sr-users April 2004

sr-users@lists.kamailio.org

138 participants
266 discussions

by Kapil Dhawan

Thx yes i got this link and thinking of working on it too regards >From: "Franz Edler" <franz.edler(a)utanet.at> >Reply-To: <franz.edler(a)utanet.at> >To: "'Kapil Dhawan'" <sersavvy(a)hotmail.com> >Subject: RE: [Serusers] Call Parking >Date: Fri, 2 Apr 2004 14:05:18 +0200 > >From: Of Kapil Dhawan Sent: Friday, April 02, 2004 8:31 AM > > > > How can i implement Call Parking > >Look at: draft-ietf-sipping-service-examples-06 / 2.16 Call Park >It shows how call parking can be implemented using REFER. > > > How can i implement it in SER. is it already there... > >This is a different role (not SIP proxy) involving UA and media server >functionality. I think this is not the mainstream functionality of SER. >You should better look at Media Servers supporting Call Parking. > >Franz > _________________________________________________________________ Buzz on your screen! Download on your screen. http://www.msn.co.in/Download/screensaver/ Keep yourself smiling!

20 years

[Serusers] BUG: module nathelper and tcp_main_loop: dead child 5

by jimmy huang

Hi, I would like to try use the module nathelper with rtpproxy to test when INVITE , voice (rtp) can pass nat and firewall, just like (http://www.informatik.uni-bremen.de/~prelle/terena/cookbook/main/ch04s07.ht… 4.7.3.5.1. SIP Express Router mentioned), but ser crashes after receive REGISTER but after REGISTER , ser crashe... ================================================================= syslog: BUG: 15 (23183) tcp_main_loop: dead child 5 0 (23168) child process 23173 existed by a signal 11 0 (23168) core was not generated 0 (23168) INFO:terminating due to SIGCHILD ... ... ================================================================= i install ser0.8.12 , and download newest nathelper , rtpproxy form berlios cvs Makefile rev 1.6 nathelper.c rev 1.51 nathelper.cfg rev 1.2 nathelper_rtpp.cfg rev 1.1 nhelpr_funcs.c rev 1.7 nhelpr_funcs.h rev 1.2 rtpproxy main.c rev 1.17 ... ... My environment is kphone 3.14 -------> Gateway(NAT+Firewall) ----Internet----Ser + rtpproxy kphone use UDP , Symmetric Signaling and Symmetric Media , not use STUN server my ser.cfg is the same as the link (http://www.informatik.uni-bremen.de/~prelle/terena/cookbook/main/ch04s07.ht… 4.7.3.5.1. SIP Express Router mentioned) besides one line if (method == "REGISTER" || ! search("^Record-Route:")) { ===> ser said it is wrong , i don't what's wrong...? so i modify it to if (method == "REGISTER") { My question is : 1. Does the idea (http://www.informatik.uni-bremen.de/~prelle/terena/cookbook/main/ch04s07.ht… 4.7.3.5.1. SIP Express Router mentioned) work? 2. used ser 0.8.12 and only update nathelper module to newest work? Thanks Jimmy

20 years

[Serusers] help me !!!

by Kiem Hung

Now I'm trying config ser with authenticate module . Can you help me how to do this . Could you tell me step to config ser Thanks alots ________________________________________________________________________ Yahoo! Messenger - Communicate instantly..."Ping" your friends today! Download Messenger Now http://uk.messenger.yahoo.com/download/index.html

20 years

[Serusers] RE: [Serdev] Rmoving to-tags

by Jason Penton

Hi Jiri Thanks for the advice - it works perfectly now. I must say that out of the many Uas I have played with - more of them screw the tags up than less. Thanks again for the help. Cheers Jason > -----Original Message----- > From: Jiri Kuthan [mailto:jiri@iptel.org] > Sent: 01 April 2004 05:50 PM > To: Jason Penton > Subject: RE: [Serdev] Rmoving to-tags > > At 09:22 AM 4/1/2004, Jason Penton wrote: > > > >> -----Original Message----- > >> From: Jiri Kuthan [mailto:jiri@iptel.org] > >> Sent: 01 April 2004 09:17 AM > >> To: Jason Penton > >> Subject: RE: [Serdev] Rmoving to-tags > >> > >> At 09:10 AM 4/1/2004, Jason Penton wrote: > >> >Hi Jiri > >> > > >> >Yes - I have. BUT I was under the impression that the 180 RINGING > >> >response is not REQUIRED to have a to-tag i.e. to set up an > >> early dialog. > >> > > >> >Is this understanding correct? > >> > >> indeed, to-tags serve the purpose if establishing a dialog. > >> 180 does not establish any, only 183 does. > > > >So then to fix the problem I am having - I could > theoretically remove > >the to-tags from all incoming 180 RINGING responses before > forwarding > >them to the UAC and my problem should be solved. > > you could, but it sounds to me like a too terrible hack. > > >Now my second quesiton is where in > >the SER code can I do this (first assumption is in the tm module > >??????) > > now, message mangling is done in textops. You need to set up > stateful processing (t_on_reply), process replies, look at > which you wish to mangle and eventually mangle them. > > -jiri > > >

20 years

RE: [Sip-implementors] [Serdev] Re: [Serusers] Forking Proxy

by nataraju.alilaghatta＠wipro.com

Thanks, Nataraju A.B. -----Original Message----- From: sip-implementors-bounces(a)cs.columbia.edu [mailto:sip-implementors-bounces@cs.columbia.edu] On Behalf Of Juha Heinanen Sent: Thursday, April 01, 2004 2:47 PM To: Klaus Darilion Cc: serusers(a)lists.iptel.org; sip-implementors(a)cs.columbia.edu; serdev(a)lists.iptel.org Subject: [Sip-implementors] [Serdev] Re: [Serusers] Forking Proxy Klaus Darilion writes: > UA1 behaves wrong - per RFC 3261 the dialog will be established by the > 200 OK message (not by 180), therefore the to-tag from the 200 OK must > be used. klaus, can you point out the section/paragraph in rfc 3261 that tells that the to-tag from the 200 ok must be used. i scanned the document for a while i didn't find it. the closest i found is this: [ABN] the base line for to-tag handling in UAC is that the new 1xx or 2xx might match for an existing dialog or create a new dialog depending on the to-tag value. If the to-tag in 2xx matches the one in dialog block then the dialog will transitioned to confirmed state and no tag updation happens effectively same tag used in further transactions in that dialog. If the To-Tag does not match any of the existing dialogs for that call then it creates a new dialog and stored in call block then that tag will be used in further transactions in that dialog which in turn part of the call. 13.2.2 Processing INVITE Responses If the dialog identifier in the 2xx response matches the dialog identifier of an existing dialog, the dialog MUST be transitioned to the confirmed state, and the route set for the dialog MUST be recomputed based on the 2xx response using the procedures of Section 12.2.1. but it only mentions about recomputing the route set, not the rest of the dialog state. -- juha _______________________________________________ Sip-implementors mailing list Sip-implementors(a)cs.columbia.edu http://lists.cs.columbia.edu/mailman/listinfo/sip-implementors Confidentiality Notice The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain confidential or privileged information. If you are not the intended recipient, please notify the sender at Wipro or Mailadmin(a)wipro.com immediately and destroy all copies of this message and any attachments.

20 years

[Serusers] Call Parking

by Kapil Dhawan

How can i implement Call Parking Definition: Call parking allows you to park a call and pick it up at another location. Lets say 111 dialed 222 and now 222 somehow parked the call using some dial code (e.g 150) and now 222 can reach any other phone and can pick up the call by dialing call parking answer code (e.g. 151) + extension from where he parked.... How can i implement it in SER. is it already there... _________________________________________________________________ Easiest Money Transfer to India. Send Money To 6000 Indian Towns. http://go.msnserver.com/IN/42198.asp Easiest Way To Send Money Home!

20 years

[Serusers] Re: SER and Asterisk problem

by Welesley Sibelson Dias

put notransfer=yes into asterisk e don't work I see the SER log e receive this message t_reply: ACKs are not replied. On Wed, 2004-03-31 at 15:48, Welesley Sibelson Dias wrote: > Hi All. > I'am using Asterisk with SER. I can make call between two internal VoIP > gateways or from na internal to external VoIP gateway. But when I get a > external call, this call hang ups 5 seconds after and I reveive the > following messages > > *CLI> -- Executing Dial("SIP/16008-3d17", > "SIP/16007&SIP/16006|20|tr") in new stack > -- Called 16007 > -- Called 16006 > -- SIP/16007-8c24 is ringing > -- SIP/16007-8c24 answered SIP/16008-3d17 > -- Attempting native bridge of SIP/16008-3d17 and SIP/16007-8c24 Mar > 30 13:53:11 WARNING[1125685952]: chan_sip.c:495 > retrans_pkt: Maximum retries exceeded on call > 2eb06a983415436d4f2845a44dd9df5a(a)192.168.0.252 for seqno 102 > (Request) > Mar 30 13:53:12 WARNING[1125685952]: chan_sip.c:495 > retrans_pkt: Maximum retries exceeded on call > 2eb06a983415436d4f2845a44dd9df5a(a)192.168.0.252 for seqno 102 > (Request) > Mar 30 13:53:12 WARNING[1125685952]: chan_sip.c:495 > retrans_pkt: Maximum retries exceeded on call > D9A3-E113-71478237A5B7568-7@Octtel for seqno 8 (Response) > =3D=3D Spawn extension (sip, 1000, 1) exited non-zero on > 'SIP/16008-3d17' > Jadylson da Rocha Passos Bomfim > > > Redevox Telecom > > Uberlandia +55 34 3234-7813 > > S=E3o Paulo +55 11 5055-6888 > > M=F3vel +55 34 9103-6854 > >

20 years

[Serusers] NAT and multiple proxy

by zeusng

Consider the following scenario: UA---NAT---Proxy1---Proxy2+UsrLoc User agent UA is behind NAT which send a REGISTER request to Proxy2 but was instructed to use Proxy1 as the first hub. Which of the two proxies should rewrite the contact header. Note that Proxy1 does nothing but to forward all requests to Proxy2, something like: Route[0] { check (max_forward_header & message_len); record_route(); rewritehostport(proxy2:port); t_relay(); } Zeus Ng

20 years

[Serusers] ser -ED option is not working

by siva kumar

hi friends, my ser -ED option is not working,that means when i am using /etc/ser/ser start is working and my phone is regisrered.but when i am usning "ser -ED" phone is not connecting. plz. tell me what's the problem.before using i used ser -f = ser.cfg also at /etc/ser. thank u _________________________________________________________________ Apply to 50,000 jobs now. http://go.msnserver.com/IN/45531.asp Post your CV on naukri.com today.

20 years

[Serusers] question about domain name

by zhou jie

Hi, i don't know if it is a bug in ser. I found if i use domain (realm) name with minus char "-", UA can not rigister correctly. i.e. if realm=xx.xx-xxx.xx it can not register. but without "-" it works fine. zhou

20 years

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users April 2004