September 2024 - sr-dev

[kamailio/kamailio] [Websocket] websocket:closed sometimes is not fired (Issue #3950)
by Gustavo Almeida 27 Jun '25

27 Jun '25

### Description After carrying out some load tests using the `Websocket` module, I noticed that sometimes the `websocket:closed` event is not triggered. This problem seems to be particularly noticeable when the load is high and simultaneous. Example: 1000 records simultaneously. In the tests carried out, I realized that the number of times the event is not triggered is small, in the order of [1-10]/1000. I check that when I do a `ws.dump` I don't have any active connections, and I confirm that they are all effectively cleaned (`netstat -ano | grep 8061`). However, the event is not triggered for some connections. I can see this in the logs, and also when i display the content of an hash table, i'm dropping key inside `websocket:closed` event. ### Troubleshooting The troubleshooting was simplistic, i.e. I ran the same test n times, and validated that the event was triggered for all connections, the number of `ws` connections listed by `Kamailio`, and the open connections. #### Reproduction To reproduce, we can use any mechanism that emulates the use of the `Websocket` module. For example, I used the `sipexer` tool to create a `wss` connection with `Kamailio`, forcing simultaneous registrations. Example command: `sipexer -cb -mt register -ex 60 -au <user> -ap <pass> -fuser example -fd mydomain -wso https://10.0.0.12:10000 -ruri sip:kamailio -su wss://kamailio:8061` Kamailio TLS listener: `listen=tls:10.0.0.12:8061 advertise PUBLIC_IP` Websocket module: ``` loadmodule "websocket.so" tcp_accept_no_cl=yes ``` ``` event_route[websocket:closed] { xlog("L_NOTICE", "WebSocket connection closed $proto:$si:$sp\n"); <I also delete where a htable key> } ``` #### Debugging Data ``` [root@ ~]$ prcmd ws.dump { connections: { } info: { wscounter: 0 truncated: no } } [root@ ~]$ netstat -ano | grep 8061 tcp 0 0 10.0.0.12:8061 0.0.0.0:* LISTEN off (0.00/0/0) [root ~]$ prcmd htable.dump wsauth | grep "name" | wc -l 3 [root ~]$ cat /var/log/kamailio.log | grep "WebSocket connection closed" | wc -l 997 [root ~]$ cat /var/log/proxy-registrar/proxy-registrar.log | grep "ERR" | grep "WAR" | wc -l 0 ``` #### Log Messages Nothing relevant. #### SIP Traffic Nothing relevant here, the SIP Flow is OK. ### Additional Information ``` version: kamailio 5.6.4 (x86_64/linux) a004cf-dirty flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: a004cf -dirty compiled on 23:17:27 Jun 7 2024 with gcc 4.8.5 ``` * **Operating System**: ``` CentOS Linux release 7.9.2009 (Core) ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3950 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3950(a)github.com>

6 7

[kamailio/kamailio] Writing to $fU or $tU appends to header user (Issue #3165)
by Benoît Panizzon 24 Jun '25

24 Jun '25

Dear Gang Possibly @oej could provide more in-depth information as he has witnessed this issue. Usually the user of the from URI is the phone number displayed at the destination. There are situations where this phone number is translated. As example. In Switzerland, the user is used to see numbers in a local format. National number starting with 0 and international numbers with 00 but on interconnection between telcos, e164 is used. So basically when a call is sent to a customer '+41' is replaced by '0' and '+' is replaced by '00'. Let's start with an example From: header: `From: "Maurice Moss" <sip:+41991234567@example.com>;user=phone` So shortly before the call is sent out to the location of the registered CPE, this is done: ``` if ($fU =~ "^\+41") { $fU = "0" + $(fU{s.substr,3,0}); } else if ($fU = ~ "^\+") { $fU = "00" + $(fU{s.substr,1,0}); } ``` What is sent to the CPE now looks like this: `From: "Maurice Moss" <sip:0991234567@example.com>;user=phone` Now we hit an error like 486 BUSY and the destination has call forwarding active to a mobile phone on another TSP. So we have to send the call out back the IC and numbers need to be translated back to e164. We handle this in a failure route, which in turn could trigger a branch route. So we revert the number back to e164: `$fU = "+41" + $(fU{s.substr,1,0});` Expected outcome: `From: "Maurice Moss" <sip:+41991234567@example.com>;user=phone` Observed outcome: `From: "Maurice Moss" <sip:0991234567+41991234567@example.com>;user=phone` So setting $fU more than once is appending to the user element of the From header URI. This behavior has not been found in any documentation. I have been working around most of the issues by making sure I change $fU (and $tU) at the latest possible time and only once. But in the case described above, I have not been able to come up with a work-around yet. I also can't think of any benefit of the way those PV are handled or any harm that could be done, to handle them differently and make the last 'write' overwrite and previous value, instead of appending. Thank you for looking into this. -Benoît- -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3165 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3165(a)github.com>

3 4

[kamailio/kamailio] Possibly adjusting the SDP parser to be more lenient towards scenarios where a stream is being removed/rejected and connection-information "c=" is only available per media (no session-wide "c=") and the removed/rejected stream omits all fields (Issue #3982)
by thomas414 31 May '25

31 May '25

### Description I encountered an issue with a specific device that is receiving a T.38 fax. The call gets established towards the device normally with inband media, then the device requests T.38 media and tries to remove the audio media via sending port 0 in the ReInvite SDP. Also it sends connection-information only on the media level and there is no "c=" on the session level. Reading through the related RFCs and the kamailio code and discussing this on the mailing list, we came to the conclusion that kamailio is doing everything correct as per RFC. Though we were wondering if it would be possible to adjust the parser to be not as strict as it is right now, and allow a missing "c=" line on the media-level if the stream is removed/rejected via port 0, since i see no sense in requiring connection information. Of course we are also in contact with the vendor to hopefully adjust on their side. Here are the related RFCs: 1. RFC8866 5.7 `A session description MUST contain either at least one "c=" line in each media description or a single "c=" line at the session level. It MAY contain a single session-level "c=" line and additional media-level "c=" line(s) per-media-description, in which case the media-level values override the session-level settings for the respective media.` 2. RFC3264 8.2 `Existing media streams are removed by creating a new SDP with the port number for that stream set to zero. The stream description MAY omit all attributes present previously, and MAY list just a single media format.` At first i was especially confused by the RFC3264 8.2 part, since it seemed correct what the device is sending, but if you read carefully and keep the wording for SDP in mind only attributes ("a=") MAY be omitted. So a "c=" line should still be in the SDP for the removed media if it's not included on the session-level. Or do you see this differently? ### Expected behavior Kamailio allows and parses the SDP when there is no session-wide "c=", a media stream is being removed via port zero and there is no "c=" for this media stream and only the remaining media streams include a "c=" line. #### Actual observed behavior Kamailio throws an error when trying to parse the SDP. #### Log Messages ``` <core> [core/parser/sdp/sdp.c:523]: parse_sdp_session(): can't find media IP in the message ``` #### SIP Traffic ``` v=0 o=xmserver 1726638425 1726638427 IN IP4 169.254.1.1 s=xmserver t=0 0 m=audio 0 RTP/AVP 8 m=image 56002 udptl t38 c=IN IP4 169.254.1.1 a=sendrecv a=T38FaxVersion:0 a=T38MaxBitRate:14400 a=T38FaxFillBitRemoval:0 a=T38FaxTranscodingMMR:0 a=T38FaxTranscodingJBIG:0 a=T38FaxRateManagement:transferredTCF a=T38FaxMaxBuffer:200 a=T38FaxMaxDatagram:72 a=T38FaxUdpEC:t38UDPRedundancy ``` ### Possible Solutions ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.8.3 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, MEM_JOIN_FREE, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_SEND_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 12.2.0 ``` * **Operating System**: ``` Debian 12 Linux hostname 6.1.0-20-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.85-1 (2024-04-11) x86_64 GNU/Linux ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3982 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3982(a)github.com>

3 5

[kamailio/kamailio] Inactive video stream: can't find media IP in the message (Issue #3406)
by schoberw 31 May '25

31 May '25

### Description In some situations the other side UA must reply with an inactive media stream. E.g. if video was added but not supported by the other side. The UAS then must answer with an m=video 0 RTP/.. line. It seams that the video section must contain a c= line with an IP address for rtpengine to function. If there is no c line (no IP address) the SDP body cannot be parsed and thus no RTP proxy is invoked. ### Troubleshooting Not easy to reproduce since the answer must bei "wrong". Is it correct to reply an SDP body (media = video) like this? ``` m=video 0 RTP/AVPF 96 a=label:1 a=inactive a=mid:1 ``` Maybe not (but Audiocodes SBC lates LTS version does it) - so we are dependent on other side now that this service works. #### Reproduction reInvite with Video to a UA that has no video Support (e.g. Bria -> Snom). Drop the c line in the video part with some textops in 200 OK (just to reproduce of course). A -> B, connect the call A -> + video, B has no video support A presses hold #### Log Messages Incoming 200 OK after doing hold with an inactive video: ``` v=0 o=root 436040161 309284577 IN IP4 1.2.3.5 s=call t=0 0 m=audio 14200 RTP/AVPF 9 8 126 c=IN IP4 1.2.3.5 a=ptime:20 a=recvonly a=mid:0 a=rtpmap:9 G722/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:126 telephone-event/8000 a=fmtp:126 0-15 m=video 0 RTP/AVPF 96 a=label:1 a=inactive a=mid:1 Mar 27 17:52:22 c5p05es2-1 /usr/sbin/kamailio[2938205]: ERROR: <core> [core/parser/sdp/sdp.c:490]: parse_sdp_session(): can't find media IP in the message Mar 27 17:52:22 c5p05es2-1 /usr/sbin/kamailio[2938205]: INFO: <script>: >>> Sending Reply: 200 OK (1.2.3.4:443 -> 100.108.48.38:65251) ``` Compare to working SDP parsing: ``` a=rtpmap:9 G722/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:126 telephone-event/8000 a=fmtp:126 0-15 m=video 0 RTP/AVP 96 c=IN IP4 1.2.3.5 a=inactive a=mid:1 Mar 27 18:00:17 c5p05es2-1 /usr/sbin/kamailio[2942881]: INFO: <script>: ONREPLY_ROUTE[FORWARD] Mar 27 18:00:17 c5p05es2-1 /usr/sbin/kamailio[2942881]: INFO: <script>: ROUTE[RTPP_REPLY] Mar 27 18:00:17 c5p05es2-1 /usr/sbin/kamailio[2942881]: INFO: <script>: > 200 with video Mar 27 18:00:17 c5p05es2-1 /usr/sbin/kamailio[2942881]: INFO: <script>: > 200 with inactive video Mar 27 18:00:17 c5p05es2-1 /usr/sbin/kamailio[2942881]: INFO: <script>: > Remove inactive video Mar 27 18:00:17 c5p05es2-1 /usr/sbin/kamailio[2942881]: INFO: <script>: > Answer to WebRTC client: 200 - qijpuibkv6ufhnd282ks Mar 27 18:00:17 c5p05es2-1 /usr/sbin/kamailio[2942881]: INFO: <script>: >>> Sending Reply: 200 OK (91.237.65.14:443 -> 80.108.48.38:65388) ``` ### Possible Solutions Tried to fix in script: ``` if(sdp_with_media("video")) xlog("L_INFO", "> $rs with video"); if(sdp_with_active_media("video")) xlog("L_INFO", "> $rs with active video"); if(!sdp_with_active_media("video")) xlog("L_INFO", "> $rs with inactive video"); if(sdp_with_media("video") && !sdp_with_active_media("video")) { # try fix for RMT#60189 xlog("L_INFO", "> Remove inactive video"); sdp_remove_media("video"); msg_apply_changes(); # needed? } ``` But since sdpops cannot parse it cannot remove the buggy media, too. See the log: non of the xlog is logging. If there is inactive media the c line is not mandatory. The parser should accept this by adding a default IP of 0.0.0.0, if needed Doing tricks with textops is not a easy nor performant solution to accept this wrong SDP from other parties. ### Additional Information ``` version: kamailio 5.6.4 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 10.2.1 ``` * **Operating System**: Debian Bullseye -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3406 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3406(a)github.com>

3 5

[kamailio/kamailio] core: local TCP socket is bound on listening address (PR #3925)
by sergey-safarov 28 May '25

28 May '25

#### Pre-Submission Checklist - [x] Commit message has the format required by CONTRIBUTING guide - [x] Commits are split per component (core, individual modules, libs, utils, ...) - [x] Each component has a single commit (if not, squash them into one commit) - [x] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [x] Small bug fix (non-breaking change which fixes an issue) - [ ] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist: - [x] PR should be backported to stable branches - [x] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description As a local IP address for TCP sending operation the Kamailio service is taking the same network_interface/IP_address, which is used by the service for TCP listening. You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/3925 -- Commit Summary -- * core: local TCP socket is bound on listening address -- File Changes -- M src/core/tcp_main.c (24) -- Patch Links -- https://github.com/kamailio/kamailio/pull/3925.patch https://github.com/kamailio/kamailio/pull/3925.diff -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/3925 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/pull/3925(a)github.com>

5 16

[kamailio/kamailio] Allow single quotes in From name (Issue #3984)
by ThomasSevestre 28 Apr '25

28 Apr '25

### Description `secf_check_sqli_all();` block requests when a single quote is present in From name : ``` From: "O'Reilly" <sip:100@example.net>;tag=abcd ``` Since single quotes are frequent in names. It makes it difficult to use this function. ### Possible Solutions A solution would be to skip single quote check in From name. I'll write the PR if you are OK with this solution -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3984 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3984(a)github.com>

5 10

[kamailio/kamailio] fr_timer documentation mistake (Issue #3939)
by Dmitry Sinina 20 Apr '25

20 Apr '25

Documentation https://www.kamailio.org/docs/modules/devel/modules/tm.html#tm.p.fr_timer says: >Timer which hits if no **final reply** for a request or ACK for a negative INVITE reply arrives (in milliseconds). Looks like it is not correct description - fr_timer value works until 1xx(not **final**) response received and then timer restarted with fr_inv_timer value there: https://github.com/kamailio/kamailio/blob/master/src/modules/tm/t_reply.c#L… Looks like old doc from sip router https://sip-router.org/wiki/ref_manual/timers explains it correctly: > fr_timer This timer is used for all SIP requests. It hits if no reply for an INVITE request or other request has been received (F in milliseconds). If a provisional reply is received for an INVITE (any 1xx), then the fr_inv_timer will be used instead. And if no replies (at all) for an INVITE are received before `fr_timer` hits, the transaction is terminated with a 408 in failure route. -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3939 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3939(a)github.com>

3 10

[kamailio/kamailio] clean_sa(): Error sending delete SAs command via netlink socket: Invalid argument (#2707)
by openspring 16 Apr '25

16 Apr '25

### Description  #### Log Messages  ``` 0(117561) DEBUG: <core> [core/route_struct.c:128]: mk_action(): ACTION type5, i/count 0/1: type 1(1)/ data 0x7f8583620ef0 0(117561) DEBUG: <core> [core/route_struct.c:128]: mk_action(): ACTION type16, i/count 0/3: type 22(16)/ data 0x7f8583621ad8 0(117561) DEBUG: <core> [core/route_struct.c:128]: mk_action(): ACTION type16, i/count 1/3: type 8(8)/ data 0x7f8583620fd8 0(117561) DEBUG: <core> [core/route_struct.c:128]: mk_action(): ACTION type16, i/count 2/3: type 0(0)/ data 0x7f8500000000 0(117561) DEBUG: <core> [core/route.c:129]: route_add(): mapping routing block (0xb914c0)[MT_indialog_reply] to 6 ERROR: bad config file (1 errors) 0(117561) DEBUG: <core> [core/sr_module.c:765]: destroy_modules(): starting modules destroy phase 0(117561) DEBUG: debugger [debugger_api.c:1267]: dbg_destroy_mod_levels(): Destroyed _dbg_mod_table, size 32 0(117561) ERROR: ims_ipsec_pcscf [ipsec.c:567]: clean_sa(): Error sending delete SAs command via netlink socket: Invalid argument 0(117561) WARNING: ims_ipsec_pcscf [cmd.c:998]: ipsec_cleanall(): Error cleaning IPSec Security associations during startup. 0(117561) ERROR: ims_ipsec_pcscf [ipsec.c:609]: clean_policy(): Error sending delete policies command via netlink socket: Invalid argument 0(117561) WARNING: ims_ipsec_pcscf [cmd.c:1002]: ipsec_cleanall(): Error cleaning IPSec Policies during startup. 0(117561) ERROR: ims_ipsec_pcscf [ims_ipsec_pcscf_mod.c:309]: mod_destroy(): Error destroying spi generator 0(117561) ERROR: ims_ipsec_pcscf [ims_ipsec_pcscf_mod.c:313]: mod_destroy(): Error destroying port generator 0(117561) DEBUG: tm [t_funcs.c:84]: tm_shutdown(): start 0(117561) DEBUG: tm [t_funcs.c:87]: tm_shutdown(): emptying hash table 0(117561) DEBUG: tm [t_funcs.c:89]: tm_shutdown(): removing semaphores 0(117561) DEBUG: tm [t_funcs.c:91]: tm_shutdown(): destroying tmcb lists 0(117561) DEBUG: tm [t_funcs.c:94]: tm_shutdown(): done 0(117561) INFO: <core> [core/sctp_core.c:53]: sctp_core_destroy(): SCTP API not initialized 0(117561) DEBUG: <core> [core/mem/shm.c:289]: shm_destroy_manager(): destroying memory manager: q_malloc 0(117561) DEBUG: <core> [core/mem/q_malloc.c:1185]: qm_shm_lock_destroy(): destroying the shared memory lock 0(117561) DEBUG: <core> [core/mem/pkg.c:98]: pkg_destroy_manager(): destroying memory manager: q_malloc ``` ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.4.4 (x86_64/linux) 8d6c2b flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 8d6c2b compiled on 22:26:30 Apr 11 2021 with gcc 4.8.5 ``` * **Operating System**:  ``` NAME="CentOS Linux" VERSION="7 (Core)" ID="centos" ID_LIKE="rhel fedora" VERSION_ID="7" PRETTY_NAME="CentOS Linux 7 (Core)" ANSI_COLOR="0;31" CPE_NAME="cpe:/o:centos:centos:7" HOME_URL="https://www.centos.org/" BUG_REPORT_URL="https://bugs.centos.org/" CENTOS_MANTISBT_PROJECT="CentOS-7" CENTOS_MANTISBT_PROJECT_VERSION="7" REDHAT_SUPPORT_PRODUCT="centos" REDHAT_SUPPORT_PRODUCT_VERSION="7" ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2707

5 5

[kamailio/kamailio] topos: add enable_register_publish (PR #3766)
by Harish S 09 Mar '25

09 Mar '25

Added enable_register_publish parameter to enable REGISTER and PUBLISH method for topos If set to 1 REGISTER and PUBLISH will be enabled for topos Currently only via header will be applied for topos and if mask_callid is set to 1 call-ID will be masked. Other headers should be manged by the user as required.   #### Pre-Submission Checklist    - [x] Commit message has the format required by CONTRIBUTING guide - [x] Commits are split per component (core, individual modules, libs, utils, ...) - [ ] Each component has a single commit (if not, squash them into one commit) - [ ] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [ ] Small bug fix (non-breaking change which fixes an issue) - [ ] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [ ] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description  You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/3766 -- Commit Summary -- * add enable_register_publish -- File Changes -- M src/modules/topos/topos_mod.c (2) M src/modules/topos/tps_msg.c (132) M src/modules/topos/tps_msg.h (2) M src/modules/topos/tps_storage.c (6) -- Patch Links -- https://github.com/kamailio/kamailio/pull/3766.patch https://github.com/kamailio/kamailio/pull/3766.diff -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/3766 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/pull/3766(a)github.com>

5 39

[kamailio/kamailio] topos:added get_callid_mask/get_callid_unmask funtion for handeling Refer-To header (PR #3872)
by Harish S 09 Mar '25

09 Mar '25

Topos: Added get_callid_mask functin which will give the masked callID if actual callID is given and get_callid_unmask function which will unmask the given call-ID. This funtion is useful when the client sends a refer methord with refer-to header containing call-id  #### Pre-Submission Checklist    - [x] Commit message has the format required by CONTRIBUTING guide - [x] Commits are split per component (core, individual modules, libs, utils, ...) - [x] Each component has a single commit (if not, squash them into one commit) - [x] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [ ] Small bug fix (non-breaking change which fixes an issue) - [x] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [x] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description  You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/3872 -- Commit Summary -- * add funtion to mask/unmask callID * get_callid_mask /get_callid_unmask Document Update -- File Changes -- M src/modules/topos/doc/topos_admin.xml (87) M src/modules/topos/topos_mod.c (183) -- Patch Links -- https://github.com/kamailio/kamailio/pull/3872.patch https://github.com/kamailio/kamailio/pull/3872.diff -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/3872 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/pull/3872(a)github.com>

4 12