THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. A new Flyspray task has been opened. Details are below. User who did this - Michel de Weerd (mweerd) Attached to Project - sip-router Summary - Notify has incorrect information when q=0.5 in the Contact header Task Type - Bug Report Category - Modules kamailio Status - Unconfirmed Assigned To - Operating System - All Severity - Medium Priority - Normal Reported Version - 4.0 Due in Version - Undecided Due Date - Undecided Details - When the ims_registar_scscf module sends a Notify after a deregistration and the contact has q= parameter, the XML contains state terminated for the AOR, and for the contact the state is active. <?xml version="1.0"?> <reginfo xmlns="urn:ietf:params:xml:ns:reginfo" version="1" state="partial"> <registration aor="sip:+351915639755@nl.intinfra.com" id="0x2aeaf52ebb80" state="terminated"> <contact id="0x2aeaf52ebdd0" state="active" event="registered" expires="3558" q="0.500"> <uri>sip:+351915639755@192.168.230.47:5060;ep=192.168.137.206:49856;transport=udp</uri> </contact> </registration> </reginfo> When q= parameter is not added in the contact field, the XML in the notify contains the following information after deregistration, AOR is terminated and also contact id in the state terminated. <?xml version="1.0"?> <reginfo xmlns="urn:ietf:params:xml:ns:reginfo" version="1" state="partial"> <registration aor="sip:+31652526347@nl.intinfra.com" id="0x2b3396aecd60" state="terminated"> <contact id="0x2b3396af1e60" state="terminated" event="unregistered" expires="0"> <uri>sip:+31652526347@10.38.102.75:49844;transport=tcp</uri> </contact> </registration> </reginfo> The contact in the XML of the notify seems to be incorrectly constructed when q=.. used in the contact header. Attached a patch which creates the correct contact info when the subscriber deregisters One or more files have been attached. More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=342 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.