sr-users March 2004

sr-users@lists.kamailio.org

145 participants
286 discussions

by Shirley

Hi, Thank you for the reply. Do you use before using UA behind Symmetric NAT to make to the other UA behind Symmetric NAT? As I am doing this, but there is no audio. I have attached the ser.cfg. Please kindly advise have been a long problem already.Thank u!! <<ser.cfg>> Regards, Shirley > -----Original Message----- > From: Patrick Muldoon [SMTP:doon@inoc.net] > Sent: Saturday, March 06, 2004 11:42 AM > To: serusers(a)lists.iptel.org > Subject: Re: [Serusers] No Audio > > On Friday 05 March 2004 10:24 pm, Shirley wrote: > > Hi , > > > > I am using UA1 to UA2. Looking at the Ethereal I have this Broadcast > > message and there is no audio transmitted. > > <"Protocol: ARP , who has 192.168.0.177? Tell 192.168.0.142 > Do anyone > > have this before? Please help? > > > > regards, > > shirley > > arp = Address Resolution Protocol. It is how hosts on the same layer 2 > network find each other. So basically 192.168.0.177 is looking for the > MAC > address of 192.168.0.142. This is normal. > > -:Patrick > > -- > Patrick Muldoon > Network/Software Engineer > INOC (http://www.inoc.net) > PGPKEY (http://www.inoc.net/~doon) > Key ID: 0x370D752C > > Beware of programmers who carry screwdrivers. - Leonard Brandwein > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers

20 years, 2 months

[Serusers] ALG mode [Fwd: [Serdev] CVS:commitlog: sip_router/modules/nathelper Makefile nathelper.c sip_router/modules/nathelper/examples alg.cfg]

by Maxim Sobolev

Folks, I've just committed large code drop, which adds support for so-called "bridge" rtpproxy mode. In this mode, rtpproxy/ser can bridge two non-routable networks, such as for example LAN and WAN, or IPv4 and IPv6*. I've also added small config script which illustrates how this feature can be used. Both fresh cvs version of rtpproxy and fresh cvs version of nathelper are required for this functionality to work. In the same commit, I've added support for remotely controling rtpproxy running on a separate machine, see rtpproxy/README.remote file for details. Code has been only very lightly tested so that please let me know if there are any problems. -Maxim *) IPv4<->IPv6 bridging is not finished yet, but I plan to finish it in few days. -------- Original Message -------- Subject: [Serdev] CVS:commitlog: sip_router/modules/nathelper Makefile nathelper.c sip_router/modules/nathelper/examples alg.cfg Date: Sat, 6 Mar 2004 21:43:06 +0100 From: Maxim Sobolev <sobomax(a)portaone.com> To: serdev(a)lists.iptel.org sobomax 2004/03/06 21:43:06 CET SER CVS Repository Modified files: modules/nathelper Makefile nathelper.c Added files: modules/nathelper/examples alg.cfg Log: - support for the brand-new remote control mode in RTP proxy; - make bridge mode working in all directions; - provide a sample config for the SIP/RTP ALG (application level SIP/RTP gateway); - don't call freeaddrinfo() function if getaddrinfo() has returned an error. Revision Changes Path 1.5 +2 -2 sip_router/modules/nathelper/Makefile http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/modules/nathelper/… 1.1 +104 -0 sip_router/modules/nathelper/examples/alg.cfg (new) http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/modules/nathelper/… 1.43 +229 -61 sip_router/modules/nathelper/nathelper.c http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/modules/nathelper/… _______________________________________________ Serdev mailing list serdev(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serdev

20 years, 2 months

Re: [Serusers] forward

by Kapil Dhawan

Hi I am able to do it....by creating a new variable with sip_msg structure like flag....and now i able to do the things...thx alot Regards Dhawan K

20 years, 2 months

[Serusers] blocked extension

by Content Filter

This message was created automatically by mail delivery software. Delivery failed for the following recipients(s): morghanne(a)am1500.com The message you sent contained an attachment which the recipient has chosen to block. Usually these sort of attachments are blocked to prevent malicious software from being sent to the recipient in question. The name(s) of the blocked file(s) follow: news.htm.pif To send this file, please place it in a compressed archive using WinZip (http://www.winzip.com) or the archive software of your choice. ----- Original Message Header ----- Received: by mail12-red (MessageSwitch) id 1078549902168179_30704; Sat, 6 Mar 2004 05:11:41 +0000 (UCT) Received: from am1500.com (205.158.33.178.ptr.us.xo.net [205.158.33.178]) by mail12-red.bigfish.com (Postfix) with ESMTP id 2A87E1701A3 for <morghanne(a)am1500.com>; Sat, 6 Mar 2004 05:10:59 +0000 (UCT) From: serusers(a)lists.iptel.org To: morghanne(a)am1500.com Subject: I don't know your document! Date: Fri, 5 Mar 2004 23:11:06 -0600 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_0000_0000254A.000062AC" X-Priority: 3 X-MSMail-Priority: Normal Message-Id: <20040306051059.2A87E1701A3(a)mail12-red.bigfish.com>

20 years, 2 months

[Serusers] No Audio

by Shirley

Hi , I am using UA1 to UA2. Looking at the Ethereal I have this Broadcast message and there is no audio transmitted. <"Protocol: ARP , who has 192.168.0.177? Tell 192.168.0.142 > Do anyone have this before? Please help? regards, shirley

20 years, 2 months

[Serusers] Re: [Serdev] CVS Tarball

by Atle Samuelsen

What about this link ? http://cvs.berlios.de/cvstarballs/projectname-cvsroot.tar.gz. it was in a early\er mail when with webcvs as a subject or something * giAndrea <news(a)giandrea.com> [040305 16:44]: > At 16.34 05/03/2004 +0100, you wrote: > >This feature was disbaled after problems with the file integrity. You have > >to checkout using cvs. > > > >Klaus > > uh, i've tried using this command: > > export CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/ser > cvs login > > when I press enter for password, it wait 2 minutes more or less and after > them it says me > > failed: Connection timed out > > any suggest? > > > >giAndrea wrote: > >>Hi > >>i can't find CVS Tarball on berliOS site, why? Where can I download last > >>CVS version of sip_router? > >>bye, Andrea > >> > >>_______________________________________________ > >>Serdev mailing list > >>serdev(a)lists.iptel.org > >>http://lists.iptel.org/mailman/listinfo/serdev > > > > _______________________________________________ > Serdev mailing list > serdev(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serdev >

20 years, 2 months

[Serusers] Aliases

by giAndrea

Hi guys, why when I try to insert an alias i can see this: [root@webby root]# serctl alias add 3330003 sip:giandrea@sip.quellidelpirana.it sip:giandrea@sip.quellidelpirana.it 400 Table 'aliases' not found in memory, use save("aliases") or lookup("aliases") in the configuration script first bye, Andrea

20 years, 2 months

[Serusers] SER with Trabas billing

by Adil Laari

Hello, We are in the process of implementing a solution with SER/MYSQL/TRABAS billing. We might need some help throughout the project, so if you have experience dealing these components or an alternate billing system, you help will be apreaciate. please let me know alaari(a)intouchnetworks.ca Thanks

20 years, 2 months

[Serusers] Serweb does not match serweb tables fields

by Gregory D. Burns

Guys, I have ser-0.8.12 installed. It has the subscriber table (show below) with USER_ID instead on username, and REALM instead domain. I tried to get the lastest from CVS, but it still does not match the table layout of ser. Is there a ver of serweb that will work with ser.0.8.12? TABLE subscriber ( phplib_id varchar(32) NOT NULL default '', USER_ID varchar(100) NOT NULL default '', PASSWORD varchar(25) NOT NULL default '', FIRST_NAME varchar(25) NOT NULL default '', LAST_NAME varchar(45) NOT NULL default '', PHONE varchar(15) NOT NULL default '', EMAIL_ADDRESS varchar(50) NOT NULL default '', DATETIME_CREATED datetime NOT NULL default '0000-00-00 00:00:00', DATETIME_MODIFIED datetime NOT NULL default '0000-00-00 00:00:00', confirmation varchar(64) NOT NULL default '', flag char(1) NOT NULL default 'o', SendNotification varchar(50) NOT NULL default '', Greeting varchar(50) NOT NULL default '', HA1 varchar(128) NOT NULL default '', REALM varchar(128) NOT NULL default '', ha1b varchar(128) NOT NULL default '', perms varchar(32) default NULL, allow_find char(1) NOT NULL default '0', timezone varchar(128) default NULL, UNIQUE KEY USER_ID (USER_ID), UNIQUE KEY phplib_id (phplib_id), KEY USER_ID_2 (USER_ID) -Greg

20 years, 2 months

[Serusers] NAThelper Module

by Shirley

Hi, Like to check the NAThelper module with RTPProxy in version rel_8.0.12. How many kinds of firewall can this module go through? As i am testing out the module and having problem in connecting through Symmetric Network to Symmetric Network? There is no audio but the ringing go through. Can anyone kindly advise? Thanks..... regards, Shirley

20 years, 2 months

← Newer
1
...
21
22
23
24
25
26
27
28
29
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users March 2004