom.com

19 years, 10 months

[Serusers] how play different greeting message from SEMS

by Koyama Zehi

Dear All; I could not understand what is the difference between the implementation of announcement and voicemail module inside the SEMS. Actually my problem is that i want to play two different .wav file from the SEMS. When I saw the sems.conf file, i could not found the way to give the path of two different .wav file. My need is that if caller is connecting to announcement server (vm("/tmp/am_fifo","announcement")) then he should listen some specific voice file say xyz.wav file from the announcement server. And if the caller is connecting to voicemeil server (vm("/tmp/am_fifo","voicemail")) then he should listen some other specific voice file say abc.wav file from the voicemail server. Can any body tell me how can i make thi setting sems.conf file or something else where... thanks --------------------------------- Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages!

19 years, 10 months

[Serusers] RE: [Serdev] dispatcher module

by serdev＠dror.mailshell.com

I think it would be great to extend the "dispatcher" module, to be able to dispatch among registered entries. that is, instead of a database, select an address based on the current contacts list. e.g.: Assume I have an application that registers under the name "app(a)iptel.org" from several physical servers. The dispatcher will allow me to load-balance among those servers, by selecting one of the registered contacts. maybe it can be added by defining a set named "contacts" for ds_select_dst. note: it would be best if the function first find the highest q-value in those contacts, then select only among the entries with the highest value. Alternately, it can be configured so that it gives relative "weight" to entries based on their q-value. example usage: route{ if ( !mf_process_maxfwd_header("10") ) { sl_send_reply("483","Too Many Hops"); drop(); }; if ( method=="REGISTER" && uri= ~"app" ) { save( "servers" ); sl_send_reply( "200", "Registered ok" ); break; }; if ( lookup( "servers" ) ) { ds_select_dst("contacts", "0"); forward(uri:host, uri:port); # t_relay(); }; } -----Original Message----- From: serdev-bounces(a)lists.iptel.org [mailto:serdev-bounces.at.iptel.org@serdev.at.dror.mailshell.com]On Behalf Of Daniel-Constantin Mierla Sent: Friday, August 06, 2004 14:44 To: serdev(a)lists.iptel.org; 'serusers(a)lists.iptel.org' Subject: [Serdev] dispatcher module Hello, I wrote a tiny module "dispatcher", able to select a destination to relay the requests to from a set of addresses. It would compute hashes over parts of the request (e.g., call-id) and select an address from the destination set based on modulo function. The selected address is used then as outbound proxy. The module could be used as a stateless load balancer, but with no guarantee of fair distribution. It can be easily extended (other distribution functions), but right now I have no time -- contributors will be very welcome. Would someone be interested in such module? If yes, I will add it to cvs very soon. Daniel _______________________________________________ Serdev mailing list serdev(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serdev ---------- Your email is protected by Mailshell ---------- To block spam or change delivery options: http://www.mailshell.com/control.html?a=bsw4nz4bh24sm4jnp9dk8hosnqhlnxzi FreshAddress.com http://rd.mailshell.com/ad482 Earn up to $3 for each of your friends who signs up with Mailshell! http://rd.mailshell.com/sp5

19 years, 10 months

RE: [Serusers] Problem with MS Messenger and SER 8.12 - "Service unavailable"

by Morris, Scott

I just did a ps -ef and it shows the process is running: root@comm01 root]# ps -ef | grep ser rpcuser 1555 1 0 May26 ? 00:00:00 rpc.statd bin 1779 1 0 May26 ? 00:00:01 /usr/sbin/cannaserver -syslog -u bin root 9488 1 99 Aug08 ? 21:37:06 /usr/sbin/ser Scott Morris Enterprise Network Engineer DOE - ORAU / ORISE 865-576-4672 -----Original Message----- From: Jiri Kuthan [mailto:jiri@iptel.org] Sent: Sunday, August 08, 2004 2:00 PM To: Morris, Scott; 'serusers(a)lists.iptel.org' Subject: Re: [Serusers] Problem with MS Messenger and SER 8.12 - "Service unavailable" This is the problem, SER can't be reached. Most likely, it is not running. Internet Control Message Protocol Type: 3 (Destination unreachable) Code: 3 (Port unreachable) -jiri At 05:27 PM 8/8/2004, Morris, Scott wrote: >I am running SER 8.12 (with radius modules) on a Redhat Linux ES 3.0 system. >My client is MS Windows Messenger 4.72. I start MS Windows Messenger and >quickly receive the following message: > > "Signing in to Communications Service failed because the >service is temporarily unavailable." > >I have attached the ngrep from the server, and also a packet capture at >the client workstation running MS Win Messenger. > >I am registering as morriss(a)orau.gov, and I believe the coxT(a)orau.gov >is showing up because this person is one my contact list. > >Scott Morris >Enterprise Network Engineer >DOE - ORAU / ORISE >865-576-4672 > > > > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

19 years, 10 months

RE: [Serusers] mediaproxy + ser0.8.14 problem

by Dave Bath

Hey Adrian, I have been following this thread, as I had a similar problem last week. I have tried all the things suggested here, but I am still experiencing them same error. I have downloaded the latest mediaproxy.c and functions.c and recompiled mediaproxy, and have followed the ser.cfg as closely as I can... however, as soon as media_proxy is enabled, ser crashes out ungracefully. Does anyone have any further ideas? My ser.cfg is at http://161.30.94.136/ser.cfg (getting a bit long to keep posting now...) Any help would be very very gratefully received at this point. Many thanks, D -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Adrian Georgescu Sent: 06 August 2004 12:33 To: Sean Lowry Cc: serusers(a)lists.iptel.org Subject: [Serusers] mediaproxy + ser0.8.14 problem Your config calls fix_contact twice, this is why is crashing. Until this is fixed please follow the guidelines in ser.cfg example from http://cvs.berlios.de/cgi-bin/viewcvs.cgi/*checkout*/ser/sip_router/ modules/mediaproxy/config/ser.cfg?rev=HEAD&content-type=text/plain Adrian >>> here is my config any help at all work be great

19 years, 10 months

← Newer
1
...
29
30
31
32
33
34
35
...
43
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users August 2004