sr-users February 2004

sr-users@lists.kamailio.org

144 participants
382 discussions

[Serusers] DNS SRV
by Toni Barata 25 Feb '04

25 Feb '04

Hi All, In case we pretend to proxy the messages from SER to multiple Media Servers, it is possible to use DNS SRV for load balancing and fault tolerance? We have already one implementation of load balancing e fault tolerance for SER (using DNS SRV) but now we want to implement the same configuration for ours Media Servers. Best regards, Toni

1 0

Re: [Serusers] SER + SEMS
by Kapil Dhawan 25 Feb '04

25 Feb '04

pls check http://203.196.128.126/ser_log http://203.196.128.126/sems_log >From: "Raphael Coeffic" <rco(a)iptel.org> >To: "Kapil Dhawan" <sersavvy(a)hotmail.com> >CC: <sems(a)lists.iptel.org> >Subject: Re: [Serusers] SER + SEMS >Date: Wed, 25 Feb 2004 14:49:03 +0100 > > >I still need the complete Ser log file! >It looks like Ser's vm module is sending one EOL to much... i have to look >at the logs to see if i'm right. >Are u using Ser 0.8.12 or head version? > >-Raphael. > >----- Original Message ----- >From: "Kapil Dhawan" <sersavvy(a)hotmail.com> >To: <rco(a)iptel.org> >Cc: <serusers(a)lists.iptel.org> >Sent: Wednesday, February 25, 2004 2:02 PM >Subject: Re: [Serusers] SER + SEMS > > > > shit > > i just changed the ser.cfg it was this before > > > > http://203.196.128.126/ser.cfg (imean voicemail instead of announcement, >i > > was just checking ann.. feature that is the error coming for thatb >also...) > > > > > > next is regarding log file for sems...it comtains an error where it >doesn't > > find the correct fifo version after finishing some tasks..... > > > > wrong FIFO Interface version > > > > look for the above mentioned error you will definitely get it > > > > i got this ....(12282) ERROR: run (AmServer.cpp:194): wrong FIFO >Interface > > version. > > on searching http://203.196.128.126/kapils_sems.txt > > > > pls recheck..... > > > > > > > > >From: "Raphael Coeffic" <rco(a)iptel.org> > > >To: "Kapil Dhawan" <sersavvy(a)hotmail.com> > > >CC: <serusers(a)lists.iptel.org> > > >Subject: Re: [Serusers] SER + SEMS > > >Date: Wed, 25 Feb 2004 12:45:32 +0100 > > > > > >Hi, > > > > > >i can't make any diagnostic with the files you pointed at: > > >- sems log file doesn't show any error. > > >- ser.cfg does not include any redirect to voicemail (only > > >announcement...). > > > > > >-Raphael. > > > > > >----- Original Message ----- > > >From: "Kapil Dhawan" <sersavvy(a)hotmail.com> > > >To: <rco(a)iptel.org> > > >Cc: <serusers(a)lists.iptel.org> > > >Sent: Wednesday, February 25, 2004 7:12 AM > > >Subject: Re: [Serusers] SER + SEMS > > > > > > > > > > I hope the problem is not with SEMS, rather it is in my ser.cfg...i >am > > > > pasting my ser.cfg also > > > > > > > > http://203.196.128.126/ser.cfg > > > > > > > > >From: "Raphael Coeffic" <rco(a)iptel.org> > > > > >To: "Kapil Dhawan" <sersavvy(a)hotmail.com> > > > > >CC: <sems(a)lists.iptel.org> > > > > >Subject: Re: [Serusers] SER + SEMS > > > > >Date: Wed, 25 Feb 2004 00:47:31 +0100 > > > > > > > > > >Hi, > > > > > > > > > >could you send ser+sems log (complete, not only the part reporting >the > > > > >problem)? > > > > > > > > > >-Raphael. > > > > > > > > > >----- Original Message ----- > > > > >From: "Kapil Dhawan" <sersavvy(a)hotmail.com> > > > > >To: <rco(a)iptel.org> > > > > >Cc: <serusers(a)lists.iptel.org> > > > > >Sent: Tuesday, February 24, 2004 1:56 PM > > > > >Subject: Re: [Serusers] SER + SEMS > > > > > > > > > > > > > > > > > > > > > > Hi this is where error is coming > > > > > > mail is going perfect but in the mean time... > > > > > > > > > > > > (4897) DEBUG: run (AmServer.cpp:165): version= <> > > > > > > (4897) ERROR: run (AmServer.cpp:194): wrong FIFO Interface >version. > > > > > > > > > > > > this is coming which is stopping my sems and ser combination to >stop > > > > > > > > > > > > (5018) DEBUG: openReplyFifo (AmRequest.cpp:362): flags=800 > > > > > > (5018) DEBUG: openReplyFifo (AmRequest.cpp:364): flags=0 > > > > > > (5018) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: > > > > >completed > > > > > > (5018) DEBUG: getReturnCode (AmRequest.cpp:400): Waiting for Ser >to > > > > >respond > > > > > > to t > > > > > > he FIFO request... > > > > > > (4897) DEBUG: run (AmServer.cpp:165): version= <> > > > > > > (4897) ERROR: run (AmServer.cpp:194): wrong FIFO Interface >version. > > > > > > (5018) DEBUG: getReturnCode (AmRequest.cpp:421): response from >Ser: > > >200 > > > > > > fifo_t_r > > > > > > eply succeeded > > > > > > (5018) DEBUG: getReturnCode (AmRequest.cpp:442): n_cmd.from_uri= ><> > > > > > > (5018) DEBUG: getReturnCode (AmRequest.cpp:445): n_cmd.next_hop= ><> > > > > > > (5018) DEBUG: getReturnCode (AmRequest.cpp:448): n_cmd.route= <> > > > > > > (5018) DEBUG: sendToFIFO (AmRequest.cpp:216): sendToFifo returns > > > > > > ret=getReturnCo > > > > > > de=0 > > > > > > (5018) DEBUG: setRAddr (AmRtpStream.cpp:313): RTP remote address >set > > >to > > > > > > 203.196. > > > > > > 128.122:54321 > > > > > > (5018) DEBUG: run (AmSession.cpp:141): Sending Rtp data to > > > > > > 203.196.128.122/54321 > > > > > > (5018) DEBUG: onSessionStart (AnswerMachine.cpp:139): starting > > >sending > > > > > > announce. > > > > > > ..(/usr/local/lib/sems/audio/default.wav) > > > > > > > > > > > > > > > > > > >From: "Raphael Coeffic" <rco(a)iptel.org> > > > > > > >To: "Kapil Dhawan" <sersavvy(a)hotmail.com> > > > > > > >Subject: Re: [Serusers] SER + SEMS > > > > > > >Date: Tue, 24 Feb 2004 13:16:52 +0100 > > > > > > > > > > > > > >Hi! > > > > > > > > > > > > > > > CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/sems > > > > > > > > export CVSROOT > > > > > > > > cvs co answer_machine > > > > > > > > > > > > > >you should use instead 'cvs co -r ser_rel_0_8_12 >answer_machine'. > > > > > > > > > > > > > > > CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/ser > > > > > > > > export CVSROOT > > > > > > > > cvs co -r rel_0_8_12 sip_router > > > > > > > > > > > > > >Both command work same if you type the CVSROOT as -d parameter >as >i > > > > >wrote > > > > > > >to > > > > > > >you. It's then important to type it as ONE line. > > > > > > >(every thing on the same cmd line: > > > > > > >'cvs -d:pserver:anonymous@cvs.berlios.de:/cvsroot/sems co -r > > > > >ser_rel_0_8_12 > > > > > > >answer_machine') > > > > > > > > > > > > > >-Raphael. > > > > > > > > > > > > > > > > > > > >_________________________________________________________________ > > > > > > INDIA TODAY @ Rs. 5 for 5 years ! > > > > > > > > >http://www.indiatoday.com/itoday/intlsubscription/itsubs/it_offer.html > > > > > > Subcribe Now ... > > > > > > > > > > > > _______________________________________________ > > > > > > Serusers mailing list > > > > > > serusers(a)lists.iptel.org > > > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > _________________________________________________________________ > > > > Post Classifieds on MSN classifieds. > > >http://www.sulekha.com/msnclassifieds > > > > Buy and Sell on MSN Classifieds. > > > > > > > > _______________________________________________ > > > > Serusers mailing list > > > > serusers(a)lists.iptel.org > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > _________________________________________________________________ > > Masterpieces made affordable! Buy art prints. > > http://go.msnserver.com/IN/42736.asp MSN Shopping. > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > _________________________________________________________________ Post Classifieds on MSN classifieds. http://www.sulekha.com/msnclassifieds Buy and Sell on MSN Classifieds.

1 0

Re: [Serusers] SER + SEMS
by Kapil Dhawan 25 Feb '04

25 Feb '04

i am using Ser 0.8.12 let me generate ser log file also regards >From: "Raphael Coeffic" <rco(a)iptel.org> >To: "Kapil Dhawan" <sersavvy(a)hotmail.com> >CC: <sems(a)lists.iptel.org> >Subject: Re: [Serusers] SER + SEMS >Date: Wed, 25 Feb 2004 14:49:03 +0100 > > >I still need the complete Ser log file! >It looks like Ser's vm module is sending one EOL to much... i have to look >at the logs to see if i'm right. >Are u using Ser 0.8.12 or head version? > >-Raphael. > >----- Original Message ----- >From: "Kapil Dhawan" <sersavvy(a)hotmail.com> >To: <rco(a)iptel.org> >Cc: <serusers(a)lists.iptel.org> >Sent: Wednesday, February 25, 2004 2:02 PM >Subject: Re: [Serusers] SER + SEMS > > > > shit > > i just changed the ser.cfg it was this before > > > > http://203.196.128.126/ser.cfg (imean voicemail instead of announcement, >i > > was just checking ann.. feature that is the error coming for thatb >also...) > > > > > > next is regarding log file for sems...it comtains an error where it >doesn't > > find the correct fifo version after finishing some tasks..... > > > > wrong FIFO Interface version > > > > look for the above mentioned error you will definitely get it > > > > i got this ....(12282) ERROR: run (AmServer.cpp:194): wrong FIFO >Interface > > version. > > on searching http://203.196.128.126/kapils_sems.txt > > > > pls recheck..... > > > > > > > > >From: "Raphael Coeffic" <rco(a)iptel.org> > > >To: "Kapil Dhawan" <sersavvy(a)hotmail.com> > > >CC: <serusers(a)lists.iptel.org> > > >Subject: Re: [Serusers] SER + SEMS > > >Date: Wed, 25 Feb 2004 12:45:32 +0100 > > > > > >Hi, > > > > > >i can't make any diagnostic with the files you pointed at: > > >- sems log file doesn't show any error. > > >- ser.cfg does not include any redirect to voicemail (only > > >announcement...). > > > > > >-Raphael. > > > > > >----- Original Message ----- > > >From: "Kapil Dhawan" <sersavvy(a)hotmail.com> > > >To: <rco(a)iptel.org> > > >Cc: <serusers(a)lists.iptel.org> > > >Sent: Wednesday, February 25, 2004 7:12 AM > > >Subject: Re: [Serusers] SER + SEMS > > > > > > > > > > I hope the problem is not with SEMS, rather it is in my ser.cfg...i >am > > > > pasting my ser.cfg also > > > > > > > > http://203.196.128.126/ser.cfg > > > > > > > > >From: "Raphael Coeffic" <rco(a)iptel.org> > > > > >To: "Kapil Dhawan" <sersavvy(a)hotmail.com> > > > > >CC: <sems(a)lists.iptel.org> > > > > >Subject: Re: [Serusers] SER + SEMS > > > > >Date: Wed, 25 Feb 2004 00:47:31 +0100 > > > > > > > > > >Hi, > > > > > > > > > >could you send ser+sems log (complete, not only the part reporting >the > > > > >problem)? > > > > > > > > > >-Raphael. > > > > > > > > > >----- Original Message ----- > > > > >From: "Kapil Dhawan" <sersavvy(a)hotmail.com> > > > > >To: <rco(a)iptel.org> > > > > >Cc: <serusers(a)lists.iptel.org> > > > > >Sent: Tuesday, February 24, 2004 1:56 PM > > > > >Subject: Re: [Serusers] SER + SEMS > > > > > > > > > > > > > > > > > > > > > > Hi this is where error is coming > > > > > > mail is going perfect but in the mean time... > > > > > > > > > > > > (4897) DEBUG: run (AmServer.cpp:165): version= <> > > > > > > (4897) ERROR: run (AmServer.cpp:194): wrong FIFO Interface >version. > > > > > > > > > > > > this is coming which is stopping my sems and ser combination to >stop > > > > > > > > > > > > (5018) DEBUG: openReplyFifo (AmRequest.cpp:362): flags=800 > > > > > > (5018) DEBUG: openReplyFifo (AmRequest.cpp:364): flags=0 > > > > > > (5018) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: > > > > >completed > > > > > > (5018) DEBUG: getReturnCode (AmRequest.cpp:400): Waiting for Ser >to > > > > >respond > > > > > > to t > > > > > > he FIFO request... > > > > > > (4897) DEBUG: run (AmServer.cpp:165): version= <> > > > > > > (4897) ERROR: run (AmServer.cpp:194): wrong FIFO Interface >version. > > > > > > (5018) DEBUG: getReturnCode (AmRequest.cpp:421): response from >Ser: > > >200 > > > > > > fifo_t_r > > > > > > eply succeeded > > > > > > (5018) DEBUG: getReturnCode (AmRequest.cpp:442): n_cmd.from_uri= ><> > > > > > > (5018) DEBUG: getReturnCode (AmRequest.cpp:445): n_cmd.next_hop= ><> > > > > > > (5018) DEBUG: getReturnCode (AmRequest.cpp:448): n_cmd.route= <> > > > > > > (5018) DEBUG: sendToFIFO (AmRequest.cpp:216): sendToFifo returns > > > > > > ret=getReturnCo > > > > > > de=0 > > > > > > (5018) DEBUG: setRAddr (AmRtpStream.cpp:313): RTP remote address >set > > >to > > > > > > 203.196. > > > > > > 128.122:54321 > > > > > > (5018) DEBUG: run (AmSession.cpp:141): Sending Rtp data to > > > > > > 203.196.128.122/54321 > > > > > > (5018) DEBUG: onSessionStart (AnswerMachine.cpp:139): starting > > >sending > > > > > > announce. > > > > > > ..(/usr/local/lib/sems/audio/default.wav) > > > > > > > > > > > > > > > > > > >From: "Raphael Coeffic" <rco(a)iptel.org> > > > > > > >To: "Kapil Dhawan" <sersavvy(a)hotmail.com> > > > > > > >Subject: Re: [Serusers] SER + SEMS > > > > > > >Date: Tue, 24 Feb 2004 13:16:52 +0100 > > > > > > > > > > > > > >Hi! > > > > > > > > > > > > > > > CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/sems > > > > > > > > export CVSROOT > > > > > > > > cvs co answer_machine > > > > > > > > > > > > > >you should use instead 'cvs co -r ser_rel_0_8_12 >answer_machine'. > > > > > > > > > > > > > > > CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/ser > > > > > > > > export CVSROOT > > > > > > > > cvs co -r rel_0_8_12 sip_router > > > > > > > > > > > > > >Both command work same if you type the CVSROOT as -d parameter >as >i > > > > >wrote > > > > > > >to > > > > > > >you. It's then important to type it as ONE line. > > > > > > >(every thing on the same cmd line: > > > > > > >'cvs -d:pserver:anonymous@cvs.berlios.de:/cvsroot/sems co -r > > > > >ser_rel_0_8_12 > > > > > > >answer_machine') > > > > > > > > > > > > > >-Raphael. > > > > > > > > > > > > > > > > > > > >_________________________________________________________________ > > > > > > INDIA TODAY @ Rs. 5 for 5 years ! > > > > > > > > >http://www.indiatoday.com/itoday/intlsubscription/itsubs/it_offer.html > > > > > > Subcribe Now ... > > > > > > > > > > > > _______________________________________________ > > > > > > Serusers mailing list > > > > > > serusers(a)lists.iptel.org > > > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > _________________________________________________________________ > > > > Post Classifieds on MSN classifieds. > > >http://www.sulekha.com/msnclassifieds > > > > Buy and Sell on MSN Classifieds. > > > > > > > > _______________________________________________ > > > > Serusers mailing list > > > > serusers(a)lists.iptel.org > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > _________________________________________________________________ > > Masterpieces made affordable! Buy art prints. > > http://go.msnserver.com/IN/42736.asp MSN Shopping. > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > _________________________________________________________________ INDIA TODAY @ Rs. 5 for 5 years ! http://www.indiatoday.com/itoday/intlsubscription/itsubs/it_offer.html Subcribe Now ...

1 0

[Serusers] Serweb question
by Mike Fallows 25 Feb '04

25 Feb '04

I have installed serweb which seems to work. One or two oddities though. First, there is a java script file being preloaded which does not appear to be in the distribution, namely preload.js. I get a runtime error when doing a find user under the user interface, which I am guessing is because the preload.js is missing. Any ideas would be much appreciated. Mike

1 0

Re: [Serusers] SER + SEMS
by Kapil Dhawan 25 Feb '04

25 Feb '04

shit i just changed the ser.cfg it was this before http://203.196.128.126/ser.cfg (imean voicemail instead of announcement, i was just checking ann.. feature that is the error coming for thatb also...) next is regarding log file for sems...it comtains an error where it doesn't find the correct fifo version after finishing some tasks..... wrong FIFO Interface version look for the above mentioned error you will definitely get it i got this ....(12282) ERROR: run (AmServer.cpp:194): wrong FIFO Interface version. on searching http://203.196.128.126/kapils_sems.txt pls recheck..... >From: "Raphael Coeffic" <rco(a)iptel.org> >To: "Kapil Dhawan" <sersavvy(a)hotmail.com> >CC: <serusers(a)lists.iptel.org> >Subject: Re: [Serusers] SER + SEMS >Date: Wed, 25 Feb 2004 12:45:32 +0100 > >Hi, > >i can't make any diagnostic with the files you pointed at: >- sems log file doesn't show any error. >- ser.cfg does not include any redirect to voicemail (only >announcement...). > >-Raphael. > >----- Original Message ----- >From: "Kapil Dhawan" <sersavvy(a)hotmail.com> >To: <rco(a)iptel.org> >Cc: <serusers(a)lists.iptel.org> >Sent: Wednesday, February 25, 2004 7:12 AM >Subject: Re: [Serusers] SER + SEMS > > > > I hope the problem is not with SEMS, rather it is in my ser.cfg...i am > > pasting my ser.cfg also > > > > http://203.196.128.126/ser.cfg > > > > >From: "Raphael Coeffic" <rco(a)iptel.org> > > >To: "Kapil Dhawan" <sersavvy(a)hotmail.com> > > >CC: <sems(a)lists.iptel.org> > > >Subject: Re: [Serusers] SER + SEMS > > >Date: Wed, 25 Feb 2004 00:47:31 +0100 > > > > > >Hi, > > > > > >could you send ser+sems log (complete, not only the part reporting the > > >problem)? > > > > > >-Raphael. > > > > > >----- Original Message ----- > > >From: "Kapil Dhawan" <sersavvy(a)hotmail.com> > > >To: <rco(a)iptel.org> > > >Cc: <serusers(a)lists.iptel.org> > > >Sent: Tuesday, February 24, 2004 1:56 PM > > >Subject: Re: [Serusers] SER + SEMS > > > > > > > > > > > > > > Hi this is where error is coming > > > > mail is going perfect but in the mean time... > > > > > > > > (4897) DEBUG: run (AmServer.cpp:165): version= <> > > > > (4897) ERROR: run (AmServer.cpp:194): wrong FIFO Interface version. > > > > > > > > this is coming which is stopping my sems and ser combination to stop > > > > > > > > (5018) DEBUG: openReplyFifo (AmRequest.cpp:362): flags=800 > > > > (5018) DEBUG: openReplyFifo (AmRequest.cpp:364): flags=0 > > > > (5018) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: > > >completed > > > > (5018) DEBUG: getReturnCode (AmRequest.cpp:400): Waiting for Ser to > > >respond > > > > to t > > > > he FIFO request... > > > > (4897) DEBUG: run (AmServer.cpp:165): version= <> > > > > (4897) ERROR: run (AmServer.cpp:194): wrong FIFO Interface version. > > > > (5018) DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: >200 > > > > fifo_t_r > > > > eply succeeded > > > > (5018) DEBUG: getReturnCode (AmRequest.cpp:442): n_cmd.from_uri= <> > > > > (5018) DEBUG: getReturnCode (AmRequest.cpp:445): n_cmd.next_hop= <> > > > > (5018) DEBUG: getReturnCode (AmRequest.cpp:448): n_cmd.route= <> > > > > (5018) DEBUG: sendToFIFO (AmRequest.cpp:216): sendToFifo returns > > > > ret=getReturnCo > > > > de=0 > > > > (5018) DEBUG: setRAddr (AmRtpStream.cpp:313): RTP remote address set >to > > > > 203.196. > > > > 128.122:54321 > > > > (5018) DEBUG: run (AmSession.cpp:141): Sending Rtp data to > > > > 203.196.128.122/54321 > > > > (5018) DEBUG: onSessionStart (AnswerMachine.cpp:139): starting >sending > > > > announce. > > > > ..(/usr/local/lib/sems/audio/default.wav) > > > > > > > > > > > > >From: "Raphael Coeffic" <rco(a)iptel.org> > > > > >To: "Kapil Dhawan" <sersavvy(a)hotmail.com> > > > > >Subject: Re: [Serusers] SER + SEMS > > > > >Date: Tue, 24 Feb 2004 13:16:52 +0100 > > > > > > > > > >Hi! > > > > > > > > > > > CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/sems > > > > > > export CVSROOT > > > > > > cvs co answer_machine > > > > > > > > > >you should use instead 'cvs co -r ser_rel_0_8_12 answer_machine'. > > > > > > > > > > > CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/ser > > > > > > export CVSROOT > > > > > > cvs co -r rel_0_8_12 sip_router > > > > > > > > > >Both command work same if you type the CVSROOT as -d parameter as i > > >wrote > > > > >to > > > > >you. It's then important to type it as ONE line. > > > > >(every thing on the same cmd line: > > > > >'cvs -d:pserver:anonymous@cvs.berlios.de:/cvsroot/sems co -r > > >ser_rel_0_8_12 > > > > >answer_machine') > > > > > > > > > >-Raphael. > > > > > > > > > > > > > _________________________________________________________________ > > > > INDIA TODAY @ Rs. 5 for 5 years ! > > > > >http://www.indiatoday.com/itoday/intlsubscription/itsubs/it_offer.html > > > > Subcribe Now ... > > > > > > > > _______________________________________________ > > > > Serusers mailing list > > > > serusers(a)lists.iptel.org > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > _________________________________________________________________ > > Post Classifieds on MSN classifieds. >http://www.sulekha.com/msnclassifieds > > Buy and Sell on MSN Classifieds. > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > _________________________________________________________________ Masterpieces made affordable! Buy art prints. http://go.msnserver.com/IN/42736.asp MSN Shopping.

1 0

[Serusers] radius accounting
by Dawid Mielnik 25 Feb '04

25 Feb '04

Hi, I'm trying to add radius accounting to my ser server. I'm running an install from CVS (stable release - 0.8.12). I know the accounting module is there in there, in the unstable branch, but when try to check out the module (radius_acc) from release 0.8.12 - I dont get the module in my source tree. Is there no radius accounting for the stable CVS branch ? How can I add radius accounting to my ser server then ? Thanks, Dave

1 1

Re: [Serusers] SER + SEMS
by Kapil Dhawan 25 Feb '04

25 Feb '04

I hope the problem is not with SEMS, rather it is in my ser.cfg...i am pasting my ser.cfg also http://203.196.128.126/ser.cfg >From: "Raphael Coeffic" <rco(a)iptel.org> >To: "Kapil Dhawan" <sersavvy(a)hotmail.com> >CC: <sems(a)lists.iptel.org> >Subject: Re: [Serusers] SER + SEMS >Date: Wed, 25 Feb 2004 00:47:31 +0100 > >Hi, > >could you send ser+sems log (complete, not only the part reporting the >problem)? > >-Raphael. > >----- Original Message ----- >From: "Kapil Dhawan" <sersavvy(a)hotmail.com> >To: <rco(a)iptel.org> >Cc: <serusers(a)lists.iptel.org> >Sent: Tuesday, February 24, 2004 1:56 PM >Subject: Re: [Serusers] SER + SEMS > > > > > > Hi this is where error is coming > > mail is going perfect but in the mean time... > > > > (4897) DEBUG: run (AmServer.cpp:165): version= <> > > (4897) ERROR: run (AmServer.cpp:194): wrong FIFO Interface version. > > > > this is coming which is stopping my sems and ser combination to stop > > > > (5018) DEBUG: openReplyFifo (AmRequest.cpp:362): flags=800 > > (5018) DEBUG: openReplyFifo (AmRequest.cpp:364): flags=0 > > (5018) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: >completed > > (5018) DEBUG: getReturnCode (AmRequest.cpp:400): Waiting for Ser to >respond > > to t > > he FIFO request... > > (4897) DEBUG: run (AmServer.cpp:165): version= <> > > (4897) ERROR: run (AmServer.cpp:194): wrong FIFO Interface version. > > (5018) DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 200 > > fifo_t_r > > eply succeeded > > (5018) DEBUG: getReturnCode (AmRequest.cpp:442): n_cmd.from_uri= <> > > (5018) DEBUG: getReturnCode (AmRequest.cpp:445): n_cmd.next_hop= <> > > (5018) DEBUG: getReturnCode (AmRequest.cpp:448): n_cmd.route= <> > > (5018) DEBUG: sendToFIFO (AmRequest.cpp:216): sendToFifo returns > > ret=getReturnCo > > de=0 > > (5018) DEBUG: setRAddr (AmRtpStream.cpp:313): RTP remote address set to > > 203.196. > > 128.122:54321 > > (5018) DEBUG: run (AmSession.cpp:141): Sending Rtp data to > > 203.196.128.122/54321 > > (5018) DEBUG: onSessionStart (AnswerMachine.cpp:139): starting sending > > announce. > > ..(/usr/local/lib/sems/audio/default.wav) > > > > > > >From: "Raphael Coeffic" <rco(a)iptel.org> > > >To: "Kapil Dhawan" <sersavvy(a)hotmail.com> > > >Subject: Re: [Serusers] SER + SEMS > > >Date: Tue, 24 Feb 2004 13:16:52 +0100 > > > > > >Hi! > > > > > > > CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/sems > > > > export CVSROOT > > > > cvs co answer_machine > > > > > >you should use instead 'cvs co -r ser_rel_0_8_12 answer_machine'. > > > > > > > CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/ser > > > > export CVSROOT > > > > cvs co -r rel_0_8_12 sip_router > > > > > >Both command work same if you type the CVSROOT as -d parameter as i >wrote > > >to > > >you. It's then important to type it as ONE line. > > >(every thing on the same cmd line: > > >'cvs -d:pserver:anonymous@cvs.berlios.de:/cvsroot/sems co -r >ser_rel_0_8_12 > > >answer_machine') > > > > > >-Raphael. > > > > > > > _________________________________________________________________ > > INDIA TODAY @ Rs. 5 for 5 years ! > > http://www.indiatoday.com/itoday/intlsubscription/itsubs/it_offer.html > > Subcribe Now ... > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > _________________________________________________________________ Post Classifieds on MSN classifieds. http://www.sulekha.com/msnclassifieds Buy and Sell on MSN Classifieds.

2 1

[Serusers] t_on_ ?
by Laurent BURGY 25 Feb '04

25 Feb '04

Hi, I want to do some reply processing and i am a bit disappointed because i don't know which function to use. In deed, on the pdf version of the tm doc, i only see t_on_negative which branches to a reply_route but in the examples with the distribution, i saw a t_on_failure function which branches to a failure_route and in the tm, i saw a t_on_reply... So i don't know which one to use in what cases...(Because for me a negative reply is >300 but a failure reply may be > 400).... thus, i am a bit lost.... I need help.... thx Laurent

1 0

FW: [Serusers] Rtpproxy
by Shirley Toh 25 Feb '04

25 Feb '04

Hi I have problem calling through UA behind Symmetric network? Please advice any solution to this problem. Thank you!!! UA1(Symmetric NAT) ----> SER ---> UA2 (Symmetric NAT) Regards, Shirley > -----Original Message----- > From: Shirley Toh > Sent: Tuesday, February 24, 2004 9:09 PM > To: 'Jan Janak' > Subject: RE: [Serusers] Rtpproxy > > Hi, > > Thank you for your answer. > > Can I check the latest module in CVS does it support to call from > Symmetric network to Symmetric network?Please help. If can what sgould I > take note in the commands? > > Regards, > Shirley > > -----Original Message----- > From: Jan Janak [SMTP:jan@iptel.org] > Sent: Tuesday, February 24, 2004 8:35 PM > To: Shirley Toh > Cc: SER Users (E-mail) > Subject: Re: [Serusers] Rtpproxy > > You are calling force_rtp_proxy or fix_nated_sdp on a message with empty > body. Make sure that you call the functions from the script only when > the message contains SDP body (usually INVITE and 200 OK). > > Jan. > > On 24-02 11:36, Shirley Toh wrote: > > Hi, > > > > Can anyone help me!! I am having this error on my log file when I try to > > make calls. I have attached my ser.cfg. Please help!! Thanks!! > > > > Feb 24 11:29:54 sipserver2 /usr/local/sbin/ser[20404]: ERROR: > > send_rtpp_command: can't read reply from a RTP proxy > > Feb 24 11:29:54 sipserver2 /usr/local/sbin/ser[20413]: ERROR: > extract_body: > > message body has lenght zero > > Feb 24 11:29:54 sipserver2 /usr/local/sbin/ser[20413]: ERROR: > > force_rtp_proxy: can't extract body from the message > > Feb 24 11:29:54 sipserver2 /usr/local/sbin/ser[20413]: ERROR: on_reply > > processing failed > > Feb 24 11:29:54 sipserver2 /usr/local/sbin/ser[20417]: ERROR: > extract_body: > > message body has lenght zero > > Feb 24 11:29:54 sipserver2 /usr/local/sbin/ser[20417]: ERROR: > > force_rtp_proxy: can't extract body from the message > > Feb 24 11:29:54 sipserver2 /usr/local/sbin/ser[20417]: ERROR: on_reply > > processing failed > > Feb 24 11:30:24 sipserver2 /usr/local/sbin/ser[20417]: ERROR: > extract_body: > > message body has lenght zero > > Feb 24 11:30:24 sipserver2 /usr/local/sbin/ser[20417]: ERROR: > > force_rtp_proxy: can't extract body from the message > > Feb 24 11:30:24 sipserver2 /usr/local/sbin/ser[20417]: ERROR: on_reply > > processing failed > > Feb 24 11:30:24 sipserver2 /usr/local/sbin/ser[20407]: ERROR: > extract_body: > > message body has lenght zero > > Feb 24 11:30:24 sipserver2 /usr/local/sbin/ser[20407]: ERROR: > fix_nated_sdp: > > cannot extract body from msg! > > Feb 24 11:30:24 sipserver2 /usr/local/sbin/ser[20407]: ERROR: > extract_body: > > message body has lenght zero > > Feb 24 11:30:24 sipserver2 /usr/local/sbin/ser[20407]: ERROR: > > force_rtp_proxy: can't extract body from the message > > Feb 24 11:30:24 sipserver2 /usr/local/sbin/ser[20407]: ERROR: on_reply > > processing failed > > > > <<ser.cfg.txt>> > > > > regards, > > shirley > > > > > # > > # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ > > # > > # simple quick-start config script > > # > > > > # ----------- global configuration parameters ------------------------ > > > > #debug=3 # debug level (cmd line: -dddddddddd) > > #fork=yes > > #log_stderror=no # (cmd line: -E) > > > > /* Uncomment these lines to enter debugging mode > > debug=7 > > fork=no > > log_stderror=yes > > */ > > > > check_via=no # (cmd. line: -v) > > dns=no # (cmd. line: -r) > > rev_dns=no # (cmd. line: -R) > > #port=5060 > > #children=4 > > fifo="/tmp/ser_fifo" > > mhomed=yes > > > > # ------------------ module loading ---------------------------------- > > > > # Uncomment this if you want to use SQL database > > loadmodule "/usr/local/lib/ser/modules/mysql.so" > > > > loadmodule "/usr/local/lib/ser/modules/nathelper.so" > > loadmodule "/usr/local/lib/ser/modules/textops.so" > > loadmodule "/usr/local/lib/ser/modules/sl.so" > > loadmodule "/usr/local/lib/ser/modules/tm.so" > > loadmodule "/usr/local/lib/ser/modules/rr.so" > > loadmodule "/usr/local/lib/ser/modules/maxfwd.so" > > loadmodule "/usr/local/lib/ser/modules/usrloc.so" > > loadmodule "/usr/local/lib/ser/modules/registrar.so" > > > > # Uncomment this if you want digest authentication > > # mysql.so must be loaded ! > > loadmodule "/usr/local/lib/ser/modules/auth.so" > > loadmodule "/usr/local/lib/ser/modules/auth_db.so" > > > > # ----------------- setting module-specific parameters --------------- > > > > # -- usrloc params -- > > > > #modparam("usrloc", "db_mode", 0) > > > > # Uncomment this if you want to use SQL database > > # for persistent storage and comment the previous line > > modparam("usrloc", "db_mode", 2) > > > > # -- auth params -- > > # Uncomment if you are using auth module > > # > > modparam("auth_db", "calculate_ha1", yes) > > # > > # If you set "calculate_ha1" parameter to yes (which true in this > config), > > # uncomment also the following parameter) > > # > > modparam("auth_db", "password_column", "password") > > > > # -- rr params -- > > # add value to ;lr param to make some broken UAs happy > > modparam("rr", "enable_full_lr", 1) > > > > # -- Nathelper -- > > modparam("registrar" , "nat_flag", 6) > > modparam("nathelper", "natping_interval", 60) > > modparam("nathelper", "ping_nated_only", 1) > > > > # ------------------------- request routing logic ------------------- > > > > # main routing logic > > > > route{ > > > > # initial sanity checks -- messages with > > # max_forwards==0, or excessively long requests > > if (!mf_process_maxfwd_header("10")) { > > sl_send_reply("483","Too Many Hops"); > > break; > > > > }; > > if ( msg:len > max_len ) { > > sl_send_reply("513", "Message too big"); > > break; > > }; > > > > > > #!! Nathelper > > if (nat_uac_test("3")){ > > if (method == "REGISTER"){ > > log("LOG:Someone trying to register from private > IP, rewriting\n"); > > fix_nated_contact(); # Rewtite contact with > source IP of signalling > > if(method== "INVITE"){ > > fix_nated_sdp("1"); # Add > direction-active to SDP > > }; > > force_rport(); > > setflag(6); > > }; > > }; > > > > # we record-route all messages -- to make sure that > > # subsequent messages will go through our proxy; that's > > # particularly good if upstream and downstream entities > > # use different transport protocol > > record_route(); > > # loose-route processing > > if (loose_route()) { > > t_relay(); > > break; > > }; > > > > # if the request is for other domain use UsrLoc > > # (in case, it does not work, use the following command > > # with proper names and addresses in it) > > if (uri==myself) { > > > > if (method=="REGISTER") { > > save("location"); > > break; > > }; > > > > # native SIP destinations are handled using our USRLOC > DB > > if (!lookup("location")) { > > sl_send_reply("", "Connecting"); > > break; > > }; > > }; > > if (isflagset(6)){ > > force_rtp_proxy(); > > }; > > t_on_reply("1"); > > > > # forward to current uri now; use stateful forwarding; that > > # works reliably even if we forward from TCP to UDP > > if (!t_relay()) { > > sl_reply_error(); > > break; > > }; > > > > } > > > > # all incoming replies for t_onrepli-ed transactions enter here > > onreply_route[1] { > > if (isflagset(6) && status=~"(183)|2[0-9][0-9]") { > > fix_nated_contact(); > > fix_nated_sdp("1"); > > force_rtp_proxy(); > > }else if(nat_uac_test("1")){ > > fix_nated_contact(); > > force_rtp_proxy(); > > }; > > > > } > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers

1 0

Re: [Serusers] SER + SEMS
by Kapil Dhawan 25 Feb '04

25 Feb '04

Here is my log http://203.196.128.126/kapils_sems.txt >From: "Raphael Coeffic" <rco(a)iptel.org> >To: "Kapil Dhawan" <sersavvy(a)hotmail.com> >CC: <sems(a)lists.iptel.org> >Subject: Re: [Serusers] SER + SEMS >Date: Wed, 25 Feb 2004 00:47:31 +0100 > >Hi, > >could you send ser+sems log (complete, not only the part reporting the >problem)? > >-Raphael. > >----- Original Message ----- >From: "Kapil Dhawan" <sersavvy(a)hotmail.com> >To: <rco(a)iptel.org> >Cc: <serusers(a)lists.iptel.org> >Sent: Tuesday, February 24, 2004 1:56 PM >Subject: Re: [Serusers] SER + SEMS > > > > > > Hi this is where error is coming > > mail is going perfect but in the mean time... > > > > (4897) DEBUG: run (AmServer.cpp:165): version= <> > > (4897) ERROR: run (AmServer.cpp:194): wrong FIFO Interface version. > > > > this is coming which is stopping my sems and ser combination to stop > > > > (5018) DEBUG: openReplyFifo (AmRequest.cpp:362): flags=800 > > (5018) DEBUG: openReplyFifo (AmRequest.cpp:364): flags=0 > > (5018) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: >completed > > (5018) DEBUG: getReturnCode (AmRequest.cpp:400): Waiting for Ser to >respond > > to t > > he FIFO request... > > (4897) DEBUG: run (AmServer.cpp:165): version= <> > > (4897) ERROR: run (AmServer.cpp:194): wrong FIFO Interface version. > > (5018) DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 200 > > fifo_t_r > > eply succeeded > > (5018) DEBUG: getReturnCode (AmRequest.cpp:442): n_cmd.from_uri= <> > > (5018) DEBUG: getReturnCode (AmRequest.cpp:445): n_cmd.next_hop= <> > > (5018) DEBUG: getReturnCode (AmRequest.cpp:448): n_cmd.route= <> > > (5018) DEBUG: sendToFIFO (AmRequest.cpp:216): sendToFifo returns > > ret=getReturnCo > > de=0 > > (5018) DEBUG: setRAddr (AmRtpStream.cpp:313): RTP remote address set to > > 203.196. > > 128.122:54321 > > (5018) DEBUG: run (AmSession.cpp:141): Sending Rtp data to > > 203.196.128.122/54321 > > (5018) DEBUG: onSessionStart (AnswerMachine.cpp:139): starting sending > > announce. > > ..(/usr/local/lib/sems/audio/default.wav) > > > > > > >From: "Raphael Coeffic" <rco(a)iptel.org> > > >To: "Kapil Dhawan" <sersavvy(a)hotmail.com> > > >Subject: Re: [Serusers] SER + SEMS > > >Date: Tue, 24 Feb 2004 13:16:52 +0100 > > > > > >Hi! > > > > > > > CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/sems > > > > export CVSROOT > > > > cvs co answer_machine > > > > > >you should use instead 'cvs co -r ser_rel_0_8_12 answer_machine'. > > > > > > > CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/ser > > > > export CVSROOT > > > > cvs co -r rel_0_8_12 sip_router > > > > > >Both command work same if you type the CVSROOT as -d parameter as i >wrote > > >to > > >you. It's then important to type it as ONE line. > > >(every thing on the same cmd line: > > >'cvs -d:pserver:anonymous@cvs.berlios.de:/cvsroot/sems co -r >ser_rel_0_8_12 > > >answer_machine') > > > > > >-Raphael. > > > > > > > _________________________________________________________________ > > INDIA TODAY @ Rs. 5 for 5 years ! > > http://www.indiatoday.com/itoday/intlsubscription/itsubs/it_offer.html > > Subcribe Now ... > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > _________________________________________________________________ Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag Only on www.shaadi.com. Register now!

1 0

← Newer
1
...
4
5
6
7
8
9
10
...
39
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users February 2004