Hi, I have configured kamailio as Ims server with pcscf,icscf,scsf and hss in 4 different vms . After that I use zoiper client for testing the call flow . Registration is successful .It goes via UE -> Pcscf -> icscf -> scscf and returns back with 200 OK . Registration is happening with authentication from hss .
When I make an INVITE , it goes from UE -> PCSCF -> SCSCF -> ICSCF -> SCSF and s-cscf gives *403 - Domain not served *to icscf and i-cscf returns to p-cscf with the same error .
I am not seeing any errors in scscf and i-cscf .
In pcscf , I am seeing an error like
*Error : <core> [core/lvalue.c] :lval_pvar_assign() : setting pvar failed *
*Error : <core> [core/lvalue.c] :* *lval_assign():assignment failed at pos*
What should I do? Kindly advise.
I am struggling with this issue for a week.kindly do the needful.
Version - kamailio - 5.3.3
I need a normal call flow to be established between two clients.kindly help .
Hello,
this is about config file issues, so the appropriate mailing list is sr-users@lists.kamailio.org
The second error message about lvar_assign() is incomplete, check the logs and there you will see the position when an assignent fails in your config. You can eventually run with debug=3 in kamailio.cfg, reproduce and you will see a lot more debug messages that should help to identify what is wrong.
Cheers, Daniel
On 07.04.20 21:20, Pavithra M wrote:
Hi, I have configured kamailio as Ims server with pcscf,icscf,scsf and hss in 4 different vms . After that I use zoiper client for testing the call flow . Registration is successful .It goes via UE -> Pcscf -> icscf -> scscf and returns back with 200 OK . Registration is happening with authentication from hss .
When I make an INVITE , it goes from UE -> PCSCF -> SCSCF -> ICSCF -> SCSF and s-cscf gives *403 - Domain not served *to icscf and i-cscf returns to p-cscf with the same error .
I am not seeing any errors in scscf and i-cscf .
In pcscf , I am seeing an error like
*Error : <core> [core/lvalue.c] :lval_pvar_assign() : setting pvar failed * *Error : <core> [core/lvalue.c] :
*lval_assign():assignment failed at pos*
What should I do? Kindly advise.
I am struggling with this issue for a week.kindly do the needful.
Version - kamailio - 5.3.3
I need a normal call flow to be established between two clients.kindly help .
Kamailio (SER) - Development Mailing List sr-dev@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-dev
-
Daniel-Constantin Mierla -
Pavithra M