sr-users March 2004

sr-users@lists.kamailio.org

145 participants
286 discussions

[Serusers] how to catch in-dialog INVITEs to NATed user?

by Klaus Darilion

Hi! I just came along a problem in the following scenario: user with public IP calls a NATed user. The first INVITE causes a lookup("location") which also sets the natflag (usually flag 6). Then I check if flag 6 is set and will force the RTP proxy if it is set. If the public client sends an in-dialog reINVITE, the reINVITE is processed by the loose_route block and there is no lookup("location") for those request. So, how can I find out that the request will be forwarded to a NATed user (to force the RTP proxy)? regards, Klaus

20 years, 3 months

[Serusers] issues with bindings

by goddess hekate

Hello, Two times in the past week I have had some issues with the bindings of the sip mapping expiring: Binding 'user','sip:user@x.x.x.x:5060' has expired Does anyone know what this is and why it happens? I appreciate any input you may have. Thanks, Hekate _________________________________________________________________ All the action. All the drama. Get NCAA hoops coverage at MSN Sports by ESPN. http://msn.espn.go.com/index.html?partnersite=espn

20 years, 3 months

Re: [Serusers] outgoing calls with alias

by Jiri Kuthan

Aliases have impact only on incoming calls, they don't mangle outgoing signaling. They just rewrite r-uri, that's all they do. To set callerid down in pstn, use rpid. -jiri At 05:42 PM 3/22/2004, Ralph.Wabel(a)swisscom.com wrote: >Content-class: urn:content-classes:message >Content-Type: multipart/alternative; > boundary="----_=_NextPart_001_01C4102C.A43065FC" > >Hi, > >I have the problem that when I make an outgoing call over a Cisco Gateway to a PSTN phone. I�ve defined an alias for the user, works fine for incoming calls, but for the outgoing calls it shows always the number of the main number of the number block. When I make a debug I see that it goes out with the username instead of the alias. Here is my ser.cfg, maybe I�ve done something wrong in the config file. If someone could help me it would be great. Let me know if the config from the Cisco Gateway is also important.

20 years, 3 months

FW: [Serusers] Radius client - ldconfig not adding the libarry

by Morris, Scott

Jan, Any ideas on this? Scott Morris Enterprise Network Engineer DOE - ORAU / ORISE 865-576-4672 -----Original Message----- From: Morris, Scott Sent: Thursday, March 18, 2004 2:38 PM To: serusers(a)lists.iptel.org Subject: [Serusers] Radius client - ldconfig not adding the libarry I installed the radiusclient 0.4.1, and ran into a slight problem. I run ldconfig -v /usr/local/lib and the following is output: /usr/local/lib: libradiusclient.so.2 -> libradiusclient.so.2.0.0 Here is the directory of /usr/local/lib -rw-r--r-- 1 root root 130780 Mar 18 12:37 libradiusclient.a -rwxr-xr-x 1 root root 853 Mar 18 12:37 libradiusclient.la lrwxrwxrwx 1 root root 24 Mar 18 12:37 libradiusclient.so -> libradiusclient.so.2.0.0 lrwxrwxrwx 1 root root 24 Mar 18 12:37 libradiusclient.so.2 -> libradiusclient.so.2.0.0 -rwxr-xr-x 1 root root 95088 Mar 18 12:37 libradiusclient.so.2.0.0 Ldconfig will not process the libradiusclient.so because it is a symbolic link. So when I run "ser -ddddddddd start" I get the following: 0(7710) ERROR: load_module: could not open module </usr/lib/ser/modules/auth_radius.so>: libradiusclient.so.0: cannot open shared object file: No such file or directory Ser can't locate the reference for libradiusclient.so.0 since ldconfig won't process the link libradius.so.0. Any ideas of getting around this. I checked the man pages for ldconfig, and it states it does not process symbolic links: "ldconfig ignores symbolic links when scanning for libraries." Scott Morris Enterprise Network Engineer DOE - ORAU / ORISE 865-576-4672 _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

20 years, 3 months

[Serusers] rewrite contact header

by Muhammad Nasim

Which function should I use to rewrite the contact header? Is this possible? I have SER version 0.8.12

20 years, 3 months

Re: [Serusers] serweb problem

by gaillac harry

I change serweb php files, add lookup("aliases") to /etc/ser/ser.cfg it's ok but I have a problem with my user account page Warning: Invalid argument supplied for foreach() in /var/www/virtual/02/html/page.php on line 158 Warning: Invalid argument supplied for foreach() in /var/www/virtual/02/html/page.php on line 161 ################################################## foreach($config->enable_tabs as $i => $value) if ($value) $lasttab=$i; foreach($config->enable_tabs as $i => $value){ if ($value){ #################################################### Harry Le lun 22/03/2004 à 18:31, Atle Samuelsen a écrit : > Without any config files and error messages it's hard to know what the > exact problem is.. but if I guess right, your fifo buffer > (/tmp/ser_fifo) has the wrong chmod. try to set fifo_mode in your ser > config. > > - AtlE > * gaillac harry <gaillacharry(a)yahoo.fr> [040322 17:13]: > > hello, > > > > i have a problem with serweb registration. my apache server is > > configured with User apache Group root because of /tmp/ser_fifo > > permissions but when i try to confirme my account ser or apache failed, > > nothing is going on ???? > > > > Harry > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > >

20 years, 3 months

[Serusers] voicemail

by Eugene Babchin

Hello, I'm trying to test sems. Where can I find config examples or any guide or how-to? Thank you, Eugene.

20 years, 3 months

Re: [Serusers] SER Notify

by Kapil Dhawan

ok great let me check it >From: Klaus Darilion <klaus.mailinglists(a)pernau.at> >To: Kapil Dhawan <sersavvy(a)hotmail.com>,Serusers <serusers(a)lists.iptel.org> >Subject: Re: [Serusers] SER Notify >Date: Mon, 22 Mar 2004 16:17:16 +0100 > >You can use the OPTIONS method to find out if a user is available or not. > >More details can be found in the SIP standard: RFC 3261 > >regards, >klaus > >Kapil Dhawan wrote: >>na its not clear to me..pls write atleast a line or two >> >> >>>From: Klaus Darilion <klaus.mailinglists(a)pernau.at> >>>To: Kapil Dhawan <sersavvy(a)hotmail.com> >>>CC: serusers(a)lists.iptel.org >>>Subject: Re: [Serusers] SER Notify >>>Date: Mon, 22 Mar 2004 15:38:34 +0100 >>> >>>not NOTIFY, but OPTIONS. >>> >>>Klaus >>> >>>Kapil Dhawan wrote: >>> >>>>is there any way i can check the status of a user by sending some >>>>request from the server....like some NOTIFY kid of thing ...and come to >>>>know the status of user whether he is busy with some call or anything >>>>like...... >>>> >>>>regards >>>> >>>>_________________________________________________________________ >>>>Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag >>>>Only on www.shaadi.com. Register now! >>>> >>>>_______________________________________________ >>>>Serusers mailing list >>>>serusers(a)lists.iptel.org >>>>http://lists.iptel.org/mailman/listinfo/serusers >>>> >>>> >>> >> >>_________________________________________________________________ >>Easiest Money Transfer to India. Send Money To 6000 Indian Towns. >>http://go.msnserver.com/IN/42198.asp Easiest Way To Send Money Home! >> >> > _________________________________________________________________ Easiest Money Transfer to India. Send Money To 6000 Indian Towns. http://go.msnserver.com/IN/42198.asp Easiest Way To Send Money Home!

20 years, 3 months

[Serusers] outgoing calls with alias

by Ralph.Wabel＠swisscom.com

Hi, I have the problem that when I make an outgoing call over a Cisco Gateway to a PSTN phone. I've defined an alias for the user, works fine for incoming calls, but for the outgoing calls it shows always the number of the main number of the number block. When I make a debug I see that it goes out with the username instead of the alias. Here is my ser.cfg, maybe I've done something wrong in the config file. If someone could help me it would be great. Let me know if the config from the Cisco Gateway is also important. # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=no #log_stderror=yes # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" fifo_mode=0666 alias="swissptt.ch" alias="inoitasip.swissptt.ch" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" "/etc/ser/ser.cfg" 138L, 3639C modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # attempt handoff to PSTN if (uri=~"^sip:0[0-9]*@inoitasip.swissptt.ch") { ## This assumes that the caller is log("Forwarding to PSTN\n"); ## registered in our realm t_relay_to_udp("193.5.228.202", "5060"); ## Our Cisco router break; forward( 193.5.228.202, 5060 ); break; forward( 193.5.228.202, 5060 ); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri=~inoitasip.swissptt.ch) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("inoitasip.swissptt.ch", "subscriber")) { www_challenge("inoitasip.swissptt.ch", "0"); break; }; save("location"); break; }; #needed for alias lookup("aliases"); # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); break; forward( 193.5.228.202, 5060 ); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri=~inoitasip.swissptt.ch) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("inoitasip.swissptt.ch", "subscriber")) { www_challenge("inoitasip.swissptt.ch", "0"); break; }; save("location"); break; }; #needed for alias lookup("aliases"); # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } Thanks Ralph

20 years, 3 months

[Serusers] serweb problem

by gaillac harry

hello, i have a problem with serweb registration. my apache server is configured with User apache Group root because of /tmp/ser_fifo permissions but when i try to confirme my account ser or apache failed, nothing is going on ???? Harry

20 years, 3 months

← Newer
1
...
10
11
12
13
14
15
16
...
29
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users March 2004