18 Aug
2011
18 Aug
'11
8:47 p.m.
Module: sip-router
Branch: master
Commit: bd8b01b9e236f9b3dbf20a4c3a153057dc8daa52
URL:
http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=bd8b01b…
Author: Juha Heinanen <jh(a)tutpro.com>
Committer: Juha Heinanen <jh(a)tutpro.com>
Date: Thu Aug 18 20:04:32 2011 +0300
modules/mtree: added new mode to mt_match()
- Added mode=2 to mt_match() call that instead of setting value of
longest matching prefix to a pv, sets values of all matching prefixes to
an avp so that value of longest matching prefix is in avp index 0.
---
modules/mtree/README | 67 ++++++++++++++++++++++++++++---------
modules/mtree/doc/mtree.xml | 14 ++++++++
modules/mtree/doc/mtree_admin.xml | 25 ++++++++++++--
modules/mtree/mtree.c | 53 ++++++++++++++++++++++++++++-
modules/mtree/mtree_mod.c | 17 +++++++++-
5 files changed, 154 insertions(+), 22 deletions(-)
Diff:
http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commitdiff;h=bd8…
19 Aug
19 Aug
12:14 a.m.
Hi!
Eagerly I was interested in the mtree module (never used it before) and
read the README few times but I'm still not sure if I understand it
correctly. IMO the documentation is poor - maybe someone who uses and
understand the module can improve the README. I.e. an example might be
quite useful.
"This module loads data indexed by prefixes from database and returns
associated string or precompiled value."
What is a precompiled value?
Also it find it strange that "mode" is either 2 or not 2. So, mode=1 is
the same as mode=5? Usually it is something like mode=1: ...., mode=2: .....
Thanks
Klaus
On 18.08.2011 19:47, Juha Heinanen wrote:
Module: sip-router
Branch: master
Commit: bd8b01b9e236f9b3dbf20a4c3a153057dc8daa52
URL:
http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=bd8b01b…
Author: Juha Heinanen<jh(a)tutpro.com>
Committer: Juha Heinanen<jh(a)tutpro.com>
Date: Thu Aug 18 20:04:32 2011 +0300
modules/mtree: added new mode to mt_match()
- Added mode=2 to mt_match() call that instead of setting value of
longest matching prefix to a pv, sets values of all matching prefixes to
an avp so that value of longest matching prefix is in avp index 0.
---
modules/mtree/README | 67 ++++++++++++++++++++++++++++---------
modules/mtree/doc/mtree.xml | 14 ++++++++
modules/mtree/doc/mtree_admin.xml | 25 ++++++++++++--
modules/mtree/mtree.c | 53 ++++++++++++++++++++++++++++-
modules/mtree/mtree_mod.c | 17 +++++++++-
5 files changed, 154 insertions(+), 22 deletions(-)
Diff:
http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commitdiff;h=bd8…
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
7:23 a.m.
Klaus Darilion writes:
Eagerly I was interested in the mtree module (never used it before) and
read the README few times but I'm still not sure if I understand it
correctly. IMO the documentation is poor - maybe someone who uses and
understand the module can improve the README. I.e. an example might be
quite useful.
klaus,
i had the same problem with readme and asked questions about it.
"This module loads data indexed by prefixes from
database and returns
associated string or precompiled value."
What is a precompiled value?
may be it refers to integer value of type 1 mtrees, which are not
documented in readme, but which daniel referred to.
Also it find it strange that "mode" is
either 2 or not 2. So, mode=1 is
the same as mode=5? Usually it is something like mode=1: ...., mode=2:
.....
it seemed to me that modes 0 and 1 (corresponding to types 0 and 1 of
mtrees) were already "reserved" in the code, although not used.
therefore i chose mode 2 for the case where values of all matching
prefixes are added to an an avp.
i still need to add mtrees table schema. i don't know if mtree schema
is also needed.
-- juha
9:43 a.m.
On 19.08.2011 06:23, Juha Heinanen wrote:
Klaus Darilion writes:
In mode 2, how are the values added? Will every matching entry be added
as an AVP so that there is an AVP-Array, or will there be just one AVP,
with all the values joined together?
Klaus
Eagerly I was interested in the mtree module (never used it before) and
read the README few times but I'm still not sure if I understand it
correctly. IMO the documentation is poor - maybe someone who uses and
understand the module can improve the README. I.e. an example might be
quite useful.
klaus,
i had the same problem with readme and asked questions about it.
"This module loads data indexed by prefixes
from database and returns
associated string or precompiled value."
What is a precompiled value?
may be it refers to integer value of type 1 mtrees, which are not
documented in readme, but which daniel referred to.
Also it find it strange that "mode" is
either 2 or not 2. So, mode=1 is
the same as mode=5? Usually it is something like mode=1: ...., mode=2:
.....
it seemed to me that modes 0 and 1 (corresponding to types 0 and 1 of
mtrees) were already "reserved" in the code, although not used.
therefore i chose mode 2 for the case where values of all matching
prefixes are added to an an avp.
9:38 p.m.
Klaus Darilion writes:
In mode 2, how are the values added? Will every
matching entry be added
as an AVP so that there is an AVP-Array, or will there be just one AVP,
with all the values joined together?
i tried to tell that in README:
If 'mtree' consists of string values (mtree type = 0) and value of
'mode'
is 2, sets values of all matching prefixes to avp specified by
pv_values parameter so that value of longest matching prefix is in avp
index 0.
i.e., the avp is an array.
-- juha
4874
days inactive
4875
days old
4 comments
2 participants
participants (2)
-
Juha Heinanen -
Klaus Darilion