30 May
2009
30 May
'09
10:18 a.m.
when i run
/usr/sbin/sip-router -c -d -f /etc/sip-router/sip-router.cfg
i still get lots of debug messages.
how to start sip-router so that it only prints warning and errors?
-- juha
30 May
30 May
10:59 a.m.
Hello,
On 05/30/2009 10:18 AM, Juha Heinanen wrote:
when i run
/usr/sbin/sip-router -c -d -f /etc/sip-router/sip-router.cfg
i still get lots of debug messages.
how to start sip-router so that it only prints warning and errors?
if you concern about the memory logs, then set memlog and memdbg higher
than debug, see example:
http://sip-router.org/wiki/migration/kamailio-3.0-config#kamailio_config_fi…
Cheers,
Daniel
--
Daniel-Constantin Mierla
http://www.asipto.com/
11:05 a.m.
Daniel-Constantin Mierla writes:
if you concern about the memory logs, then set memlog
and memdbg higher
than debug, see example:
http://sip-router.org/wiki/migration/kamailio-3.0-config#kamailio_config_fi…
no, i'm concerned about messages like this:
0(11114) DEBUG: <core> [sr_module.c:508]: find_export_record: found
<record_route> in module rr [/usr/lib/sip-router/modules_k/rr.so]
0(11114) DEBUG: <core> [route_struct.c:150]: ACTION_#6 #0/1: 3(3)/ 0x5
0(11114) DEBUG: <core> [route_struct.c:150]: ACTION_#25 #0/2: 9(9)/ (nil)
0(11114) DEBUG: <core> [route_struct.c:150]: ACTION_#25 #1/2: 3(3)/ (nil)
0(11114) DEBUG: <core> [sr_module.c:505]: find_export_record: found
<t_newtran> in module tm [/usr/lib/sip-router/modules/tm.so]
-- juha
11:12 a.m.
Hello,
On 05/30/2009 11:05 AM, Juha Heinanen wrote:
Daniel-Constantin Mierla writes:
debug=1
in SR, log levels are:
#define L_ALERT -5
#define L_BUG -4
#define L_CRIT2 -3 /* like L_CRIT, but adds prefix */
#define L_CRIT -2 /* no prefix added */
#define L_ERR -1
#define L_WARN 0
#define L_NOTICE 1
#define L_INFO 2
#define L_DBG 3
Cheers,
Daniel
if you concern about the memory logs, then set
memlog and memdbg higher
than debug, see example:
http://sip-router.org/wiki/migration/kamailio-3.0-config#kamailio_config_fi…
no, i'm concerned about messages like this:
0(11114) DEBUG: <core> [sr_module.c:508]: find_export_record: found
<record_route> in module rr [/usr/lib/sip-router/modules_k/rr.so]
0(11114) DEBUG: <core> [route_struct.c:150]: ACTION_#6 #0/1: 3(3)/ 0x5
0(11114) DEBUG: <core> [route_struct.c:150]: ACTION_#25 #0/2: 9(9)/ (nil)
0(11114) DEBUG: <core> [route_struct.c:150]: ACTION_#25 #1/2: 3(3)/ (nil)
0(11114) DEBUG: <core> [sr_module.c:505]: find_export_record: found
<t_newtran> in module tm [/usr/lib/sip-router/modules/tm.so]
-- juha
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Daniel-Constantin Mierla
http://www.asipto.com/
11:20 a.m.
Daniel-Constantin Mierla writes:
in SR, log levels are:
#define L_ALERT -5
#define L_BUG -4
#define L_CRIT2 -3 /* like L_CRIT, but adds prefix */
#define L_CRIT -2 /* no prefix added */
#define L_ERR -1
#define L_WARN 0
#define L_NOTICE 1
#define L_INFO 2
#define L_DBG 3
thanks, i somehow missed the info on the tips page.
--juha
1 Jun
1 Jun
1:18 p.m.
On May 30, 2009 at 10:18, Juha Heinanen <jh(a)tutpro.com> wrote:
when i run
/usr/sbin/sip-router -c -d -f /etc/sip-router/sip-router.cfg
i still get lots of debug messages.
how to start sip-router so that it only prints warning and errors?
Probably you have a high debug level in sip-router.cfg.
In this case the debug value in sip-router.cfg will override the command
line value for the duration of the cfg. parsing. After the config
parsing it will be restored to the command line value (if any).
Andrei
5683
days inactive
5685
days old
5 comments
3 participants
participants (3)
-
Andrei Pelinescu-Onciul -
Daniel-Constantin Mierla -
jh＠tutpro.com