sr-users January 2003

sr-users@lists.kamailio.org

47 participants
77 discussions

by Jev

Hello all, Im using ser, with esteras softphone, and a couple of cisco ata186's. I have to say I really like ser, as it is small fast, and reliable without being over complicated. I would like to know what other ser users and developers use for pstn gateways? I have a openline4 card from voictronix, but there is no software support for sip (When I bought it I thought I would use h.323). I have looked at cisco's pstn gateway modules, but was turned off them because of price, and lack of clear straight forward information to name but two reasons. Ideally what I would like to have is a solution that would support at least 4 pstn lines (expandable to maybe 8), that would run on FreeBSD (or at worst linux), works well with sip & ser, with high quality audio, and minimal delays when dialing in out. TIA, -Emil

21 years, 6 months

[Serusers] User Based Dialplans

by Fernando Nachtigall

Hi All, I need to implement an used based dialplans module on SER, so that depending on the user information stored in the database, a certain prefix should be inserted in the called number. Has anyone had a similar issue? Thanks Fernando --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.474 / Virus Database: 272 - Release Date: 4/18/2003

21 years, 7 months

[Serusers] Rewriting URI in the Contact field

by Maxim Sobolev

Folks, I need an advise on how to better implement one feature, which isn't currently present in SER. We need to allow UAs behind NAT properly register with the registrar - by "properly" I mean that host:port portion of URI in Contact field should not be used, but host:port the request came from should be used instead. By definition we know that those UAs will support symmetric SIP signalling, so that this scheme will work just fine. In my opinion there are two ways to do it: either add new rewritecontact* family of functions similar to rewritehost ones. or add a new flag for the save() function. This is where I need your help - which implementation looks better for you (or maybe you have even some better idea), since we are really interested in inclusion of our changes into the mainline to reduce our local hacks. Regards, Maxim

21 years, 10 months

[Serusers] Some patches for integration

by Maxim Sobolev

Folks, Attached please find several patches for ser 0.8.10. They do the following: 1. Removes hardcoded `/usr/local' from Makefiles and replaces it with LOCALBASE variable setable in the top Makefile.defs. This should make life of packagers easier. 2. Allows to override PREFIX variable with something else from environment. 3. Adds support for FreeBSD doc/man directories layout. 4. Adds some missed -I's into radius modules. 5. Fixes radius modules to use the same symbolic avp names as in dictionary. 6. Adds support for recording source port in msg structure and adds it in "Noisy feedback". This should be extremely useful for debugging various SIP&NAT scenarios and later could be re-used to implement `rport' support described in my previous message. It would be nice to have those patches integrated into the next release. Thanks! -Maxim

21 years, 10 months

[Serusers] NAT Traversal Technique Survey

by Jiri Kuthan

Folks, please help me -- share with me techniques for NAT traversal you use and have hands-on experience with. People repeatedly ask about it, and I'd like to create an FAQ that reflects deployment experience and as wide user feed-back as possible. Just tell me the technique you use, its requirements, limitations, the devices it is known (not) to work with, why you prefer one method over the other, etc. I'll then try to compile it in an FAQ. So please send me an e-mail, an example is attached. I will appreciate any practical details. Thank you, -Jiri ---------------------------------------------------------------- technique: using symmetric communication requirements: phone devices that support symmetric communication; existing species: Cisco's ATA configuration practice: ATAs need to be configured to advertise public address in signaling, or learn it from REGISTER replies; alternatively, one can rewrite signaling using ser's nethelper module; one needs to rewrite SIP anyway because ATAs don't advertise their symmetricity; see www.foo.bar for info on configuring ATA... limitations: non-symmetric devices, like Messenger don't work; misc: ATA has no display, that's why I am anxiously waiting for more vendors to support symmetric signaling ---------------------------------------------------------------- technique: UPnP requirements: NATs and phones with UPnP support; Messenger and snom are known to support UPnP; there is linux support for it configuration practice: of course, upnp requires by definition no configuration ;-) (I'm not serious -- anyone actually tried it?) ---------------------------------------------------------------- technique: geek tweaks: set-up port forwading manually configuration practice: you need to configure NATs to split its public-side port numbers accross your private-side phones, and configure the phones (if they allows so) to use these port numbers; also, phones need to be configured to use publicly reachable address in their payloads requriements: configurable NATs (many residental NATs are configurable) and configurable phones (ATAs do that, I heard pingtel did it too) ---------------------------------------------------------------- technique: ALG requirements: SIP-capable NAT (like Intertex or Cisco/PIX) issues: intertex freezes my ssh connections after some time on-line and elderly models don't like all Ethernet devices; when things don't work, the red-button off-on helps sometimes ---------------------------------------------------------------- technique: STUN requirements: STUN-enabled phone (like k-phone, snom) limitations: doesn't work over symmetric NATs (words-of-mouth propaganda has been telling me that many residential NATs are fortunately not symmetric, but I don't know how objective this information really is) ---------------------------------------------------------------- -- Jiri Kuthan http://iptel.org/~jiri/

21 years, 10 months

[Serusers] Routing to the PSTN

by Phillip Haynes

Hi, I have set up the SER and its working. The only problem is I cant get the routing logic to simultaneously route to either the User Loc or the PSTN. Its only doing one of the other. I am new to SIP, can u show me a sample script that will do both at the same time? Best regards, Phillip

21 years, 10 months

[Serusers] Windows Messenger authentication fails.

by Ivan Vignola

Hi, I have successfully (I think that) installed SER server with ser-mysql package. I have set the environment variable 'SIP_DOMAIN="192.168.11.237"' (that is server IP address). I have succesfully added a user to subscriber table: 'serctl add ivan ivanpswd ivan(a)hotmail.com', but registering WM to server fails: URI = 'ivan(a)192.168.11.237' Passwowd = 'ivanpswd' User = 'ivan' This is my ser.cfg file: # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- loadmodule "//usr/lib/ser/modules/mysql.so" loadmodule "//usr/lib/ser/modules/sl.so" loadmodule "//usr/lib/ser/modules/tm.so" loadmodule "//usr/lib/ser/modules/rr.so" loadmodule "//usr/lib/ser/modules/maxfwd.so" loadmodule "//usr/lib/ser/modules/usrloc.so" loadmodule "//usr/lib/ser/modules/registrar.so" loadmodule "//usr/lib/ser/modules/auth.so" # ----------------- setting module-specific parameters --------------- modparam("usrloc", "db_mode", 2) modparam("auth", "db_url", "sql://ser:heslo@localhost/ser") modparam("auth", "calculate_ha1", yes) modparam("auth", "password_column", "password") # ------------------------- request routing logic ------------------- alias="engiweb.com" alias="sip.engiweb.com" route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; rewriteFromRoute(); if (uri=~"^sip:(.+@)?(192\.168\.11\.237|(sip\.)?engiweb\.com)([:;\?].*)?$") { if (method=="REGISTER") { if (!www_authorize("192.168.11.237", "subscriber")) { if (!proxy_authorize("192.168.11.237", "subscriber")) { www_challenge("engiweb.org", "0"); break; }; save("location"); break; }; lookup("aliases"); if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; if (!t_relay()) { sl_reply_error(); }; } What could be the problem? Best regards. Ivan Vignola. _________________________________________________________________ MSN Extra Storage: piena libertà di esprimersi e comunicare http://www.msn.it/msnservizi/es/extra_storage_tag/

21 years, 10 months

RE: [Serusers] user permission problem on ser-jabber gw

by Toni Barata (EPS)

Hi Daniel, The problem related with the permition to use de jabber gateway seems to be solved. Now I have a new problem. In the same scenario (Messenger sending a message to Jabber client) the messenger receives from the jabber gw the following error message: " ERROR:Connection to Jabber server lost. You have to login to Jabber server again (join the conferences again that you were participating, too)<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" />" Can you figure what is happening here? Thanks, Toni -----Original Message----- From: Daniel-Constantin MIERLA [mailto:mierla@fokus.fraunhofer.de] Sent: sexta-feira, 31 de Janeiro de 2003 12:51 To: Toni Barata (EPS) Cc: 'serusers(a)lists.iptel.org' Subject: Re: [Serusers] user permission problem on ser-jabber gw Hello, the SIP_ID field must be the SIP URI of the SIP user (e.g. ' sip:user1@mydomain.com <mailto:sip:user1@mydomain.com> ') -- that is for fast matching - From tag includes sip: in address of the origin. If you check the manual or the mail I pointed, the samples show that. Toni Barata (EPS) wrote: Hi Daniel, I have done this (creating the database sip_jab) before sending my first email. Regarding the association of SIP users with Jabber IDs, I have added an entry on table jusers this way on mysql: mysql> INSERT INTO jusers VALUES ('1','user1','user1',' user1(a)mydomain.com <mailto:user1@mydomain.com> ','0'); Should it be done this way or there are others ways to do it? If you take the sources of the module, in directory 'doc' you can find some perl or php scripts which can help you. You have to change the values from the beginning of scripts according with your configuration. The same problem persists. Try again now. Regards, Daniel Regards, Toni -----Original Message----- From: Daniel-Constantin MIERLA [ mailto:mierla@fokus.fraunhofer.de <mailto:mierla@fokus.fraunhofer.de> ] Sent: quinta-feira, 30 de Janeiro de 2003 19:54 To: Toni Barata (EPS) Cc: ' serusers(a)lists.iptel.org <mailto:serusers@lists.iptel.org> ' Subject: Re: [Serusers] user permission problem on ser-jabber gw Hello, you have to create the database for SIMPLE2Jabber gateway and after that you have to associate SIP users with Jabber IDs. I wrote a manual for gateway, but is more related to next ser release. Anyway, the database is the same, exported methods too, only some parameters has changed. The database can be created using sql script from CVS http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/modules/jabber/doc/ <http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/modules/jabber/doc /> xjab.sql?rev=1.1&content-type=text/vnd.viewcvs-markup or from manual http://www.iptel.org/ser/doc/jabgw/xjab-manual.html#5._Admins_guide <http://www.iptel.org/ser/doc/jabgw/xjab-manual.html#5._Admins_guide> It might provide a good help to read next message (especially last part of it) posted on this list http://lists.iptel.org/pipermail/serusers/2002-December/000049.html <http://lists.iptel.org/pipermail/serusers/2002-December/000049.html> After that if you still have problems do not hesitate to post a new message on the list. Best regards, Daniel Toni Barata (EPS) wrote: Hi folks, ( I think!) I have successfully installed SER server with the ser-mysql and ser-jabber packages ( I have also a mysql server and a Jabber server running). For testing I have established a SIP IM session between two MS Messengers and it did work. After this I have tried to establish a IM session between a user SIP (MS Messenger) and a user Jabber (Exodus), but when the messenger sends a message for the jabber gateway the following error occurs: "ERROR: Your message was not sent. You do not have permision to use the gateway." What could be the problem here? Best regards, Toni _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org <mailto:serusers@lists.iptel.org> http://lists.iptel.org/mailman/listinfo/serusers <http://lists.iptel.org/mailman/listinfo/serusers> _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org <mailto:serusers@lists.iptel.org> http://lists.iptel.org/mailman/listinfo/serusers <http://lists.iptel.org/mailman/listinfo/serusers>

21 years, 10 months

Re: [Serusers] Windows Messenger authentication fails.

by Ivan Vignola

Hi Nils, thank you for your suggestion. 192.168.11.237 is my sever IP address and realm. I've added a user with USER_ID=ivan(a)192.168.11.237 PASSWORD=ivanpswd EMAIL-ADDRESS=ivan(a)hotmail.com in subscriber table as you wrote e I'm trying to register WM: ACCOUNT=ivan(a)192.168.11.237 PASSWORD=ivanpswd USER=ivan(a)192.168.11.237 Authentication doesn't work!!! Where am I wrong? Thank you in advance. Ivan. >From: Nils Ohlmeier <nils(a)ohlmeier.de> >To: "Ivan Vignola" <ivanvignola(a)hotmail.com>, serusers(a)lists.iptel.org >Subject: Re: [Serusers] Windows Messenger authentication fails. >Date: Fri, 31 Jan 2003 14:36:47 +0100 > >Hi Ivan, > >the problem with WM is that the address of the server have to be the same >as >the domain part of the URI (which is not RFC conform). For example you have >to add ivan(a)192.168.11.237 to the subscriber table and also use this >account >within your WM to get authentication working. > >Regards > Nils Ohlmeier > >On Friday 31 January 2003 13:30, Ivan Vignola wrote: > > Hi, > > I have successfully (I think that) installed SER server with ser-mysql > > package. > > I have set the environment variable 'SIP_DOMAIN="192.168.11.237"' (that >is > > server IP address). > > I have succesfully added a user to subscriber table: 'serctl add ivan > > ivanpswd ivan(a)hotmail.com', but registering WM to server fails: > > URI = 'ivan(a)192.168.11.237' > > Passwowd = 'ivanpswd' > > User = 'ivan' > > > > This is my ser.cfg file: > > > > > > # ----------- global configuration parameters ------------------------ > > > > debug=3 # debug level (cmd line: -dddddddddd) > > fork=yes > > log_stderror=yes # (cmd line: -E) > > check_via=no # (cmd. line: -v) > > dns=no # (cmd. line: -r) > > rev_dns=no # (cmd. line: -R) > > port=5060 > > children=4 > > fifo="/tmp/ser_fifo" > > > > # ------------------ module loading ---------------------------------- > > > > loadmodule "//usr/lib/ser/modules/mysql.so" > > loadmodule "//usr/lib/ser/modules/sl.so" > > loadmodule "//usr/lib/ser/modules/tm.so" > > loadmodule "//usr/lib/ser/modules/rr.so" > > loadmodule "//usr/lib/ser/modules/maxfwd.so" > > loadmodule "//usr/lib/ser/modules/usrloc.so" > > loadmodule "//usr/lib/ser/modules/registrar.so" > > loadmodule "//usr/lib/ser/modules/auth.so" > > > > > > > > # ----------------- setting module-specific parameters --------------- > > > > modparam("usrloc", "db_mode", 2) > > modparam("auth", "db_url", "sql://ser:heslo@localhost/ser") > > modparam("auth", "calculate_ha1", yes) > > modparam("auth", "password_column", "password") > > > > # ------------------------- request routing logic ------------------- > > > > alias="engiweb.com" > > alias="sip.engiweb.com" > > > > route{ > > if (!mf_process_maxfwd_header("10")) { > > sl_send_reply("483","Too Many Hops"); > > break; > > }; > > if (len_gt( max_len )) { > > sl_send_reply("513", "Message too big"); > > break; > > }; > > > > rewriteFromRoute(); > > > > if > > (uri=~"^sip:(.+@)?(192\.168\.11\.237|(sip\.)?engiweb\.com)([:;\?].*)?$") >{ > > > > > > if (method=="REGISTER") { > > > > if (!www_authorize("192.168.11.237", "subscriber")) { > > if (!proxy_authorize("192.168.11.237", "subscriber")) { > > www_challenge("engiweb.org", "0"); > > break; > > }; > > > > > > save("location"); > > break; > > }; > > > > lookup("aliases"); > > if (!lookup("location")) { > > sl_send_reply("404", "Not Found"); > > break; > > }; > > }; > > > > if (!t_relay()) { > > sl_reply_error(); > > }; > > > > } > > > > What could be the problem? > > > > Best regards. > > > > Ivan Vignola. > > > > > > > > > > > > > > _________________________________________________________________ > > MSN Extra Storage: piena libertà di esprimersi e comunicare > > http://www.msn.it/msnservizi/es/extra_storage_tag/ > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > >-- >gpg-key: http://www.ohlmeier.org/public_key.asc ><< attach3 >> _________________________________________________________________ Vuoi ricevere fantastiche offerte promozionali via email? http://www.msn.it/msnservizi/so/

21 years, 10 months

RE: [Serusers] user permission problem on ser-jabber gw

by Toni Barata (EPS)

Hi Daniel, I have done this (creating the database sip_jab) before sending my first email. Regarding the association of SIP users with Jabber IDs, I have added an entry on table jusers this way on mysql: mysql> INSERT INTO jusers VALUES ('1','user1','user1','user1(a)mydomain.com','0'); Should it be done this way or there are others ways to do it? The same problem persists. Regards, Toni -----Original Message----- From: Daniel-Constantin MIERLA [mailto:mierla@fokus.fraunhofer.de] Sent: quinta-feira, 30 de Janeiro de 2003 19:54 To: Toni Barata (EPS) Cc: 'serusers(a)lists.iptel.org' Subject: Re: [Serusers] user permission problem on ser-jabber gw Hello, you have to create the database for SIMPLE2Jabber gateway and after that you have to associate SIP users with Jabber IDs. I wrote a manual for gateway, but is more related to next ser release. Anyway, the database is the same, exported methods too, only some parameters has changed. The database can be created using sql script from CVS http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/modules/jabber/doc/ xjab.sql?rev=1.1&content-type=text/vnd.viewcvs-markup or from manual http://www.iptel.org/ser/doc/jabgw/xjab-manual.html#5._Admins_guide It might provide a good help to read next message (especially last part of it) posted on this list http://lists.iptel.org/pipermail/serusers/2002-December/000049.html After that if you still have problems do not hesitate to post a new message on the list. Best regards, Daniel Toni Barata (EPS) wrote: >Hi folks, > >( I think!) I have successfully installed SER server with the ser-mysql and >ser-jabber packages ( I have also a mysql server and a Jabber server >running). >For testing I have established a SIP IM session between two MS Messengers >and it did work. >After this I have tried to establish a IM session between a user SIP (MS >Messenger) and a user Jabber (Exodus), but when the messenger sends a >message for the jabber gateway the following error occurs: > >"ERROR: Your message was not sent. You do not have permision to use the >gateway." > >What could be the problem here? > >Best regards, >Toni > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers > > >

21 years, 10 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users January 2003