sr-dev December 2022

sr-dev@lists.kamailio.org

11 participants
174 discussions

[kamailio/kamailio] ims_registrar_pcscf: changes for ul db_mode DB_ONLY (PR #3317)

by petermarianF

Enable registration of pcscf contact callback during download from db location table and inserting pcontact (normally this callback is registered during handling of REGISTER). Refuse REGISTER when pcontact is expired since [0 to 20] seconds. Within this time window a NOTIFY is expected from scscf and in order to avoid race time conditions between scscf and pcscf REGISTER will be refused. Refuse REGISTER when pcontact is expired longer than 20 seconds - send PUBLISH (contact expired) to scscf to trigger NOTIFY. In both REGISTER refused scenarios routing script should reply 500 - Deregister in progress.   #### Pre-Submission Checklist    - [ x] Commit message has the format required by CONTRIBUTING guide - [ x] Commits are split per component (core, individual modules, libs, utils, ...) - [ x] Each component has a single commit (if not, squash them into one commit) - [ x] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [ ] Small bug fix (non-breaking change which fixes an issue) - [ x] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [ x] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description  In case a pcontact found in location db has to be inserted into pcscf cache depending on contact state also callbacks have to be registered for this pcontact. Registering of callback_pcscf_contact_cb is enabled in this module. Handling of contact expiry is usually triggered in the scscf (mem_timer_udomain which runs every 10 secs). Sending of NOTIFY to pcscf may take up to 20 seconds from start of expiry due to timing conditions. To avoid race time conditions between a REREGISTER and the expiry handler state machine in the scscf an approach is chosen to refuse a REREGISTER in time window of 20 seconds after pcontact expiry on the pcscf (thus allowing expiry handling to finish). REREGISTER is refused in this scenario with new return_code -2. In case a REREGISTER arrives at pcscf and the respective pcontact is expired longer than time window of 20 seconds registration also is refused with rc -2 and additionaly PUBLISH is sent to scscf with expiry = 0. The rc -2 shall be handled in register.cfg script as follows: pcscf_save_pending("location"); switch ($retcode) { case -1: # Missing/wrong Information in REGISTER. send_reply("400", "Information wrong - See log."); exit; break; case -2: # De-Register in Progress, or PUBLISH ongoing due to registration expiry, # or new REGISTER blocked because registration just expired (up to 20sec). append_to_reply("Retry-After: 30\r\n"); send_reply("500", "Deregister in progress - Please try again"); exit; break; } You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/3317 -- Commit Summary -- * ims_registrar_pcscf: changes for ul db_mode DB_ONLY -- File Changes -- M src/modules/ims_registrar_pcscf/ims_registrar_pcscf_mod.c (21) M src/modules/ims_registrar_pcscf/notify.c (4) M src/modules/ims_registrar_pcscf/save.c (37) -- Patch Links -- https://github.com/kamailio/kamailio/pull/3317.patch https://github.com/kamailio/kamailio/pull/3317.diff -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/3317 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/pull/3317(a)github.com>

1 week

[kamailio/kamailio] tls.reload during tls relaying cause tls memory double free (Issue #3319)

by JiangHai2011

### Description during tls relaying, do tls.reload repeatedly, tcp receiver task will crash ### Troubleshooting #### Reproduction (1)write a simple request_route logic in kamailio.cfg, as follows: request_route { add_local_rport(); $du = "sip:192.168.131.190:1001;transport=tls"; forward(); } (2)start sipp caller to kamailio tls:0.0.0.0:5061 and kamailio will relay this request to callee (3)at the same time, in another console, run the following cmds: while true; do /opt/kamailio/sbin/kamcmd tls.reload && sleep 0.1&& echo `date`; done; #### Debugging Data ``` (gdb) bt full #0 0x00007f69569e81f7 in raise () from /lib64/libc.so.6 No symbol table info available. #1 0x00007f69569e98e8 in abort () from /lib64/libc.so.6 No symbol table info available. #2 0x00000000006d59cf in tlsf_free (tlsf=0x7f6920869000, ptr=0x7f6927ca74b8, file=0x7f694ccb73e4 "tls: tls_init.c", function=0x7f694ccb8b7e <__FUNCTION__.23358> "ser_free", line=323, mname=0x7f694ccb73e0 "tls") at core/mem/tlsf_malloc.c:1031 control = 0x7f6920869000 block = 0x7f6927ca7488 __FUNCTION__ = "tlsf_free" #3 0x00000000006da1ee in tlsf_shm_free (tlsfmp=0x7f6920869000, p=0x7f6927ca74b8, file=0x7f694ccb73e4 "tls: tls_init.c", func=0x7f694ccb8b7e <__FUNCTION__.23358> "ser_free", line=323, mname=0x7f694ccb73e0 "tls") at core/mem/tlsf_malloc.c:1544 No locals. #4 0x00007f694cc68cea in ser_free (ptr=0x7f6927ca74b8, fname=0x7f694c6fba75 "crypto/err/err.c", fline=450) at tls_init.c:323 __FUNCTION__ = "ser_free" #5 0x00007f694c617de3 in CRYPTO_free (str=0x7f6927ca74b8, file=0x7f694c6fba75 "crypto/err/err.c", line=450) at crypto/mem.c:299 No locals. #6 0x00007f694c5e656a in ERR_clear_error () at crypto/err/err.c:450 i = 1 es = 0x7f69208d17e8 #7 0x00007f694c9f8fbc in state_machine (s=0x7f6927ca4e58, server=1) at ssl/statem/statem.c:311 buf = 0x0 cb = 0x0 st = 0x7f6927ca4ea0 ret = -1 ssret = 57 #8 0x00007f694c9f8f17 in ossl_statem_accept (s=0x7f6927ca4e58) at ssl/statem/statem.c:255 No locals. ---Type <return> to continue, or q <return> to quit--- #9 0x00007f694c9dfd81 in SSL_do_handshake (s=0x7f6927ca4e58) at ssl/ssl_lib.c:3661 ret = 1 #10 0x00007f694c9dbfb9 in SSL_accept (s=0x7f6927ca4e58) at ssl/ssl_lib.c:1652 No locals. #11 0x00007f694cc9048e in tls_accept (c=0x7f6927c9f2a8, error=0x7ffe3a31e894) at tls_server.c:468 ret = 1 ssl = 0x7f6927ca4e58 cert = 0x0 tls_c = 0x7f6927c9ed50 tls_log = 32617 __FUNCTION__ = "tls_accept" pkey = 0x0 #12 0x00007f694cc9ab97 in tls_h_read_f (c=0x7f6927c9f2a8, flags=0x7ffe3a31ece0) at tls_server.c:1173 r = 0x7f6927c9f3d0 bytes_free = 16383 bytes_read = 194 read_size = 16383 ssl_error = 0 ssl_read = 0 ssl = 0x7f6927ca4e58 rd_buf = "\026\003\001\000\275\001\000\000\271\003\003\357$\303\342a\362C\v\220\n\031Fs=E\267m\215\260\031\341\376\027A\213Ѱ)\\\251\036\336\000\000\070\300,\300\060\000\237̨̩̪\300+\300/\000\236\300$\300(\000k\300#\300'\000g\300\n\300\024\000\071\300\t\300\023\000\063\000\235\000\234\000=\000<\000\065\000/\000\377\001\000\000X\000\v\000\004\003\000\001\002\000\n\000\f\000\n\000\035\000\027\000\036\000\031\000\030\000#\000\000\000\026\000\000\000\027\000\000\000\r\000\060\000.\004\003\005\003\006\003\b\a\b\b\b\t\b\n\b\v\b\004\b\005\b\006\004\001\005\001\006\001\003\003\002\003\003\001\002\001\003\002\002\002\004\002\005\002\006\002\232\203\002?\267,\241/\\\331"... wr_buf = "\026\003\003\000\272\004\000\000\266\000\000\034 \000\260\201\227\230o\346/%W\246\306o&\210j\017@\036\352\064\240\---Type <return> to continue, or q <return> to quit--- 346\351(q\233\374\321\332D1|\rI\235\b`\022v^Xk\265\f\270a\243\260\373\311\t<o\v\324\245\205@\344\vz\016\005Vbud\254f\n\326!\306\nm>r]\271e\351\345w\214\200\037\t\265\307\064)\033.\273{1\351\326W,\262\264\267\241\237M\254\276\372\026\227j8\344#Aw\r\025ULM\021\245\222:\004a\006zm?\374\243\224\275\300\310AG\347\305\376\257\303\035I\215\064\035\215\021\300\210o\036A\373\037\231l\242_\324\017\312^\024\r\312\340yq\375?\317 \024\003\003\000\001\001\026\003\003\000"... rd = {buf = 0x7ffe3a30e890 "\026\003\001", pos = 0, used = 194, size = 65536} wr = {buf = 0x7ffe3a2fe890 "\026\003\003", pos = 0, used = 0, size = 65536} tls_c = 0x7f6927c9ed50 enc_rd_buf = 0x0 n = 0 flush_flags = 1 err_src = 0x7f694ccc1878 "TLS read:" ip_buf = "192.168.131.190", '\000' <repeats 48 times> x = 0 tls_dbg = 0 __FUNCTION__ = "tls_h_read_f" #13 0x00000000006b6509 in tcp_read_headers (c=0x7f6927c9f2a8, read_flags=0x7ffe3a31ece0) at core/tcp_read.c:441 bytes = 65535 remaining = 0 p = 0x7f6925192572 ": 100587 <sip:100587@Sipproxy.gs:5062>;tag=588\r\nTo: 100 <sip:100@sipproxy.gs:5061;transport=TLS>;tag=21794\r\nCall-ID: 588-49839(a)192.168.131.190\r\nCSeq: 1 INVITE\r\nServer: Grandstream UCM6301V1.2C 1.0.13."... r = 0x7f6927c9f3d0 mc = 622404320 body_len = 0 mfline = 0x0 mtransid = {s = 0x7f6925191f40 "\030\002", len = 622403416} __FUNCTION__ = "tcp_read_headers" #14 0x00000000006bdd81 in tcp_read_req (con=0x7f6927c9f2a8, bytes_read=0x7ffe3a31ece4, read_flags=0x7ffe3a31ece0) ---Type <return> to continue, or q <return> to quit--- at core/tcp_read.c:1469 bytes = -1 total_bytes = 0 resp = 1 size = 140729874770784 req = 0x7f6927c9f3d0 dst = {send_sock = 0x400000010, to = {s = {sa_family = 0, sa_data = "\300+\002\000\000\000\001\000\061:\006\000\000"}, sin = {sin_family = 0, sin_port = 11200, sin_addr = {s_addr = 2}, sin_zero = "\001\000\061:\006\000\000"}, sin6 = { sin6_family = 0, sin6_port = 11200, sin6_flowinfo = 2, sin6_addr = {__in6_u = { __u6_addr8 = "\001\000\061:\006\000\000\000\000F\265\000\000\000\000", __u6_addr16 = {1, 14897, 6, 0, 17920, 181, 0, 0}, __u6_addr32 = {976289793, 6, 11879936, 0}}}, sin6_scope_id = 8233784}, sas = {ss_family = 0, __ss_padding = "\300+\002\000\000\000\001\000\061:\006\000\000\000\000F\265\000\000\000\000\000\070\243}\000\004\274{ \020\000\000\000\020\000\000\000 \354\061:\371\273{ \002\000\000\000\000\000\000\000\024\000\000\000\000\000\000\000\001\000\000\000\001\000\000\000\a\000\000\000\000\000\000\000\000\000\300+\000\000\000\000\330\354\061:\376\177\000\000\b", '\000' <repeats 22 times>, __ss_align = 140729874770800}}, id = 1, send_flags = {f = 0, blst_imask = 0}, proto = 80 'P', proto_pad0 = -21 '\353', proto_pad1 = 14897} c = 58 ':' ret = 0 __FUNCTION__ = "tcp_read_req" #15 0x00000000006c29e7 in handle_io (fm=0x7f6952f58a58, events=1, idx=-1) at core/tcp_read.c:1780 ret = 8 n = 8 read_flags = RD_CONN_SHORT_READ con = 0x7f6927c9f2a8 s = 7 resp = 1 t = 0 ---Type <return> to continue, or q <return> to quit--- ee = 0x0 __FUNCTION__ = "handle_io" #16 0x00000000006b1729 in io_wait_loop_epoll (h=0xb54600 <io_w>, t=2, repeat=0) at core/io_wait.h:1070 n = 1 r = 0 fm = 0x7f6952f58a58 revents = 1 __FUNCTION__ = "io_wait_loop_epoll" #17 0x00000000006c5519 in tcp_receive_loop (unix_sock=16) at core/tcp_read.c:1976 __FUNCTION__ = "tcp_receive_loop" #18 0x0000000000535888 in tcp_init_children (woneinit=0x7ffe3a31f09c) at core/tcp_main.c:5227 r = 1 i = 5 reader_fd_1 = 16 pid = 0 si_desc = "tcp receiver (generic)\000\000\000\000\000\000\000\000\000\000@\304A\000\000\000\000\000SI\203\000\000\000\000\000\070\243}\000\000\000\000\000\000\000\300+\000\000\000\000\060\360\061:\376\177\000\000\347SW\000\000\000\000\000\060\360\061:\376\177\000\000\n\363e\000\000\000\000\000\340\357\061:\376\177\000\000)\310w\000\000\000\000\000\t\000\000\000\n\000\000\000\000\263\206 i\177\000" si = 0x0 __FUNCTION__ = "tcp_init_children" #19 0x000000000042d562 in main_loop () at main.c:1849 i = 0 pid = 37536 si = 0x0 si_desc = "\v\000\000\000z\000\000\000\004\000\000\000j\001\000\000\000\000\000\000\376\177\000\000\200p\000\000\000\000\000\000p\025\252\002\000\000\000\000 \261\206 i\177\000\000\240\243^Ni\177\000\000\000\000\000\000\000\000\000\000`\366\061:\376\177\00---Type <return> to continue, or q <return> to quit--- 0\000\230Y^Ni\177\000\000SI\203\000\000\000\000\000\070\243}\000\000\000\000\000\250\225^Ni\177\000\000\217U\252Vi\177\000\000\000\362\061:\376\177\000\000\060\000\000\000\060\000\000" nrprocs = 5143176 woneinit = 1 __FUNCTION__ = "main_loop" #20 0x0000000000436b1e in main (argc=7, argv=0x7ffe3a31f748) at main.c:3078 cfg_stream = 0x2a130a0 c = -1 r = 0 tmp = 0x7ffe3a32157d "" tmp_len = 0 port = 0 proto = 0 ahost = 0x0 aport = 0 options = 0x7dd4e0 ":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:x:X:Y:" ret = -1 seed = 2220745850 rfd = 4 debug_save = 0 debug_flag = 0 dont_fork_cnt = 0 n_lst = 0x7ffe3a31f600 p = 0x0 st = {st_dev = 18, st_ino = 104172, st_nlink = 2, st_mode = 16832, st_uid = 0, st_gid = 0, __pad0 = 0, st_rdev = 0, st_size = 40, st_blksize = 4096, st_blocks = 0, st_atim = {tv_sec = 1672026025, tv_nsec = 194902649}, st_mtim = { tv_sec = 1672281302, tv_nsec = 856611068}, st_ctim = {tv_sec = 1672281302, tv_nsec = 856611068}, __unused = {0, 0, 0}} ---Type <return> to continue, or q <return> to quit--- tbuf = "\216\377w\001", '\000' <repeats 12 times>, "\250\061\234Vi\177\000\000\000\360\212Wi\177", '\000' <repeats 90 times>, "\200\"\254\000\000\000\000\000\300\310A\000\000\000\000\000@\367\061:\376\177", '\000' <repeats 26 times>, "\336\310jWi\177\000\000\001", '\000' <repeats 23 times>... option_index = 0 long_options = {{name = 0x7df90f "help", has_arg = 0, flag = 0x0, val = 104}, {name = 0x7da7b4 "version", has_arg = 0, flag = 0x0, val = 118}, {name = 0x7df914 "alias", has_arg = 1, flag = 0x0, val = 1024}, {name = 0x7df91a "subst", has_arg = 1, flag = 0x0, val = 1025}, {name = 0x7df920 "substdef", has_arg = 1, flag = 0x0, val = 1026}, { name = 0x7df929 "substdefs", has_arg = 1, flag = 0x0, val = 1027}, {name = 0x7df933 "server-id", has_arg = 1, flag = 0x0, val = 1028}, {name = 0x7df93d "loadmodule", has_arg = 1, flag = 0x0, val = 1029}, { name = 0x7df948 "modparam", has_arg = 1, flag = 0x0, val = 1030}, {name = 0x7df951 "log-engine", has_arg = 1, flag = 0x0, val = 1031}, {name = 0x7df95c "debug", has_arg = 1, flag = 0x0, val = 1032}, {name = 0x7df962 "cfg-print", has_arg = 0, flag = 0x0, val = 1033}, {name = 0x7df96c "atexit", has_arg = 1, flag = 0x0, val = 1034}, {name = 0x0, has_arg = 0, flag = 0x0, val = 0}} __FUNCTION__ = "main" (gdb) (gdb) info locals cfg_stream = 0x2a130a0 c = -1 r = 0 tmp = 0x7ffe3a32157d "" tmp_len = 0 port = 0 proto = 0 ahost = 0x0 aport = 0 options = 0x7dd4e0 ":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:x:X:Y:" ret = -1 seed = 2220745850 rfd = 4 debug_save = 0 debug_flag = 0 dont_fork_cnt = 0 n_lst = 0x7ffe3a31f600 p = 0x0 st = {st_dev = 18, st_ino = 104172, st_nlink = 2, st_mode = 16832, st_uid = 0, st_gid = 0, __pad0 = 0, st_rdev = 0, st_size = 40, st_blksize = 4096, st_blocks = 0, st_atim = {tv_sec = 1672026025, tv_nsec = 194902649}, st_mtim = {tv_sec = 1672281302, tv_nsec = 856611068}, st_ctim = {tv_sec = 1672281302, tv_nsec = 856611068}, __unused = {0, 0, 0}} tbuf = "\216\377w\001", '\000' <repeats 12 times>, "\250\061\234Vi\177\000\000\000\360\212Wi\177", '\000' <repeats 90 times>, "\200\"\254\000\000\000\000\000\300\310A\000\000\000\000\000@\367\061:\376\177", '\000' <repeats 26 times>, "\336\310jWi\177\000\000\001", '\000' <repeats 23 times>... option_index = 0 long_options = {{name = 0x7df90f "help", has_arg = 0, flag = 0x0, val = 104}, {name = 0x7da7b4 "version", has_arg = 0, flag = 0x0, val = 118}, {name = 0x7df914 "alias", has_arg = 1, flag = 0x0, val = 1024}, {name = 0x7df91a "subst", has_arg = 1, flag = 0x0, ---Type <return> to continue, or q <return> to quit--- val = 1025}, {name = 0x7df920 "substdef", has_arg = 1, flag = 0x0, val = 1026}, {name = 0x7df929 "substdefs", has_arg = 1, flag = 0x0, val = 1027}, {name = 0x7df933 "server-id", has_arg = 1, flag = 0x0, val = 1028}, {name = 0x7df93d "loadmodule", has_arg = 1, flag = 0x0, val = 1029}, {name = 0x7df948 "modparam", has_arg = 1, flag = 0x0, val = 1030}, { name = 0x7df951 "log-engine", has_arg = 1, flag = 0x0, val = 1031}, {name = 0x7df95c "debug", has_arg = 1, flag = 0x0, val = 1032}, {name = 0x7df962 "cfg-print", has_arg = 0, flag = 0x0, val = 1033}, {name = 0x7df96c "atexit", has_arg = 1, flag = 0x0, val = 1034}, {name = 0x0, has_arg = 0, flag = 0x0, val = 0}} __FUNCTION__ = "main" (gdb) list 1978 int main(int argc, char** argv) 1979 { 1980 1981 FILE* cfg_stream; 1982 int c,r; 1983 char *tmp; 1984 int tmp_len; 1985 int port; 1986 int proto; 1987 char *ahost = NULL; ``` #### Log Messages #### SIP Traffic ### Possible Solutions ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.6.2 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled on 10:33:27 Dec 29 2022 with gcc 4.9.4 ``` * **Operating System**:  ``` Linux localhost.localdomain 3.10.0-327.el7.x86_64 #1 SMP Thu Nov 19 22:10:57 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3319 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3319(a)github.com>

2 weeks, 5 days

[kamailio/kamailio] hiops moduls (#2209)

by mojtabaesfandiari

#### Pre-Submission Checklist    - [ ] Commit message has the format required by CONTRIBUTING guide - [ ] Commits are split per component (core, individual modules, libs, utils, ...) - [ ] Each component has a single commit (if not, squash them into one commit) - [ ] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [ ] Small bug fix (non-breaking change which fixes an issue) - [ ] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [ ] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description  You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/2209 -- Commit Summary -- * add received_in_via function(use it in hiops module) * hiops: new module in Kamailio -- File Changes -- M src/core/msg_translator.c (25) M src/core/msg_translator.h (3) A src/modules/hiops/Alarm-Indicator.c (153) A src/modules/hiops/Alarm-Indicator.h (57) A src/modules/hiops/BIT_STRING.c (189) A src/modules/hiops/BIT_STRING.h (33) A src/modules/hiops/CMakeLists.txt (92) A src/modules/hiops/Code.c (64) A src/modules/hiops/Code.h (49) A src/modules/hiops/CommunicationIdentifier.c (94) A src/modules/hiops/CommunicationIdentifier.h (43) A src/modules/hiops/GeneralizedTime.c (706) A src/modules/hiops/GeneralizedTime.h (69) A src/modules/hiops/HI1-Operation.c (94) A src/modules/hiops/HI1-Operation.h (61) A src/modules/hiops/IA5String.c (77) A src/modules/hiops/IA5String.h (27) A src/modules/hiops/INTEGER.c (1025) A src/modules/hiops/INTEGER.h (82) A src/modules/hiops/IP-value.c (130) A src/modules/hiops/IP-value.h (55) A src/modules/hiops/IPAddress.c (393) A src/modules/hiops/IPAddress.h (67) A src/modules/hiops/LawfulInterceptionIdentifier.c (126) A src/modules/hiops/LawfulInterceptionIdentifier.h (38) A src/modules/hiops/LocalTimeStamp.c (191) A src/modules/hiops/LocalTimeStamp.h (50) A src/modules/hiops/Makefile (15) A src/modules/hiops/National-HI1-ASN1parameters.c (139) A src/modules/hiops/National-HI1-ASN1parameters.h (43) A src/modules/hiops/NativeEnumerated.c (207) A src/modules/hiops/NativeEnumerated.h (32) A src/modules/hiops/NativeInteger.c (332) A src/modules/hiops/NativeInteger.h (37) A src/modules/hiops/Network-Element-Identifier.c (198) A src/modules/hiops/Network-Element-Identifier.h (60) A src/modules/hiops/Network-Identifier.c (94) A src/modules/hiops/Network-Identifier.h (48) A src/modules/hiops/Notification.c (153) A src/modules/hiops/Notification.h (57) A src/modules/hiops/OBJECT_IDENTIFIER.c (764) A src/modules/hiops/OBJECT_IDENTIFIER.h (139) A src/modules/hiops/OCTET_STRING.c (1807) A src/modules/hiops/OCTET_STRING.h (86) A src/modules/hiops/PrintableString.c (109) A src/modules/hiops/PrintableString.h (24) A src/modules/hiops/Priority.c (125) A src/modules/hiops/Priority.h (38) A src/modules/hiops/TimeStamp.c (64) A src/modules/hiops/TimeStamp.h (49) A src/modules/hiops/UTCTime.c (179) A src/modules/hiops/UTCTime.h (38) A src/modules/hiops/asn_application.h (47) A src/modules/hiops/asn_codecs.h (109) A src/modules/hiops/asn_codecs_prim.c (312) A src/modules/hiops/asn_codecs_prim.h (53) A src/modules/hiops/asn_internal.h (128) A src/modules/hiops/asn_system.h (137) A src/modules/hiops/ber_decoder.c (283) A src/modules/hiops/ber_decoder.h (64) A src/modules/hiops/ber_tlv_length.c (178) A src/modules/hiops/ber_tlv_length.h (50) A src/modules/hiops/ber_tlv_tag.c (144) A src/modules/hiops/ber_tlv_tag.h (60) A src/modules/hiops/constr_CHOICE.c (1114) A src/modules/hiops/constr_CHOICE.h (57) A src/modules/hiops/constr_SEQUENCE.c (1425) A src/modules/hiops/constr_SEQUENCE.h (60) A src/modules/hiops/constr_TYPE.c (77) A src/modules/hiops/constr_TYPE.h (180) A src/modules/hiops/constraints.c (93) A src/modules/hiops/constraints.h (63) A src/modules/hiops/der_encoder.c (201) A src/modules/hiops/der_encoder.h (68) A src/modules/hiops/hi1ops.c (682) A src/modules/hiops/hi1ops.h (102) A src/modules/hiops/hi2ops.c (1319) A src/modules/hiops/hi2ops.h (109) A src/modules/hiops/hiops.c (272) A src/modules/hiops/hiops.h (38) A src/modules/hiops/per_decoder.c (93) A src/modules/hiops/per_decoder.h (56) A src/modules/hiops/per_encoder.c (151) A src/modules/hiops/per_encoder.h (69) A src/modules/hiops/per_opentype.c (378) A src/modules/hiops/per_opentype.h (22) A src/modules/hiops/per_support.c (483) A src/modules/hiops/per_support.h (135) A src/modules/hiops/tcp_socket.c (136) A src/modules/hiops/tcp_socket.h (39) A src/modules/hiops/xer_decoder.c (368) A src/modules/hiops/xer_decoder.h (106) A src/modules/hiops/xer_encoder.c (67) A src/modules/hiops/xer_encoder.h (59) A src/modules/hiops/xer_support.c (227) A src/modules/hiops/xer_support.h (55) -- Patch Links -- https://github.com/kamailio/kamailio/pull/2209.patch https://github.com/kamailio/kamailio/pull/2209.diff -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/2209

4 weeks

[kamailio/kamailio] Release 5.6.1 Fail to build app_python3 for Fedora Rawhide (Issue #3187)

by Anthony Messina

### Description Version 5.6.1 build of app_python3 in Fedora Copr fails for Rawhide (gcc-12.1 and python-3.11) #### Build Log Messages Full build log: https://download.copr.fedorainfracloud.org/results/amessina/mss/fedora-rawh… ``` make[2]: Entering directory '/builddir/build/BUILD/kamailio-5.6.1/src/modules/app_python3' gcc -fPIC -DPIC -g -funroll-loops -Wcast-align -m64 -minline-all-stringops -falign-loops -ftree-vectorize -fno-strict-overflow -mtune=generic -pthread -DKSR_PTHREAD_MUTEX_SHARED -Wall -DNAME='"kamailio"' -DVERSION='"5.6.1-1.fc37"' -DARCH='"x86_64"' -DOS='linux_' -DOS_QUOTED='"linux"' -DCOMPILER='"gcc 12.1.1"' -D__CPU_x86_64 -D__OS_linux -DVERSIONVAL=5006001 -DCFG_DIR='"/etc/kamailio/"' -DSHARE_DIR='"/usr/share/kamailio/"' -DRUN_DIR='"/run/kamailio/"' -DPKG_MALLOC -DSHM_MMAP -DDNS_IP_HACK -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DUSE_DNS_CACHE -DUSE_DNS_FAILOVER -DUSE_DST_BLOCKLIST -DUSE_NAPTR -DWITH_XAVP -DMEM_JOIN_FREE -DF_MALLOC -DQ_MALLOC -DTLSF_MALLOC -DDBG_SR_MEMORY -DUSE_TLS -DTLS_HOOKS -DUSE_CORE_STATS -DSTATISTICS -DMALLOC_STATS -DUSE_SCTP -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DCC_GCC_LIKE_ASM -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_SCHED_SETSCHEDULER -DHAVE_IP_MREQN -DUSE_RAW_SOCKS -DHAVE_EPOLL -DHAVE_SIGIO_RT -DSIGINFO64_WORKARROUND -DUSE_FUTEX -DHAVE_SELECT -I/usr/include/python3.11 -I/usr/include/python3.11 -DMOD_NAME='"app_python3"' -c apy_kemi.c -o apy_kemi.o -MMD -MP make[2]: Leaving directory '/builddir/build/BUILD/kamailio-5.6.1/src/modules/app_python3' apy_kemi.c: In function 'sr_apy_kemi_exec_func': apy_kemi.c:1835:55: error: 'PyThreadState' {aka 'struct _ts'} has no member named 'frame'; did you mean 'cframe'? 1835 | if (pstate != NULL && pstate->frame != NULL) { | ^~~~~ | cframe apy_kemi.c:1836:50: error: 'PyThreadState' {aka 'struct _ts'} has no member named 'frame'; did you mean 'cframe'? 1836 | pframe = pstate->frame; | ^~~~~ | cframe In file included from apy_kemi.c:28: apy_kemi.c:1844:58: error: invalid use of incomplete typedef 'PyFrameObject' {aka 'struct _frame'} 1844 | (pframe && pframe->f_code)?PyBytes_AsString(pframe->f_code->co_filename):"", | ^~ ../../core/dprint.h:317:80: note: in definition of macro 'LOG_FX' 317 | _ksr_slog_func(&__kld, fmt, ## args); \ | ^~~~ ../../core/dprint.h:351:25: note: in expansion of macro 'LOG_FL' 351 | LOG_FL(facility, level, NULL, prefix, fmt, ## args) | ^~~~~~ ../../core/dprint.h:354:25: note: in expansion of macro 'LOG_FP' 354 | LOG_FP(DEFAULT_FACILITY, (level), LOC_INFO, fmt, ## args) | ^~~~~~ apy_kemi.c:1839:25: note: in expansion of macro 'LOG' 1839 | LOG(cfg_get(core, core_cfg, latency_log), | ^~~ apy_kemi.c:1844:91: error: invalid use of incomplete typedef 'PyFrameObject' {aka 'struct _frame'} 1844 | (pframe && pframe->f_code)?PyBytes_AsString(pframe->f_code->co_filename):"", | ^~ ../../core/dprint.h:317:80: note: in definition of macro 'LOG_FX' 317 | _ksr_slog_func(&__kld, fmt, ## args); \ | ^~~~ ../../core/dprint.h:351:25: note: in expansion of macro 'LOG_FL' 351 | LOG_FL(facility, level, NULL, prefix, fmt, ## args) | ^~~~~~ ../../core/dprint.h:354:25: note: in expansion of macro 'LOG_FP' 354 | LOG_FP(DEFAULT_FACILITY, (level), LOC_INFO, fmt, ## args) | ^~~~~~ apy_kemi.c:1839:25: note: in expansion of macro 'LOG' 1839 | LOG(cfg_get(core, core_cfg, latency_log), | ^~~ apy_kemi.c:1845:58: error: invalid use of incomplete typedef 'PyFrameObject' {aka 'struct _frame'} 1845 | (pframe && pframe->f_code)?PyBytes_AsString(pframe->f_code->co_name):"", | ^~ ../../core/dprint.h:317:80: note: in definition of macro 'LOG_FX' 317 | _ksr_slog_func(&__kld, fmt, ## args); \ | ^~~~ ../../core/dprint.h:351:25: note: in expansion of macro 'LOG_FL' 351 | LOG_FL(facility, level, NULL, prefix, fmt, ## args) | ^~~~~~ ../../core/dprint.h:354:25: note: in expansion of macro 'LOG_FP' 354 | LOG_FP(DEFAULT_FACILITY, (level), LOC_INFO, fmt, ## args) | ^~~~~~ apy_kemi.c:1839:25: note: in expansion of macro 'LOG' 1839 | LOG(cfg_get(core, core_cfg, latency_log), | ^~~ apy_kemi.c:1845:91: error: invalid use of incomplete typedef 'PyFrameObject' {aka 'struct _frame'} 1845 | (pframe && pframe->f_code)?PyBytes_AsString(pframe->f_code->co_name):"", | ^~ ../../core/dprint.h:317:80: note: in definition of macro 'LOG_FX' 317 | _ksr_slog_func(&__kld, fmt, ## args); \ | ^~~~ ../../core/dprint.h:351:25: note: in expansion of macro 'LOG_FL' 351 | LOG_FL(facility, level, NULL, prefix, fmt, ## args) | ^~~~~~ ../../core/dprint.h:354:25: note: in expansion of macro 'LOG_FP' 354 | LOG_FP(DEFAULT_FACILITY, (level), LOC_INFO, fmt, ## args) | ^~~~~~ apy_kemi.c:1839:25: note: in expansion of macro 'LOG' 1839 | LOG(cfg_get(core, core_cfg, latency_log), | ^~~ apy_kemi.c:1846:58: error: invalid use of incomplete typedef 'PyFrameObject' {aka 'struct _frame'} 1846 | (pframe && pframe->f_code)?PyCode_Addr2Line(pframe->f_code, pframe->f_lasti):0); | ^~ ../../core/dprint.h:317:80: note: in definition of macro 'LOG_FX' 317 | _ksr_slog_func(&__kld, fmt, ## args); \ | ^~~~ ../../core/dprint.h:351:25: note: in expansion of macro 'LOG_FL' 351 | LOG_FL(facility, level, NULL, prefix, fmt, ## args) | ^~~~~~ ../../core/dprint.h:354:25: note: in expansion of macro 'LOG_FP' 354 | LOG_FP(DEFAULT_FACILITY, (level), LOC_INFO, fmt, ## args) | ^~~~~~ apy_kemi.c:1839:25: note: in expansion of macro 'LOG' 1839 | LOG(cfg_get(core, core_cfg, latency_log), | ^~~ apy_kemi.c:1846:91: error: invalid use of incomplete typedef 'PyFrameObject' {aka 'struct _frame'} 1846 | (pframe && pframe->f_code)?PyCode_Addr2Line(pframe->f_code, pframe->f_lasti):0); | ^~ ../../core/dprint.h:317:80: note: in definition of macro 'LOG_FX' 317 | _ksr_slog_func(&__kld, fmt, ## args); \ | ^~~~ ../../core/dprint.h:351:25: note: in expansion of macro 'LOG_FL' 351 | LOG_FL(facility, level, NULL, prefix, fmt, ## args) | ^~~~~~ ../../core/dprint.h:354:25: note: in expansion of macro 'LOG_FP' 354 | LOG_FP(DEFAULT_FACILITY, (level), LOC_INFO, fmt, ## args) | ^~~~~~ apy_kemi.c:1839:25: note: in expansion of macro 'LOG' 1839 | LOG(cfg_get(core, core_cfg, latency_log), | ^~~ apy_kemi.c:1846:107: error: invalid use of incomplete typedef 'PyFrameObject' {aka 'struct _frame'} 1846 | (pframe && pframe->f_code)?PyCode_Addr2Line(pframe->f_code, pframe->f_lasti):0); | ^~ ../../core/dprint.h:317:80: note: in definition of macro 'LOG_FX' 317 | _ksr_slog_func(&__kld, fmt, ## args); \ | ^~~~ ../../core/dprint.h:351:25: note: in expansion of macro 'LOG_FL' 351 | LOG_FL(facility, level, NULL, prefix, fmt, ## args) | ^~~~~~ ../../core/dprint.h:354:25: note: in expansion of macro 'LOG_FP' 354 | LOG_FP(DEFAULT_FACILITY, (level), LOC_INFO, fmt, ## args) | ^~~~~~ apy_kemi.c:1839:25: note: in expansion of macro 'LOG' 1839 | LOG(cfg_get(core, core_cfg, latency_log), | ^~~ apy_kemi.c:1844:58: error: invalid use of incomplete typedef 'PyFrameObject' {aka 'struct _frame'} 1844 | (pframe && pframe->f_code)?PyBytes_AsString(pframe->f_code->co_filename):"", | ^~ ../../core/dprint.h:326:99: note: in definition of macro 'LOG_FX' 326 | LOGV_FUNCSUFFIX_STR(funcname), ## args); \ | ^~~~ ../../core/dprint.h:351:25: note: in expansion of macro 'LOG_FL' 351 | LOG_FL(facility, level, NULL, prefix, fmt, ## args) | ^~~~~~ ../../core/dprint.h:354:25: note: in expansion of macro 'LOG_FP' 354 | LOG_FP(DEFAULT_FACILITY, (level), LOC_INFO, fmt, ## args) | ^~~~~~ apy_kemi.c:1839:25: note: in expansion of macro 'LOG' 1839 | LOG(cfg_get(core, core_cfg, latency_log), | ^~~ apy_kemi.c:1844:91: error: invalid use of incomplete typedef 'PyFrameObject' {aka 'struct _frame'} 1844 | (pframe && pframe->f_code)?PyBytes_AsString(pframe->f_code->co_filename):"", | ^~ ../../core/dprint.h:326:99: note: in definition of macro 'LOG_FX' 326 | LOGV_FUNCSUFFIX_STR(funcname), ## args); \ | ^~~~ ../../core/dprint.h:351:25: note: in expansion of macro 'LOG_FL' 351 | LOG_FL(facility, level, NULL, prefix, fmt, ## args) | ^~~~~~ ../../core/dprint.h:354:25: note: in expansion of macro 'LOG_FP' 354 | LOG_FP(DEFAULT_FACILITY, (level), LOC_INFO, fmt, ## args) | ^~~~~~ apy_kemi.c:1839:25: note: in expansion of macro 'LOG' 1839 | LOG(cfg_get(core, core_cfg, latency_log), | ^~~ apy_kemi.c:1845:58: error: invalid use of incomplete typedef 'PyFrameObject' {aka 'struct _frame'} 1845 | (pframe && pframe->f_code)?PyBytes_AsString(pframe->f_code->co_name):"", | ^~ ../../core/dprint.h:326:99: note: in definition of macro 'LOG_FX' 326 | LOGV_FUNCSUFFIX_STR(funcname), ## args); \ | ^~~~ ../../core/dprint.h:351:25: note: in expansion of macro 'LOG_FL' 351 | LOG_FL(facility, level, NULL, prefix, fmt, ## args) | ^~~~~~ ../../core/dprint.h:354:25: note: in expansion of macro 'LOG_FP' 354 | LOG_FP(DEFAULT_FACILITY, (level), LOC_INFO, fmt, ## args) | ^~~~~~ apy_kemi.c:1839:25: note: in expansion of macro 'LOG' 1839 | LOG(cfg_get(core, core_cfg, latency_log), | ^~~ apy_kemi.c:1845:91: error: invalid use of incomplete typedef 'PyFrameObject' {aka 'struct _frame'} 1845 | (pframe && pframe->f_code)?PyBytes_AsString(pframe->f_code->co_name):"", | ^~ ../../core/dprint.h:326:99: note: in definition of macro 'LOG_FX' 326 | LOGV_FUNCSUFFIX_STR(funcname), ## args); \ | ^~~~ ../../core/dprint.h:351:25: note: in expansion of macro 'LOG_FL' 351 | LOG_FL(facility, level, NULL, prefix, fmt, ## args) | ^~~~~~ ../../core/dprint.h:354:25: note: in expansion of macro 'LOG_FP' 354 | LOG_FP(DEFAULT_FACILITY, (level), LOC_INFO, fmt, ## args) | ^~~~~~ apy_kemi.c:1839:25: note: in expansion of macro 'LOG' 1839 | LOG(cfg_get(core, core_cfg, latency_log), | ^~~ apy_kemi.c:1846:58: error: invalid use of incomplete typedef 'PyFrameObject' {aka 'struct _frame'} 1846 | (pframe && pframe->f_code)?PyCode_Addr2Line(pframe->f_code, pframe->f_lasti):0); | ^~ ../../core/dprint.h:326:99: note: in definition of macro 'LOG_FX' 326 | LOGV_FUNCSUFFIX_STR(funcname), ## args); \ | ^~~~ ../../core/dprint.h:351:25: note: in expansion of macro 'LOG_FL' 351 | LOG_FL(facility, level, NULL, prefix, fmt, ## args) | ^~~~~~ ../../core/dprint.h:354:25: note: in expansion of macro 'LOG_FP' 354 | LOG_FP(DEFAULT_FACILITY, (level), LOC_INFO, fmt, ## args) | ^~~~~~ apy_kemi.c:1839:25: note: in expansion of macro 'LOG' 1839 | LOG(cfg_get(core, core_cfg, latency_log), | ^~~ apy_kemi.c:1846:91: error: invalid use of incomplete typedef 'PyFrameObject' {aka 'struct _frame'} 1846 | (pframe && pframe->f_code)?PyCode_Addr2Line(pframe->f_code, pframe->f_lasti):0); | ^~ ../../core/dprint.h:326:99: note: in definition of macro 'LOG_FX' 326 | LOGV_FUNCSUFFIX_STR(funcname), ## args); \ | ^~~~ ../../core/dprint.h:351:25: note: in expansion of macro 'LOG_FL' 351 | LOG_FL(facility, level, NULL, prefix, fmt, ## args) | ^~~~~~ ../../core/dprint.h:354:25: note: in expansion of macro 'LOG_FP' 354 | LOG_FP(DEFAULT_FACILITY, (level), LOC_INFO, fmt, ## args) | ^~~~~~ apy_kemi.c:1839:25: note: in expansion of macro 'LOG' 1839 | LOG(cfg_get(core, core_cfg, latency_log), | ^~~ apy_kemi.c:1846:107: error: invalid use of incomplete typedef 'PyFrameObject' {aka 'struct _frame'} 1846 | (pframe && pframe->f_code)?PyCode_Addr2Line(pframe->f_code, pframe->f_lasti):0); | ^~ ../../core/dprint.h:326:99: note: in definition of macro 'LOG_FX' 326 | LOGV_FUNCSUFFIX_STR(funcname), ## args); \ | ^~~~ ../../core/dprint.h:351:25: note: in expansion of macro 'LOG_FL' 351 | LOG_FL(facility, level, NULL, prefix, fmt, ## args) | ^~~~~~ ../../core/dprint.h:354:25: note: in expansion of macro 'LOG_FP' 354 | LOG_FP(DEFAULT_FACILITY, (level), LOC_INFO, fmt, ## args) | ^~~~~~ apy_kemi.c:1839:25: note: in expansion of macro 'LOG' 1839 | LOG(cfg_get(core, core_cfg, latency_log), | ^~~ apy_kemi.c:1844:58: error: invalid use of incomplete typedef 'PyFrameObject' {aka 'struct _frame'} 1844 | (pframe && pframe->f_code)?PyBytes_AsString(pframe->f_code->co_filename):"", | ^~ ../../core/dprint.h:337:99: note: in definition of macro 'LOG_FX' 337 | LOGV_FUNCSUFFIX_STR(funcname), ## args); \ | ^~~~ ../../core/dprint.h:351:25: note: in expansion of macro 'LOG_FL' 351 | LOG_FL(facility, level, NULL, prefix, fmt, ## args) | ^~~~~~ ../../core/dprint.h:354:25: note: in expansion of macro 'LOG_FP' 354 | LOG_FP(DEFAULT_FACILITY, (level), LOC_INFO, fmt, ## args) | ^~~~~~ apy_kemi.c:1839:25: note: in expansion of macro 'LOG' 1839 | LOG(cfg_get(core, core_cfg, latency_log), | ^~~ apy_kemi.c:1844:91: error: invalid use of incomplete typedef 'PyFrameObject' {aka 'struct _frame'} 1844 | (pframe && pframe->f_code)?PyBytes_AsString(pframe->f_code->co_filename):"", | ^~ ../../core/dprint.h:337:99: note: in definition of macro 'LOG_FX' 337 | LOGV_FUNCSUFFIX_STR(funcname), ## args); \ | ^~~~ ../../core/dprint.h:351:25: note: in expansion of macro 'LOG_FL' 351 | LOG_FL(facility, level, NULL, prefix, fmt, ## args) | ^~~~~~ ../../core/dprint.h:354:25: note: in expansion of macro 'LOG_FP' 354 | LOG_FP(DEFAULT_FACILITY, (level), LOC_INFO, fmt, ## args) | ^~~~~~ apy_kemi.c:1839:25: note: in expansion of macro 'LOG' 1839 | LOG(cfg_get(core, core_cfg, latency_log), | ^~~ apy_kemi.c:1845:58: error: invalid use of incomplete typedef 'PyFrameObject' {aka 'struct _frame'} 1845 | (pframe && pframe->f_code)?PyBytes_AsString(pframe->f_code->co_name):"", | ^~ ../../core/dprint.h:337:99: note: in definition of macro 'LOG_FX' 337 | LOGV_FUNCSUFFIX_STR(funcname), ## args); \ | ^~~~ ../../core/dprint.h:351:25: note: in expansion of macro 'LOG_FL' 351 | LOG_FL(facility, level, NULL, prefix, fmt, ## args) | ^~~~~~ ../../core/dprint.h:354:25: note: in expansion of macro 'LOG_FP' 354 | LOG_FP(DEFAULT_FACILITY, (level), LOC_INFO, fmt, ## args) | ^~~~~~ apy_kemi.c:1839:25: note: in expansion of macro 'LOG' 1839 | LOG(cfg_get(core, core_cfg, latency_log), | ^~~ apy_kemi.c:1845:91: error: invalid use of incomplete typedef 'PyFrameObject' {aka 'struct _frame'} 1845 | (pframe && pframe->f_code)?PyBytes_AsString(pframe->f_code->co_name):"", | ^~ ../../core/dprint.h:337:99: note: in definition of macro 'LOG_FX' 337 | LOGV_FUNCSUFFIX_STR(funcname), ## args); \ | ^~~~ ../../core/dprint.h:351:25: note: in expansion of macro 'LOG_FL' 351 | LOG_FL(facility, level, NULL, prefix, fmt, ## args) | ^~~~~~ ../../core/dprint.h:354:25: note: in expansion of macro 'LOG_FP' 354 | LOG_FP(DEFAULT_FACILITY, (level), LOC_INFO, fmt, ## args) | ^~~~~~ apy_kemi.c:1839:25: note: in expansion of macro 'LOG' 1839 | LOG(cfg_get(core, core_cfg, latency_log), | ^~~ apy_kemi.c:1846:58: error: invalid use of incomplete typedef 'PyFrameObject' {aka 'struct _frame'} 1846 | (pframe && pframe->f_code)?PyCode_Addr2Line(pframe->f_code, pframe->f_lasti):0); | ^~ ../../core/dprint.h:337:99: note: in definition of macro 'LOG_FX' 337 | LOGV_FUNCSUFFIX_STR(funcname), ## args); \ | ^~~~ ../../core/dprint.h:351:25: note: in expansion of macro 'LOG_FL' 351 | LOG_FL(facility, level, NULL, prefix, fmt, ## args) | ^~~~~~ ../../core/dprint.h:354:25: note: in expansion of macro 'LOG_FP' 354 | LOG_FP(DEFAULT_FACILITY, (level), LOC_INFO, fmt, ## args) | ^~~~~~ apy_kemi.c:1839:25: note: in expansion of macro 'LOG' 1839 | LOG(cfg_get(core, core_cfg, latency_log), | ^~~ apy_kemi.c:1846:91: error: invalid use of incomplete typedef 'PyFrameObject' {aka 'struct _frame'} 1846 | (pframe && pframe->f_code)?PyCode_Addr2Line(pframe->f_code, pframe->f_lasti):0); | ^~ ../../core/dprint.h:337:99: note: in definition of macro 'LOG_FX' 337 | LOGV_FUNCSUFFIX_STR(funcname), ## args); \ | ^~~~ ../../core/dprint.h:351:25: note: in expansion of macro 'LOG_FL' 351 | LOG_FL(facility, level, NULL, prefix, fmt, ## args) | ^~~~~~ ../../core/dprint.h:354:25: note: in expansion of macro 'LOG_FP' 354 | LOG_FP(DEFAULT_FACILITY, (level), LOC_INFO, fmt, ## args) | ^~~~~~ apy_kemi.c:1839:25: note: in expansion of macro 'LOG' 1839 | LOG(cfg_get(core, core_cfg, latency_log), | ^~~ apy_kemi.c:1846:107: error: invalid use of incomplete typedef 'PyFrameObject' {aka 'struct _frame'} 1846 | (pframe && pframe->f_code)?PyCode_Addr2Line(pframe->f_code, pframe->f_lasti):0); | ^~ ../../core/dprint.h:337:99: note: in definition of macro 'LOG_FX' 337 | LOGV_FUNCSUFFIX_STR(funcname), ## args); \ | ^~~~ ../../core/dprint.h:351:25: note: in expansion of macro 'LOG_FL' 351 | LOG_FL(facility, level, NULL, prefix, fmt, ## args) | ^~~~~~ ../../core/dprint.h:354:25: note: in expansion of macro 'LOG_FP' 354 | LOG_FP(DEFAULT_FACILITY, (level), LOC_INFO, fmt, ## args) | ^~~~~~ apy_kemi.c:1839:25: note: in expansion of macro 'LOG' 1839 | LOG(cfg_get(core, core_cfg, latency_log), | ^~~ make[2]: *** [../../Makefile.rules:100: apy_kemi.o] Error 1 ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3187 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3187(a)github.com>

1 month, 3 weeks

[kamailio/kamailio] web-socket connection lost and cannot be terminated (Issue #3278)

by sergey-safarov

### Description On server used WebRTC clients. Some time Kamailio start flooding messages like this ``` INFO: websocket [ws_frame.c:814]: ws_keepalive(): tcp connection has been lost ``` I have enabled debug logs and can see more detailed output. ``` INFO: websocket [ws_frame.c:814]: ws_keepalive(): tcp connection has been lost DEBUG: websocket [ws_conn.c:485]: wsconn_put_id(): wsconn put id [49] DEBUG: websocket [ws_conn.c:490]: wsconn_put_id(): wsc [0xffff7b4af448] refcnt [2] DEBUG: websocket [ws_conn.c:425]: wsconn_put_mode(): wsconn_put start for [0xffff7b4af448] refcnt [2] DEBUG: websocket [ws_conn.c:439]: wsconn_put_mode(): wsconn_put end for [0xffff7b4af448] refcnt [1] DEBUG: websocket [ws_conn.c:461]: wsconn_get(): wsconn_get for id [0] DEBUG: websocket [ws_conn.c:461]: wsconn_get(): wsconn_get for id [0] DEBUG: websocket [ws_conn.c:461]: wsconn_get(): wsconn_get for id [52] DEBUG: websocket [ws_conn.c:467]: wsconn_get(): wsconn_get returns wsc [0xffff7b4df8f8] refcnt [2] INFO: websocket [ws_frame.c:814]: ws_keepalive(): tcp connection has been lost DEBUG: websocket [ws_conn.c:485]: wsconn_put_id(): wsconn put id [52] DEBUG: websocket [ws_conn.c:490]: wsconn_put_id(): wsc [0xffff7b4df8f8] refcnt [2] DEBUG: websocket [ws_conn.c:425]: wsconn_put_mode(): wsconn_put start for [0xffff7b4df8f8] refcnt [2] DEBUG: websocket [ws_conn.c:439]: wsconn_put_mode(): wsconn_put end for [0xffff7b4df8f8] refcnt [1] DEBUG: websocket [ws_conn.c:461]: wsconn_get(): wsconn_get for id [0] DEBUG: websocket [ws_conn.c:461]: wsconn_get(): wsconn_get for id [0] DEBUG: websocket [ws_conn.c:461]: wsconn_get(): wsconn_get for id [0] DEBUG: websocket [ws_conn.c:461]: wsconn_get(): wsconn_get for id [0] DEBUG: websocket [ws_conn.c:461]: wsconn_get(): wsconn_get for id [61] DEBUG: websocket [ws_conn.c:467]: wsconn_get(): wsconn_get returns wsc [0xffff7b57bfa0] refcnt [2] INFO: websocket [ws_frame.c:814]: ws_keepalive(): tcp connection has been lost DEBUG: websocket [ws_conn.c:485]: wsconn_put_id(): wsconn put id [61] DEBUG: websocket [ws_conn.c:490]: wsconn_put_id(): wsc [0xffff7b57bfa0] refcnt [2] DEBUG: websocket [ws_conn.c:425]: wsconn_put_mode(): wsconn_put start for [0xffff7b57bfa0] refcnt [2] DEBUG: websocket [ws_conn.c:439]: wsconn_put_mode(): wsconn_put end for [0xffff7b57bfa0] refcnt [1] DEBUG: websocket [ws_conn.c:461]: wsconn_get(): wsconn_get for id [0] DEBUG: websocket [ws_conn.c:461]: wsconn_get(): wsconn_get for id [0] DEBUG: websocket [ws_conn.c:461]: wsconn_get(): wsconn_get for id [0] DEBUG: websocket [ws_conn.c:461]: wsconn_get(): wsconn_get for id [70] DEBUG: websocket [ws_conn.c:467]: wsconn_get(): wsconn_get returns wsc [0xffff7b5cc770] refcnt [2] INFO: websocket [ws_frame.c:814]: ws_keepalive(): tcp connection has been lost DEBUG: websocket [ws_conn.c:485]: wsconn_put_id(): wsconn put id [70] DEBUG: websocket [ws_conn.c:490]: wsconn_put_id(): wsc [0xffff7b5cc770] refcnt [2] DEBUG: websocket [ws_conn.c:425]: wsconn_put_mode(): wsconn_put start for [0xffff7b5cc770] refcnt [2] DEBUG: websocket [ws_conn.c:439]: wsconn_put_mode(): wsconn_put end for [0xffff7b5cc770] refcnt [1] DEBUG: websocket [ws_conn.c:461]: wsconn_get(): wsconn_get for id [0] DEBUG: websocket [ws_conn.c:461]: wsconn_get(): wsconn_get for id [0] DEBUG: websocket [ws_conn.c:461]: wsconn_get(): wsconn_get for id [76] DEBUG: websocket [ws_conn.c:467]: wsconn_get(): wsconn_get returns wsc [0xffff7b62d0d0] refcnt [2] INFO: websocket [ws_frame.c:814]: ws_keepalive(): tcp connection has been lost ``` On the server installed commit 1d03d9e8312e6e9b494f6d243fe9b2b4ea890eaf ### Troubleshooting I do not know. For me it looks random. #### Reproduction I do not know. For me it looks random. #### Debugging Data not applicable #### Log Messages provided above #### SIP Traffic not applicable ### Possible Solutions not known ### Additional Information * **Kamailio Version** Used commit 1d03d9e8312e6e9b494f6d243fe9b2b4ea890eaf * **Operating System**: ``` [root@sbc-stage-a0 kamailio]# cat /etc/os-release NAME="CentOS Stream" VERSION="8" ID="centos" ID_LIKE="rhel fedora" VERSION_ID="8" PLATFORM_ID="platform:el8" PRETTY_NAME="CentOS Stream 8" ANSI_COLOR="0;31" CPE_NAME="cpe:/o:centos:centos:8" HOME_URL="https://centos.org/" BUG_REPORT_URL="https://bugzilla.redhat.com/" REDHAT_SUPPORT_PRODUCT="Red Hat Enterprise Linux 8" REDHAT_SUPPORT_PRODUCT_VERSION="CentOS Stream" ``` kernel ``` Linux sbc-stage-a0.nga911.com 4.18.0-365.el8.aarch64 #1 SMP Thu Feb 10 16:12:32 UTC 2022 aarch64 aarch64 aarch64 GNU/Linux ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3278 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3278(a)github.com>

2 months

[kamailio/kamailio] "kamdbctl create" creates the same user twice which fails (Issue #3280)

by Tommy Falgout

### Description When running kamdbctl for the first time with `DBENGINE=MYSQL` , it will try to create the same user twice which causes a failure. Because the user is already there, the create fails and the install script fails As a new user this is very confusing as it leads you to believe that you're blocked. However, if you enable prompt and run it twice and then skip adding access the second time, you can continue. ``` root@924dfe238957:/# /usr/sbin/kamdbctl create Create the database 'kamailio'? (y/n): y -e \E[37;33mINFO: creating database kamailio ... Create database users with access privileges? (y/n): y -e \E[37;33mINFO: granting privileges to database kamailio ... ERROR 1396 (HY000) at line 1: Operation CREATE USER failed for 'kamailio'@'mariadb' ERROR 1396 (HY000) at line 1: Operation CREATE USER failed for 'kamailioro'@'mariadb' ``` ### Troubleshooting If you modify `./usr/lib/x86_64-linux-gnu/kamailio/kamctl/kamdbctl.mysql` to echo the command instead, then you get the following debugging info. ``` root@924dfe238957:/# /usr/sbin/kamdbctl create Create the database 'kamailio'? (y/n): y -e \E[37;33mINFO: creating database kamailio ... mysql -h mariadb -P 3306 -uroot -ppasswd -e CREATE DATABASE kamailio CHARACTER SET latin1; Create database users with access privileges? (y/n): y -e \E[37;33mINFO: granting privileges to database kamailio ... mysql -h mariadb -P 3306 -uroot -ppasswd -e CREATE USER 'kamailio'@'mariadb' IDENTIFIED BY 'kamailiorw'; GRANT ALL PRIVILEGES ON kamailio.* TO 'kamailio'@'mariadb'; mysql -h mariadb -P 3306 -uroot -ppasswd -e CREATE USER 'kamailioro'@'mariadb' IDENTIFIED BY 'kamailioro'; GRANT SELECT ON kamailio.* TO 'kamailioro'@'mariadb'; mysql -h mariadb -P 3306 -uroot -ppasswd -e CREATE USER 'kamailio'@'localhost' IDENTIFIED BY 'kamailiorw'; GRANT ALL PRIVILEGES ON kamailio.* TO 'kamailio'@'localhost'; mysql -h mariadb -P 3306 -uroot -ppasswd -e CREATE USER 'kamailioro'@'localhost' IDENTIFIED BY 'kamailioro'; GRANT SELECT ON kamailio.* TO 'kamailioro'@'localhost'; mysql -h mariadb -P 3306 -uroot -ppasswd -e CREATE USER 'kamailio'@'mariadb' IDENTIFIED BY 'kamailiorw'; GRANT ALL PRIVILEGES ON kamailio.* TO 'kamailio'@'mariadb'; mysql -h mariadb -P 3306 -uroot -ppasswd -e CREATE USER 'kamailioro'@'mariadb' IDENTIFIED BY 'kamailioro'; GRANT SELECT ON kamailio.* TO 'kamailioro'@'mariadb'; ``` As you can see ` 'kamailioro'@'mariadb'` and ` 'kamailioro'@'mariadb'` are added twice which creates a 1396 error. #### Reproduction ``` ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3280 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3280(a)github.com>

2 months

[kamailio/kamailio] tlsa + OpenSSL 3.0.5: multiple unpredictable shm corruption (Issue #3222)

by space88man

### Description * kamailio 5.6.1 on AlmaLinux 9 and OpenSSL 3.0.5 * Used tlsa to separate the OS version of OpenSSL (which is 3.0.1). The same issue happens with the OS version of OpenSSL * Generating TLS client traffic * The issue will occur at about 25 conn/sec * Multiple unpredicatable types of shm corruption ### Troubleshooting * No issue with tlsa + OpenSSL 1.1.1q; the module can sustain 50 conn/sec up to 500 persistent connections. #### Reproduction 1. Used kamailio configuration from the outbound module documentation; i.e., configure kamailio as a TLS edge proxy. To isolate the registrar is another kamailio system 1. Use a SIP load tester to generate REGISTER traffic(Expires: 600) ; at the end of the REGISTER, keep the connection alive and reREGISTER at 300 secs. 1. Generate traffic at > 25 conn/sec (with < 25 conn/sec the test usually succeeds) #### Debugging Data BT in comments below #### Log Messages #### SIP Traffic ### Possible Solutions ### Additional Information 5.6.1 * **Operating System**: AlmaLinux 9, with (OS) OpenSSL 3.0.1. I used tlsa + OpenSSL 3.0.5 -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3222 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3222(a)github.com>

2 months

[kamailio/kamailio] dialog: Add dlg_get_matches function (PR #3005)

by rhys-hanrahan

2 months

[kamailio/kamailio] KEMI API the function ksr_onsend_route does not work in python (Issue #3274)

by Muhammad Shahzad Shafi

### Description using KEMI API in Python v2.7.18 for Kamailio v5.6.2, I encounter error in `ksr_onsend_route`, it always gives following error, ``` ERROR: app_python [python_support.c:154]: python_handle_exception(): apy_exec: ksr_onsend_route((null)): Unhandled exception in the Python code: TypeError: an integer is required ```  ### Troubleshooting Above error happens even if there is no code in this function and it returns success, e.g. ``` python ... def ksr_onsend_route(self, msg): return 1 ... ``` #### Reproduction It happens always whenever `ksr_onsend_route` function exists in `kamailio` class in KEMI python configuration for kamailio.  #### Debugging Data Nothing relevant in debug even with `debug=9` set.  #### Log Messages  ``` ERROR: app_python [python_support.c:154]: python_handle_exception(): apy_exec: ksr_onsend_route((null)): Unhandled exception in the Python code: TypeError: an integer is required ``` #### SIP Traffic  ``` REGISTER sip:voip-test.sip-domain.de:5060 SIP/2.0. Via: SIP/2.0/UDP x.x.x.x:5060;branch=z9hG4bK-1523596-64-0. From: <sip:490000063@voip-test.sip-domain.de:5060>;tag=64. To: <sip:490000063@voip-test.sip-domain.de:5060>. Call-ID: call_id_64. CSeq: 1 REGISTER. Contact: sip:490000063@x.x.x.x:5060. Max-Forwards: 70. Content-Length: 0. .. ``` ### Possible Solutions I suspect the problem is at low level (native code) of app_python module.  ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.6.2 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: compiled with gcc 10.2.1 ``` ``` Python 2.7.18 ``` * **Operating System**:  ``` Linux test-sip-server 5.10.0-17-amd64 #1 SMP Debian 5.10.136-1 (2022-08-13) x86_64 GNU/Linux ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3274 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3274(a)github.com>

2 months, 1 week

[kamailio/kamailio] Ticket to monitor the progress of tls_wolfssl (Issue #3160)

by space88man

### Description This is an umbrella ticket to address issues with the WIP `tls_wolfssl` module ### Expected behavior The module behaves robustly under load testing and various configurations and thus can be accepted long-term in kamailio -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3160 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3160(a)github.com>

2 months, 1 week

Jump to page:

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev December 2022