16 May
2014
16 May
'14
10:28 p.m.
*Hello,*
*Please accept my apologies for asking a simple question - Is there
any example which shows how can I create the dialog profile **value
based on the SIP domain or SIP Server IP (IP like- 112.23.134.5). I**
need to control many SIP Server IPs with limited channels to each with
my** Kamailio Proxy.*
*I am a newbie to kamailio world.*
*-- Warm Regds.MathuRahul*
16 May
16 May
10:33 p.m.
Create a profile [1], and count the number of calls of that profile [2].
Alternatively, you can use cnxcc module [3].
[1] http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1919576
[2] http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1964064
[3] http://kamailio.org/docs/modules/stable/modules/cnxcc.html#idp132608
On Fri, May 16, 2014 at 3:28 PM, Rahul MathuR <rahul.ultimate(a)gmail.com>wrote;wrote:
*Hello,*
*Please accept my apologies for asking a simple question - Is there any example which
shows how can I create the dialog profile **value based on the SIP domain or SIP Server IP
(IP like- 112.23.134.5). I** need to control many SIP Server IPs with limited channels to
each with my** Kamailio Proxy.*
*I am a newbie to kamailio world.*
*-- Warm Regds.MathuRahul*
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
11:28 p.m.
Thank you very much Carlos !
One last thing, can I use $fd in cnxcc_set_max_channels as below -
cnxcc_set_max_channels("$fd", "$var(max_chan)");
to restrict the simultaneous calls hitting a particular domain ?
On Sat, May 17, 2014 at 2:03 AM, Carlos Ruiz Díaz <carlos.ruizdiaz(a)gmail.com
wrote:
Create a profile [1], and count the number of calls of
that profile [2].
Alternatively, you can use cnxcc module [3].
[1] http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1919576
[2] http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1964064
[3] http://kamailio.org/docs/modules/stable/modules/cnxcc.html#idp132608
On Fri, May 16, 2014 at 3:28 PM, Rahul MathuR <rahul.ultimate(a)gmail.com>wrote;wrote:
--
Warm Regds.
MathuRahul
*Hello,*
*Please accept my apologies for asking a simple question - Is there any example which
shows how can I create the dialog profile **value based on the SIP domain or SIP Server IP
(IP like- 112.23.134.5). I** need to control many SIP Server IPs with limited channels to
each with my** Kamailio Proxy.*
*I am a newbie to kamailio world.*
*-- Warm Regds.MathuRahul*
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
11:31 p.m.
Any pseudo variable should work.
I don't exactly know how your business work, but I'd suggest that instead
of using from header domain, use the domain part of the request-uri, $rd.
Regards,
Carlos
On Fri, May 16, 2014 at 4:28 PM, Rahul MathuR <rahul.ultimate(a)gmail.com>wrote;wrote:
Thank you very much Carlos !
One last thing, can I use $fd in cnxcc_set_max_channels as below -
cnxcc_set_max_channels("$fd", "$var(max_chan)");
to restrict the simultaneous calls hitting a particular domain ?
On Sat, May 17, 2014 at 2:03 AM, Carlos Ruiz Díaz <
carlos.ruizdiaz(a)gmail.com> wrote:
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
Create a profile [1], and count the number of
calls of that profile [2].
Alternatively, you can use cnxcc module [3].
[1]
http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1919576
[2]
http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1964064
[3] http://kamailio.org/docs/modules/stable/modules/cnxcc.html#idp132608
On Fri, May 16, 2014 at 3:28 PM, Rahul MathuR <rahul.ultimate(a)gmail.com>wrote;wrote:
--
Warm Regds.
MathuRahul
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
*Hello,*
*Please accept my apologies for asking a simple question - Is there any example which
shows how can I create the dialog profile **value based on the SIP domain or SIP Server IP
(IP like- 112.23.134.5). I** need to control many SIP Server IPs with limited channels to
each with my** Kamailio Proxy.*
*I am a newbie to kamailio world.*
*-- Warm Regds.MathuRahul*
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
17 May
17 May
2:18 a.m.
Hello Carlos,
Many thanks for your help.
I followed the steps you mentioned for CNXCC. But even after making the
max. calls to 0, I am still able to connect the call. Below is the excerpt
from kamailio.cfg
request_route {
setflag(DLG_FLAG);
# per request initial checks
route(REQINIT);
# NAT detection
route(NATDETECT);
.
.
.
if (is_method("INVITE")) {
route(CNXCC);
}
}
#Below lines added by Rahul for Concurrent Call Restriction
route[CNXCC]
{
$var(client1) = "x.y.z.a";
#!ifdef CNXCC_CHANNEL
xlog("L_INFO", "Setting up channel based credit control");
$var(max_chan1) = 0;
$var(retcode) = cnxcc_set_max_channels("$var(client1)",
"$var(max_chan)");
if ($var(retcode) == -1) {
xlog("Error setting up credit control");
return;
}
$var(count1) = -1;
if (!cnxcc_get_channel_count("$rd", "$var(count1)")) {
xlog("Error getting customer's channel count");
}
xlog("RAHUL : CNXCC ROUTE: $var(client) has $var(count) call(s)");
xlog("L_INFO", "CNXCC ROUTE: $var(client) has $var(count)
call(s)");
if ($var(count1) == $var(max_chan1)) {
xlog("Too many channels for customer");
sl_send_reply(403, "Forbidden");
#if (!cnxcc_terminate_all("$var(client)")) {
# xlog("Error terminating customer's calls");
#}
exit;
}
#!endif
Could you please guide me where am I doing wrong ?
On Sat, May 17, 2014 at 3:01 AM, Carlos Ruiz Díaz <carlos.ruizdiaz(a)gmail.com
wrote:
> Any pseudo variable should work.
>
> I don't exactly know how your business work, but I'd suggest that instead
> of using from header domain, use the domain part of the request-uri, $rd.
>
> Regards,
> Carlos
>
>
> On Fri, May 16, 2014 at 4:28 PM, Rahul MathuR <rahul.ultimate(a)gmail.com>wrote;wrote:
>
>> Thank you very much Carlos !
>>
>> One last thing, can I use $fd in cnxcc_set_max_channels as below -
>> cnxcc_set_max_channels("$fd", "$var(max_chan)");
>> to restrict the simultaneous calls hitting a particular domain ?
>>
>>
>>
>>
>> On Sat, May 17, 2014 at 2:03 AM, Carlos Ruiz Díaz <
>> carlos.ruizdiaz(a)gmail.com wrote:
>>
>>> Create a profile [1], and count the number of calls of that profile [2].
>>>
>>> Alternatively, you can use cnxcc module [3].
>>>
>>> [1]
>>> http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1919576
>>> [2]
>>> http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1964064
>>> [3] http://kamailio.org/docs/modules/stable/modules/cnxcc.html#idp132608
>>>
>>>
>>> On Fri, May 16, 2014 at 3:28 PM, Rahul MathuR
<rahul.ultimate(a)gmail.com>wrote;wrote:
>>>
>>>> *Hello,*
>>>>
>>>> *Please accept my apologies for asking a simple question - Is there any
example which shows how can I create the dialog profile **value based on the SIP domain or
SIP Server IP (IP like- 112.23.134.5). I** need to control many SIP Server IPs with
limited channels to each with my** Kamailio Proxy.*
>>>>
>>>> *I am a newbie to kamailio world.*
>>>>
>>>>
>>>>
>>>> *-- Warm Regds.MathuRahul*
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> sr-dev mailing list
>>>> sr-dev(a)lists.sip-router.org
>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>
>>>>
>>>
>>>
>>> --
>>> Carlos
>>> http://caruizdiaz.com
>>> http://ngvoice.com
>>> +52 55 3048 3303
>>>
>>> _______________________________________________
>>> sr-dev mailing list
>>> sr-dev(a)lists.sip-router.org
>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>
>>>
>>
>>
>> --
>> Warm Regds.
>> MathuRahul
>>
>> _______________________________________________
>> sr-dev mailing list
>> sr-dev(a)lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>
>>
>
>
> --
> Carlos
> http://caruizdiaz.com
> http://ngvoice.com
> +52 55 3048 3303
>
> _______________________________________________
> sr-dev mailing list
> sr-dev(a)lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>
>
--
Warm Regds.
MathuRahul
2:52 a.m.
Further, from the logs it seems that cnxcc_set_max_channels is returning -1
and I have no idea why it is failing.
On Sat, May 17, 2014 at 5:48 AM, Rahul MathuR <rahul.ultimate(a)gmail.com>wrote;wrote:
Hello Carlos,
Many thanks for your help.
I followed the steps you mentioned for CNXCC. But even after making the
max. calls to 0, I am still able to connect the call. Below is the excerpt
from kamailio.cfg
request_route {
setflag(DLG_FLAG);
# per request initial checks
route(REQINIT);
# NAT detection
route(NATDETECT);
.
.
.
if (is_method("INVITE")) {
route(CNXCC);
}
}
#Below lines added by Rahul for Concurrent Call Restriction
route[CNXCC]
{
$var(client1) = "x.y.z.a";
#!ifdef CNXCC_CHANNEL
xlog("L_INFO", "Setting up channel based credit control");
$var(max_chan1) = 0;
$var(retcode) = cnxcc_set_max_channels("$var(client1)",
"$var(max_chan)");
if ($var(retcode) == -1) {
xlog("Error setting up credit control");
return;
}
$var(count1) = -1;
if (!cnxcc_get_channel_count("$rd", "$var(count1)")) {
xlog("Error getting customer's channel count");
}
xlog("RAHUL : CNXCC ROUTE: $var(client) has $var(count) call(s)");
xlog("L_INFO", "CNXCC ROUTE: $var(client) has $var(count)
call(s)");
if ($var(count1) == $var(max_chan1)) {
xlog("Too many channels for customer");
sl_send_reply(403, "Forbidden");
#if (!cnxcc_terminate_all("$var(client)")) {
# xlog("Error terminating customer's calls");
#}
exit;
}
#!endif
Could you please guide me where am I doing wrong ?
On Sat, May 17, 2014 at 3:01 AM, Carlos Ruiz Díaz <
carlos.ruizdiaz(a)gmail.com> wrote:
--
Warm Regds.
MathuRahul
Any pseudo variable should work.
I don't exactly know how your business work, but I'd suggest that instead
of using from header domain, use the domain part of the request-uri, $rd.
Regards,
Carlos
On Fri, May 16, 2014 at 4:28 PM, Rahul MathuR <rahul.ultimate(a)gmail.com>wrote;wrote:
--
Warm Regds.
MathuRahul
Thank you very much Carlos !
One last thing, can I use $fd in cnxcc_set_max_channels as below -
cnxcc_set_max_channels("$fd", "$var(max_chan)");
to restrict the simultaneous calls hitting a particular domain ?
On Sat, May 17, 2014 at 2:03 AM, Carlos Ruiz Díaz <
carlos.ruizdiaz(a)gmail.com> wrote:
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
Create a profile [1], and count the number of
calls of that profile [2].
Alternatively, you can use cnxcc module [3].
[1]
http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1919576
[2]
http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1964064
[3]
http://kamailio.org/docs/modules/stable/modules/cnxcc.html#idp132608
On Fri, May 16, 2014 at 3:28 PM, Rahul MathuR <rahul.ultimate(a)gmail.com
> wrote:
> *Hello,*
>
> *Please accept my apologies for asking a simple question - Is there any example which
shows how can I create the dialog profile **value based on the SIP domain or SIP Server IP
(IP like- 112.23.134.5). I** need to control many SIP Server IPs with limited channels to
each with my** Kamailio Proxy.*
>
> *I am a newbie to kamailio world.*
>
>
>
> *-- Warm Regds.MathuRahul*
>
>
>
> _______________________________________________
> sr-dev mailing list
> sr-dev(a)lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>
>
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Warm Regds.
MathuRahul
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
3:22 a.m.
max_chan is equal to zero? You should put a positive value in here in order
to make sense the function call.
Also, you are using for one call the ID "x.y.z.a", and for the other one
$rd. Both should be the same for calls that suppose to be organized in the
same group.
Please take a look at the docs.
On Fri, May 16, 2014 at 7:52 PM, Rahul MathuR <rahul.ultimate(a)gmail.com>wrote;wrote:
Further, from the logs it seems that
cnxcc_set_max_channels is returning
-1 and I have no idea why it is failing.
On Sat, May 17, 2014 at 5:48 AM, Rahul MathuR <rahul.ultimate(a)gmail.com>wrote;wrote:
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
Hello Carlos,
Many thanks for your help.
I followed the steps you mentioned for CNXCC. But even after making the
max. calls to 0, I am still able to connect the call. Below is the excerpt
from kamailio.cfg
request_route {
setflag(DLG_FLAG);
# per request initial checks
route(REQINIT);
# NAT detection
route(NATDETECT);
.
.
.
if (is_method("INVITE")) {
route(CNXCC);
}
}
#Below lines added by Rahul for Concurrent Call Restriction
route[CNXCC]
{
$var(client1) = "x.y.z.a";
#!ifdef CNXCC_CHANNEL
xlog("L_INFO", "Setting up channel based credit control");
$var(max_chan1) = 0;
$var(retcode) = cnxcc_set_max_channels("$var(client1)",
"$var(max_chan)");
if ($var(retcode) == -1) {
xlog("Error setting up credit control");
return;
}
$var(count1) = -1;
if (!cnxcc_get_channel_count("$rd", "$var(count1)")) {
xlog("Error getting customer's channel count");
}
xlog("RAHUL : CNXCC ROUTE: $var(client) has $var(count) call(s)");
xlog("L_INFO", "CNXCC ROUTE: $var(client) has $var(count)
call(s)");
if ($var(count1) == $var(max_chan1)) {
xlog("Too many channels for customer");
sl_send_reply(403, "Forbidden");
#if (!cnxcc_terminate_all("$var(client)")) {
# xlog("Error terminating customer's calls");
#}
exit;
}
#!endif
Could you please guide me where am I doing wrong ?
On Sat, May 17, 2014 at 3:01 AM, Carlos Ruiz Díaz <
carlos.ruizdiaz(a)gmail.com> wrote:
--
Warm Regds.
MathuRahul
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
Any pseudo variable should work.
I don't exactly know how your business work, but I'd suggest that
instead of using from header domain, use the domain part of the
request-uri, $rd.
Regards,
Carlos
On Fri, May 16, 2014 at 4:28 PM, Rahul MathuR <rahul.ultimate(a)gmail.com>wrote;wrote:
--
Warm Regds.
MathuRahul
Thank you very much Carlos !
One last thing, can I use $fd in cnxcc_set_max_channels as below -
cnxcc_set_max_channels("$fd", "$var(max_chan)");
to restrict the simultaneous calls hitting a particular domain ?
On Sat, May 17, 2014 at 2:03 AM, Carlos Ruiz Díaz <
carlos.ruizdiaz(a)gmail.com> wrote:
> Create a profile [1], and count the number of calls of that profile
> [2].
>
> Alternatively, you can use cnxcc module [3].
>
> [1]
> http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1919576
> [2]
> http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1964064
> [3]
> http://kamailio.org/docs/modules/stable/modules/cnxcc.html#idp132608
>
>
> On Fri, May 16, 2014 at 3:28 PM, Rahul MathuR <
> rahul.ultimate(a)gmail.com> wrote:
>
>> *Hello,*
>>
>> *Please accept my apologies for asking a simple question - Is there any example
which shows how can I create the dialog profile **value based on the SIP domain or SIP
Server IP (IP like- 112.23.134.5). I** need to control many SIP Server IPs with limited
channels to each with my** Kamailio Proxy.*
>>
>> *I am a newbie to kamailio world.*
>>
>>
>>
>> *-- Warm Regds.MathuRahul*
>>
>>
>>
>> _______________________________________________
>> sr-dev mailing list
>> sr-dev(a)lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>
>>
>
>
> --
> Carlos
> http://caruizdiaz.com
> http://ngvoice.com
> +52 55 3048 3303
>
> _______________________________________________
> sr-dev mailing list
> sr-dev(a)lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>
>
--
Warm Regds.
MathuRahul
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
3 Jun
3 Jun
2:01 p.m.
Hi Carlos,
Sorry for coming late on this one.
the ruri value in my example is '10.97.116.36'
and i have tried to configure kamailio to only cater 100 simultaneous calls
on this SIP Server (10.97.116.36), after that it is to send 403.
Below is the sample logic from kamailio.cfg
***********************************************************************************************************************
#Below lines to show an example of how I am maintaining the business for
Concurrent Call Restriction
route[CNXCC]
{
$var(client1) = "10.97.116.36";
$var(max_chan) = 100;
#!ifdef CNXCC_CHANNEL
xlog("L_INFO", "Setting up channel based credit control");
$var(max_chan1) = 0;
$var(retcode) = cnxcc_set_max_channels("$var(client1)",
"$var(max_chan)");
if ($var(retcode) == -1) {
xlog("Error setting up credit control");
return;
}
$var(count1) = -1;
if (!cnxcc_get_channel_count("$rd", "$var(count1)")) {
xlog("Error getting customer's channel count");
}
xlog("RAHUL : CNXCC ROUTE: $var(client1) has $var(count1)
call(s)");
xlog("L_INFO", "CNXCC ROUTE: $var(client1) has $var(count1)
call(s)");
if ($var(count1) == $var(max_chan1)) {
xlog("Too many channels for customer");
sl_send_reply(403, "Forbidden");
exit;
}
#!endif
******************************************************************************************************************************************************
Now the problem that I am facing is that with multiple UACs (all with same
ruri - 10.97.116.36) dialing some pstn numbers, the value of "count1"
remains 1 for all cases. Hence, my purpose is defeated because the
restriction is not being laid and more than 'max_chan' no. of callers are
able to make the call.
Could you please help me achieve this goal.
Thanks !
On Sat, May 17, 2014 at 2:22 AM, Carlos Ruiz Díaz <carlos.ruizdiaz(a)gmail.com
wrote:
> max_chan is equal to zero? You should put a positive value in here in
> order to make sense the function call.
>
> Also, you are using for one call the ID "x.y.z.a", and for the other one
> $rd. Both should be the same for calls that suppose to be organized in the
> same group.
>
> Please take a look at the docs.
>
>
> On Fri, May 16, 2014 at 7:52 PM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
>
>> Further, from the logs it seems that cnxcc_set_max_channels is returning
>> -1 and I have no idea why it is failing.
>>
>>
>> On Sat, May 17, 2014 at 5:48 AM, Rahul MathuR <rahul.ultimate(a)gmail.com>
> wrote:
>>
>>> Hello Carlos,
>>>
>>> Many thanks for your help.
>>> I followed the steps you mentioned for CNXCC. But even after making the
>>> max. calls to 0, I am still able to connect the call. Below is the excerpt
>>> from kamailio.cfg
>>>
>>> request_route {
>>> setflag(DLG_FLAG);
>>> # per request initial checks
>>> route(REQINIT);
>>> # NAT detection
>>> route(NATDETECT);
>>> .
>>> .
>>> .
>>>
>>> if (is_method("INVITE")) {
>>> route(CNXCC);
>>> }
>>> }
>>>
>>> #Below lines added by Rahul for Concurrent Call Restriction
>>> route[CNXCC]
>>> {
>>>
>>> $var(client1) = "x.y.z.a";
>>>
>>> #!ifdef CNXCC_CHANNEL
>>> xlog("L_INFO", "Setting up channel based credit
control");
>>>
>>> $var(max_chan1) = 0;
>>> $var(retcode) = cnxcc_set_max_channels("$var(client1)",
>>> "$var(max_chan)");
>>>
>>> if ($var(retcode) == -1) {
>>> xlog("Error setting up credit control");
>>> return;
>>> }
>>>
>>> $var(count1) = -1;
>>>
>>> if (!cnxcc_get_channel_count("$rd",
"$var(count1)")) {
>>> xlog("Error getting customer's channel
count");
>>> }
>>> xlog("RAHUL : CNXCC ROUTE: $var(client) has $var(count)
>>> call(s)");
>>> xlog("L_INFO", "CNXCC ROUTE: $var(client) has
$var(count)
>>> call(s)");
>>>
>>> if ($var(count1) == $var(max_chan1)) {
>>> xlog("Too many channels for customer");
>>> sl_send_reply(403, "Forbidden");
>>>
>>> #if (!cnxcc_terminate_all("$var(client)")) {
>>> # xlog("Error terminating customer's
calls");
>>> #}
>>>
>>> exit;
>>> }
>>> #!endif
>>>
>>>
>>> Could you please guide me where am I doing wrong ?
>>>
>>>
>>> On Sat, May 17, 2014 at 3:01 AM, Carlos Ruiz Díaz <
>>> carlos.ruizdiaz(a)gmail.com
wrote:
>>>
>>>> Any pseudo variable should work.
>>>>
>>>> I don't exactly know how your business work, but I'd suggest
that
>>>> instead of using from header domain, use the domain part of the
>>>> request-uri, $rd.
>>>>
>>>> Regards,
>>>> Carlos
>>>>
>>>>
>>>> On Fri, May 16, 2014 at 4:28 PM, Rahul MathuR
<rahul.ultimate(a)gmail.com
>>>> wrote:
>>>>
>>>>> Thank you very much Carlos !
>>>>>
>>>>> One last thing, can I use $fd in cnxcc_set_max_channels as below -
>>>>> cnxcc_set_max_channels("$fd", "$var(max_chan)");
>>>>> to restrict the simultaneous calls hitting a particular domain ?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Sat, May 17, 2014 at 2:03 AM, Carlos Ruiz Díaz <
>>>>> carlos.ruizdiaz(a)gmail.com
wrote:
>>>>>
>>>>>> Create a profile [1], and count the number of calls of that
profile
>>>>>> [2].
>>>>>>
>>>>>> Alternatively, you can use cnxcc module [3].
>>>>>>
>>>>>> [1]
>>>>>>
http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1919576
>>>>>> [2]
>>>>>>
http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1964064
>>>>>> [3]
>>>>>>
http://kamailio.org/docs/modules/stable/modules/cnxcc.html#idp132608
>>>>>>
>>>>>>
>>>>>> On Fri, May 16, 2014 at 3:28 PM, Rahul MathuR <
>>>>>> rahul.ultimate(a)gmail.com
wrote:
>>>>>>
>>>>>>> *Hello,*
>>>>>>>
>>>>>>> *Please accept my apologies for asking a simple question - Is
there any example which shows how can I create the dialog profile **value based on the SIP
domain or SIP Server IP (IP like- 112.23.134.5). I** need to control many SIP Server IPs
with limited channels to each with my** Kamailio Proxy.*
>>>>>>>
>>>>>>> *I am a newbie to kamailio world.*
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> *-- Warm Regds.MathuRahul*
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> sr-dev mailing list
>>>>>>> sr-dev(a)lists.sip-router.org
>>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Carlos
>>>>>> http://caruizdiaz.com
>>>>>> http://ngvoice.com
>>>>>> +52 55 3048 3303
>>>>>>
>>>>>> _______________________________________________
>>>>>> sr-dev mailing list
>>>>>> sr-dev(a)lists.sip-router.org
>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Warm Regds.
>>>>> MathuRahul
>>>>>
>>>>> _______________________________________________
>>>>> sr-dev mailing list
>>>>> sr-dev(a)lists.sip-router.org
>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Carlos
>>>> http://caruizdiaz.com
>>>> http://ngvoice.com
>>>> +52 55 3048 3303
>>>>
>>>> _______________________________________________
>>>> sr-dev mailing list
>>>> sr-dev(a)lists.sip-router.org
>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>
>>>>
>>>
>>>
>>> --
>>> Warm Regds.
>>> MathuRahul
>>>
>>
>>
>>
>> --
>> Warm Regds.
>> MathuRahul
>>
>> _______________________________________________
>> sr-dev mailing list
>> sr-dev(a)lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>
>>
>
>
> --
> Carlos
> http://caruizdiaz.com
> http://ngvoice.com
> +52 55 3048 3303
>
> _______________________________________________
> sr-dev mailing list
> sr-dev(a)lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>
>
--
Warm Regds.
MathuRahul
3:18 p.m.
Hi Rahul,
I don't understand your example. In that case, you are always using
"10.97.116.36"
as key, meaning that all calls will be hanging from same root.
If you want to use the request-uri domain part, use $rd, not the full $ru.
This will of course lead to 1 call being reported always, since
request-URIs tend to be different from each other.
Regards,
Carlos
On Tue, Jun 3, 2014 at 7:01 AM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
Hi Carlos,
Sorry for coming late on this one.
the ruri value in my example is '10.97.116.36'
and i have tried to configure kamailio to only cater 100 simultaneous
calls on this SIP Server (10.97.116.36), after that it is to send 403.
Below is the sample logic from kamailio.cfg
***********************************************************************************************************************
#Below lines to show an example of how I am maintaining the business for
Concurrent Call Restriction
route[CNXCC]
{
$var(client1) = "10.97.116.36";
$var(max_chan) = 100;
#!ifdef CNXCC_CHANNEL
xlog("L_INFO", "Setting up channel based credit control");
$var(max_chan1) = 0;
$var(retcode) = cnxcc_set_max_channels("$var(client1)",
"$var(max_chan)");
if ($var(retcode) == -1) {
xlog("Error setting up credit control");
return;
}
$var(count1) = -1;
if (!cnxcc_get_channel_count("$rd", "$var(count1)")) {
xlog("Error getting customer's channel count");
}
xlog("RAHUL : CNXCC ROUTE: $var(client1) has $var(count1)
call(s)");
xlog("L_INFO", "CNXCC ROUTE: $var(client1) has $var(count1)
call(s)");
if ($var(count1) == $var(max_chan1)) {
xlog("Too many channels for customer");
sl_send_reply(403, "Forbidden");
exit;
}
#!endif
******************************************************************************************************************************************************
Now the problem that I am facing is that with multiple UACs (all with same
ruri - 10.97.116.36) dialing some pstn numbers, the value of "count1"
remains 1 for all cases. Hence, my purpose is defeated because the
restriction is not being laid and more than 'max_chan' no. of callers are
able to make the call.
Could you please help me achieve this goal.
Thanks !
On Sat, May 17, 2014 at 2:22 AM, Carlos Ruiz Díaz <
carlos.ruizdiaz(a)gmail.com> wrote:
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
max_chan is equal to zero? You should put a
positive value in here in
order to make sense the function call.
Also, you are using for one call the ID "x.y.z.a", and for the other one
$rd. Both should be the same for calls that suppose to be organized in the
same group.
Please take a look at the docs.
On Fri, May 16, 2014 at 7:52 PM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
--
Warm Regds.
MathuRahul
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
Further, from the logs it seems that
cnxcc_set_max_channels is returning
-1 and I have no idea why it is failing.
On Sat, May 17, 2014 at 5:48 AM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
Hello Carlos,
Many thanks for your help.
I followed the steps you mentioned for CNXCC. But even after making the
max. calls to 0, I am still able to connect the call. Below is the excerpt
from kamailio.cfg
request_route {
setflag(DLG_FLAG);
# per request initial checks
route(REQINIT);
# NAT detection
route(NATDETECT);
.
.
.
if (is_method("INVITE")) {
route(CNXCC);
}
}
#Below lines added by Rahul for Concurrent Call Restriction
route[CNXCC]
{
$var(client1) = "x.y.z.a";
#!ifdef CNXCC_CHANNEL
xlog("L_INFO", "Setting up channel based credit control");
$var(max_chan1) = 0;
$var(retcode) = cnxcc_set_max_channels("$var(client1)",
"$var(max_chan)");
if ($var(retcode) == -1) {
xlog("Error setting up credit control");
return;
}
$var(count1) = -1;
if (!cnxcc_get_channel_count("$rd", "$var(count1)")) {
xlog("Error getting customer's channel count");
}
xlog("RAHUL : CNXCC ROUTE: $var(client) has $var(count)
call(s)");
xlog("L_INFO", "CNXCC ROUTE: $var(client) has $var(count)
call(s)");
if ($var(count1) == $var(max_chan1)) {
xlog("Too many channels for customer");
sl_send_reply(403, "Forbidden");
#if (!cnxcc_terminate_all("$var(client)")) {
# xlog("Error terminating customer's calls");
#}
exit;
}
#!endif
Could you please guide me where am I doing wrong ?
On Sat, May 17, 2014 at 3:01 AM, Carlos Ruiz Díaz <
carlos.ruizdiaz(a)gmail.com> wrote:
> Any pseudo variable should work.
>
> I don't exactly know how your business work, but I'd suggest that
> instead of using from header domain, use the domain part of the
> request-uri, $rd.
>
> Regards,
> Carlos
>
>
> On Fri, May 16, 2014 at 4:28 PM, Rahul MathuR <
> rahul.ultimate(a)gmail.com> wrote:
>
>> Thank you very much Carlos !
>>
>> One last thing, can I use $fd in cnxcc_set_max_channels as below -
>> cnxcc_set_max_channels("$fd", "$var(max_chan)");
>> to restrict the simultaneous calls hitting a particular domain ?
>>
>>
>>
>>
>> On Sat, May 17, 2014 at 2:03 AM, Carlos Ruiz Díaz <
>> carlos.ruizdiaz(a)gmail.com> wrote:
>>
>>> Create a profile [1], and count the number of calls of that profile
>>> [2].
>>>
>>> Alternatively, you can use cnxcc module [3].
>>>
>>> [1]
>>> http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1919576
>>> [2]
>>> http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1964064
>>> [3]
>>> http://kamailio.org/docs/modules/stable/modules/cnxcc.html#idp132608
>>>
>>>
>>> On Fri, May 16, 2014 at 3:28 PM, Rahul MathuR <
>>> rahul.ultimate(a)gmail.com> wrote:
>>>
>>>> *Hello,*
>>>>
>>>> *Please accept my apologies for asking a simple question - Is there any
example which shows how can I create the dialog profile **value based on the SIP domain or
SIP Server IP (IP like- 112.23.134.5). I** need to control many SIP Server IPs with
limited channels to each with my** Kamailio Proxy.*
>>>>
>>>> *I am a newbie to kamailio world.*
>>>>
>>>>
>>>>
>>>> *-- Warm Regds.MathuRahul*
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> sr-dev mailing list
>>>> sr-dev(a)lists.sip-router.org
>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>
>>>>
>>>
>>>
>>> --
>>> Carlos
>>> http://caruizdiaz.com
>>> http://ngvoice.com
>>> +52 55 3048 3303
>>>
>>> _______________________________________________
>>> sr-dev mailing list
>>> sr-dev(a)lists.sip-router.org
>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>
>>>
>>
>>
>> --
>> Warm Regds.
>> MathuRahul
>>
>> _______________________________________________
>> sr-dev mailing list
>> sr-dev(a)lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>
>>
>
>
> --
> Carlos
> http://caruizdiaz.com
> http://ngvoice.com
> +52 55 3048 3303
>
> _______________________________________________
> sr-dev mailing list
> sr-dev(a)lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>
>
--
Warm Regds.
MathuRahul
--
Warm Regds.
MathuRahul
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
4 Jun
4 Jun
8:03 a.m.
HI Carlos,
Thanks for reply.
In my case the key is SIP Server IP. My kamailio Proxy is connected to many
sip server IPs say 5. I want to limit maximum channels per sip server ip.
So I set max channels per sip server ip as
cnxcc_set_max_channels("$var(client1)", "$var(max_chan)"); and my
$var(client1) = "10.97.116.36"; is one of 5 sip servers connected to
Kamalio.
Now I use your cnxcc_get_channel_count("$rd", "$var(count1)"))
value(count1) to compare to the max_limit of the channels allowed for this
sip server. Psuedo Variable $rd is coming correctly that is same as sips
erver IP[$var(client1)].
But the problem is that cnxcc_get_channel_count("$rd",
"$var(count1)")) is
always setting the value 1 in $var(count1) variable even though there are
more calls runnning than what was set to be max_chan (which was 100 in my
case).
Any pointers to achieve this matter ?
On Tue, Jun 3, 2014 at 2:18 PM, Carlos Ruiz Díaz <carlos.ruizdiaz(a)gmail.com>
wrote:
Hi Rahul,
I don't understand your example. In that case, you are always using
"10.97.116.36"
as key, meaning that all calls will be hanging from same root.
If you want to use the request-uri domain part, use $rd, not the full $ru.
This will of course lead to 1 call being reported always, since
request-URIs tend to be different from each other.
Regards,
Carlos
On Tue, Jun 3, 2014 at 7:01 AM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
--
Warm Regds.
MathuRahul
Hi Carlos,
Sorry for coming late on this one.
the ruri value in my example is '10.97.116.36'
and i have tried to configure kamailio to only cater 100 simultaneous
calls on this SIP Server (10.97.116.36), after that it is to send 403.
Below is the sample logic from kamailio.cfg
***********************************************************************************************************************
#Below lines to show an example of how I am maintaining the business
for Concurrent Call Restriction
route[CNXCC]
{
$var(client1) = "10.97.116.36";
$var(max_chan) = 100;
#!ifdef CNXCC_CHANNEL
xlog("L_INFO", "Setting up channel based credit control");
$var(max_chan1) = 0;
$var(retcode) = cnxcc_set_max_channels("$var(client1)",
"$var(max_chan)");
if ($var(retcode) == -1) {
xlog("Error setting up credit control");
return;
}
$var(count1) = -1;
if (!cnxcc_get_channel_count("$rd", "$var(count1)")) {
xlog("Error getting customer's channel count");
}
xlog("RAHUL : CNXCC ROUTE: $var(client1) has $var(count1)
call(s)");
xlog("L_INFO", "CNXCC ROUTE: $var(client1) has $var(count1)
call(s)");
if ($var(count1) == $var(max_chan1)) {
xlog("Too many channels for customer");
sl_send_reply(403, "Forbidden");
exit;
}
#!endif
******************************************************************************************************************************************************
Now the problem that I am facing is that with multiple UACs (all with
same ruri - 10.97.116.36) dialing some pstn numbers, the value of "count1"
remains 1 for all cases. Hence, my purpose is defeated because the
restriction is not being laid and more than 'max_chan' no. of callers are
able to make the call.
Could you please help me achieve this goal.
Thanks !
On Sat, May 17, 2014 at 2:22 AM, Carlos Ruiz Díaz <
carlos.ruizdiaz(a)gmail.com> wrote:
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
max_chan is equal to zero? You should put a
positive value in here in
order to make sense the function call.
Also, you are using for one call the ID "x.y.z.a", and for the other one
$rd. Both should be the same for calls that suppose to be organized in the
same group.
Please take a look at the docs.
On Fri, May 16, 2014 at 7:52 PM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
--
Warm Regds.
MathuRahul
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
Further, from the logs it seems that
cnxcc_set_max_channels is
returning -1 and I have no idea why it is failing.
On Sat, May 17, 2014 at 5:48 AM, Rahul MathuR <rahul.ultimate(a)gmail.com
> wrote:
> Hello Carlos,
>
> Many thanks for your help.
> I followed the steps you mentioned for CNXCC. But even after making
> the max. calls to 0, I am still able to connect the call. Below is the
> excerpt from kamailio.cfg
>
> request_route {
> setflag(DLG_FLAG);
> # per request initial checks
> route(REQINIT);
> # NAT detection
> route(NATDETECT);
> .
> .
> .
>
> if (is_method("INVITE")) {
> route(CNXCC);
> }
> }
>
> #Below lines added by Rahul for Concurrent Call Restriction
> route[CNXCC]
> {
>
> $var(client1) = "x.y.z.a";
>
> #!ifdef CNXCC_CHANNEL
> xlog("L_INFO", "Setting up channel based credit
control");
>
> $var(max_chan1) = 0;
> $var(retcode) = cnxcc_set_max_channels("$var(client1)",
> "$var(max_chan)");
>
> if ($var(retcode) == -1) {
> xlog("Error setting up credit control");
> return;
> }
>
> $var(count1) = -1;
>
> if (!cnxcc_get_channel_count("$rd", "$var(count1)")) {
> xlog("Error getting customer's channel count");
> }
> xlog("RAHUL : CNXCC ROUTE: $var(client) has $var(count)
> call(s)");
> xlog("L_INFO", "CNXCC ROUTE: $var(client) has $var(count)
> call(s)");
>
> if ($var(count1) == $var(max_chan1)) {
> xlog("Too many channels for customer");
> sl_send_reply(403, "Forbidden");
>
> #if (!cnxcc_terminate_all("$var(client)")) {
> # xlog("Error terminating customer's calls");
> #}
>
> exit;
> }
> #!endif
>
>
> Could you please guide me where am I doing wrong ?
>
>
> On Sat, May 17, 2014 at 3:01 AM, Carlos Ruiz Díaz <
> carlos.ruizdiaz(a)gmail.com> wrote:
>
>> Any pseudo variable should work.
>>
>> I don't exactly know how your business work, but I'd suggest that
>> instead of using from header domain, use the domain part of the
>> request-uri, $rd.
>>
>> Regards,
>> Carlos
>>
>>
>> On Fri, May 16, 2014 at 4:28 PM, Rahul MathuR <
>> rahul.ultimate(a)gmail.com> wrote:
>>
>>> Thank you very much Carlos !
>>>
>>> One last thing, can I use $fd in cnxcc_set_max_channels as below -
>>> cnxcc_set_max_channels("$fd", "$var(max_chan)");
>>> to restrict the simultaneous calls hitting a particular domain ?
>>>
>>>
>>>
>>>
>>> On Sat, May 17, 2014 at 2:03 AM, Carlos Ruiz Díaz <
>>> carlos.ruizdiaz(a)gmail.com> wrote:
>>>
>>>> Create a profile [1], and count the number of calls of that profile
>>>> [2].
>>>>
>>>> Alternatively, you can use cnxcc module [3].
>>>>
>>>> [1]
>>>> http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1919576
>>>> [2]
>>>> http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1964064
>>>> [3]
>>>> http://kamailio.org/docs/modules/stable/modules/cnxcc.html#idp132608
>>>>
>>>>
>>>> On Fri, May 16, 2014 at 3:28 PM, Rahul MathuR <
>>>> rahul.ultimate(a)gmail.com> wrote:
>>>>
>>>>> *Hello,*
>>>>>
>>>>> *Please accept my apologies for asking a simple question - Is there
any example which shows how can I create the dialog profile **value based on the SIP
domain or SIP Server IP (IP like- 112.23.134.5). I** need to control many SIP Server IPs
with limited channels to each with my** Kamailio Proxy.*
>>>>>
>>>>> *I am a newbie to kamailio world.*
>>>>>
>>>>>
>>>>>
>>>>> *-- Warm Regds.MathuRahul*
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> sr-dev mailing list
>>>>> sr-dev(a)lists.sip-router.org
>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Carlos
>>>> http://caruizdiaz.com
>>>> http://ngvoice.com
>>>> +52 55 3048 3303
>>>>
>>>> _______________________________________________
>>>> sr-dev mailing list
>>>> sr-dev(a)lists.sip-router.org
>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>
>>>>
>>>
>>>
>>> --
>>> Warm Regds.
>>> MathuRahul
>>>
>>> _______________________________________________
>>> sr-dev mailing list
>>> sr-dev(a)lists.sip-router.org
>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>
>>>
>>
>>
>> --
>> Carlos
>> http://caruizdiaz.com
>> http://ngvoice.com
>> +52 55 3048 3303
>>
>> _______________________________________________
>> sr-dev mailing list
>> sr-dev(a)lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>
>>
>
>
> --
> Warm Regds.
> MathuRahul
>
--
Warm Regds.
MathuRahul
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
4:07 p.m.
Can you share your configuration file?
On Wed, Jun 4, 2014 at 1:03 AM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
HI Carlos,
Thanks for reply.
In my case the key is SIP Server IP. My kamailio Proxy is connected to
many sip server IPs say 5. I want to limit maximum channels per sip server
ip. So I set max channels per sip server ip as
cnxcc_set_max_channels("$var(client1)", "$var(max_chan)"); and my
$var(client1) = "10.97.116.36"; is one of 5 sip servers connected to
Kamalio.
Now I use your cnxcc_get_channel_count("$rd", "$var(count1)"))
value(count1) to compare to the max_limit of the channels allowed for this
sip server. Psuedo Variable $rd is coming correctly that is same as sips
erver IP[$var(client1)].
But the problem is that cnxcc_get_channel_count("$rd",
"$var(count1)"))
is always setting the value 1 in $var(count1) variable even though there
are more calls runnning than what was set to be max_chan (which was 100 in
my case).
Any pointers to achieve this matter ?
On Tue, Jun 3, 2014 at 2:18 PM, Carlos Ruiz Díaz <
carlos.ruizdiaz(a)gmail.com> wrote:
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
Hi Rahul,
I don't understand your example. In that case, you are always using
"10.97.116.36"
as key, meaning that all calls will be hanging from same root.
If you want to use the request-uri domain part, use $rd, not the full
$ru. This will of course lead to 1 call being reported always, since
request-URIs tend to be different from each other.
Regards,
Carlos
On Tue, Jun 3, 2014 at 7:01 AM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
--
Warm Regds.
MathuRahul
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
Hi Carlos,
Sorry for coming late on this one.
the ruri value in my example is '10.97.116.36'
and i have tried to configure kamailio to only cater 100 simultaneous
calls on this SIP Server (10.97.116.36), after that it is to send 403.
Below is the sample logic from kamailio.cfg
***********************************************************************************************************************
#Below lines to show an example of how I am maintaining the business
for Concurrent Call Restriction
route[CNXCC]
{
$var(client1) = "10.97.116.36";
$var(max_chan) = 100;
#!ifdef CNXCC_CHANNEL
xlog("L_INFO", "Setting up channel based credit control");
$var(max_chan1) = 0;
$var(retcode) = cnxcc_set_max_channels("$var(client1)",
"$var(max_chan)");
if ($var(retcode) == -1) {
xlog("Error setting up credit control");
return;
}
$var(count1) = -1;
if (!cnxcc_get_channel_count("$rd", "$var(count1)")) {
xlog("Error getting customer's channel count");
}
xlog("RAHUL : CNXCC ROUTE: $var(client1) has $var(count1)
call(s)");
xlog("L_INFO", "CNXCC ROUTE: $var(client1) has $var(count1)
call(s)");
if ($var(count1) == $var(max_chan1)) {
xlog("Too many channels for customer");
sl_send_reply(403, "Forbidden");
exit;
}
#!endif
******************************************************************************************************************************************************
Now the problem that I am facing is that with multiple UACs (all with
same ruri - 10.97.116.36) dialing some pstn numbers, the value of "count1"
remains 1 for all cases. Hence, my purpose is defeated because the
restriction is not being laid and more than 'max_chan' no. of callers are
able to make the call.
Could you please help me achieve this goal.
Thanks !
On Sat, May 17, 2014 at 2:22 AM, Carlos Ruiz Díaz <
carlos.ruizdiaz(a)gmail.com> wrote:
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
max_chan is equal to zero? You should put a
positive value in here in
order to make sense the function call.
Also, you are using for one call the ID "x.y.z.a", and for the other
one $rd. Both should be the same for calls that suppose to be organized in
the same group.
Please take a look at the docs.
On Fri, May 16, 2014 at 7:52 PM, Rahul MathuR <rahul.ultimate(a)gmail.com
> wrote:
> Further, from the logs it seems that cnxcc_set_max_channels is
> returning -1 and I have no idea why it is failing.
>
>
> On Sat, May 17, 2014 at 5:48 AM, Rahul MathuR <
> rahul.ultimate(a)gmail.com> wrote:
>
>> Hello Carlos,
>>
>> Many thanks for your help.
>> I followed the steps you mentioned for CNXCC. But even after making
>> the max. calls to 0, I am still able to connect the call. Below is the
>> excerpt from kamailio.cfg
>>
>> request_route {
>> setflag(DLG_FLAG);
>> # per request initial checks
>> route(REQINIT);
>> # NAT detection
>> route(NATDETECT);
>> .
>> .
>> .
>>
>> if (is_method("INVITE")) {
>> route(CNXCC);
>> }
>> }
>>
>> #Below lines added by Rahul for Concurrent Call Restriction
>> route[CNXCC]
>> {
>>
>> $var(client1) = "x.y.z.a";
>>
>> #!ifdef CNXCC_CHANNEL
>> xlog("L_INFO", "Setting up channel based credit
control");
>>
>> $var(max_chan1) = 0;
>> $var(retcode) = cnxcc_set_max_channels("$var(client1)",
>> "$var(max_chan)");
>>
>> if ($var(retcode) == -1) {
>> xlog("Error setting up credit control");
>> return;
>> }
>>
>> $var(count1) = -1;
>>
>> if (!cnxcc_get_channel_count("$rd", "$var(count1)"))
{
>> xlog("Error getting customer's channel count");
>> }
>> xlog("RAHUL : CNXCC ROUTE: $var(client) has $var(count)
>> call(s)");
>> xlog("L_INFO", "CNXCC ROUTE: $var(client) has $var(count)
>> call(s)");
>>
>> if ($var(count1) == $var(max_chan1)) {
>> xlog("Too many channels for customer");
>> sl_send_reply(403, "Forbidden");
>>
>> #if (!cnxcc_terminate_all("$var(client)")) {
>> # xlog("Error terminating customer's
calls");
>> #}
>>
>> exit;
>> }
>> #!endif
>>
>>
>> Could you please guide me where am I doing wrong ?
>>
>>
>> On Sat, May 17, 2014 at 3:01 AM, Carlos Ruiz Díaz <
>> carlos.ruizdiaz(a)gmail.com> wrote:
>>
>>> Any pseudo variable should work.
>>>
>>> I don't exactly know how your business work, but I'd suggest that
>>> instead of using from header domain, use the domain part of the
>>> request-uri, $rd.
>>>
>>> Regards,
>>> Carlos
>>>
>>>
>>> On Fri, May 16, 2014 at 4:28 PM, Rahul MathuR <
>>> rahul.ultimate(a)gmail.com> wrote:
>>>
>>>> Thank you very much Carlos !
>>>>
>>>> One last thing, can I use $fd in cnxcc_set_max_channels as below -
>>>> cnxcc_set_max_channels("$fd", "$var(max_chan)");
>>>> to restrict the simultaneous calls hitting a particular domain ?
>>>>
>>>>
>>>>
>>>>
>>>> On Sat, May 17, 2014 at 2:03 AM, Carlos Ruiz Díaz <
>>>> carlos.ruizdiaz(a)gmail.com> wrote:
>>>>
>>>>> Create a profile [1], and count the number of calls of that
>>>>> profile [2].
>>>>>
>>>>> Alternatively, you can use cnxcc module [3].
>>>>>
>>>>> [1]
>>>>>
http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1919576
>>>>> [2]
>>>>>
http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1964064
>>>>> [3]
>>>>> http://kamailio.org/docs/modules/stable/modules/cnxcc.html#idp132608
>>>>>
>>>>>
>>>>> On Fri, May 16, 2014 at 3:28 PM, Rahul MathuR <
>>>>> rahul.ultimate(a)gmail.com> wrote:
>>>>>
>>>>>> *Hello,*
>>>>>>
>>>>>> *Please accept my apologies for asking a simple question - Is
there any example which shows how can I create the dialog profile **value based on the SIP
domain or SIP Server IP (IP like- 112.23.134.5). I** need to control many SIP Server IPs
with limited channels to each with my** Kamailio Proxy.*
>>>>>>
>>>>>> *I am a newbie to kamailio world.*
>>>>>>
>>>>>>
>>>>>>
>>>>>> *-- Warm Regds.MathuRahul*
>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> sr-dev mailing list
>>>>>> sr-dev(a)lists.sip-router.org
>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Carlos
>>>>> http://caruizdiaz.com
>>>>> http://ngvoice.com
>>>>> +52 55 3048 3303
>>>>>
>>>>> _______________________________________________
>>>>> sr-dev mailing list
>>>>> sr-dev(a)lists.sip-router.org
>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Warm Regds.
>>>> MathuRahul
>>>>
>>>> _______________________________________________
>>>> sr-dev mailing list
>>>> sr-dev(a)lists.sip-router.org
>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>
>>>>
>>>
>>>
>>> --
>>> Carlos
>>> http://caruizdiaz.com
>>> http://ngvoice.com
>>> +52 55 3048 3303
>>>
>>> _______________________________________________
>>> sr-dev mailing list
>>> sr-dev(a)lists.sip-router.org
>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>
>>>
>>
>>
>> --
>> Warm Regds.
>> MathuRahul
>>
>
>
>
> --
> Warm Regds.
> MathuRahul
>
> _______________________________________________
> sr-dev mailing list
> sr-dev(a)lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>
>
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Warm Regds.
MathuRahul
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
5 Jun
5 Jun
11:16 a.m.
Hi Carlos,
Please find attached the configuration file which I am using.
Kindly refer route[CNXCC] where I have tried to put the channel limitation
per SIP Server.
Thanks !
On Wed, Jun 4, 2014 at 3:07 PM, Carlos Ruiz Díaz <carlos.ruizdiaz(a)gmail.com>
wrote:
Can you share your configuration file?
On Wed, Jun 4, 2014 at 1:03 AM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
--
Warm Regds.
MathuRahul
HI Carlos,
Thanks for reply.
In my case the key is SIP Server IP. My kamailio Proxy is connected to
many sip server IPs say 5. I want to limit maximum channels per sip server
ip. So I set max channels per sip server ip as
cnxcc_set_max_channels("$var(client1)", "$var(max_chan)"); and my
$var(client1) = "10.97.116.36"; is one of 5 sip servers connected to
Kamalio.
Now I use your cnxcc_get_channel_count("$rd", "$var(count1)"))
value(count1) to compare to the max_limit of the channels allowed for this
sip server. Psuedo Variable $rd is coming correctly that is same as sips
erver IP[$var(client1)].
But the problem is that cnxcc_get_channel_count("$rd",
"$var(count1)"))
is always setting the value 1 in $var(count1) variable even though there
are more calls runnning than what was set to be max_chan (which was 100 in
my case).
Any pointers to achieve this matter ?
On Tue, Jun 3, 2014 at 2:18 PM, Carlos Ruiz Díaz <
carlos.ruizdiaz(a)gmail.com> wrote:
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
Hi Rahul,
I don't understand your example. In that case, you are always using
"10.97.116.36"
as key, meaning that all calls will be hanging from same root.
If you want to use the request-uri domain part, use $rd, not the full
$ru. This will of course lead to 1 call being reported always, since
request-URIs tend to be different from each other.
Regards,
Carlos
On Tue, Jun 3, 2014 at 7:01 AM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
--
Warm Regds.
MathuRahul
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
Hi Carlos,
Sorry for coming late on this one.
the ruri value in my example is '10.97.116.36'
and i have tried to configure kamailio to only cater 100 simultaneous
calls on this SIP Server (10.97.116.36), after that it is to send 403.
Below is the sample logic from kamailio.cfg
***********************************************************************************************************************
#Below lines to show an example of how I am maintaining the business
for Concurrent Call Restriction
route[CNXCC]
{
$var(client1) = "10.97.116.36";
$var(max_chan) = 100;
#!ifdef CNXCC_CHANNEL
xlog("L_INFO", "Setting up channel based credit control");
$var(max_chan1) = 0;
$var(retcode) = cnxcc_set_max_channels("$var(client1)",
"$var(max_chan)");
if ($var(retcode) == -1) {
xlog("Error setting up credit control");
return;
}
$var(count1) = -1;
if (!cnxcc_get_channel_count("$rd", "$var(count1)")) {
xlog("Error getting customer's channel count");
}
xlog("RAHUL : CNXCC ROUTE: $var(client1) has $var(count1)
call(s)");
xlog("L_INFO", "CNXCC ROUTE: $var(client1) has $var(count1)
call(s)");
if ($var(count1) == $var(max_chan1)) {
xlog("Too many channels for customer");
sl_send_reply(403, "Forbidden");
exit;
}
#!endif
******************************************************************************************************************************************************
Now the problem that I am facing is that with multiple UACs (all with
same ruri - 10.97.116.36) dialing some pstn numbers, the value of "count1"
remains 1 for all cases. Hence, my purpose is defeated because the
restriction is not being laid and more than 'max_chan' no. of callers are
able to make the call.
Could you please help me achieve this goal.
Thanks !
On Sat, May 17, 2014 at 2:22 AM, Carlos Ruiz Díaz <
carlos.ruizdiaz(a)gmail.com> wrote:
> max_chan is equal to zero? You should put a positive value in here in
> order to make sense the function call.
>
> Also, you are using for one call the ID "x.y.z.a", and for the other
> one $rd. Both should be the same for calls that suppose to be organized in
> the same group.
>
> Please take a look at the docs.
>
>
> On Fri, May 16, 2014 at 7:52 PM, Rahul MathuR <
> rahul.ultimate(a)gmail.com> wrote:
>
>> Further, from the logs it seems that cnxcc_set_max_channels is
>> returning -1 and I have no idea why it is failing.
>>
>>
>> On Sat, May 17, 2014 at 5:48 AM, Rahul MathuR <
>> rahul.ultimate(a)gmail.com> wrote:
>>
>>> Hello Carlos,
>>>
>>> Many thanks for your help.
>>> I followed the steps you mentioned for CNXCC. But even after making
>>> the max. calls to 0, I am still able to connect the call. Below is the
>>> excerpt from kamailio.cfg
>>>
>>> request_route {
>>> setflag(DLG_FLAG);
>>> # per request initial checks
>>> route(REQINIT);
>>> # NAT detection
>>> route(NATDETECT);
>>> .
>>> .
>>> .
>>>
>>> if (is_method("INVITE")) {
>>> route(CNXCC);
>>> }
>>> }
>>>
>>> #Below lines added by Rahul for Concurrent Call Restriction
>>> route[CNXCC]
>>> {
>>>
>>> $var(client1) = "x.y.z.a";
>>>
>>> #!ifdef CNXCC_CHANNEL
>>> xlog("L_INFO", "Setting up channel based credit
control");
>>>
>>> $var(max_chan1) = 0;
>>> $var(retcode) = cnxcc_set_max_channels("$var(client1)",
>>> "$var(max_chan)");
>>>
>>> if ($var(retcode) == -1) {
>>> xlog("Error setting up credit control");
>>> return;
>>> }
>>>
>>> $var(count1) = -1;
>>>
>>> if (!cnxcc_get_channel_count("$rd",
"$var(count1)")) {
>>> xlog("Error getting customer's channel
count");
>>> }
>>> xlog("RAHUL : CNXCC ROUTE: $var(client) has $var(count)
>>> call(s)");
>>> xlog("L_INFO", "CNXCC ROUTE: $var(client) has
$var(count)
>>> call(s)");
>>>
>>> if ($var(count1) == $var(max_chan1)) {
>>> xlog("Too many channels for customer");
>>> sl_send_reply(403, "Forbidden");
>>>
>>> #if (!cnxcc_terminate_all("$var(client)")) {
>>> # xlog("Error terminating customer's
calls");
>>> #}
>>>
>>> exit;
>>> }
>>> #!endif
>>>
>>>
>>> Could you please guide me where am I doing wrong ?
>>>
>>>
>>> On Sat, May 17, 2014 at 3:01 AM, Carlos Ruiz Díaz <
>>> carlos.ruizdiaz(a)gmail.com> wrote:
>>>
>>>> Any pseudo variable should work.
>>>>
>>>> I don't exactly know how your business work, but I'd suggest
that
>>>> instead of using from header domain, use the domain part of the
>>>> request-uri, $rd.
>>>>
>>>> Regards,
>>>> Carlos
>>>>
>>>>
>>>> On Fri, May 16, 2014 at 4:28 PM, Rahul MathuR <
>>>> rahul.ultimate(a)gmail.com> wrote:
>>>>
>>>>> Thank you very much Carlos !
>>>>>
>>>>> One last thing, can I use $fd in cnxcc_set_max_channels as below
>>>>> -
>>>>> cnxcc_set_max_channels("$fd", "$var(max_chan)");
>>>>> to restrict the simultaneous calls hitting a particular domain ?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Sat, May 17, 2014 at 2:03 AM, Carlos Ruiz Díaz <
>>>>> carlos.ruizdiaz(a)gmail.com> wrote:
>>>>>
>>>>>> Create a profile [1], and count the number of calls of that
>>>>>> profile [2].
>>>>>>
>>>>>> Alternatively, you can use cnxcc module [3].
>>>>>>
>>>>>> [1]
>>>>>>
http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1919576
>>>>>> [2]
>>>>>>
http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1964064
>>>>>> [3]
>>>>>>
http://kamailio.org/docs/modules/stable/modules/cnxcc.html#idp132608
>>>>>>
>>>>>>
>>>>>> On Fri, May 16, 2014 at 3:28 PM, Rahul MathuR <
>>>>>> rahul.ultimate(a)gmail.com> wrote:
>>>>>>
>>>>>>> *Hello,*
>>>>>>>
>>>>>>> *Please accept my apologies for asking a simple question - Is
there any example which shows how can I create the dialog profile **value based on the SIP
domain or SIP Server IP (IP like- 112.23.134.5). I** need to control many SIP Server IPs
with limited channels to each with my** Kamailio Proxy.*
>>>>>>>
>>>>>>> *I am a newbie to kamailio world.*
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> *-- Warm Regds.MathuRahul*
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> sr-dev mailing list
>>>>>>> sr-dev(a)lists.sip-router.org
>>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Carlos
>>>>>> http://caruizdiaz.com
>>>>>> http://ngvoice.com
>>>>>> +52 55 3048 3303
>>>>>>
>>>>>> _______________________________________________
>>>>>> sr-dev mailing list
>>>>>> sr-dev(a)lists.sip-router.org
>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Warm Regds.
>>>>> MathuRahul
>>>>>
>>>>> _______________________________________________
>>>>> sr-dev mailing list
>>>>> sr-dev(a)lists.sip-router.org
>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Carlos
>>>> http://caruizdiaz.com
>>>> http://ngvoice.com
>>>> +52 55 3048 3303
>>>>
>>>> _______________________________________________
>>>> sr-dev mailing list
>>>> sr-dev(a)lists.sip-router.org
>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>
>>>>
>>>
>>>
>>> --
>>> Warm Regds.
>>> MathuRahul
>>>
>>
>>
>>
>> --
>> Warm Regds.
>> MathuRahul
>>
>> _______________________________________________
>> sr-dev mailing list
>> sr-dev(a)lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>
>>
>
>
> --
> Carlos
> http://caruizdiaz.com
> http://ngvoice.com
> +52 55 3048 3303
>
> _______________________________________________
> sr-dev mailing list
> sr-dev(a)lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>
>
--
Warm Regds.
MathuRahul
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
6 Jun
6 Jun
3:28 a.m.
Hello Carlos,
Did you get a chance to look at the attached configuration file ?
Warm Regds,
Rahul Mathur
On Thu, Jun 5, 2014 at 2:46 PM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
Hi Carlos,
Please find attached the configuration file which I am using.
Kindly refer route[CNXCC] where I have tried to put the channel limitation
per SIP Server.
Thanks !
On Wed, Jun 4, 2014 at 3:07 PM, Carlos Ruiz Díaz <
carlos.ruizdiaz(a)gmail.com> wrote:
--
Warm Regds.
MathuRahul
Can you share your configuration file?
On Wed, Jun 4, 2014 at 1:03 AM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
--
Warm Regds.
MathuRahul
HI Carlos,
Thanks for reply.
In my case the key is SIP Server IP. My kamailio Proxy is connected to
many sip server IPs say 5. I want to limit maximum channels per sip server
ip. So I set max channels per sip server ip as
cnxcc_set_max_channels("$var(client1)", "$var(max_chan)"); and my
$var(client1) = "10.97.116.36"; is one of 5 sip servers connected to
Kamalio.
Now I use your cnxcc_get_channel_count("$rd", "$var(count1)"))
value(count1) to compare to the max_limit of the channels allowed for this
sip server. Psuedo Variable $rd is coming correctly that is same as sips
erver IP[$var(client1)].
But the problem is that cnxcc_get_channel_count("$rd",
"$var(count1)"))
is always setting the value 1 in $var(count1) variable even though there
are more calls runnning than what was set to be max_chan (which was 100 in
my case).
Any pointers to achieve this matter ?
On Tue, Jun 3, 2014 at 2:18 PM, Carlos Ruiz Díaz <
carlos.ruizdiaz(a)gmail.com> wrote:
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
Hi Rahul,
I don't understand your example. In that case, you are always using
"10.97.116.36"
as key, meaning that all calls will be hanging from same root.
If you want to use the request-uri domain part, use $rd, not the full
$ru. This will of course lead to 1 call being reported always, since
request-URIs tend to be different from each other.
Regards,
Carlos
On Tue, Jun 3, 2014 at 7:01 AM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
> Hi Carlos,
>
> Sorry for coming late on this one.
>
> the ruri value in my example is '10.97.116.36'
> and i have tried to configure kamailio to only cater 100 simultaneous
> calls on this SIP Server (10.97.116.36), after that it is to send 403.
>
> Below is the sample logic from kamailio.cfg
>
>
***********************************************************************************************************************
> #Below lines to show an example of how I am maintaining the business
> for Concurrent Call Restriction
> route[CNXCC]
> {
>
> $var(client1) = "10.97.116.36";
> $var(max_chan) = 100;
> #!ifdef CNXCC_CHANNEL
> xlog("L_INFO", "Setting up channel based credit
control");
>
> $var(max_chan1) = 0;
> $var(retcode) = cnxcc_set_max_channels("$var(client1)",
> "$var(max_chan)");
>
> if ($var(retcode) == -1) {
> xlog("Error setting up credit control");
> return;
> }
>
> $var(count1) = -1;
>
> if (!cnxcc_get_channel_count("$rd", "$var(count1)")) {
> xlog("Error getting customer's channel count");
> }
> xlog("RAHUL : CNXCC ROUTE: $var(client1) has $var(count1)
> call(s)");
> xlog("L_INFO", "CNXCC ROUTE: $var(client1) has $var(count1)
> call(s)");
>
>
> if ($var(count1) == $var(max_chan1)) {
> xlog("Too many channels for customer");
> sl_send_reply(403, "Forbidden");
>
> exit;
> }
> #!endif
>
>
******************************************************************************************************************************************************
>
> Now the problem that I am facing is that with multiple UACs (all with
> same ruri - 10.97.116.36) dialing some pstn numbers, the value of "count1"
> remains 1 for all cases. Hence, my purpose is defeated because the
> restriction is not being laid and more than 'max_chan' no. of callers are
> able to make the call.
>
> Could you please help me achieve this goal.
>
> Thanks !
>
>
>
> On Sat, May 17, 2014 at 2:22 AM, Carlos Ruiz Díaz <
> carlos.ruizdiaz(a)gmail.com> wrote:
>
>> max_chan is equal to zero? You should put a positive value in here in
>> order to make sense the function call.
>>
>> Also, you are using for one call the ID "x.y.z.a", and for the other
>> one $rd. Both should be the same for calls that suppose to be organized in
>> the same group.
>>
>> Please take a look at the docs.
>>
>>
>> On Fri, May 16, 2014 at 7:52 PM, Rahul MathuR <
>> rahul.ultimate(a)gmail.com> wrote:
>>
>>> Further, from the logs it seems that cnxcc_set_max_channels is
>>> returning -1 and I have no idea why it is failing.
>>>
>>>
>>> On Sat, May 17, 2014 at 5:48 AM, Rahul MathuR <
>>> rahul.ultimate(a)gmail.com> wrote:
>>>
>>>> Hello Carlos,
>>>>
>>>> Many thanks for your help.
>>>> I followed the steps you mentioned for CNXCC. But even after making
>>>> the max. calls to 0, I am still able to connect the call. Below is the
>>>> excerpt from kamailio.cfg
>>>>
>>>> request_route {
>>>> setflag(DLG_FLAG);
>>>> # per request initial checks
>>>> route(REQINIT);
>>>> # NAT detection
>>>> route(NATDETECT);
>>>> .
>>>> .
>>>> .
>>>>
>>>> if (is_method("INVITE")) {
>>>> route(CNXCC);
>>>> }
>>>> }
>>>>
>>>> #Below lines added by Rahul for Concurrent Call Restriction
>>>> route[CNXCC]
>>>> {
>>>>
>>>> $var(client1) = "x.y.z.a";
>>>>
>>>> #!ifdef CNXCC_CHANNEL
>>>> xlog("L_INFO", "Setting up channel based credit
control");
>>>>
>>>> $var(max_chan1) = 0;
>>>> $var(retcode) =
cnxcc_set_max_channels("$var(client1)",
>>>> "$var(max_chan)");
>>>>
>>>> if ($var(retcode) == -1) {
>>>> xlog("Error setting up credit control");
>>>> return;
>>>> }
>>>>
>>>> $var(count1) = -1;
>>>>
>>>> if (!cnxcc_get_channel_count("$rd",
"$var(count1)")) {
>>>> xlog("Error getting customer's channel
count");
>>>> }
>>>> xlog("RAHUL : CNXCC ROUTE: $var(client) has $var(count)
>>>> call(s)");
>>>> xlog("L_INFO", "CNXCC ROUTE: $var(client) has
$var(count)
>>>> call(s)");
>>>>
>>>> if ($var(count1) == $var(max_chan1)) {
>>>> xlog("Too many channels for customer");
>>>> sl_send_reply(403, "Forbidden");
>>>>
>>>> #if (!cnxcc_terminate_all("$var(client)")) {
>>>> # xlog("Error terminating customer's
calls");
>>>> #}
>>>>
>>>> exit;
>>>> }
>>>> #!endif
>>>>
>>>>
>>>> Could you please guide me where am I doing wrong ?
>>>>
>>>>
>>>> On Sat, May 17, 2014 at 3:01 AM, Carlos Ruiz Díaz <
>>>> carlos.ruizdiaz(a)gmail.com> wrote:
>>>>
>>>>> Any pseudo variable should work.
>>>>>
>>>>> I don't exactly know how your business work, but I'd suggest
that
>>>>> instead of using from header domain, use the domain part of the
>>>>> request-uri, $rd.
>>>>>
>>>>> Regards,
>>>>> Carlos
>>>>>
>>>>>
>>>>> On Fri, May 16, 2014 at 4:28 PM, Rahul MathuR <
>>>>> rahul.ultimate(a)gmail.com> wrote:
>>>>>
>>>>>> Thank you very much Carlos !
>>>>>>
>>>>>> One last thing, can I use $fd in cnxcc_set_max_channels as below
>>>>>> -
>>>>>> cnxcc_set_max_channels("$fd",
"$var(max_chan)");
>>>>>> to restrict the simultaneous calls hitting a particular domain ?
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Sat, May 17, 2014 at 2:03 AM, Carlos Ruiz Díaz <
>>>>>> carlos.ruizdiaz(a)gmail.com> wrote:
>>>>>>
>>>>>>> Create a profile [1], and count the number of calls of that
>>>>>>> profile [2].
>>>>>>>
>>>>>>> Alternatively, you can use cnxcc module [3].
>>>>>>>
>>>>>>> [1]
>>>>>>>
http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1919576
>>>>>>> [2]
>>>>>>>
http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1964064
>>>>>>> [3]
>>>>>>>
http://kamailio.org/docs/modules/stable/modules/cnxcc.html#idp132608
>>>>>>>
>>>>>>>
>>>>>>> On Fri, May 16, 2014 at 3:28 PM, Rahul MathuR <
>>>>>>> rahul.ultimate(a)gmail.com> wrote:
>>>>>>>
>>>>>>>> *Hello,*
>>>>>>>>
>>>>>>>> *Please accept my apologies for asking a simple question
- Is there any example which shows how can I create the dialog profile **value based on
the SIP domain or SIP Server IP (IP like- 112.23.134.5). I** need to control many SIP
Server IPs with limited channels to each with my** Kamailio Proxy.*
>>>>>>>>
>>>>>>>> *I am a newbie to kamailio world.*
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> *-- Warm Regds.MathuRahul*
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> sr-dev mailing list
>>>>>>>> sr-dev(a)lists.sip-router.org
>>>>>>>>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Carlos
>>>>>>> http://caruizdiaz.com
>>>>>>> http://ngvoice.com
>>>>>>> +52 55 3048 3303
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> sr-dev mailing list
>>>>>>> sr-dev(a)lists.sip-router.org
>>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Warm Regds.
>>>>>> MathuRahul
>>>>>>
>>>>>> _______________________________________________
>>>>>> sr-dev mailing list
>>>>>> sr-dev(a)lists.sip-router.org
>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Carlos
>>>>> http://caruizdiaz.com
>>>>> http://ngvoice.com
>>>>> +52 55 3048 3303
>>>>>
>>>>> _______________________________________________
>>>>> sr-dev mailing list
>>>>> sr-dev(a)lists.sip-router.org
>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Warm Regds.
>>>> MathuRahul
>>>>
>>>
>>>
>>>
>>> --
>>> Warm Regds.
>>> MathuRahul
>>>
>>> _______________________________________________
>>> sr-dev mailing list
>>> sr-dev(a)lists.sip-router.org
>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>
>>>
>>
>>
>> --
>> Carlos
>> http://caruizdiaz.com
>> http://ngvoice.com
>> +52 55 3048 3303
>>
>> _______________________________________________
>> sr-dev mailing list
>> sr-dev(a)lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>
>>
>
>
> --
> Warm Regds.
> MathuRahul
>
> _______________________________________________
> sr-dev mailing list
> sr-dev(a)lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>
>
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Warm Regds.
MathuRahul
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
6:04 a.m.
Hi Rahul,
sorry, I couldn't find time to do it. I will take a look tomorrow, or most
possibly during the weekend.
Regards,
Carlos
On Thu, Jun 5, 2014 at 8:28 PM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
Hello Carlos,
Did you get a chance to look at the attached configuration file ?
Warm Regds,
Rahul Mathur
On Thu, Jun 5, 2014 at 2:46 PM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
Hi Carlos,
Please find attached the configuration file which I am using.
Kindly refer route[CNXCC] where I have tried to put the channel
limitation per SIP Server.
Thanks !
On Wed, Jun 4, 2014 at 3:07 PM, Carlos Ruiz Díaz <
carlos.ruizdiaz(a)gmail.com> wrote:
--
Warm Regds.
MathuRahul
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
Can you share your configuration file?
On Wed, Jun 4, 2014 at 1:03 AM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
--
Warm Regds.
MathuRahul
HI Carlos,
Thanks for reply.
In my case the key is SIP Server IP. My kamailio Proxy is connected to
many sip server IPs say 5. I want to limit maximum channels per sip server
ip. So I set max channels per sip server ip as
cnxcc_set_max_channels("$var(client1)", "$var(max_chan)"); and my
$var(client1) = "10.97.116.36"; is one of 5 sip servers connected to
Kamalio.
Now I use your cnxcc_get_channel_count("$rd", "$var(count1)"))
value(count1) to compare to the max_limit of the channels allowed for this
sip server. Psuedo Variable $rd is coming correctly that is same as sips
erver IP[$var(client1)].
But the problem is that cnxcc_get_channel_count("$rd",
"$var(count1)")) is always setting the value 1 in $var(count1) variable
even though there are more calls runnning than what was set to be max_chan
(which was 100 in my case).
Any pointers to achieve this matter ?
On Tue, Jun 3, 2014 at 2:18 PM, Carlos Ruiz Díaz <
carlos.ruizdiaz(a)gmail.com> wrote:
> Hi Rahul,
>
> I don't understand your example. In that case, you are always using
"10.97.116.36"
> as key, meaning that all calls will be hanging from same root.
>
> If you want to use the request-uri domain part, use $rd, not the full
> $ru. This will of course lead to 1 call being reported always, since
> request-URIs tend to be different from each other.
>
> Regards,
> Carlos
>
>
>
>
> On Tue, Jun 3, 2014 at 7:01 AM, Rahul MathuR <rahul.ultimate(a)gmail.com
> > wrote:
>
>> Hi Carlos,
>>
>> Sorry for coming late on this one.
>>
>> the ruri value in my example is '10.97.116.36'
>> and i have tried to configure kamailio to only cater 100 simultaneous
>> calls on this SIP Server (10.97.116.36), after that it is to send 403.
>>
>> Below is the sample logic from kamailio.cfg
>>
>>
***********************************************************************************************************************
>> #Below lines to show an example of how I am maintaining the
>> business for Concurrent Call Restriction
>> route[CNXCC]
>> {
>>
>> $var(client1) = "10.97.116.36";
>> $var(max_chan) = 100;
>> #!ifdef CNXCC_CHANNEL
>> xlog("L_INFO", "Setting up channel based credit
control");
>>
>> $var(max_chan1) = 0;
>> $var(retcode) = cnxcc_set_max_channels("$var(client1)",
>> "$var(max_chan)");
>>
>> if ($var(retcode) == -1) {
>> xlog("Error setting up credit control");
>> return;
>> }
>>
>> $var(count1) = -1;
>>
>> if (!cnxcc_get_channel_count("$rd",
"$var(count1)")) {
>> xlog("Error getting customer's channel count");
>> }
>> xlog("RAHUL : CNXCC ROUTE: $var(client1) has $var(count1)
>> call(s)");
>> xlog("L_INFO", "CNXCC ROUTE: $var(client1) has
>> $var(count1) call(s)");
>>
>>
>> if ($var(count1) == $var(max_chan1)) {
>> xlog("Too many channels for customer");
>> sl_send_reply(403, "Forbidden");
>>
>> exit;
>> }
>> #!endif
>>
>>
******************************************************************************************************************************************************
>>
>> Now the problem that I am facing is that with multiple UACs (all with
>> same ruri - 10.97.116.36) dialing some pstn numbers, the value of
"count1"
>> remains 1 for all cases. Hence, my purpose is defeated because the
>> restriction is not being laid and more than 'max_chan' no. of callers
are
>> able to make the call.
>>
>> Could you please help me achieve this goal.
>>
>> Thanks !
>>
>>
>>
>> On Sat, May 17, 2014 at 2:22 AM, Carlos Ruiz Díaz <
>> carlos.ruizdiaz(a)gmail.com> wrote:
>>
>>> max_chan is equal to zero? You should put a positive value in here
>>> in order to make sense the function call.
>>>
>>> Also, you are using for one call the ID "x.y.z.a", and for the
other
>>> one $rd. Both should be the same for calls that suppose to be organized in
>>> the same group.
>>>
>>> Please take a look at the docs.
>>>
>>>
>>> On Fri, May 16, 2014 at 7:52 PM, Rahul MathuR <
>>> rahul.ultimate(a)gmail.com> wrote:
>>>
>>>> Further, from the logs it seems that cnxcc_set_max_channels is
>>>> returning -1 and I have no idea why it is failing.
>>>>
>>>>
>>>> On Sat, May 17, 2014 at 5:48 AM, Rahul MathuR <
>>>> rahul.ultimate(a)gmail.com> wrote:
>>>>
>>>>> Hello Carlos,
>>>>>
>>>>> Many thanks for your help.
>>>>> I followed the steps you mentioned for CNXCC. But even after
>>>>> making the max. calls to 0, I am still able to connect the call.
Below is
>>>>> the excerpt from kamailio.cfg
>>>>>
>>>>> request_route {
>>>>> setflag(DLG_FLAG);
>>>>> # per request initial checks
>>>>> route(REQINIT);
>>>>> # NAT detection
>>>>> route(NATDETECT);
>>>>> .
>>>>> .
>>>>> .
>>>>>
>>>>> if (is_method("INVITE")) {
>>>>> route(CNXCC);
>>>>> }
>>>>> }
>>>>>
>>>>> #Below lines added by Rahul for Concurrent Call Restriction
>>>>> route[CNXCC]
>>>>> {
>>>>>
>>>>> $var(client1) = "x.y.z.a";
>>>>>
>>>>> #!ifdef CNXCC_CHANNEL
>>>>> xlog("L_INFO", "Setting up channel based
credit control");
>>>>>
>>>>> $var(max_chan1) = 0;
>>>>> $var(retcode) =
cnxcc_set_max_channels("$var(client1)",
>>>>> "$var(max_chan)");
>>>>>
>>>>> if ($var(retcode) == -1) {
>>>>> xlog("Error setting up credit control");
>>>>> return;
>>>>> }
>>>>>
>>>>> $var(count1) = -1;
>>>>>
>>>>> if (!cnxcc_get_channel_count("$rd",
"$var(count1)")) {
>>>>> xlog("Error getting customer's channel
count");
>>>>> }
>>>>> xlog("RAHUL : CNXCC ROUTE: $var(client) has $var(count)
>>>>> call(s)");
>>>>> xlog("L_INFO", "CNXCC ROUTE: $var(client) has
$var(count)
>>>>> call(s)");
>>>>>
>>>>> if ($var(count1) == $var(max_chan1)) {
>>>>> xlog("Too many channels for customer");
>>>>> sl_send_reply(403, "Forbidden");
>>>>>
>>>>> #if (!cnxcc_terminate_all("$var(client)"))
{
>>>>> # xlog("Error terminating customer's
calls");
>>>>> #}
>>>>>
>>>>> exit;
>>>>> }
>>>>> #!endif
>>>>>
>>>>>
>>>>> Could you please guide me where am I doing wrong ?
>>>>>
>>>>>
>>>>> On Sat, May 17, 2014 at 3:01 AM, Carlos Ruiz Díaz <
>>>>> carlos.ruizdiaz(a)gmail.com> wrote:
>>>>>
>>>>>> Any pseudo variable should work.
>>>>>>
>>>>>> I don't exactly know how your business work, but I'd
suggest that
>>>>>> instead of using from header domain, use the domain part of the
>>>>>> request-uri, $rd.
>>>>>>
>>>>>> Regards,
>>>>>> Carlos
>>>>>>
>>>>>>
>>>>>> On Fri, May 16, 2014 at 4:28 PM, Rahul MathuR <
>>>>>> rahul.ultimate(a)gmail.com> wrote:
>>>>>>
>>>>>>> Thank you very much Carlos !
>>>>>>>
>>>>>>> One last thing, can I use $fd in cnxcc_set_max_channels as
>>>>>>> below -
>>>>>>> cnxcc_set_max_channels("$fd",
"$var(max_chan)");
>>>>>>> to restrict the simultaneous calls hitting a particular
domain ?
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Sat, May 17, 2014 at 2:03 AM, Carlos Ruiz Díaz <
>>>>>>> carlos.ruizdiaz(a)gmail.com> wrote:
>>>>>>>
>>>>>>>> Create a profile [1], and count the number of calls of
that
>>>>>>>> profile [2].
>>>>>>>>
>>>>>>>> Alternatively, you can use cnxcc module [3].
>>>>>>>>
>>>>>>>> [1]
>>>>>>>>
http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1919576
>>>>>>>> [2]
>>>>>>>>
http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1964064
>>>>>>>> [3]
>>>>>>>>
http://kamailio.org/docs/modules/stable/modules/cnxcc.html#idp132608
>>>>>>>>
>>>>>>>>
>>>>>>>> On Fri, May 16, 2014 at 3:28 PM, Rahul MathuR <
>>>>>>>> rahul.ultimate(a)gmail.com> wrote:
>>>>>>>>
>>>>>>>>> *Hello,*
>>>>>>>>>
>>>>>>>>> *Please accept my apologies for asking a simple
question - Is there any example which shows how can I create the dialog profile **value
based on the SIP domain or SIP Server IP (IP like- 112.23.134.5). I** need to control many
SIP Server IPs with limited channels to each with my** Kamailio Proxy.*
>>>>>>>>>
>>>>>>>>> *I am a newbie to kamailio world.*
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> *-- Warm Regds.MathuRahul*
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> sr-dev mailing list
>>>>>>>>> sr-dev(a)lists.sip-router.org
>>>>>>>>>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Carlos
>>>>>>>> http://caruizdiaz.com
>>>>>>>> http://ngvoice.com
>>>>>>>> +52 55 3048 3303
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> sr-dev mailing list
>>>>>>>> sr-dev(a)lists.sip-router.org
>>>>>>>>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Warm Regds.
>>>>>>> MathuRahul
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> sr-dev mailing list
>>>>>>> sr-dev(a)lists.sip-router.org
>>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Carlos
>>>>>> http://caruizdiaz.com
>>>>>> http://ngvoice.com
>>>>>> +52 55 3048 3303
>>>>>>
>>>>>> _______________________________________________
>>>>>> sr-dev mailing list
>>>>>> sr-dev(a)lists.sip-router.org
>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Warm Regds.
>>>>> MathuRahul
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Warm Regds.
>>>> MathuRahul
>>>>
>>>> _______________________________________________
>>>> sr-dev mailing list
>>>> sr-dev(a)lists.sip-router.org
>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>
>>>>
>>>
>>>
>>> --
>>> Carlos
>>> http://caruizdiaz.com
>>> http://ngvoice.com
>>> +52 55 3048 3303
>>>
>>> _______________________________________________
>>> sr-dev mailing list
>>> sr-dev(a)lists.sip-router.org
>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>
>>>
>>
>>
>> --
>> Warm Regds.
>> MathuRahul
>>
>> _______________________________________________
>> sr-dev mailing list
>> sr-dev(a)lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>
>>
>
>
> --
> Carlos
> http://caruizdiaz.com
> http://ngvoice.com
> +52 55 3048 3303
>
> _______________________________________________
> sr-dev mailing list
> sr-dev(a)lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>
>
--
Warm Regds.
MathuRahul
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
9 Jun
9 Jun
1:55 p.m.
Hello Carlos,
Were you able to look at my configuration file ?
Thanks !
On Fri, Jun 6, 2014 at 5:04 AM, Carlos Ruiz Díaz <carlos.ruizdiaz(a)gmail.com>
wrote:
Hi Rahul,
sorry, I couldn't find time to do it. I will take a look tomorrow, or most
possibly during the weekend.
Regards,
Carlos
On Thu, Jun 5, 2014 at 8:28 PM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
--
Warm Regds.
MathuRahul
Hello Carlos,
Did you get a chance to look at the attached configuration file ?
Warm Regds,
Rahul Mathur
On Thu, Jun 5, 2014 at 2:46 PM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
Hi Carlos,
Please find attached the configuration file which I am using.
Kindly refer route[CNXCC] where I have tried to put the channel
limitation per SIP Server.
Thanks !
On Wed, Jun 4, 2014 at 3:07 PM, Carlos Ruiz Díaz <
carlos.ruizdiaz(a)gmail.com> wrote:
--
Warm Regds.
MathuRahul
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
Can you share your configuration file?
On Wed, Jun 4, 2014 at 1:03 AM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
> HI Carlos,
>
> Thanks for reply.
>
> In my case the key is SIP Server IP. My kamailio Proxy is connected to
> many sip server IPs say 5. I want to limit maximum channels per sip server
> ip. So I set max channels per sip server ip as
> cnxcc_set_max_channels("$var(client1)", "$var(max_chan)"); and
my
> $var(client1) = "10.97.116.36"; is one of 5 sip servers connected to
> Kamalio.
>
> Now I use your cnxcc_get_channel_count("$rd", "$var(count1)"))
> value(count1) to compare to the max_limit of the channels allowed for this
> sip server. Psuedo Variable $rd is coming correctly that is same as sips
> erver IP[$var(client1)].
> But the problem is that cnxcc_get_channel_count("$rd",
> "$var(count1)")) is always setting the value 1 in $var(count1) variable
> even though there are more calls runnning than what was set to be max_chan
> (which was 100 in my case).
>
> Any pointers to achieve this matter ?
>
>
>
>
>
> On Tue, Jun 3, 2014 at 2:18 PM, Carlos Ruiz Díaz <
> carlos.ruizdiaz(a)gmail.com> wrote:
>
>> Hi Rahul,
>>
>> I don't understand your example. In that case, you are always using
"10.97.116.36"
>> as key, meaning that all calls will be hanging from same root.
>>
>> If you want to use the request-uri domain part, use $rd, not the full
>> $ru. This will of course lead to 1 call being reported always, since
>> request-URIs tend to be different from each other.
>>
>> Regards,
>> Carlos
>>
>>
>>
>>
>> On Tue, Jun 3, 2014 at 7:01 AM, Rahul MathuR <
>> rahul.ultimate(a)gmail.com> wrote:
>>
>>> Hi Carlos,
>>>
>>> Sorry for coming late on this one.
>>>
>>> the ruri value in my example is '10.97.116.36'
>>> and i have tried to configure kamailio to only cater 100
>>> simultaneous calls on this SIP Server (10.97.116.36), after that it is to
>>> send 403.
>>>
>>> Below is the sample logic from kamailio.cfg
>>>
>>>
***********************************************************************************************************************
>>> #Below lines to show an example of how I am maintaining the
>>> business for Concurrent Call Restriction
>>> route[CNXCC]
>>> {
>>>
>>> $var(client1) = "10.97.116.36";
>>> $var(max_chan) = 100;
>>> #!ifdef CNXCC_CHANNEL
>>> xlog("L_INFO", "Setting up channel based credit
control");
>>>
>>> $var(max_chan1) = 0;
>>> $var(retcode) =
cnxcc_set_max_channels("$var(client1)",
>>> "$var(max_chan)");
>>>
>>> if ($var(retcode) == -1) {
>>> xlog("Error setting up credit control");
>>> return;
>>> }
>>>
>>> $var(count1) = -1;
>>>
>>> if (!cnxcc_get_channel_count("$rd",
"$var(count1)")) {
>>> xlog("Error getting customer's channel
count");
>>> }
>>> xlog("RAHUL : CNXCC ROUTE: $var(client1) has $var(count1)
>>> call(s)");
>>> xlog("L_INFO", "CNXCC ROUTE: $var(client1) has
>>> $var(count1) call(s)");
>>>
>>>
>>> if ($var(count1) == $var(max_chan1)) {
>>> xlog("Too many channels for customer");
>>> sl_send_reply(403, "Forbidden");
>>>
>>> exit;
>>> }
>>> #!endif
>>>
>>>
******************************************************************************************************************************************************
>>>
>>> Now the problem that I am facing is that with multiple UACs (all
>>> with same ruri - 10.97.116.36) dialing some pstn numbers, the value of
>>> "count1" remains 1 for all cases. Hence, my purpose is defeated
because the
>>> restriction is not being laid and more than 'max_chan' no. of callers
are
>>> able to make the call.
>>>
>>> Could you please help me achieve this goal.
>>>
>>> Thanks !
>>>
>>>
>>>
>>> On Sat, May 17, 2014 at 2:22 AM, Carlos Ruiz Díaz <
>>> carlos.ruizdiaz(a)gmail.com> wrote:
>>>
>>>> max_chan is equal to zero? You should put a positive value in here
>>>> in order to make sense the function call.
>>>>
>>>> Also, you are using for one call the ID "x.y.z.a", and for the
>>>> other one $rd. Both should be the same for calls that suppose to be
>>>> organized in the same group.
>>>>
>>>> Please take a look at the docs.
>>>>
>>>>
>>>> On Fri, May 16, 2014 at 7:52 PM, Rahul MathuR <
>>>> rahul.ultimate(a)gmail.com> wrote:
>>>>
>>>>> Further, from the logs it seems that cnxcc_set_max_channels is
>>>>> returning -1 and I have no idea why it is failing.
>>>>>
>>>>>
>>>>> On Sat, May 17, 2014 at 5:48 AM, Rahul MathuR <
>>>>> rahul.ultimate(a)gmail.com> wrote:
>>>>>
>>>>>> Hello Carlos,
>>>>>>
>>>>>> Many thanks for your help.
>>>>>> I followed the steps you mentioned for CNXCC. But even after
>>>>>> making the max. calls to 0, I am still able to connect the call.
Below is
>>>>>> the excerpt from kamailio.cfg
>>>>>>
>>>>>> request_route {
>>>>>> setflag(DLG_FLAG);
>>>>>> # per request initial checks
>>>>>> route(REQINIT);
>>>>>> # NAT detection
>>>>>> route(NATDETECT);
>>>>>> .
>>>>>> .
>>>>>> .
>>>>>>
>>>>>> if (is_method("INVITE")) {
>>>>>> route(CNXCC);
>>>>>> }
>>>>>> }
>>>>>>
>>>>>> #Below lines added by Rahul for Concurrent Call Restriction
>>>>>> route[CNXCC]
>>>>>> {
>>>>>>
>>>>>> $var(client1) = "x.y.z.a";
>>>>>>
>>>>>> #!ifdef CNXCC_CHANNEL
>>>>>> xlog("L_INFO", "Setting up channel based
credit control");
>>>>>>
>>>>>> $var(max_chan1) = 0;
>>>>>> $var(retcode) =
cnxcc_set_max_channels("$var(client1)",
>>>>>> "$var(max_chan)");
>>>>>>
>>>>>> if ($var(retcode) == -1) {
>>>>>> xlog("Error setting up credit
control");
>>>>>> return;
>>>>>> }
>>>>>>
>>>>>> $var(count1) = -1;
>>>>>>
>>>>>> if (!cnxcc_get_channel_count("$rd",
"$var(count1)")) {
>>>>>> xlog("Error getting customer's channel
count");
>>>>>> }
>>>>>> xlog("RAHUL : CNXCC ROUTE: $var(client) has
$var(count)
>>>>>> call(s)");
>>>>>> xlog("L_INFO", "CNXCC ROUTE: $var(client)
has $var(count)
>>>>>> call(s)");
>>>>>>
>>>>>> if ($var(count1) == $var(max_chan1)) {
>>>>>> xlog("Too many channels for
customer");
>>>>>> sl_send_reply(403, "Forbidden");
>>>>>>
>>>>>> #if
(!cnxcc_terminate_all("$var(client)")) {
>>>>>> # xlog("Error terminating
customer's
>>>>>> calls");
>>>>>> #}
>>>>>>
>>>>>> exit;
>>>>>> }
>>>>>> #!endif
>>>>>>
>>>>>>
>>>>>> Could you please guide me where am I doing wrong ?
>>>>>>
>>>>>>
>>>>>> On Sat, May 17, 2014 at 3:01 AM, Carlos Ruiz Díaz <
>>>>>> carlos.ruizdiaz(a)gmail.com> wrote:
>>>>>>
>>>>>>> Any pseudo variable should work.
>>>>>>>
>>>>>>> I don't exactly know how your business work, but I'd
suggest
>>>>>>> that instead of using from header domain, use the domain part
of the
>>>>>>> request-uri, $rd.
>>>>>>>
>>>>>>> Regards,
>>>>>>> Carlos
>>>>>>>
>>>>>>>
>>>>>>> On Fri, May 16, 2014 at 4:28 PM, Rahul MathuR <
>>>>>>> rahul.ultimate(a)gmail.com> wrote:
>>>>>>>
>>>>>>>> Thank you very much Carlos !
>>>>>>>>
>>>>>>>> One last thing, can I use $fd in cnxcc_set_max_channels
as
>>>>>>>> below -
>>>>>>>> cnxcc_set_max_channels("$fd",
"$var(max_chan)");
>>>>>>>> to restrict the simultaneous calls hitting a particular
domain ?
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Sat, May 17, 2014 at 2:03 AM, Carlos Ruiz Díaz <
>>>>>>>> carlos.ruizdiaz(a)gmail.com> wrote:
>>>>>>>>
>>>>>>>>> Create a profile [1], and count the number of calls
of that
>>>>>>>>> profile [2].
>>>>>>>>>
>>>>>>>>> Alternatively, you can use cnxcc module [3].
>>>>>>>>>
>>>>>>>>> [1]
>>>>>>>>>
http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1919576
>>>>>>>>> [2]
>>>>>>>>>
http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1964064
>>>>>>>>> [3]
>>>>>>>>>
http://kamailio.org/docs/modules/stable/modules/cnxcc.html#idp132608
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Fri, May 16, 2014 at 3:28 PM, Rahul MathuR <
>>>>>>>>> rahul.ultimate(a)gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> *Hello,*
>>>>>>>>>>
>>>>>>>>>> *Please accept my apologies for asking a simple
question - Is there any example which shows how can I create the dialog profile **value
based on the SIP domain or SIP Server IP (IP like- 112.23.134.5). I** need to control many
SIP Server IPs with limited channels to each with my** Kamailio Proxy.*
>>>>>>>>>>
>>>>>>>>>> *I am a newbie to kamailio world.*
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> *-- Warm Regds.MathuRahul*
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> sr-dev mailing list
>>>>>>>>>> sr-dev(a)lists.sip-router.org
>>>>>>>>>>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Carlos
>>>>>>>>> http://caruizdiaz.com
>>>>>>>>> http://ngvoice.com
>>>>>>>>> +52 55 3048 3303
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> sr-dev mailing list
>>>>>>>>> sr-dev(a)lists.sip-router.org
>>>>>>>>>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Warm Regds.
>>>>>>>> MathuRahul
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> sr-dev mailing list
>>>>>>>> sr-dev(a)lists.sip-router.org
>>>>>>>>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Carlos
>>>>>>> http://caruizdiaz.com
>>>>>>> http://ngvoice.com
>>>>>>> +52 55 3048 3303
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> sr-dev mailing list
>>>>>>> sr-dev(a)lists.sip-router.org
>>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Warm Regds.
>>>>>> MathuRahul
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Warm Regds.
>>>>> MathuRahul
>>>>>
>>>>> _______________________________________________
>>>>> sr-dev mailing list
>>>>> sr-dev(a)lists.sip-router.org
>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Carlos
>>>> http://caruizdiaz.com
>>>> http://ngvoice.com
>>>> +52 55 3048 3303
>>>>
>>>> _______________________________________________
>>>> sr-dev mailing list
>>>> sr-dev(a)lists.sip-router.org
>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>
>>>>
>>>
>>>
>>> --
>>> Warm Regds.
>>> MathuRahul
>>>
>>> _______________________________________________
>>> sr-dev mailing list
>>> sr-dev(a)lists.sip-router.org
>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>
>>>
>>
>>
>> --
>> Carlos
>> http://caruizdiaz.com
>> http://ngvoice.com
>> +52 55 3048 3303
>>
>> _______________________________________________
>> sr-dev mailing list
>> sr-dev(a)lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>
>>
>
>
> --
> Warm Regds.
> MathuRahul
>
> _______________________________________________
> sr-dev mailing list
> sr-dev(a)lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>
>
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Warm Regds.
MathuRahul
4:54 p.m.
Hi Rahul,
*if($var(client1)!="null") *should be *if($var(client1)!="$null").
*You are
doing a string comparison with the string value "*null*".
Also make sure the dialog matching is correct: append these event routes to
your config file:
*event_route[dialog:start] {*
* xlog("Dialog started");*
*}*
*event_route[dialog:end] {*
* xlog("Dialog ended");*
*}*
*event_route[dialog:failed] {*
* xlog("Dialog failed");*
*}*
You should see a "dialog started" and "dialog ended" for every
successful
call.
Please do those modifications and see what happens.
Regards,
Carlos
On Mon, Jun 9, 2014 at 6:55 AM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
Hello Carlos,
Were you able to look at my configuration file ?
Thanks !
On Fri, Jun 6, 2014 at 5:04 AM, Carlos Ruiz Díaz <
carlos.ruizdiaz(a)gmail.com> wrote:
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
Hi Rahul,
sorry, I couldn't find time to do it. I will take a look tomorrow, or
most possibly during the weekend.
Regards,
Carlos
On Thu, Jun 5, 2014 at 8:28 PM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
--
Warm Regds.
MathuRahul
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
Hello Carlos,
Did you get a chance to look at the attached configuration file ?
Warm Regds,
Rahul Mathur
On Thu, Jun 5, 2014 at 2:46 PM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
Hi Carlos,
Please find attached the configuration file which I am using.
Kindly refer route[CNXCC] where I have tried to put the channel
limitation per SIP Server.
Thanks !
On Wed, Jun 4, 2014 at 3:07 PM, Carlos Ruiz Díaz <
carlos.ruizdiaz(a)gmail.com> wrote:
> Can you share your configuration file?
>
>
> On Wed, Jun 4, 2014 at 1:03 AM, Rahul MathuR <rahul.ultimate(a)gmail.com
> > wrote:
>
>> HI Carlos,
>>
>> Thanks for reply.
>>
>> In my case the key is SIP Server IP. My kamailio Proxy is connected
>> to many sip server IPs say 5. I want to limit maximum channels per sip
>> server ip. So I set max channels per sip server ip as
>> cnxcc_set_max_channels("$var(client1)", "$var(max_chan)");
and my
>> $var(client1) = "10.97.116.36"; is one of 5 sip servers connected to
>> Kamalio.
>>
>> Now I use your cnxcc_get_channel_count("$rd",
"$var(count1)"))
>> value(count1) to compare to the max_limit of the channels allowed for this
>> sip server. Psuedo Variable $rd is coming correctly that is same as sips
>> erver IP[$var(client1)].
>> But the problem is that cnxcc_get_channel_count("$rd",
>> "$var(count1)")) is always setting the value 1 in $var(count1)
variable
>> even though there are more calls runnning than what was set to be max_chan
>> (which was 100 in my case).
>>
>> Any pointers to achieve this matter ?
>>
>>
>>
>>
>>
>> On Tue, Jun 3, 2014 at 2:18 PM, Carlos Ruiz Díaz <
>> carlos.ruizdiaz(a)gmail.com> wrote:
>>
>>> Hi Rahul,
>>>
>>> I don't understand your example. In that case, you are always using
"10.97.116.36"
>>> as key, meaning that all calls will be hanging from same root.
>>>
>>> If you want to use the request-uri domain part, use $rd, not the
>>> full $ru. This will of course lead to 1 call being reported always, since
>>> request-URIs tend to be different from each other.
>>>
>>> Regards,
>>> Carlos
>>>
>>>
>>>
>>>
>>> On Tue, Jun 3, 2014 at 7:01 AM, Rahul MathuR <
>>> rahul.ultimate(a)gmail.com> wrote:
>>>
>>>> Hi Carlos,
>>>>
>>>> Sorry for coming late on this one.
>>>>
>>>> the ruri value in my example is '10.97.116.36'
>>>> and i have tried to configure kamailio to only cater 100
>>>> simultaneous calls on this SIP Server (10.97.116.36), after that it is
to
>>>> send 403.
>>>>
>>>> Below is the sample logic from kamailio.cfg
>>>>
>>>>
***********************************************************************************************************************
>>>> #Below lines to show an example of how I am maintaining the
>>>> business for Concurrent Call Restriction
>>>> route[CNXCC]
>>>> {
>>>>
>>>> $var(client1) = "10.97.116.36";
>>>> $var(max_chan) = 100;
>>>> #!ifdef CNXCC_CHANNEL
>>>> xlog("L_INFO", "Setting up channel based credit
control");
>>>>
>>>> $var(max_chan1) = 0;
>>>> $var(retcode) =
>>>> cnxcc_set_max_channels("$var(client1)",
"$var(max_chan)");
>>>>
>>>> if ($var(retcode) == -1) {
>>>> xlog("Error setting up credit control");
>>>> return;
>>>> }
>>>>
>>>> $var(count1) = -1;
>>>>
>>>> if (!cnxcc_get_channel_count("$rd",
"$var(count1)")) {
>>>> xlog("Error getting customer's channel
count");
>>>> }
>>>> xlog("RAHUL : CNXCC ROUTE: $var(client1) has $var(count1)
>>>> call(s)");
>>>> xlog("L_INFO", "CNXCC ROUTE: $var(client1) has
>>>> $var(count1) call(s)");
>>>>
>>>>
>>>> if ($var(count1) == $var(max_chan1)) {
>>>> xlog("Too many channels for customer");
>>>> sl_send_reply(403, "Forbidden");
>>>>
>>>> exit;
>>>> }
>>>> #!endif
>>>>
>>>>
******************************************************************************************************************************************************
>>>>
>>>> Now the problem that I am facing is that with multiple UACs (all
>>>> with same ruri - 10.97.116.36) dialing some pstn numbers, the value of
>>>> "count1" remains 1 for all cases. Hence, my purpose is defeated
because the
>>>> restriction is not being laid and more than 'max_chan' no. of
callers are
>>>> able to make the call.
>>>>
>>>> Could you please help me achieve this goal.
>>>>
>>>> Thanks !
>>>>
>>>>
>>>>
>>>> On Sat, May 17, 2014 at 2:22 AM, Carlos Ruiz Díaz <
>>>> carlos.ruizdiaz(a)gmail.com> wrote:
>>>>
>>>>> max_chan is equal to zero? You should put a positive value in here
>>>>> in order to make sense the function call.
>>>>>
>>>>> Also, you are using for one call the ID "x.y.z.a", and for
the
>>>>> other one $rd. Both should be the same for calls that suppose to be
>>>>> organized in the same group.
>>>>>
>>>>> Please take a look at the docs.
>>>>>
>>>>>
>>>>> On Fri, May 16, 2014 at 7:52 PM, Rahul MathuR <
>>>>> rahul.ultimate(a)gmail.com> wrote:
>>>>>
>>>>>> Further, from the logs it seems that cnxcc_set_max_channels is
>>>>>> returning -1 and I have no idea why it is failing.
>>>>>>
>>>>>>
>>>>>> On Sat, May 17, 2014 at 5:48 AM, Rahul MathuR <
>>>>>> rahul.ultimate(a)gmail.com> wrote:
>>>>>>
>>>>>>> Hello Carlos,
>>>>>>>
>>>>>>> Many thanks for your help.
>>>>>>> I followed the steps you mentioned for CNXCC. But even after
>>>>>>> making the max. calls to 0, I am still able to connect the
call. Below is
>>>>>>> the excerpt from kamailio.cfg
>>>>>>>
>>>>>>> request_route {
>>>>>>> setflag(DLG_FLAG);
>>>>>>> # per request initial checks
>>>>>>> route(REQINIT);
>>>>>>> # NAT detection
>>>>>>> route(NATDETECT);
>>>>>>> .
>>>>>>> .
>>>>>>> .
>>>>>>>
>>>>>>> if (is_method("INVITE")) {
>>>>>>> route(CNXCC);
>>>>>>> }
>>>>>>> }
>>>>>>>
>>>>>>> #Below lines added by Rahul for Concurrent Call Restriction
>>>>>>> route[CNXCC]
>>>>>>> {
>>>>>>>
>>>>>>> $var(client1) = "x.y.z.a";
>>>>>>>
>>>>>>> #!ifdef CNXCC_CHANNEL
>>>>>>> xlog("L_INFO", "Setting up channel
based credit
>>>>>>> control");
>>>>>>>
>>>>>>> $var(max_chan1) = 0;
>>>>>>> $var(retcode) =
>>>>>>> cnxcc_set_max_channels("$var(client1)",
"$var(max_chan)");
>>>>>>>
>>>>>>> if ($var(retcode) == -1) {
>>>>>>> xlog("Error setting up credit
control");
>>>>>>> return;
>>>>>>> }
>>>>>>>
>>>>>>> $var(count1) = -1;
>>>>>>>
>>>>>>> if (!cnxcc_get_channel_count("$rd",
"$var(count1)")) {
>>>>>>> xlog("Error getting customer's
channel count");
>>>>>>> }
>>>>>>> xlog("RAHUL : CNXCC ROUTE: $var(client) has
$var(count)
>>>>>>> call(s)");
>>>>>>> xlog("L_INFO", "CNXCC ROUTE:
$var(client) has
>>>>>>> $var(count) call(s)");
>>>>>>>
>>>>>>> if ($var(count1) == $var(max_chan1)) {
>>>>>>> xlog("Too many channels for
customer");
>>>>>>> sl_send_reply(403, "Forbidden");
>>>>>>>
>>>>>>> #if
(!cnxcc_terminate_all("$var(client)")) {
>>>>>>> # xlog("Error terminating
customer's
>>>>>>> calls");
>>>>>>> #}
>>>>>>>
>>>>>>> exit;
>>>>>>> }
>>>>>>> #!endif
>>>>>>>
>>>>>>>
>>>>>>> Could you please guide me where am I doing wrong ?
>>>>>>>
>>>>>>>
>>>>>>> On Sat, May 17, 2014 at 3:01 AM, Carlos Ruiz Díaz <
>>>>>>> carlos.ruizdiaz(a)gmail.com> wrote:
>>>>>>>
>>>>>>>> Any pseudo variable should work.
>>>>>>>>
>>>>>>>> I don't exactly know how your business work, but
I'd suggest
>>>>>>>> that instead of using from header domain, use the domain
part of the
>>>>>>>> request-uri, $rd.
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>> Carlos
>>>>>>>>
>>>>>>>>
>>>>>>>> On Fri, May 16, 2014 at 4:28 PM, Rahul MathuR <
>>>>>>>> rahul.ultimate(a)gmail.com> wrote:
>>>>>>>>
>>>>>>>>> Thank you very much Carlos !
>>>>>>>>>
>>>>>>>>> One last thing, can I use $fd in
cnxcc_set_max_channels as
>>>>>>>>> below -
>>>>>>>>> cnxcc_set_max_channels("$fd",
"$var(max_chan)");
>>>>>>>>> to restrict the simultaneous calls hitting a
particular domain
>>>>>>>>> ?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Sat, May 17, 2014 at 2:03 AM, Carlos Ruiz Díaz
<
>>>>>>>>> carlos.ruizdiaz(a)gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> Create a profile [1], and count the number of
calls of that
>>>>>>>>>> profile [2].
>>>>>>>>>>
>>>>>>>>>> Alternatively, you can use cnxcc module [3].
>>>>>>>>>>
>>>>>>>>>> [1]
>>>>>>>>>>
http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1919576
>>>>>>>>>> [2]
>>>>>>>>>>
http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1964064
>>>>>>>>>> [3]
>>>>>>>>>>
http://kamailio.org/docs/modules/stable/modules/cnxcc.html#idp132608
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Fri, May 16, 2014 at 3:28 PM, Rahul MathuR
<
>>>>>>>>>> rahul.ultimate(a)gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> *Hello,*
>>>>>>>>>>>
>>>>>>>>>>> *Please accept my apologies for asking a
simple question - Is there any example which shows how can I create the dialog profile
**value based on the SIP domain or SIP Server IP (IP like- 112.23.134.5). I** need to
control many SIP Server IPs with limited channels to each with my** Kamailio Proxy.*
>>>>>>>>>>>
>>>>>>>>>>> *I am a newbie to kamailio world.*
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> *-- Warm Regds.MathuRahul*
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
_______________________________________________
>>>>>>>>>>> sr-dev mailing list
>>>>>>>>>>> sr-dev(a)lists.sip-router.org
>>>>>>>>>>>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Carlos
>>>>>>>>>> http://caruizdiaz.com
>>>>>>>>>> http://ngvoice.com
>>>>>>>>>> +52 55 3048 3303
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> sr-dev mailing list
>>>>>>>>>> sr-dev(a)lists.sip-router.org
>>>>>>>>>>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Warm Regds.
>>>>>>>>> MathuRahul
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> sr-dev mailing list
>>>>>>>>> sr-dev(a)lists.sip-router.org
>>>>>>>>>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Carlos
>>>>>>>> http://caruizdiaz.com
>>>>>>>> http://ngvoice.com
>>>>>>>> +52 55 3048 3303
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> sr-dev mailing list
>>>>>>>> sr-dev(a)lists.sip-router.org
>>>>>>>>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Warm Regds.
>>>>>>> MathuRahul
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Warm Regds.
>>>>>> MathuRahul
>>>>>>
>>>>>> _______________________________________________
>>>>>> sr-dev mailing list
>>>>>> sr-dev(a)lists.sip-router.org
>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Carlos
>>>>> http://caruizdiaz.com
>>>>> http://ngvoice.com
>>>>> +52 55 3048 3303
>>>>>
>>>>> _______________________________________________
>>>>> sr-dev mailing list
>>>>> sr-dev(a)lists.sip-router.org
>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Warm Regds.
>>>> MathuRahul
>>>>
>>>> _______________________________________________
>>>> sr-dev mailing list
>>>> sr-dev(a)lists.sip-router.org
>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>
>>>>
>>>
>>>
>>> --
>>> Carlos
>>> http://caruizdiaz.com
>>> http://ngvoice.com
>>> +52 55 3048 3303
>>>
>>> _______________________________________________
>>> sr-dev mailing list
>>> sr-dev(a)lists.sip-router.org
>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>
>>>
>>
>>
>> --
>> Warm Regds.
>> MathuRahul
>>
>> _______________________________________________
>> sr-dev mailing list
>> sr-dev(a)lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>
>>
>
>
> --
> Carlos
> http://caruizdiaz.com
> http://ngvoice.com
> +52 55 3048 3303
>
> _______________________________________________
> sr-dev mailing list
> sr-dev(a)lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>
>
--
Warm Regds.
MathuRahul
--
Warm Regds.
MathuRahul
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
5:13 p.m.
Hello,
On 09/06/14 16:54, Carlos Ruiz Díaz wrote:
Hi Rahul,
/if($var(client1)!="null") /should be /if($var(client1)!="$null")/
even in the last IF, the double-quotes have to be removed around "$null"
-- just compare with $null, because doublequotes there enforces a static
string.
Cheers,
Daniel
/. /You are doing a string comparison with the string
value "/null/".
Also make sure the dialog matching is correct: append these event
routes to your config file:
/event_route[dialog:start] {/
/Â Â Â Â xlog("Dialog started");/
/}/
/
/
/event_route[dialog:end] {/
/Â Â Â Â xlog("Dialog ended");/
/}/
/
/
/event_route[dialog:failed] {/
/Â Â Â Â xlog("Dialog failed");/
/}/
You should see a "dialog started" and "dialog ended" for every
successful call.
Please do those modifications and see what happens.
Regards,
CarlosÂ
On Mon, Jun 9, 2014 at 6:55 AM, Rahul MathuR <rahul.ultimate(a)gmail.com
<mailto:rahul.ultimate@gmail.com>> wrote:
Hello Carlos,
Â
Were you able to look at my configuration file ?
Â
Â
Thanks !
On Fri, Jun 6, 2014 at 5:04 AM, Carlos Ruiz DÃaz
<carlos.ruizdiaz(a)gmail.com <mailto:carlos.ruizdiaz@gmail.com>> wrote:
Hi Rahul,
sorry, I couldn't find time to do it. I will take a look
tomorrow, or most possibly during the weekend.
Regards,
Carlos
On Thu, Jun 5, 2014 at 8:28 PM, Rahul MathuR
<rahul.ultimate(a)gmail.com <mailto:rahul.ultimate@gmail.com>>
wrote:
Hello Carlos,
Did you get a chance to look at the attached configuration
file ?
Warm Regds,
Rahul Mathur
On Thu, Jun 5, 2014 at 2:46 PM, Rahul MathuR
<rahul.ultimate(a)gmail.com
<mailto:rahul.ultimate@gmail.com>> wrote:
Hi Carlos,
Â
Please find attached the configuration file which I am
using.
Kindly refer route[CNXCC] where I have tried to put
the channel limitation per SIP Server.
Â
Â
Thanks !
On Wed, Jun 4, 2014 at 3:07 PM, Carlos Ruiz DÃaz
<carlos.ruizdiaz(a)gmail.com
<mailto:carlos.ruizdiaz@gmail.com>> wrote:
Can you share your configuration file?
On Wed, Jun 4, 2014 at 1:03 AM, Rahul MathuR
<rahul.ultimate(a)gmail.com
<mailto:rahul.ultimate@gmail.com>> wrote:
HI Carlos,
Â
Thanks for reply.
Â
In my case the key is SIP Server IP. My
kamailio Proxy is connected to many sip server
IPs say 5. I want to limit maximum channels
per sip server ip. So I set max channels per
sip server ip as
cnxcc_set_max_channels("$var(client1)",
"$var(max_chan)"); and my $var(client1) =
"10.97.116.36"; is one of 5 sip servers
connected to Kamalio.
Â
Now I use your cnxcc_get_channel_count("$rd",
"$var(count1)")) value(count1)Â to compare to
the max_limit of the channels allowed for this
sip server. Psuedo Variable $rd is coming
correctly that is same as sips erver
IP[$var(client1)].
But the problem is that
cnxcc_get_channel_count("$rd",
"$var(count1)"))Â is always setting the value
1 in $var(count1) variable even though there
are more calls runnning than what was set to
be max_chan (which was 100 in my case).
Â
Any pointers to achieve this matter ?
Â
Â
 Â
On Tue, Jun 3, 2014 at 2:18 PM, Carlos Ruiz
DÃaz <carlos.ruizdiaz(a)gmail.com
<mailto:carlos.ruizdiaz@gmail.com>> wrote:
Hi Rahul,
I don't understand your example. In that
case, you are always using "10.97.116.36"
as key, meaning that all calls will be
hanging from same root.
If you want to use the request-uri domain
part, use $rd, not the full $ru. This will
of course lead to 1 call being reported
always, since request-URIs tend to be
different from each other.
Regards,
Carlos
Â
On Tue, Jun 3, 2014 at 7:01 AM, Rahul
MathuR <rahul.ultimate(a)gmail.com
<mailto:rahul.ultimate@gmail.com>> wrote:
Hi Carlos,
Â
Sorry for coming late on this one.
Â
the ruri value in my example is
'10.97.116.36'
and i have tried to configure kamailio
to only cater 100 simultaneous calls
on this SIP Server (10.97.116.36),
after that it is to send 403.
Â
Below is the sample logic from
kamailio.cfg
***********************************************************************************************************************
 #Below lines to show an example of
how I am maintaining the business for
Concurrent Call Restriction
 route[CNXCC]
 {
Â
        Â
$var(client1)Â Â Â Â Â Â Â Â Â Â =
"10.97.116.36";
  $var(max_chan)  = 100;
 #!ifdef CNXCC_CHANNEL
         xlog("L_INFO",
"Setting up channel based credit
control");
Â
         $var(max_chan1) = 0;
         $var(retcode)  =
cnxcc_set_max_channels("$var(client1)",Â
"$var(max_chan)");
Â
         if ($var(retcode) ==
-1) {
                Â
xlog("Error setting up credit control");
                 return;
         }
Â
         $var(count1)   Â
= -1;
Â
         if
(!cnxcc_get_channel_count("$rd",
"$var(count1)")) {
                Â
xlog("Error getting customer's channel
count");
         }
         xlog("RAHUL : CNXCC
ROUTE: $var(client1) has $var(count1)
call(s)");
         xlog("L_INFO",
"CNXCC ROUTE: $var(client1) has
$var(count1)Â call(s)");
Â
         if ($var(count1) ==
$var(max_chan1)) {
                Â
xlog("Too many channels for customer");
                Â
sl_send_reply(403, "Forbidden");
Â
                  exit;
         }
 #!endif
******************************************************************************************************************************************************
Â
Now the problem that I am facing is
that with multiple UACs (all with same
ruri - 10.97.116.36) dialing some pstn
numbers, the value of "count1" remains
1 for all cases. Hence, my purpose is
defeated because the restriction is
not being laid and more than
'max_chan' no. of callers are able to
make the call.
Â
Could you please help me achieve this
goal.
Â
Thanks !
Â
On Sat, May 17, 2014 at 2:22 AM,
Carlos Ruiz DÃaz
<carlos.ruizdiaz(a)gmail.com
<mailto:carlos.ruizdiaz@gmail.com>> wrote:
max_chan is equal to zero? You
should put a positive value in
here in order to make sense the
function call.Â
Also, you are using for one call
the ID "x.y.z.a", and for the
other one $rd. Both should be the
same for calls that suppose to be
organized in the same group.
Please take a look at the docs.
On Fri, May 16, 2014 at 7:52 PM,
Rahul MathuR
<rahul.ultimate(a)gmail.com
<mailto:rahul.ultimate@gmail.com>>
wrote:
Further, from the logs it
seems that
cnxcc_set_max_channels is
returning -1 and I have no
idea why it is failing.
On Sat, May 17, 2014 at 5:48
AM, Rahul MathuR
<rahul.ultimate(a)gmail.com
<mailto:rahul.ultimate@gmail.com>>
wrote:
Hello Carlos,
Many thanks for your help.
I followed the steps you
mentioned for CNXCC. But
even after making the max.
calls to 0, I am still
able to connect the call.
Below is the excerpt from
kamailio.cfg
request_route { Â Â Â Â
setflag(DLG_FLAG); Â Â Â Â
# per request initial
checks    Â
route(REQINIT); Â Â Â Â
# NAT detection    Â
route(NATDETECT);
.
.
.
    if
(is_method("INVITE")) {
       Â
route(CNXCC);
    }
}
#Below lines added by
Rahul for Concurrent Call
Restriction
route[CNXCC]
{
    $var(client1) Â
    = "x.y.z.a";
#!ifdef CNXCC_CHANNEL Â
    xlog("L_INFO",
"Setting up channel based
credit control");
    $var(max_chan1) = 0;
    $var(retcode) Â
=
cnxcc_set_max_channels("$var(client1)",
"$var(max_chan)");
    if
($var(retcode) == -1) {
       Â
xlog("Error setting up
credit control");
        return;
    }
    $var(count1) Â
 = -1;
    if
(!cnxcc_get_channel_count("$rd",
"$var(count1)")) {
       Â
xlog("Error getting
customer's channel count");
    }
    xlog("RAHUL :
CNXCC ROUTE: $var(client)
has $var(count) call(s)");
    xlog("L_INFO",
"CNXCC ROUTE: $var(client)
has $var(count) call(s)");
    if
($var(count1) ==
$var(max_chan1)) {
       Â
xlog("Too many channels
for customer");
       Â
sl_send_reply(403,
"Forbidden");
        #if
(!cnxcc_terminate_all("$var(client)"))
{
        # Â
  xlog("Error
terminating customer's
calls");
        #}
        exit;
    }
#!endif
Could you please guide me
where am I doing wrong ?
On Sat, May 17, 2014 at
3:01 AM, Carlos Ruiz DÃaz
<carlos.ruizdiaz(a)gmail.com
<mailto:carlos.ruizdiaz@gmail.com>>
wrote:
Any pseudo variable
should work.Â
I don't exactly know
how your business
work, but I'd suggest
that instead of using
from header domain,
use the domain part of
the request-uri, $rd.
Regards,
Carlos
On Fri, May 16, 2014
at 4:28 PM, Rahul
MathuR
<rahul.ultimate(a)gmail.com
<mailto:rahul.ultimate@gmail.com>>
wrote:
Thank you very
much Carlos !
One last thing,
can I use $fd inÂ
cnxcc_set_max_channels
as below -Â
cnxcc_set_max_channels("$fd",
"$var(max_chan)");
to restrict the
simultaneous calls
hitting a
particular domain ?
On Sat, May 17,
2014 at 2:03 AM,
Carlos Ruiz DÃaz
<carlos.ruizdiaz(a)gmail.com
<mailto:carlos.ruizdiaz@gmail.com>>
wrote:
Create a
profile [1],
and count the
number of
calls of that
profile [2].
Alternatively,
you can use
cnxcc module [3].
[1]
http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1919576
[2]
http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1964064
[3]Â
http://kamailio.org/docs/modules/stable/modules/cnxcc.html#idp132608
On Fri, May
16, 2014 at
3:28 PM, Rahul
MathuR
<rahul.ultimate(a)gmail.com
<mailto:rahul.ultimate@gmail.com>>
wrote:
/Hello,/
/Please accept my apologies
for asking a simple question - Is there any example which shows how can I create the
dialog profile//value based on the SIP domain or SIP Server IP (IP like- 112.23.134.5).
I// need to control many SIP Server IPs with limited channels to each with my// Kamailio
Proxy./
/I am a
newbie to
kamailio
world./
/
/
/--
Warm Regds.
MathuRahul/
_______________________________________________
sr-dev
mailing list
sr-dev(a)lists.sip-router.org
<mailto:sr-dev@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048
3303
<tel:%2B52%2055%203048%203303>
_______________________________________________
sr-dev mailing
list
sr-dev(a)lists.sip-router.org
<mailto:sr-dev@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Warm Regds.
MathuRahul
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
<mailto:sr-dev@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
<tel:%2B52%2055%203048%203303>
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
<mailto:sr-dev@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Warm Regds.
MathuRahul
--
Warm Regds.
MathuRahul
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
<mailto:sr-dev@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
<tel:%2B52%2055%203048%203303>
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
<mailto:sr-dev@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Warm Regds.
MathuRahul
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
<mailto:sr-dev@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
<tel:%2B52%2055%203048%203303>
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
<mailto:sr-dev@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Warm Regds.
MathuRahul
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
<mailto:sr-dev@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303 <tel:%2B52%2055%203048%203303>
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
<mailto:sr-dev@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Warm Regds.
MathuRahul
--
Warm Regds.
MathuRahul
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
<mailto:sr-dev@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303 <tel:%2B52%2055%203048%203303>
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org <mailto:sr-dev@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Warm Regds.
MathuRahul
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org <mailto:sr-dev@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
5:24 p.m.
Yes, copy/paste error, sorry. I meant to say *!=$null.*
Thank you for noticing Daniel.
Carlos.
On Mon, Jun 9, 2014 at 10:13 AM, Daniel-Constantin Mierla <miconda(a)gmail.com
wrote:
> Hello,
>
>
> On 09/06/14 16:54, Carlos Ruiz Díaz wrote:
>
> Hi Rahul,
>
> *if($var(client1)!="null") *should be
*if($var(client1)!="$null")*
>
> even in the last IF, the double-quotes have to be removed around "$null"
> -- just compare with $null, because doublequotes there enforces a static
> string.
>
> Cheers,
> Daniel
>
>
> *. *You are doing a string comparison with the string value "*null*".
>
> Also make sure the dialog matching is correct: append these event routes
> to your config file:
>
> *event_route[dialog:start] {*
> * xlog("Dialog started");*
> *}*
>
> *event_route[dialog:end] {*
> * xlog("Dialog ended");*
> *}*
>
> *event_route[dialog:failed] {*
> * xlog("Dialog failed");*
> *}*
>
> You should see a "dialog started" and "dialog ended" for every
> successful call.
>
> Please do those modifications and see what happens.
>
> Regards,
> Carlos
>
>
>
>
> On Mon, Jun 9, 2014 at 6:55 AM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
>
>> Hello Carlos,
>>
>> Were you able to look at my configuration file ?
>>
>>
>> Thanks !
>>
>>
>> On Fri, Jun 6, 2014 at 5:04 AM, Carlos Ruiz Díaz <
>> carlos.ruizdiaz(a)gmail.com wrote:
>>
>>> Hi Rahul,
>>>
>>> sorry, I couldn't find time to do it. I will take a look tomorrow, or
>>> most possibly during the weekend.
>>>
>>> Regards,
>>> Carlos
>>>
>>>
>>> On Thu, Jun 5, 2014 at 8:28 PM, Rahul MathuR
<rahul.ultimate(a)gmail.com>
>> wrote:
>>>
>>>> Hello Carlos,
>>>>
>>>> Did you get a chance to look at the attached configuration file ?
>>>>
>>>>
>>>> Warm Regds,
>>>> Rahul Mathur
>>>>
>>>>
>>>> On Thu, Jun 5, 2014 at 2:46 PM, Rahul MathuR
<rahul.ultimate(a)gmail.com>
>>> wrote:
>>>>
>>>>> Hi Carlos,
>>>>>
>>>>> Please find attached the configuration file which I am using.
>>>>> Kindly refer route[CNXCC] where I have tried to put the channel
>>>>> limitation per SIP Server.
>>>>>
>>>>>
>>>>> Thanks !
>>>>>
>>>>>
>>>>> On Wed, Jun 4, 2014 at 3:07 PM, Carlos Ruiz Díaz <
>>>>> carlos.ruizdiaz(a)gmail.com
wrote:
>>>>>
>>>>>> Can you share your configuration file?
>>>>>>
>>>>>>
>>>>>> On Wed, Jun 4, 2014 at 1:03 AM, Rahul MathuR <
>>>>>> rahul.ultimate(a)gmail.com
wrote:
>>>>>>
>>>>>>> HI Carlos,
>>>>>>>
>>>>>>> Thanks for reply.
>>>>>>>
>>>>>>> In my case the key is SIP Server IP. My kamailio Proxy is
connected
>>>>>>> to many sip server IPs say 5. I want to limit maximum
channels per sip
>>>>>>> server ip. So I set max channels per sip server ip as
>>>>>>> cnxcc_set_max_channels("$var(client1)",
"$var(max_chan)"); and my
>>>>>>> $var(client1) = "10.97.116.36"; is one of 5 sip
servers connected to
>>>>>>> Kamalio.
>>>>>>>
>>>>>>> Now I use your cnxcc_get_channel_count("$rd",
"$var(count1)"))
>>>>>>> value(count1) to compare to the max_limit of the channels
allowed for this
>>>>>>> sip server. Psuedo Variable $rd is coming correctly that is
same as sips
>>>>>>> erver IP[$var(client1)].
>>>>>>> But the problem is that
cnxcc_get_channel_count("$rd",
>>>>>>> "$var(count1)")) is always setting the value 1 in
$var(count1) variable
>>>>>>> even though there are more calls runnning than what was set
to be max_chan
>>>>>>> (which was 100 in my case).
>>>>>>>
>>>>>>> Any pointers to achieve this matter ?
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Tue, Jun 3, 2014 at 2:18 PM, Carlos Ruiz Díaz <
>>>>>>> carlos.ruizdiaz(a)gmail.com
wrote:
>>>>>>>
>>>>>>>> Hi Rahul,
>>>>>>>>
>>>>>>>> I don't understand your example. In that case, you
are always
>>>>>>>> using "10.97.116.36" as key, meaning that all
calls will be
>>>>>>>> hanging from same root.
>>>>>>>>
>>>>>>>> If you want to use the request-uri domain part, use $rd,
not the
>>>>>>>> full $ru. This will of course lead to 1 call being
reported always, since
>>>>>>>> request-URIs tend to be different from each other.
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>> Carlos
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Tue, Jun 3, 2014 at 7:01 AM, Rahul MathuR <
>>>>>>>> rahul.ultimate(a)gmail.com
wrote:
>>>>>>>>
>>>>>>>>> Hi Carlos,
>>>>>>>>>
>>>>>>>>> Sorry for coming late on this one.
>>>>>>>>>
>>>>>>>>> the ruri value in my example is
'10.97.116.36'
>>>>>>>>> and i have tried to configure kamailio to only cater
100
>>>>>>>>> simultaneous calls on this SIP Server (10.97.116.36),
after that it is to
>>>>>>>>> send 403.
>>>>>>>>>
>>>>>>>>> Below is the sample logic from kamailio.cfg
>>>>>>>>>
>>>>>>>>>
***********************************************************************************************************************
>>>>>>>>> #Below lines to show an example of how I am
maintaining the
>>>>>>>>> business for Concurrent Call Restriction
>>>>>>>>> route[CNXCC]
>>>>>>>>> {
>>>>>>>>>
>>>>>>>>> $var(client1) =
"10.97.116.36";
>>>>>>>>> $var(max_chan) = 100;
>>>>>>>>> #!ifdef CNXCC_CHANNEL
>>>>>>>>> xlog("L_INFO", "Setting up
channel based credit
>>>>>>>>> control");
>>>>>>>>>
>>>>>>>>> $var(max_chan1) = 0;
>>>>>>>>> $var(retcode) =
>>>>>>>>> cnxcc_set_max_channels("$var(client1)",
"$var(max_chan)");
>>>>>>>>>
>>>>>>>>> if ($var(retcode) == -1) {
>>>>>>>>> xlog("Error setting up credit
control");
>>>>>>>>> return;
>>>>>>>>> }
>>>>>>>>>
>>>>>>>>> $var(count1) = -1;
>>>>>>>>>
>>>>>>>>> if
(!cnxcc_get_channel_count("$rd", "$var(count1)")) {
>>>>>>>>> xlog("Error getting
customer's channel count");
>>>>>>>>> }
>>>>>>>>> xlog("RAHUL : CNXCC ROUTE:
$var(client1) has
>>>>>>>>> $var(count1) call(s)");
>>>>>>>>> xlog("L_INFO", "CNXCC ROUTE:
$var(client1) has
>>>>>>>>> $var(count1) call(s)");
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> if ($var(count1) == $var(max_chan1)) {
>>>>>>>>> xlog("Too many channels for
customer");
>>>>>>>>> sl_send_reply(403,
"Forbidden");
>>>>>>>>>
>>>>>>>>> exit;
>>>>>>>>> }
>>>>>>>>> #!endif
>>>>>>>>>
>>>>>>>>>
******************************************************************************************************************************************************
>>>>>>>>>
>>>>>>>>> Now the problem that I am facing is that with
multiple UACs (all
>>>>>>>>> with same ruri - 10.97.116.36) dialing some pstn
numbers, the value of
>>>>>>>>> "count1" remains 1 for all cases. Hence, my
purpose is defeated because the
>>>>>>>>> restriction is not being laid and more than
'max_chan' no. of callers are
>>>>>>>>> able to make the call.
>>>>>>>>>
>>>>>>>>> Could you please help me achieve this goal.
>>>>>>>>>
>>>>>>>>> Thanks !
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Sat, May 17, 2014 at 2:22 AM, Carlos Ruiz Díaz
<
>>>>>>>>> carlos.ruizdiaz(a)gmail.com wrote:
>>>>>>>>>
>>>>>>>>>> max_chan is equal to zero? You should put a
positive value in
>>>>>>>>>> here in order to make sense the function call.
>>>>>>>>>>
>>>>>>>>>> Also, you are using for one call the ID
"x.y.z.a", and for the
>>>>>>>>>> other one $rd. Both should be the same for calls
that suppose to be
>>>>>>>>>> organized in the same group.
>>>>>>>>>>
>>>>>>>>>> Please take a look at the docs.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Fri, May 16, 2014 at 7:52 PM, Rahul MathuR
<
>>>>>>>>>> rahul.ultimate(a)gmail.com wrote:
>>>>>>>>>>
>>>>>>>>>>> Further, from the logs it seems that
cnxcc_set_max_channels is
>>>>>>>>>>> returning -1 and I have no idea why it is
failing.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Sat, May 17, 2014 at 5:48 AM, Rahul MathuR
<
>>>>>>>>>>> rahul.ultimate(a)gmail.com wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hello Carlos,
>>>>>>>>>>>>
>>>>>>>>>>>> Many thanks for your help.
>>>>>>>>>>>> I followed the steps you mentioned for
CNXCC. But even after
>>>>>>>>>>>> making the max. calls to 0, I am still
able to connect the call. Below is
>>>>>>>>>>>> the excerpt from kamailio.cfg
>>>>>>>>>>>>
>>>>>>>>>>>> request_route {
>>>>>>>>>>>> setflag(DLG_FLAG);
>>>>>>>>>>>> # per request initial checks
>>>>>>>>>>>> route(REQINIT);
>>>>>>>>>>>> # NAT detection
>>>>>>>>>>>> route(NATDETECT);
>>>>>>>>>>>> .
>>>>>>>>>>>> .
>>>>>>>>>>>> .
>>>>>>>>>>>>
>>>>>>>>>>>> if
(is_method("INVITE")) {
>>>>>>>>>>>> route(CNXCC);
>>>>>>>>>>>> }
>>>>>>>>>>>> }
>>>>>>>>>>>>
>>>>>>>>>>>> #Below lines added by Rahul for
Concurrent Call Restriction
>>>>>>>>>>>> route[CNXCC]
>>>>>>>>>>>> {
>>>>>>>>>>>>
>>>>>>>>>>>> $var(client1) =
"x.y.z.a";
>>>>>>>>>>>>
>>>>>>>>>>>> #!ifdef CNXCC_CHANNEL
>>>>>>>>>>>> xlog("L_INFO",
"Setting up channel based credit
>>>>>>>>>>>> control");
>>>>>>>>>>>>
>>>>>>>>>>>> $var(max_chan1) = 0;
>>>>>>>>>>>> $var(retcode) =
>>>>>>>>>>>>
cnxcc_set_max_channels("$var(client1)", "$var(max_chan)");
>>>>>>>>>>>>
>>>>>>>>>>>> if ($var(retcode) == -1) {
>>>>>>>>>>>> xlog("Error setting
up credit control");
>>>>>>>>>>>> return;
>>>>>>>>>>>> }
>>>>>>>>>>>>
>>>>>>>>>>>> $var(count1) = -1;
>>>>>>>>>>>>
>>>>>>>>>>>> if
(!cnxcc_get_channel_count("$rd", "$var(count1)")) {
>>>>>>>>>>>> xlog("Error getting
customer's channel count");
>>>>>>>>>>>> }
>>>>>>>>>>>> xlog("RAHUL : CNXCC ROUTE:
$var(client) has $var(count)
>>>>>>>>>>>> call(s)");
>>>>>>>>>>>> xlog("L_INFO",
"CNXCC ROUTE: $var(client) has
>>>>>>>>>>>> $var(count) call(s)");
>>>>>>>>>>>>
>>>>>>>>>>>> if ($var(count1) ==
$var(max_chan1)) {
>>>>>>>>>>>> xlog("Too many
channels for customer");
>>>>>>>>>>>> sl_send_reply(403,
"Forbidden");
>>>>>>>>>>>>
>>>>>>>>>>>> #if
(!cnxcc_terminate_all("$var(client)")) {
>>>>>>>>>>>> # xlog("Error
terminating customer's
>>>>>>>>>>>> calls");
>>>>>>>>>>>> #}
>>>>>>>>>>>>
>>>>>>>>>>>> exit;
>>>>>>>>>>>> }
>>>>>>>>>>>> #!endif
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Could you please guide me where am I
doing wrong ?
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Sat, May 17, 2014 at 3:01 AM, Carlos
Ruiz Díaz <
>>>>>>>>>>>> carlos.ruizdiaz(a)gmail.com wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Any pseudo variable should work.
>>>>>>>>>>>>>
>>>>>>>>>>>>> I don't exactly know how your
business work, but I'd suggest
>>>>>>>>>>>>> that instead of using from header
domain, use the domain part of the
>>>>>>>>>>>>> request-uri, $rd.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>> Carlos
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Fri, May 16, 2014 at 4:28 PM,
Rahul MathuR <
>>>>>>>>>>>>> rahul.ultimate(a)gmail.com wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thank you very much Carlos !
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> One last thing, can I use $fd in
cnxcc_set_max_channels as
>>>>>>>>>>>>>> below -
>>>>>>>>>>>>>>
cnxcc_set_max_channels("$fd", "$var(max_chan)");
>>>>>>>>>>>>>> to restrict the simultaneous
calls hitting a particular
>>>>>>>>>>>>>> domain ?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Sat, May 17, 2014 at 2:03 AM,
Carlos Ruiz Díaz <
>>>>>>>>>>>>>> carlos.ruizdiaz(a)gmail.com wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Create a profile [1], and
count the number of calls of that
>>>>>>>>>>>>>>> profile [2].
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Alternatively, you can use
cnxcc module [3].
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> [1]
>>>>>>>>>>>>>>>
http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1919576
>>>>>>>>>>>>>>> [2]
>>>>>>>>>>>>>>>
http://kamailio.org/docs/modules/stable/modules/dialog.html#idp1964064
>>>>>>>>>>>>>>> [3]
>>>>>>>>>>>>>>>
http://kamailio.org/docs/modules/stable/modules/cnxcc.html#idp132608
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Fri, May 16, 2014 at 3:28
PM, Rahul MathuR <
>>>>>>>>>>>>>>> rahul.ultimate(a)gmail.com wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> *Hello,*
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> *Please accept my
apologies for asking a simple question - Is there any example which shows how can I create
the dialog profile **value based on the SIP domain or SIP Server IP (IP like-
112.23.134.5). I** need to control many SIP Server IPs with limited channels to each with
my** Kamailio Proxy.*
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> *I am a newbie to
kamailio world.*
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> *-- Warm Regds.
MathuRahul*
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
_______________________________________________
>>>>>>>>>>>>>>>> sr-dev mailing list
>>>>>>>>>>>>>>>>
sr-dev(a)lists.sip-router.org
>>>>>>>>>>>>>>>>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Carlos
>>>>>>>>>>>>>>> http://caruizdiaz.com
>>>>>>>>>>>>>>> http://ngvoice.com
>>>>>>>>>>>>>>> +52 55 3048 3303
<%2B52%2055%203048%203303>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
_______________________________________________
>>>>>>>>>>>>>>> sr-dev mailing list
>>>>>>>>>>>>>>> sr-dev(a)lists.sip-router.org
>>>>>>>>>>>>>>>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> Warm Regds.
>>>>>>>>>>>>>> MathuRahul
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
_______________________________________________
>>>>>>>>>>>>>> sr-dev mailing list
>>>>>>>>>>>>>> sr-dev(a)lists.sip-router.org
>>>>>>>>>>>>>>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> Carlos
>>>>>>>>>>>>> http://caruizdiaz.com
>>>>>>>>>>>>> http://ngvoice.com
>>>>>>>>>>>>> +52 55 3048 3303
<%2B52%2055%203048%203303>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
_______________________________________________
>>>>>>>>>>>>> sr-dev mailing list
>>>>>>>>>>>>> sr-dev(a)lists.sip-router.org
>>>>>>>>>>>>>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> Warm Regds.
>>>>>>>>>>>> MathuRahul
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> Warm Regds.
>>>>>>>>>>> MathuRahul
>>>>>>>>>>>
>>>>>>>>>>>
_______________________________________________
>>>>>>>>>>> sr-dev mailing list
>>>>>>>>>>> sr-dev(a)lists.sip-router.org
>>>>>>>>>>>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Carlos
>>>>>>>>>> http://caruizdiaz.com
>>>>>>>>>> http://ngvoice.com
>>>>>>>>>> +52 55 3048 3303
<%2B52%2055%203048%203303>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> sr-dev mailing list
>>>>>>>>>> sr-dev(a)lists.sip-router.org
>>>>>>>>>>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Warm Regds.
>>>>>>>>> MathuRahul
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> sr-dev mailing list
>>>>>>>>> sr-dev(a)lists.sip-router.org
>>>>>>>>>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Carlos
>>>>>>>> http://caruizdiaz.com
>>>>>>>> http://ngvoice.com
>>>>>>>> +52 55 3048 3303 <%2B52%2055%203048%203303>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> sr-dev mailing list
>>>>>>>> sr-dev(a)lists.sip-router.org
>>>>>>>>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Warm Regds.
>>>>>>> MathuRahul
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> sr-dev mailing list
>>>>>>> sr-dev(a)lists.sip-router.org
>>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Carlos
>>>>>> http://caruizdiaz.com
>>>>>> http://ngvoice.com
>>>>>> +52 55 3048 3303 <%2B52%2055%203048%203303>
>>>>>>
>>>>>> _______________________________________________
>>>>>> sr-dev mailing list
>>>>>> sr-dev(a)lists.sip-router.org
>>>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Warm Regds.
>>>>> MathuRahul
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Warm Regds.
>>>> MathuRahul
>>>>
>>>> _______________________________________________
>>>> sr-dev mailing list
>>>> sr-dev(a)lists.sip-router.org
>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>>
>>>>
>>>
>>>
>>> --
>>> Carlos
>>> http://caruizdiaz.com
>>> http://ngvoice.com
>>> +52 55 3048 3303 <%2B52%2055%203048%203303>
>>>
>>> _______________________________________________
>>> sr-dev mailing list
>>> sr-dev(a)lists.sip-router.org
>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>>
>>>
>>
>>
>> --
>> Warm Regds.
>> MathuRahul
>>
>> _______________________________________________
>> sr-dev mailing list
>> sr-dev(a)lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>>
>>
>
>
> --
> Carlos
> http://caruizdiaz.com
> http://ngvoice.com
> +52 55 3048 3303
>
>
> _______________________________________________
> sr-dev mailing
listsr-dev@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>
>
> --
> Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda -
http://www.linkedin.com/in/miconda
>
>
> _______________________________________________
> sr-dev mailing list
> sr-dev(a)lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
>
>
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
5:26 p.m.
Yes, copy/paste error, sorry. I meant to say *!=$null.*
Thank you for noticing Daniel.
On Mon, Jun 9, 2014 at 10:13 AM, Daniel-Constantin Mierla <miconda(a)gmail.com
wrote:
> Hello,
>
>
> On 09/06/14 16:54, Carlos Ruiz Díaz wrote:
>
> Hi Rahul,
>
> *if($var(client1)!="null") *should be
*if($var(client1)!="$null")*
>
> even in the last IF, the double-quotes have to be removed around "$null"
> -- just compare with $null, because doublequotes there enforces a static
> string.
>
> Cheers,
> Daniel
>
>
> *. *You are doing a string comparison with the string value "*null*".
>
> Also make sure the dialog matching is correct: append these event routes
> to your config file:
>
> *event_route[dialog:start] {*
> * xlog("Dialog started");*
> *}*
>
> *event_route[dialog:end] {*
> * xlog("Dialog ended");*
> *}*
>
> *event_route[dialog:failed] {*
> * xlog("Dialog failed");*
> *}*
>
> You should see a "dialog started" and "dialog ended" for every
> successful call.
>
> Please do those modifications and see what happens.
>
> Regards,
> Carlos
>
>
>
>
> On Mon, Jun 9, 2014 at 6:55 AM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
>
>> Hello Carlos,
>>
>> Were you able to look at my configuration file ?
>>
>>
>>
>> Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
5:53 p.m.
Presumably in recent versions (since the comparison fix), $var(…) cannot be compared with
$null.
Should this be comparing with an empty string instead or using a pv type that can be
null?
Hugh
From: sr-dev-bounces(a)lists.sip-router.org [mailto:sr-dev-bounces@lists.sip-router.org] On
Behalf Of Carlos Ruiz Díaz
Sent: 09 June 2014 16:27
To: Daniel-Constantin Mierla; Kamailio (SER) - Development Mailing List
Subject: Re: [sr-dev] Fwd: Create multiple profiles using dialog module
Yes, copy/paste error, sorry. I meant to say !=$null.
Thank you for noticing Daniel.
On Mon, Jun 9, 2014 at 10:13 AM, Daniel-Constantin Mierla
<miconda@gmail.com<mailto:miconda@gmail.com>> wrote:
Hello,
On 09/06/14 16:54, Carlos Ruiz Díaz wrote:
Hi Rahul,
if($var(client1)!="null") should be if($var(client1)!="$null")
even in the last IF, the double-quotes have to be removed around "$null" -- just
compare with $null, because doublequotes there enforces a static string.
Cheers,
Daniel
. You are doing a string comparison with the string value "null".
Also make sure the dialog matching is correct: append these event routes to your config
file:
event_route[dialog:start] {
xlog("Dialog started");
}
event_route[dialog:end] {
xlog("Dialog ended");
}
event_route[dialog:failed] {
xlog("Dialog failed");
}
You should see a "dialog started" and "dialog ended" for every
successful call.
Please do those modifications and see what happens.
Regards,
Carlos
On Mon, Jun 9, 2014 at 6:55 AM, Rahul MathuR
<rahul.ultimate@gmail.com<mailto:rahul.ultimate@gmail.com>> wrote:
Hello Carlos,
Were you able to look at my configuration file ?
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
________________________________
This e-mail and any attachment is for authorised use by the intended recipient(s) only. It
may contain proprietary material, confidential information and/or be subject to legal
privilege. It should not be copied, disclosed to, retained or used by, any other party. If
you are not an intended recipient then please promptly delete this e-mail and any
attachment and all copies and inform the sender. Thank you for understanding.
5:57 p.m.
Good spot, $var(x) is implicit 0 (when it is not set).
Cheers,
Daniel
On 09/06/14 17:53, Waite, Hugh wrote:
Presumably in recent versions (since the comparison fix), $var(…)
cannot be compared with $null.
Should this be comparing with an empty string instead or using a pv
type that can be null?
Hugh
*From:*sr-dev-bounces@lists.sip-router.org
[mailto:sr-dev-bounces@lists.sip-router.org] *On Behalf Of *Carlos
Ruiz Díaz
*Sent:* 09 June 2014 16:27
*To:* Daniel-Constantin Mierla; Kamailio (SER) - Development Mailing List
*Subject:* Re: [sr-dev] Fwd: Create multiple profiles using dialog module
Yes, copy/paste error, sorry. I meant to say *!=$null.*
Thank you for noticing Daniel.
On Mon, Jun 9, 2014 at 10:13 AM, Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
Hello,
On 09/06/14 16:54, Carlos Ruiz Díaz wrote:
Hi Rahul,
/if($var(client1)!="null") /should be
/if($var(client1)!="$null")/
even in the last IF, the double-quotes have to be removed around
"$null" -- just compare with $null, because doublequotes there
enforces a static string.
Cheers,
Daniel
/. /You are doing a string comparison with the string value "/null/".
Also make sure the dialog matching is correct: append these event
routes to your config file:
/event_route[dialog:start] {/
/ xlog("Dialog started");/
/}/
/event_route[dialog:end] {/
/ xlog("Dialog ended");/
/}/
/event_route[dialog:failed] {/
/ xlog("Dialog failed");/
/}/
You should see a "dialog started" and "dialog ended" for every
successful call.
Please do those modifications and see what happens.
Regards,
Carlos
On Mon, Jun 9, 2014 at 6:55 AM, Rahul MathuR <rahul.ultimate(a)gmail.com
<mailto:rahul.ultimate@gmail.com>> wrote:
Hello Carlos,
Were you able to look at my configuration file ?
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
------------------------------------------------------------------------
This e-mail and any attachment is for authorised use by the intended
recipient(s) only. It may contain proprietary material, confidential
information and/or be subject to legal privilege. It should not be
copied, disclosed to, retained or used by, any other party. If you are
not an intended recipient then please promptly delete this e-mail and
any attachment and all copies and inform the sender. Thank you for
understanding.
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
5:58 p.m.
In that case:
*If (!strempty($var(client1))) *instead of* if ($var(client1)!=$null)*
On Mon, Jun 9, 2014 at 10:53 AM, Waite, Hugh <hugh.waite(a)acision.com> wrote:
Presumably in recent versions (since the comparison
fix), $var(…) cannot
be compared with $null.
Should this be comparing with an empty string instead or using a pv type
that can be null?
Hugh
*From:* sr-dev-bounces(a)lists.sip-router.org [mailto:
sr-dev-bounces(a)lists.sip-router.org] *On Behalf Of *Carlos Ruiz Díaz
*Sent:* 09 June 2014 16:27
*To:* Daniel-Constantin Mierla; Kamailio (SER) - Development Mailing List
*Subject:* Re: [sr-dev] Fwd: Create multiple profiles using dialog module
Yes, copy/paste error, sorry. I meant to say *!=$null.*
Thank you for noticing Daniel.
On Mon, Jun 9, 2014 at 10:13 AM, Daniel-Constantin Mierla <
miconda(a)gmail.com> wrote:
Hello,
On 09/06/14 16:54, Carlos Ruiz Díaz wrote:
Hi Rahul,
*if($var(client1)!="null") *should be *if($var(client1)!="$null")*
even in the last IF, the double-quotes have to be removed around "$null"
-- just compare with $null, because doublequotes there enforces a static
string.
Cheers,
Daniel
*. *You are doing a string comparison with the string value "*null*".
Also make sure the dialog matching is correct: append these event routes
to your config file:
*event_route[dialog:start] {*
* xlog("Dialog started");*
*}*
*event_route[dialog:end] {*
* xlog("Dialog ended");*
*}*
*event_route[dialog:failed] {*
* xlog("Dialog failed");*
*}*
You should see a "dialog started" and "dialog ended" for every
successful
call.
Please do those modifications and see what happens.
Regards,
Carlos
On Mon, Jun 9, 2014 at 6:55 AM, Rahul MathuR <rahul.ultimate(a)gmail.com>
wrote:
Hello Carlos,
Were you able to look at my configuration file ?
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
------------------------------
This e-mail and any attachment is for authorised use by the intended
recipient(s) only. It may contain proprietary material, confidential
information and/or be subject to legal privilege. It should not be copied,
disclosed to, retained or used by, any other party. If you are not an
intended recipient then please promptly delete this e-mail and any
attachment and all copies and inform the sender. Thank you for
understanding.
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+52 55 3048 3303
3602
days inactive
3626
days old
21 comments
4 participants
participants (4)
-
Carlos Ruiz Díaz -
Daniel-Constantin Mierla -
Rahul MathuR -
Waite, Hugh