sr-users January 2003

sr-users@lists.kamailio.org

47 participants
77 discussions

[Serusers] [Fwd: ser-0.8.10: Server shutdown, deinstall and reinstalling

by Savasar Sinan UYGUR

Hello, I am now working with iptel express router source code ver 0.8.10 on a Suse 8.0 machine with gcc version 3.2 How can i send a signal to the server for shutdown and deinstall the installed server later which ist installed from a 1) tar.gz source with make install and if different 2) tar.gz source by unzipping the code under directory "/" Thanks

21 years, 2 months

[Serusers] user permission problem on ser-jabber gw

by Toni Barata (EPS)

Hi folks, ( I think!) I have successfully installed SER server with the ser-mysql and ser-jabber packages ( I have also a mysql server and a Jabber server running). For testing I have established a SIP IM session between two MS Messengers and it did work. After this I have tried to establish a IM session between a user SIP (MS Messenger) and a user Jabber (Exodus), but when the messenger sends a message for the jabber gateway the following error occurs: "ERROR: Your message was not sent. You do not have permision to use the gateway." What could be the problem here? Best regards, Toni

21 years, 2 months

[Serusers] sip server test on a local network

by Savasar Sinan UYGUR

I have installed IpTel on a SuSe 8.0 machine and have 2 Windows machines attached with a hub. When i try to add a user with: serctl add username ....- then i have a problem executing mysql. So is it because of the wrong installation or do i have to install the mysql packet from the SuSe control center? Thanks in advance.

21 years, 2 months

[Serusers] Progress on *BSD Platforms

by Art Mason

I also have found myself moving over to Free- and OpenBSD for most workstation and server needs, but I keep an install of Mandrake handy for those few apps that don't port to well over to the BSD platforms. What I'm really interested in is stund support in OpenBSD that integrated w/ pf, seeing as how the majority of my firewalls are now OpenBSD 3.1-3.2 boxes running the new pf code. Ser itself runs great on FreeBSD 4.7-RELEASE, which is what I use as my testing platform, but this NAT stuff is really killing me when it comes to bringing in potential callers over the WAN. Any word on when a *BSD-compatible binary of stund might be available? Thanks. -- Art Mason CCNA Network Consultant Maverick Datacom E-mail: amason(a)maverickdatacom.com

21 years, 2 months

[Serusers] The tm module generates non-compliant branch id for final 200 OK ACKs

by Maxim Sobolev

Folks, I discovered that the tm module generates non RFC3261 compliant branch id when forwarding ACK to the final 200 OK response. The RFC, to which ser claims to complain by prefixing generated branch id with magic "z9hG4bK", mandates that ACK to the final 200 OK response should carry on the same branch id as that response and the initial INVITE. On contrary, ser currently adds RFC3261-compliant branch ids for everything, but that final ACK, which in default configuration is being sent with branch id of `0'. This creates a compatibility problem when the next hop uses that branch id for matching 200 OKs to subsequent ACKs, example of such UA is Vovida's b2bua software. I do not have a fix right now, as I am away from my lab, but it should be pretty trivial to fix by pre-loading msg->add_to_branch_s with a correct value in tm module before calling forward() and non-overriding it in the forward() if it is already non-NULL. -Maxim

21 years, 2 months

[Serusers] [Fwd: ser-0.8.10: Fehler beim Kompilierung der Quellencode.]

by Savasar Sinan UYGUR

Ich habe Suse 8.0 auf dem der Kernel 2.4.18-4GB läuft. Ich habe iptel express router ser-0.8.10.tar.gz bereits entpackt und versucht mit "make " zu kompilieren. Die Kompilation bricht mit der unten angefügten Fehlermeldung ab. Was kann ich tun ? Wurde dieser Server auf dem Suse-Linux getestet bzw. unter welchem Suse-Kernel ist es lauffähig ? MfG. >*************************************************************** >CoRiMM:/home/sinan/SIP_Project/OpenSourceServers/IPTEL/ser-0.8.10 # make >modules >make[1]: Entering directory >`/home/sinan/SIP_Project/OpenSourceServers/IPTEL/ser-0.8.10/modules/acc' >../../Makefile.rules:77: acc.d: No such file or directory >../../Makefile.rules:77: acc_mod.d: No such file or directory >make[1]: Leaving directory >`/home/sinan/SIP_Project/OpenSourceServers/IPTEL/ser-0.8.10/modules/acc' >make[1]: Entering directory >`/home/sinan/SIP_Project/OpenSourceServers/IPTEL/ser-0.8.10/modules/acc' >gcc -fPIC -DPIC -O9 -funroll-loops -Wcast-align -Wall >-minline-all-stringops -malign-double -falign-loops -march=athlon >-DNAME='"ser"' -DVERSION='"0.8.10"' -DARCH='"i386"' -DOS='"linux"' >-DCOMPILER='"gcc 3.2"' -D__CPU_i386 -DCFG_DIR='"/usr/local/etc/ser/"' >-DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DADAPTIVE_WAIT >-DADAPTIVE_WAIT_LOOPS=1024 -DDNS_IP_HACK -DUSE_IPV6 -DDBG_QM_MALLOC >-DFAST_LOCK -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD >-c acc.c -o acc.o >gcc -fPIC -DPIC -O9 -funroll-loops -Wcast-align -Wall >-minline-all-stringops -malign-double -falign-loops -march=athlon >-DNAME='"ser"' -DVERSION='"0.8.10"' -DARCH='"i386"' -DOS='"linux"' >-DCOMPILER='"gcc 3.2"' -D__CPU_i386 -DCFG_DIR='"/usr/local/etc/ser/"' >-DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DADAPTIVE_WAIT >-DADAPTIVE_WAIT_LOOPS=1024 -DDNS_IP_HACK -DUSE_IPV6 -DDBG_QM_MALLOC >-DFAST_LOCK -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD >-c acc_mod.c -o acc_mod.o >gcc -shared -Wl,-O2 -Wl,-E acc.o acc_mod.o -o acc.so >/usr/lib/gcc-lib/i486-suse-linux/3.2/../../../../i486-suse-linux/bin/ld: >unrecognized option '--eh-frame-hdr' >/usr/lib/gcc-lib/i486-suse-linux/3.2/../../../../i486-suse-linux/bin/ld: >use the --help option for usage information >collect2: ld returned 1 exit status >make[1]: *** [acc.so] Error 1 >make[1]: Leaving directory >`/home/sinan/SIP_Project/OpenSourceServers/IPTEL/ser-0.8.10/modules/acc' > > >make[1]: Entering directory >`/home/sinan/SIP_Project/OpenSourceServers/IPTEL/ser-0.8.10/modules/auth' > >../../Makefile.rules:77: auth_mod.d: No such file or directory >../../Makefile.rules:77: authorize.d: No such file or directory >../../Makefile.rules:77: challenge.d: No such file or directory >../../Makefile.rules:77: checks.d: No such file or directory >../../Makefile.rules:77: common.d: No such file or directory >../../Makefile.rules:77: group.d: No such file or directory >../../Makefile.rules:77: nonce.d: No such file or directory >../../Makefile.rules:77: rfc2617.d: No such file or directory >make[1]: Leaving directory >`/home/sinan/SIP_Project/OpenSourceServers/IPTEL/ser-0.8.10/modules/auth' > >make[1]: Entering directory >`/home/sinan/SIP_Project/OpenSourceServers/IPTEL/ser-0.8.10/modules/auth' > >gcc -fPIC -DPIC -O9 -funroll-loops -Wcast-align -Wall >-minline-all-stringops -malign-double -falign-loops -march=athlon >-DNAME='"ser"' -DVERSION='"0.8.10"' -DARCH='"i386"' -DOS='"linux"' >-DCOMPILER='"gcc 3.2"' -D__CPU_i386 -DCFG_DIR='"/usr/local/etc/ser/"' >-DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DADAPTIVE_WAIT >-DADAPTIVE_WAIT_LOOPS=1024 -DDNS_IP_HACK -DUSE_IPV6 -DDBG_QM_MALLOC >-DFAST_LOCK -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD >-c auth_mod.c -o auth_mod.o >gcc -fPIC -DPIC -O9 -funroll-loops -Wcast-align -Wall >-minline-all-stringops -malign-double -falign-loops -march=athlon >-DNAME='"ser"' -DVERSION='"0.8.10"' -DARCH='"i386"' -DOS='"linux"' >-DCOMPILER='"gcc 3.2"' -D__CPU_i386 -DCFG_DIR='"/usr/local/etc/ser/"' >-DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DADAPTIVE_WAIT >-DADAPTIVE_WAIT_LOOPS=1024 -DDNS_IP_HACK -DUSE_IPV6 -DDBG_QM_MALLOC >-DFAST_LOCK -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD >-c authorize.c -o authorize.o >gcc -fPIC -DPIC -O9 -funroll-loops -Wcast-align -Wall >-minline-all-stringops -malign-double -falign-loops -march=athlon >-DNAME='"ser"' -DVERSION='"0.8.10"' -DARCH='"i386"' -DOS='"linux"' >-DCOMPILER='"gcc 3.2"' -D__CPU_i386 -DCFG_DIR='"/usr/local/etc/ser/"' >-DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DADAPTIVE_WAIT >-DADAPTIVE_WAIT_LOOPS=1024 -DDNS_IP_HACK -DUSE_IPV6 -DDBG_QM_MALLOC >-DFAST_LOCK -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD >-c challenge.c -o challenge.o >gcc -fPIC -DPIC -O9 -funroll-loops -Wcast-align -Wall >-minline-all-stringops -malign-double -falign-loops -march=athlon >-DNAME='"ser"' -DVERSION='"0.8.10"' -DARCH='"i386"' -DOS='"linux"' >-DCOMPILER='"gcc 3.2"' -D__CPU_i386 -DCFG_DIR='"/usr/local/etc/ser/"' >-DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DADAPTIVE_WAIT >-DADAPTIVE_WAIT_LOOPS=1024 -DDNS_IP_HACK -DUSE_IPV6 -DDBG_QM_MALLOC >-DFAST_LOCK -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD >-c checks.c -o checks.o >gcc -fPIC -DPIC -O9 -funroll-loops -Wcast-align -Wall >-minline-all-stringops -malign-double -falign-loops -march=athlon >-DNAME='"ser"' -DVERSION='"0.8.10"' -DARCH='"i386"' -DOS='"linux"' >-DCOMPILER='"gcc 3.2"' -D__CPU_i386 -DCFG_DIR='"/usr/local/etc/ser/"' >-DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DADAPTIVE_WAIT >-DADAPTIVE_WAIT_LOOPS=1024 -DDNS_IP_HACK -DUSE_IPV6 -DDBG_QM_MALLOC >-DFAST_LOCK -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD >-c common.c -o common.o >gcc -fPIC -DPIC -O9 -funroll-loops -Wcast-align -Wall >-minline-all-stringops -malign-double -falign-loops -march=athlon >-DNAME='"ser"' -DVERSION='"0.8.10"' -DARCH='"i386"' -DOS='"linux"' >-DCOMPILER='"gcc 3.2"' -D__CPU_i386 -DCFG_DIR='"/usr/local/etc/ser/"' >-DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DADAPTIVE_WAIT >-DADAPTIVE_WAIT_LOOPS=1024 -DDNS_IP_HACK -DUSE_IPV6 -DDBG_QM_MALLOC >-DFAST_LOCK -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD >-c group.c -o group.o >gcc -fPIC -DPIC -O9 -funroll-loops -Wcast-align -Wall >-minline-all-stringops -malign-double -falign-loops -march=athlon >-DNAME='"ser"' -DVERSION='"0.8.10"' -DARCH='"i386"' -DOS='"linux"' >-DCOMPILER='"gcc 3.2"' -D__CPU_i386 -DCFG_DIR='"/usr/local/etc/ser/"' >-DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DADAPTIVE_WAIT >-DADAPTIVE_WAIT_LOOPS=1024 -DDNS_IP_HACK -DUSE_IPV6 -DDBG_QM_MALLOC >-DFAST_LOCK -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD >-c nonce.c -o nonce.o >gcc -fPIC -DPIC -O9 -funroll-loops -Wcast-align -Wall >-minline-all-stringops -malign-double -falign-loops -march=athlon >-DNAME='"ser"' -DVERSION='"0.8.10"' -DARCH='"i386"' -DOS='"linux"' >-DCOMPILER='"gcc 3.2"' -D__CPU_i386 -DCFG_DIR='"/usr/local/etc/ser/"' >-DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DADAPTIVE_WAIT >-DADAPTIVE_WAIT_LOOPS=1024 -DDNS_IP_HACK -DUSE_IPV6 -DDBG_QM_MALLOC >-DFAST_LOCK -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD >-c rfc2617.c -o rfc2617.o >gcc -shared -Wl,-O2 -Wl,-E auth_mod.o authorize.o challenge.o checks.o >common.o group.o nonce.o rfc2617.o -o auth.so >/usr/lib/gcc-lib/i486-suse-linux/3.2/../../../../i486-suse-linux/bin/ld: >unrecognized option '--eh-frame-hdr' >/usr/lib/gcc-lib/i486-suse-linux/3.2/../../../../i486-suse-linux/bin/ld: >use the --help option for usage information >collect2: ld returned 1 exit status >make[1]: *** [auth.so] Error 1 >make[1]: Leaving directory >`/home/sinan/SIP_Project/OpenSourceServers/IPTEL/ser-0.8.10/modules/auth' > >***************************************************************

21 years, 2 months

[Serusers] MY MAIN QUESTION: SIP Router Express (ser-0.8.10) Compilation on SuSe 8.0

by Savasar Sinan UYGUR

Hello, Above all my questions before, i would like to make everything clear from the beginning. I was trying to IPTEL express router under the directory which came after unzipping ser-0.8.10_src.tar.gz with the command "tar -xzvf" on my SuSe-Linux 8.0 machine with kernel 2.4.18-4GB . I got some errors during compilation. Is this version 0.8.10 compatible with SuSe 8.0? When not with which SuSe Linux distributions is it working properly? Could you send me compilation and installation procedures or refer to the related files if possible? Waiting for your reply, Best regards,

21 years, 2 months

[Serusers] Modify existing Sessions with SER?

by Karsten Knuettel

Hi *, we have a 3PCC-scenario and we want to modify an existing session. (Change IP and Port an UA is listening to) In RFC 3261 section 14 is described how to modify existing sessions throught an re-Invite but SER sends me an OK without sending the 2nd Invite to the UAC. Can you imagine what I have done wrong? (My scenario acts like Flow II in draft-ietf-sipping-3pcc-02.txt, becourse my UAC is buggy and gives me to to an Invite without SDP a 500) (The Screenshots of my test are attached) Thank you! Karsten

21 years, 2 months

[Serusers] SER and TCP

by Cinzia Raineri

Hello, I would like know if SER support also the trasmission protocol TCP, or TLS. Thanks, Cinzia.

21 years, 2 months

[Serusers] SIP2Jabber Presence Support

by jaime.gill＠orange.co.uk

Daniel, Not sure if it has been asked before. Is presence support from SIP to Jabber and viceversa completely working in cvs version? Regards, Jaime ******************************************************************************* Important. Confidentiality: This communication is intended for the above-named person and may be confidential and/or legally privileged. Any opinions expressed in this communication are not necessarily those of the company. If it has come to you in error you must take no action based on it, nor must you copy or show it to anyone; please delete/destroy and inform the sender immediately. Monitoring/Viruses Orange may monitor all incoming and outgoing emails in line with current legislation. Although we have taken steps to ensure that this email and attachments are free from any virus, we advise that in keeping with good computing practice the recipient should ensure they are actually virus free. Orange PCS Limited is a subsidiary of Orange SA and is registered in England No 2178917, with its address at St James Court, Great Park Road, Almondsbury Park, Bradley Stoke, Bristol BS32 4QJ. *******************************************************************************

21 years, 2 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users January 2003