sr-users May 2003

sr-users@lists.kamailio.org

52 participants
100 discussions

by anna

---> Have you configured PHP to load the MySQL extension? How do I do that, bellow I have experimented some with the /etc/php.ini file, but still the same result !! So how do I configure PGP tp load the MySQL extension Many thanks again for quick answers /ANNA ; Directory in which the loadable extensions (modules) reside. ;extension_dir = /usr/lib/php4 extension_dir = /usr/local/lib/ser/modules [ /usr/local/lib/ser/modules/mysql.so ] ;Whether or not to enable the dl() function. The dl() function does NOT work ; properly in multithreaded servers, such as IIS or Zeus, and is automatically ; disabled on them. enable_dl = On ;extension=ldap.so ;extension=mhash.so ;extension=mssql65.so ;extension=mssql70.so extension=mysql.so ;extension=oas.so ;extension=odbc.so ;extension=oci8.so ;extension=oracle.so ;extension=pdf.so __________________________________________________________________ anna rahm ICQ#: 176699319 Current ICQ status: + More ways to contact me __________________________________________________________________

20 years, 11 months

[Serusers] See code when browse serweb files

by George KAPELIOS

I have installed ser on RedHat 8.0/i686 and I' m trying to run serweb over Apache 2.0.40 and PHP 4.2.2 (both they are the default versions installed by RH 8.0). I have made all (I hope) the adjustments in the .php and .conf files, but when I' m trying to open the /serweb/admin/index.php file (either by Mozila on the same PC, or by IE 5 on a Win-XP PC), I only see the code of the file. However, the code is not shown from the very first line, but always from the same point, 3 or 4 line below the first one. Thanks in advance for any help or idea. regards, George

20 years, 11 months

[Serusers] get serweb running

by Anna

Trying to load the serweb page I get the following error message: Fatal error: Call to undefined function: mysql_pconnect() in /var/www/html/phplib/db_mysql.inc on line 73 I have looked into the database settings and can't find anything wrong with them. are there more then this: $this->db_host="172.18.3.164"; //database host $this->db_name="ser"; //database name $this->db_user="ser"; //database conection user $this->db_pass="heslo"; //database conection password I have also tried to "Installing SERweb custom file locations" 4.3 in the http://www.fitawi.com/ser-Howto.html but just can't get it to work, please help ! see config file bellow I try to load the page : http://dhcp164-devel/htdocs/serweb/admin/index.php after the error masg the browser say: http://dhcp164-devel/htdocs/serweb/admin/index.php?phplib_Session=4bcada0b4… Many thank's /ANNA serweb dir include: admin config.php CVS functions.php img page.php styles user_interface the config.php file is placed in: /var/www/html/htdocs/serweb <? /* * $Id: config.php,v 1.10 2002/09/25 23:26:47 jiri Exp $ */ class Csub_not { var $uri, $desc; function Csub_not($uri, $desc){ $this->uri=$uri; $this->desc=$desc; } } class Cconfig { var $db_host; var $db_name; var $db_user; var $db_pass; var $table_subscriber; var $table_pending; var $table_grp; var $table_aliases; var $table_location; var $table_missed_calls; var $table_accounting; var $table_phonebook; var $table_event; var $show_voicemail_acl; var $enable_dial_voicemail; var $enable_test_firewall; var $grp_values; var $realm; var $domainname; var $first_alias_number; var $new_alias_expires; var $new_alias_q; var $new_alias_callid; var $new_alias_cseq; var $pre_uid_expires; var $psignature; var $web_contact; var $fifo_server; var $reply_fifo_filename; var $reply_fifo_path; var $ul_table; var $ul_priority; var $im_length; var $default_domain; var $root_path; var $img_src_path; var $js_src_path; var $style_src_path; var $zonetab_file; var $charset; var $default_width; var $num_of_showed_items; var $enable_tabs; var $sub_not; var $link_siptutorial; var $link_sipproducts; var $link_standards; var $link_iptelworkshop; var $link_glossary; var $link_abstract; var $link_home; var $mail_header_from; var $mail_forgot_pass; var $forgot_pass_subj; var $mail_register; var $register_subj; var $terms_and_conditions; function Cconfig(){ $this->db_host="172.18.3.164"; //database host $this->db_name="ser"; //database name $this->db_user="ser"; //database conection user $this->db_pass="heslo"; //database conection password // names of tables $this->table_subscriber="subscriber"; $this->table_pending="pending"; $this->table_grp="grp"; $this->table_aliases="aliases"; $this->table_location="location"; $this->table_missed_calls="missed_calls"; $this->table_accounting="acc"; $this->table_phonebook="phonebook"; $this->table_event="event"; $this->show_voicemail_acl=true; //show "voicemail" in ACL and voicemail checkbox at my account $this->enable_dial_voicemail=false; $this->enable_test_firewall=false; $this->grp_values[]="voicemail"; $this->grp_values[]="ld"; $this->grp_values[]="local"; $this->grp_values[]="int"; $this->realm="e-horizon.se"; $this->domainname="e-horizon.se"; $this->first_alias_number=18888; $this->new_alias_expires='2020-01-01 00:00:00'; $this->new_alias_q=1.00; $this->new_alias_callid=""; $this->new_alias_cseq=1; $this->pre_uid_expires=3600; //seconds in which expires "get pass session" $this->psignature="Web_interface_Karel_Kozlik-0.9"; $this->web_contact="sip:daemon@iptel.org"; //address of pseudo sender $this->fifo_server="/tmp/ser_fifo"; //path to fifo server $this->reply_fifo_filename="webfifo_".rand(); $this->reply_fifo_path="d:/temp/".$this->reply_fifo_filename; $this->ul_table="table"; $this->ul_priority="1.00"; $this->im_length=1300; //max length of instant message $this->default_domain="e-horizon.se"; $this->root_path="/serweb"; $this->img_src_path = $this->root_path."img/"; $this->js_src_path = $this->root_path."styles/"; $this->style_src_path = $this->root_path."styles/"; $this->zonetab_file = "/usr/share/zoneinfo/zone.tab"; //TZ zone descriptions file, usually: /usr/share/zoneinfo/zone.tab $this->charset="windows-1250"; $this->default_width=564; //width of usable area $this->num_of_showed_items=20; //num of showed items in the list of users $this->enable_tabs[1]=true; //enable tab my account $this->enable_tabs[2]=true; //enable tab phonebook $this->enable_tabs[3]=true; //enable tab missed calls $this->enable_tabs[4]=true; //enable tab accounting $this->enable_tabs[5]=true; //enable tab send IM $this->enable_tabs[6]=true; //enable tab notification subscription //notification subscription $this->sub_not[]=new Csub_not("sip:weather@iptel.org;type=temperature;operator=lt;value=0","temperature is too low"); $this->sub_not[]=new Csub_not("sip:weather@iptel.org;type=wind;operator=gt;value=10","wind is too fast"); $this->sub_not[]=new Csub_not("sip:weather@iptel.org;type=pressure;operator=lt;value=1000","pressure is too low"); //links in left menu $this->link_siptutorial=$this->root_path."sip/index.php"; $this->link_sipproducts=$this->root_path."products/index.html"; $this->link_standards=$this->root_path."info/players/index.html"; $this->link_iptelworkshop="http://www.iptel.org/2002/"; $this->link_glossary=$this->root_path."info/glossary.html"; //links on top $this->link_abstract=$this->root_path."info/abstract.html"; $this->link_home=$this->root_path."index.html"; $this->mail_header_from="php.kk(a)kufr.cz"; //header From: in outgoing emails $this->forgot_pass_subj="your login information"; $this->mail_forgot_pass="Hi,\n". "now you can access to your account at the folowing URL within 1 hour:\n". "http:/var/www/html/htdocs/serweb/user_interface/my_account.php?#session#\n\n". "we recommend change your password after you login\n". "iptel.org\n"; $this->register_subj="Your iptel.org Registration"; $this->mail_register="Thank you for registering with iptel.org.\n\n". "We are reserving the following SIP address for you: #sip_address#\n\n". "To finalize your registration please check the following URL within 24 hours:\n". "http:/var/www/html/htdocs/serweb/user_interface/reg/confirmation.php?nr=#confirm#\n\n". "(If you confirm later you will have to re-register.)\n\n". "Windows Messenger users may look at additional configuration hints at\n". "http://www.iptel.org/phpBB/viewtopic.php?topic=11&forum=1&0\n"; $this->terms_and_conditions="BY PRESSING THE 'I ACCEPT' BUTTON, YOU (HEREINAFTER THE 'USER') ARE STATING THAT YOU AGREE ". "TO ACCEPT AND BE BOUND BY ALL OF THE TERMS AND CONDITIONS OF THIS ". "AGREEMENT. DO NOT PROCEED IF YOU ARE UNABLE TO AGREE TO THE TERMS ". "AND CONDITIONS OF THIS AGREEMENT. THESE TERMS AND CONDITIONS OF SERVICE ". "FOR USE OF iptel.org SIP SERVER (THE 'AGREEMENT') CONSTITUTE A LEGALLY ". "BINDING CONTRACT BETWEEN iptel.org AND THE ENTITY THAT AGREES TO AND ". "ACCEPTS THESE TERMS AND CONDITIONS. ACCESS TO iptel.org's SESSION ". "INITIATION PROTOCOL SERVER ('SIP SERVER') IS BEING PROVIDED ON AN ". "'AS IS' AND 'AS AVAILABLE' BASIS, AND iptel.org MAKES NO REPRESENTATIONS ". "OR WARRANTIES OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO ". "USER'S ACCESS OF THE SIP SERVER, INCLUDING BUT NOT LIMITED TO WARRANTIES ". "OF MERCHANTABILITY, NONINFRINGEMENT, TITLE OR FITNESS FOR A PARTICULAR PURPOSE. ". "FURTHER, iptel.org MAKES NO REPRESENTATIONS OR WARRANTIES THAT THE SIP SERVER, ". "OR USER'S ACCESS THERETO, WILL BE AVAILABLE AT ANY GIVEN TIME, OR WILL BE FREE ". "FROM ERRORS, DEFECTS, OMISSIONS, INACCURACIES, OR FAILURES OR DELAYS IN DELIVERY ". "OF DATA. USER ASSUMES, AND iptel.org DISCLAIM, TOTAL RISK, RESPONSIBILITY, AND ". "LIABILITY FOR USER'S ACCESS TO AND USE OF THE SIP SERVER.". "\n\n". "Access to iptel.org SIP Server is being provided on a non-exclusive basis.". "User acknowledges and understands that iptel.org SIP site is in a developmental ". "stage and that iptel.org makes no guarantees regarding the availability or functionality thereof. ". "User may not sublicense its access rights to the SIP Server to any third party. ". "\n\n". "USER AGREES TO INDEMNIFY, DEFEND AND HOLD iptel.org, ITS AFFILIATES, DIRECTORS, OFFICERS, ". "EMPLOYEES, AGENTS AND LICENSORS HARMLESS FROM AND AGAINST ANY AND ALL CLAIMS, ACTIONS, ". "EXPENSES, LOSSES, AND LIABILITIES (INCLUDING COURTS COSTS AND REASONABLE ATTORNEYS' FEES), ". "ARISING FROM OR RELATING TO THIS AGREEMENT INCLUDING USER'S ACCESS TO AND USE OF THE SIP SERVER. ". "TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL iptel.org OR ANY OF ITS ". "LICENSORS, BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY, OR CONSEQUENTIAL DAMAGES, ". "ARISING OUT OF THE ACCESS TO OR USE OF OR INABILITY TO ACCESS OR USE THE SIP SERVER, OR THAT ". "RESULT FROM MISTAKES, OMISSIONS, INTERRUPTIONS, DELETIONS OF FILES, ERRORS, DEFECTS, ". "DELAYS IN TRANSMISSION OR OPERATION OR ANY FAILURE OF PERFORMANCE, EVEN IF ADVISED ". "OF THE POSSIBILITY OF SUCH DAMAGES. ". "\n\n". "If User commits, in iptel.org's sole determination, a default of these terms and ". "conditions, iptel.org may immediately terminate User's access to the SIP Server. ". "Furthermore, iptel.org reserves the right to discontinue offering access to the ". "SIP Server at any time. ". "\n\n". "User may not assign its rights hereunder without the prior written consent of ". "iptel.org. User agrees to comply with all laws, regulations and other legal ". "requirements that apply to these terms and conditions. ". "\n\n". "If any provision of this Agreement is held to be unenforceable for any reason, ". "such provision shall be reformed only to the extent necessary to comply with ". "applicable laws, and the remainder shall remain in full force and effect. ". "\n\n". "Any failure of iptel.org to enforce any provision of this Agreement shall ". "not constitute a waiver of any rights under such provision or any other ". "provision of this Agreement. ". "\n\n". "USER ACKNOWLEDGES THAT IT HAS READ THIS AGREEMENT, UNDERSTANDS IT, AND AGREES THAT ". "IT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF THE ENTIRE AGREEMENT BETWEEN COMPANY ". "AND iptel.org WITH RESPECT TO THE SUBJECT MATTER HEREIN, AND SUPERSEDES ALL PRIOR ". "AND CONTEMPORANEOUS PROPOSALS, DISCUSSIONS, AGREEMENTS, UNDERSTANDINGS, AND COMMUNICATIONS, ". "WHETHER WRITTEN OR ORAL AND MAY BE AMENDED ONLY IN A WRITING EXECUTED BY BOTH USER AND iptel.org. ". "\n\n"; } } $config=new Cconfig(); ?>

20 years, 11 months

[Serusers] can't get serweb working

by anna

20 years, 11 months

[Serusers] can't get serweb running

by anna

20 years, 11 months

[Serusers] 483: Too many hops

by srm＠cs.stir.ac.uk

Hi, I am just trying the new ser version from CVS, and I get a too many hops error message when a client tries to register. Any idea? I am running ser on Linux. I have tried both kphone 3.1 and spic 2.?? as user agents. I am sure I must have missed something in my configuration file. I attach the current ser.cfg. thanks, Stephan -- The University of Stirling is a university established in Scotland by charter at Stirling, FK9 4LA. Privileged/Confidential Information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not disclose, copy or deliver this message to anyone and any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. In such case, you should destroy this message and kindly notify the sender by reply email. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. Opinions, conclusions and other information in this message that do not relate to the official business of the University of Stirling shall be understood as neither given nor endorsed by it.

20 years, 11 months

[Serusers] mySQL

by Gary Goodloff

I finnaly have this thing in and running. I can make a call to another person on the same server. But it appears that it is not checking a password. I have everything configured the way all the how-to's say for mysql authentication - but I am at a loss. Also it does not appear to be supporting accounting (missed calls). Can anyone help? Here is my ser.cfg file. # # $Id: ser.cfg,v 1.12 2002/10/21 02:40:06 jiri Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) check_via=no # (cmd. line: -v) dns=yes # (cmd. line: -r) rev_dns=yes # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 1) # -- auth params -- [ Read 105 lines ] root: /www/kalgonline/ser % cat/usr/local/etc/ser/ser.cfg cat/usr/local/etc/ser/ser.cfg: Command not found. root: /www/kalgonline/ser % cat /usr/local/etc/ser/ser.cfg # # $Id: ser.cfg,v 1.12 2002/10/21 02:40:06 jiri Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) check_via=no # (cmd. line: -v) dns=yes # (cmd. line: -r) rev_dns=yes # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 1) # -- auth params -- # Uncomment if you are using auth module # modparam("auth", "secret", "alsdkhglaksdhfkloiwr") modparam("auth", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth", "password_column", "password") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwars==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # Do strict routing if pre-loaded route headers present rewriteFromRoute(); # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri=="kalg.net") { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("kalg.net", "subscriber")) { www_challenge("kalg.net", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now if (!t_relay()) { sl_reply_error(); }; } Gary Goodloff KALG Communications / Nebraska Classifieds T: 402-898-4152 C: 402-208-5183 F: 413-294-3404

20 years, 11 months

[Serusers] CVS error

by Yang Xiang

Hi, according to the description on the site http://developer.berlios.de/docman/display_doc.php?docid=32&group_id=2 I have tried the CVS. Unfortunately it doesn't work with me: bash-2.03# cvs -d:pserver:anonymous@cvs.ser.berlios.de/cvsroot/ser co auth cvs server: cannot find module `auth' - ignored cvs [checkout aborted]: cannot expand modules When I input the whole directory like: bash-2.03# cvs -d:pserver:anonymous@cvs.ser.berlios.de/cvsroot/ser/sip_router/modules co auth then I get an erro: cvs checkout: authorization failed: server cvs.ser.berlios.de rejected access to /cvsroot/ser/sip_router/modules for user anonymous cvs checkout: used empty password; try "cvs login" with a real password What is wrong? Thanks Yang

20 years, 11 months

[Serusers] COMer - Programming Language for Component Development

by Dexterity Technologies Limited

COMer - Programming Language for Component Development If you are a Windows Programmer, I would like to introduce something interesting to you. COMer is a native programming language for COM component development. A COM component can be easily made in COMer as follow: [File:MyCom.cm] #ifndef _MYCOM_CM #define _MYCOM_CM /* * A COM Class */ [ clsid = "{EF6CD47E-B844-4219-B582-6F9FE16D45F6}", progid = "Dexterity.MyCom1.1", helpstring = "Dexterity Com1 Class", export, unhandle ] com CMyCom1 { /* * An Interface implemented in this class */ [iid="{A123799B-1D8B-4efb-8D43-42AE582767C1}"] interface IMyInterface { method SetValue(int dVal) { m_dValue = dVal; done; } method GetDoubleValue(int &dVal) { dVal = m_dValue << 1; done; } } /* * Instance variables */ instvars { int m_dValue; } } #endif The design of COMer is native to the concept of the Component Object Model (COM) mechanism. COM classes are defined as in the way that COM specifies. Interfaces are specified or defined within a COM class and the methods of the interfaces are defined within the interfaces. It is simple. A special characteristic of COMer is that the COMer compiler generates C++ source code files as its final outputs. Therefore, you can use C++ code within the COMer classes, like Lex, Yacc or MIDL. To build the component, what you need to do is to specify one more file only to indicate the module of the component to build. E.g: [File:MyCom.cmdef] module: inprocsvr source { MyCom.cm } Then, by the following command line (cmc is the COMer compiler program): > cmc MyCom.cmdef COMer compiler will generate the following C++ files: Main.cpp MyCom.h MyCom.cpp MyCom.def Makefile Finally, you only need to build these C++ files by using the generated makefile by C++ build tools. The component 'MyCom.dll' will then be made. It's so simple! Lets try it! You will like it! Home Page: http://www.dexterity.com.hk/COMer/ Download Trial Version: http://www.dexterity.com.hk/COMer/Download/Download.asp Dexterity Technologies Limited http://www.dexterity.com.hk/ If you don't want to receive any more message from us, please send an e-mail to comer(a)dexteritytech.com to unsubscribe. Please don't reply this e-mail. We apologize for any inconvenience caused.

20 years, 11 months

[Serusers] User Based Dialplans

by Fernando Nachtigall

Hi All, I need to implement an used based dialplans module on SER, so that depending on the user information stored in the database, a certain prefix should be inserted in the called number. Has anyone had a similar issue? Thanks Fernando --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.474 / Virus Database: 272 - Release Date: 4/18/2003

20 years, 11 months

← Newer
1
2
3
4
5
6
7
8
9
10
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users May 2003