September 2014 - sr-dev

[tracker] Assignee added: Assignment operators don't work
by sip-router 04 Sep '26

04 Sep '26

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. A user has added themself to the list of users assigned to this task. FS#100 - Assignment operators don't work User who did this - Alex Hermann (axlh) http://sip-router.org/tracker/index.php?do=details&task_id=100 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

11 10

git:master: pv: use suip2a(...) for $snd(..)
by Daniel-Constantin Mierla 04 Dec '25

04 Dec '25

Module: sip-router Branch: master Commit: e151a9e99b1fed7805eaed5d16ca3d6466e1f517 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=e151a9e… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Mon Jul 18 22:37:07 2011 +0200 pv: use suip2a(...) for $snd(..) - fixes FS#140, reported by Klaus Darilion --- modules_k/pv/pv_branch.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/modules_k/pv/pv_branch.c b/modules_k/pv/pv_branch.c index a9dd1bc..4081429 100644 --- a/modules_k/pv/pv_branch.c +++ b/modules_k/pv/pv_branch.c @@ -395,7 +395,7 @@ int pv_get_sndto(struct sip_msg *msg, pv_param_t *param, (int)snd_inf->len); default: /* 0 - ip */ - s.s = su2a(snd_inf->to, sizeof(*snd_inf->to)); + s.s = suip2a(snd_inf->to, sizeof(*snd_inf->to)); s.len = strlen(s.s); return pv_get_strval(msg, param, res, &s); }

2 1

Outbound flow failure handling merged to master
by Hugh Waite 23 Nov '16

23 Nov '16

Hello, As you will see I have merged my branch back into master. These changes add a new event route [tm:branch-failure] to the tm module which is run when any failure response is received on a transaction. The event_route uses a new route type BRANCH_ROUTE which limits the functions that can be run in the route. The functions t_check_status(), t_next_contact_flow(), t_relay() and unregister() can be used in this route. A new pv $T_reply_ruid is accessible in this route which can be used to unregister a single contact entry. The following example route can be used on a registrar to handle failed or invalid flows: event_route[tm:branch-failure] { xlog("L_INFO", "event_route[tm:branch-failure]\n"); if (t_check_status("430|403")) { if (!unregister("location", "$tu", "$T_reply_ruid")) { xlog("L_WARN", "failed to unregister $tu with ruid $T_reply_ruid\n"); } if (!t_next_contact_flow()) { xlog("L_INFO", "No more flows\n"); } else { xlog("L_INFO", "Next flow\n"); t_relay(); } } } Any bugs, memory leaks etc. let me know! Hugh -- Hugh Waite Principal Design Engineer Crocodile RCS Ltd.

4 11

TM possible deadlock
by Jason Penton 09 Apr '15

09 Apr '15

Hi All, I have been experiencing a deadlock when a timeout occurs on a t_relayed() INVITE. Going through the code I have noticed a possible chance of deadlock (without re-entrant enabled). Here is my thinking: t_should_relay_response() is called with REPLY_LOCK when the timer process fires on the fr_inv_timer (no response from the INVITE that was relayed, other than 100 provisional) and a 408 is generated. However, from within that function there are calls to run_failure_handlers() which in turn *could* try and lock the reply (viz. somebody having a t_reply() call in the cfg file - in failure route block). This would result in another lock on the same transaction's REPLY_LOCK.... Has anybody else experienced something like this? this is on master btw. Cheers Jason

2 16

Fw: query related to NOTIFY message size
by Piyush.Bansal＠relianceada.com 17 Oct '14

17 Oct '14

please help ----- Forwarded by Piyush Bansal/RCOM/RelianceADA on 10/10/2013 10:51 AM ----- From: Piyush Bansal/RCOM/RelianceADA To: serusers(a)iptel.org, serdev(a)iptel.org Date: 10/09/2013 12:14 PM Subject: query related to NOTIFY message size Hi there, I have certain queries regarding batch SUBSCRIBE and NOTIFY. I have a user who has 100 buddies in his buddy list. If any of his buddy changes his/her presence status, that user gets a NOTIFY message with presence status of all the 100 buddies. In that case, the message size is exceeding 500 KB. Thats quite a higher value for a UDP packet. Can anybody suggest- 1. If there is any way to restrict the size of the packet. 2. How to ensure that the packet is received correctly by the client. Thanks and Regards, --Piyush Bansal The information contained in this electronic message (email) and any attachments to this email are intended for the exclusive use of the addressee(s) and access to this email by any one else is unauthorised. The email may contain proprietary, confidential or privileged information or information relating to Reliance Group. If you are not the intended recipient, please notify the sender by telephone, fax, or return email and delete this communication and any attachments thereto, immediately from your computer. Any dissemination, distribution, or copying of this communication and the attachments thereto (in whole or part), in any manner, is strictly prohibited and actionable at law. The recipient acknowledges that emails are susceptible to alteration and their integrity can not be guaranteed and that Company does not guarantee that any e-mail is virus-free and accept no liability for any damage caused by any virus transmitted by this email.

4 10

Customize Encryption Algorithm in TLS
by aawaise 12 Oct '14

12 Oct '14

Hello, I have downloaded and unzipped kamailio package available online. I want to know about TLS module, My question is that where is the encryption module located in TLS module ?? Is it in some .c file of TLS module or does TLS module use AES encryption available in LINUX or UNIX systems?? This question arises because I want to customize AES algorithm ?? Can it be done in TLS module or not ?? Regards, Aawaise -- View this message in context: http://sip-router.1086192.n5.nabble.com/Customize-Encryption-Algorithm-in-T… Sent from the Development mailing list archive at Nabble.com.

2 1

RFC: updating default values
by Daniel-Constantin Mierla 02 Oct '14

02 Oct '14

Hello, I am opening this discussion to decide if there is need to adjust some of the default values we have in Kamailio. Many of them were set even like 10 years ago, so they might not be very actual anymore. The main goal is to get the best possible settings for common usage. To start with, here are some values that should be reviewed: - default private memory is 4MB - if the config is not that small, it might not be sufficient free pkg to play with (e.g., for sql_query() result, storage of $var(...) values). Should it be increased to 8MB or other value? Debian/Centos have startup script that sets its value to 8 via command line - default shared memory is 32MB - for a decent deployment with tm, location, lcr/dispatcher, permissions, and anti-flood, it might leave not much free space. Should we double it or set to a different value - usrloc - db_ops_ruid should enabled (1) - seems stable, without it there are problems updating/deleting location records when UA changes the call-id for same contact address. - usrloc - hash_size - now is 9, which results in 512 slots, meaning is ok for few thousands of registered users, for more, performance will decrease when doing save/lookup location -- should it be made 10 (1024 slots for internal hash table)? - auth_db - load_credentials defaults to 'rpid', meaning that the query to get the password will retrieve also the rpid column. I haven't see rpid being used that much lately (replaced by PAI/PPI). I would make this parameter empty by default to avoid querying for an extra column that is likely to be empty. Perhaps there are more, I just wanted to get started. Reply with your comments to above list as well as add new items you thinks their default values should be adjusted. Cheers, Daniel -- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda

4 7

[tracker] Comment added: pid file generated with wrong attributes when starting with -u -g switches
by sip-router 30 Sep '14

30 Sep '14

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task has a new comment added: FS#472 - pid file generated with wrong attributes when starting with -u -g switches User who did this - Daniel-Constantin Mierla (miconda) ---------- As a first remark, mi_fifo module has its own user/group parameters: - http://kamailio.org/docs/modules/devel/modules/mi_fifo.html#idm6280 ---------- More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=472#comment1652 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

1 0

[tracker] Comment added: pid file generated with wrong attributes when starting with -u -g switches
by sip-router 30 Sep '14

30 Sep '14

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task has a new comment added: FS#472 - pid file generated with wrong attributes when starting with -u -g switches User who did this - Ovidiu Sas (osas) ---------- Same issue for fifo and ctl files. ---------- More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=472#comment1651 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

1 0

[tracker] Task opened: pid file generated with wrong attributes when starting with -u -g switches
by sip-router 30 Sep '14

30 Sep '14

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. A new Flyspray task has been opened. Details are below. User who did this - Ovidiu Sas (osas) Attached to Project - sip-router Summary - pid file generated with wrong attributes when starting with -u -g switches Task Type - Bug Report Category - Core Status - New Assigned To - Operating System - All Severity - Low Priority - Normal Reported Version - Development Due in Version - Undecided Due Date - Undecided Details - If kamailio is started with -u -g switches, the PID file should belong to the imposed user/group. Right now, if kamailio is started by root with "-u kamailio -g kamailio" the pid file belongs to root. This will result in failing to remove the pid file is kamailio user tries to restart the service. More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=472 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

1 0