When we use command like
Log (1, " request ...same domain")
Where is this log stored and how can I see this statement.
thanks
Dipen K Gala
Fidelity Investments System Company - Telecom
Phone: (617) 563-2729
Email: Dipen.Gala(a)FMR.com
Try using ngrep -q SIP to see all the traffic. Did you install serweb in
unix or windows machine?
Thanks
&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*
C.M. Rahman Jr.
CTO
CCNP, MCSE Security "Secure your self by securing your System"
CompTI Security Plus Certified
CCS Internet
http://www.ccsi.com <http://www.ccsi.com/>
13704 Research Blvd. Building O-Suite 4
Austin, TX 78750
Tel: 512-257-2274 Ex: 115
________________________________
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On
Behalf Of Gala, Dipen
Sent: Wednesday, June 23, 2004 12:54 PM
To: serusers(a)lists.iptel.org
Subject: [Serusers] SERWEB packets
Guys I have my serweb running and I am trying to sniff the sip packets
through ethereal sniffer s/w
But to my shock there is no sip traffic.
I guess serweb uses TCP instead of UDP bcoz I am seeing tons of TCP
traffic.
Has any one encountered such thing.
Can I change the serweb setting so that I can have UDP instead of TCP.
Also if its working on TCP how can I see my sip information..
Also does anyone knows how the hell can I use serweb to make a call
I have added users in my phone book
But they always show offline, even though they have logged in.
If anybody can share his ser.cfg with me for this it will be very nice
Thanks
Dipen K Gala
Fidelity Investments System Company - Telecom
Phone: (617) 563-2729
Email: Dipen.Gala(a)FMR.com
Hello everybody,
I installed the SER again in my computer and I need to know about the authentification.. do I need to use mysql authentification or is it enough to use radius?
what are the configuration files that I need to run SER?
I would be very grateful for your help, I am a very beginner in SIP...
Best Regards,
Sou
---------------------------------
Créez gratuitement votre Yahoo! Mail avec 100 Mo de stockage !
Créez votre Yahoo! Mail
Dialoguez en direct avec vos amis grâce à Yahoo! Messenger !
Hello:
I need help configuring CC-Diversion to access an Octel 350 voice
mail server through a Cisco 2620XM gateway. All inbound and out
bound calls work through the same gateway. Under some circumstances
an unanswered inbound call gets diverted to the gateway with the
CC-Diversion header applied and under other circumstances no
such diversion takes place. If you have this feature working I'd
like to ask you some questions. Specifically what was done
on the Cisco box to make this work.
Thanks,Steve
--
ISC Network Engineering
The University of Pennsylvania
3401 Walnut Street, Suite 221A
Philadelphia, PA 19104
voice: 215-573-8396
215-746-7903
fax: 215-898-9348
sip:blairs@upenn.edu
You need to give that file write permissions in the ser configuration file. fifo_mode=0666.
Ex: check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
fifo_mode=0666
Then restart ser, this should fix your problem.
Regards,
Freddy
-----Original Message-----
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org]On Behalf Of Gala, Dipen
Sent: Wednesday, June 23, 2004 12:12 PM
To: serusers(a)lists.iptel.org
Subject: [Serusers] Serweb doubt
Hi I have my serweb running integrated with Mysql. All that is fine
But I have a error always saying "sorry -- cannot open write fifo"
I have never done anything with fifo. Do I have to set it up
If yes then how.
Also I want to make calls through my serweb user webpage but I don't see any option of doing that.
I can only see a option of IM in it, but that too does not work due to FIFO error.
So any1 out there can help me out ......
Thanks
Dipen K Gala
Fidelity Investments System Company - Telecom
Phone: (617) 563-2729
Email: Dipen.Gala(a)FMR.com
Hi I have my serweb running integrated with Mysql. All that is fine
But I have a error always saying "sorry -- cannot open write fifo"
I have never done anything with fifo. Do I have to set it up
If yes then how.
Also I want to make calls through my serweb user webpage but I don't see
any option of doing that.
I can only see a option of IM in it, but that too does not work due to
FIFO error.
So any1 out there can help me out ......
Thanks
Dipen K Gala
Fidelity Investments System Company - Telecom
Phone: (617) 563-2729
Email: Dipen.Gala(a)FMR.com
I have a user agent that does not ACK after 200 OK.
Is it possible to configure SER to generate an ACK and reply to 200 OK?
broken UA ---- INVITE ---> ser
<---- 100 ------- ser ---- INVITE ---> gateway
183 183
ser <--- 200 OK---- gateway
broken UA <---- 200 ----- ser
<------ 2 way RTP ----------->
Call is mostly established, but broken UA does not ACK the 200 OK.
Can we generate the following packet?
ser --- ACK ---> gateway
This would allow the broken UA to interop.
Can SER generate this ACK?
Thanks,
Jamie Yukes
I have successfully installed the latest SERweb and am able to login under admin. The problem I am having now
is that none of my users can login and see their account. I have checked all my configurations in php,mysql
and apache but don't see any obvious errors. I have a password for the users and they are using the correct
one. I check the error logs and don't see any messages. Has anyone had a similar problem?
Dear Sir,
I am new to SER.
Can I modify the code and run it as per my need?
I am working on a SIP application and need to test it with a server
which will understand my modified SIP Message. This SIP message will
have some specific Parameters. So can I modify registrar code to work as
per my need?
Rgds-
Vanita Jain
