sr-users February 2003

sr-users@lists.kamailio.org

45 participants
91 discussions

[Serusers] Testing SER
by Jaime Hemmett 14 Feb '03

14 Feb '03

Hello, I installed SER, I have started the services. I haven't set up the mysql part yet, I wanted to test it working at all. With bone phone I have tried connecting but gotten: "java.net.BindException: Address already in use" The SER documentation makes out that SER can be used without the mysql parts to make calls with microsoft messenger > version 4.6 ut I've been unable to connect with this either. What now? Jaime.

3 4

[Serusers] Small patch for sip_dictionary
by Maxim Sobolev 14 Feb '03

14 Feb '03

Folks, sip_dictionary buindled with ser doesn't include Vendor-Specific attribute. Attached patch should fix it, it would be nice to have it included into the next release. Thanks! -Maxim $FreeBSD$ --- etc/sip_dictionary 2003/01/27 14:13:18 1.1 +++ etc/sip_dictionary 2003/01/27 14:13:39 @@ -48,6 +48,7 @@ ATTRIBUTE Framed-Route 22 string ATTRIBUTE Framed-IPX-Network 23 ipaddr ATTRIBUTE State 24 string +ATTRIBUTE Vendor-Specific 26 string ATTRIBUTE Session-Timeout 27 integer ATTRIBUTE Idle-Timeout 28 integer ATTRIBUTE Termination-Action 29 integer

2 1

Re: [Serusers] User permission question.
by Ivan Vignola 14 Feb '03

14 Feb '03

Hi, thank you for your replies. I need be sure that user 'ivan', with password 'ivanpswd', registers himself typing 'sip:ivan.vignola@192.168.11.237' and not typing 'silvio.berlusconi(a)192.168.11.237'. Regards. Ivan. >From: Jiri Kuthan <jiri(a)iptel.org> >To: "Ivan Vignola" <ivanvignola(a)hotmail.com>, serusers(a)lists.iptel.org >Subject: Re: [Serusers] User permission question. >Date: Fri, 14 Feb 2003 11:45:37 +0100 > >I'm not sure what it means "authenticate by his uri". There are quite >many URIs in each request, which BTW have very low security value. >Can you give more details? > >Thanks, > >-Jiri > >At 10:29 AM 2/14/2003, Ivan Vignola wrote: > >Hi, > > > >in my tests user can authenticate himself using user_id, password and any >sip uri. I need user authenticating himself only by his associated uri. How >can I do that? > > > >Thanks in advance. > > > >Ivan Vignola. > > > > > > > > > > > >_________________________________________________________________ > >Vinci la nuova Nissan Micra con MSN Messenger! >http://www.msn.it/messenger/ > > > >_______________________________________________ > >Serusers mailing list > >serusers(a)lists.iptel.org > >http://lists.iptel.org/mailman/listinfo/serusers > >-- >Jiri Kuthan http://iptel.org/~jiri/ > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers _________________________________________________________________ MSN Foto: condividi, ritocca e stampa le tue foto online http://photos.msn.it

2 1

[Serusers] User permission question.
by Ivan Vignola 14 Feb '03

14 Feb '03

Hi, in my tests user can authenticate himself using user_id, password and any sip uri. I need user authenticating himself only by his associated uri. How can I do that? Thanks in advance. Ivan Vignola. _________________________________________________________________ Vinci la nuova Nissan Micra con MSN Messenger! http://www.msn.it/messenger/

3 2

[Serusers] problem with loading compiled radius modules
by Yang Xiang 14 Feb '03

14 Feb '03

Hi Jan, I have successfully compiled the radius modules radius_acc.so and radius_auth.so. But when I try to load the both modules ser tells me: ERROR: bad config file (2 errors) I use the solaris binary package from iptel and have compiled myself only the both radius modules. Is there any incompability? How can I get mor debug information? Regards, Yang ----------------------------------- My config file: debug=7 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/radius_acc.so" loadmodule "/usr/local/lib/ser/modules/radius_auth.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/local/lib/ser/modules/auth.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth", "secret", "alsdkhglaksdhfkloiwr") #modparam("auth", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth", "password_column", "password") # ------------------------- request routing logic ------------------- # main routing logic alias="pix-demo.fhg.de" route{ # initial sanity checks -- messages with # max_forwars==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # Do strict routing if pre-loaded route headers present rewriteFromRoute(); # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now if (!t_relay()) { sl_reply_error(); }; }

3 2

[Serusers] SIP2H323 and H3232SIP
by Benny Ho 13 Feb '03

13 Feb '03

Hi, How could I integrate SIP and H323 together? I would like to h323 endpoint call sip endpoint. Is it possible using SER? My config is Cisco AS5300, gnu gatekeeper and SER.

4 3

[Serusers] SerWeb
by Adriana Simizo 13 Feb '03

13 Feb '03

Hi, I' ve installed SERWEB.....But when I try to register or login...nothing happens... the page is reload. The Apache server is working. Anyone had this same problem? Thanks, Adriana Simizo Telefonica Brasil - Telecomunicações de São Paulo S. A.

1 0

[Serusers] and errors in digest.c ?
by Yang Xiang 13 Feb '03

13 Feb '03

Hi, and in file digest.c of the module radius_auth: warning: digest.c: In function `radius_authorize': digest.c:79: `PW_SIP_NONCE' undeclared (first use in this function) digest.c:79: (Each undeclared identifier is reported only once digest.c:79: for each function it appears in.) digest.c:83: `PW_SIP_NONCE_COUNT' undeclared (first use in this function) Changed from PW_SIP_NONCE to PW_SIP_USER_NONCE and from PW_SIP_NONCE_COUNT to PW_SIP_USER_NONCE_COUNT which are defined in your new header file "radiusclient.h". Hope this is ok. Regards Yang

2 1

[Serusers] Error in acc.c ?
by Yang Xiang 13 Feb '03

13 Feb '03

Hi, While trying to compile the module radius_acc I get some warnings as follows: acc.c: In function `radius_log_reply': acc.c:142: warning: passing arg 1 of `parse_from_header' from incompatible pointer type acc.c: In function `radius_log_ack': acc.c:426: warning: passing arg 1 of `parse_from_header' from incompatible pointer type acc.c: In function `rad_acc_request': acc.c:708: warning: passing arg 1 of `parse_from_header' from incompatible pointer type So I looked into the file acc.c and found such statements like if ( parse_from_header( msg )==-1 ) Because the function parse_from_header needs a parameter of type hdr_field, I changed the statements above to if ( parse_from_header( msg->headers )==-1 ) after this the warnings don't appear any longer. Is this change ok? Best Regards Yang

2 1

Re: [Serusers] SIP/H.323 Gateway
by Giorgos Tsiouris 12 Feb '03

12 Feb '03

No it is not very stable and it produces a huge executable but it is the only open source that I am aware off. I also think that the development of sip2h323gw has stop since the programer that did the development has left long ago from Vovida. You can also complile this with the new h323 libraries available from www.h323.org or so I think. Giorgos Tsiouris ----- Original Message ----- From: "Vlasis Hatzistavrou" <vhatz(a)auth.gr> To: "Giorgos Tsiouris" <gtsiouris(a)telecom.ntua.gr> Sent: Wednesday, February 12, 2003 5:11 PM Subject: Re: [Serusers] SIP/H.323 Gateway > Hello Giorgo, > > Have you worked with the Vovida sip2h323gw? Is it stable or compatible with > other major vendor H323 GW's like Cisco for example? > > Best regards, > Vlasis. > > Giorgos Tsiouris wrote: > > > There is one SIP to H323 gateway from www.vovida.org . You can download > > vocal and you can compile only the gateway. I also think that there is one > > from siemens (I do not remeber their site) but this is not open source. > > > > Giorgos Tsiouris > > > > ----- Original Message ----- > > From: "Ng, Soo Sim" <SooSim.Ng(a)hp.com> > > To: <serusers(a)lists.iptel.org> > > Sent: Wednesday, February 12, 2003 1:09 PM > > Subject: [Serusers] SIP/H.323 Gateway > > > > > Is there testing being done SIP end-point to H.323 end-point call and > > vice-versa. What's the SIP/H.323 gateway being tested? > > > > > > Thanks > > > > > > SS > > > _______________________________________________ > > > Serusers mailing list > > > serusers(a)lists.iptel.org > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers >

1 0

← Newer
1
2
3
4
5
6
7
8
9
10
Older →

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users February 2003