git:master: IMS example config files: update icscf and scscf config files to correctly use async route blocks
Module: sip-router Branch: master Commit: bf08aa1a3859766caf0842fdd30b9fc2f4a4ff43 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=bf08aa1a...
Author: Richard Good richard.good@smilecoms.com Committer: Richard Good richard.good@smilecoms.com Date: Tue Jun 25 14:11:13 2013 +0200
IMS example config files: update icscf and scscf config files to correctly use async route blocks - This fix updates the example ICSCF and SCSCF config files to correctly use route blocks for the replies of any asynchronous Diameter messages
---
examples/icscf/kamailio.cfg | 53 +++++++++++------ examples/scscf/kamailio.cfg | 130 ++++++++++++++++++++++++++++++++---------- 2 files changed, 133 insertions(+), 50 deletions(-)
diff --git a/examples/icscf/kamailio.cfg b/examples/icscf/kamailio.cfg index c66cb25..6a0de63 100644 --- a/examples/icscf/kamailio.cfg +++ b/examples/icscf/kamailio.cfg @@ -312,29 +312,44 @@ route[register] #free this from the failed I_scscf_select call I_scscf_drop(); # Do an asynchronous UAR: - I_perform_user_authorization_request("0"); - if ($avp(uaa_return_code) == 1) { - if (I_scscf_select("0")) { - t_on_reply("register_reply"); - t_on_failure("register_failure"); - if (!t_relay()) { - t_reply("500","Error forwarding towards S-CSCF"); - break; - } - break; - } else { - I_scscf_drop(); - t_reply("500", "Server error on UAR select S-CSCF"); - break; - } - } else { - t_reply("500", "Server error on UAR select S-CSCF"); - break; - } + I_perform_user_authorization_request("REG_UAR_REPLY","0"); #0=REG/DEREG; 1=REG+Capabilities + exit; } break; }
+route[REG_UAR_REPLY] +{ + #this is async so to know status we have to check the reply avp + switch ($avp(s:uaa_return_code)){ + case 1: #success + if (I_scscf_select("0")){ + t_on_failure("register_failure"); + t_on_reply("register_reply"); + #now relay to appropriate SCSCF + if (!t_relay()) { + t_reply("500", "Error forwarding to SCSCF"); + } + } else {#select failed + I_scscf_drop(); + t_reply("500", "Server error on SCSCF Select (UAR)"); + } + break; + case -1: #failure + xlog("L_ERR", "UAR failure - error response sent from module\n"); + break; + case -2: #error + xlog("L_ERR", "UAR error - sending error response now\n"); + t_reply("500", "UAR failed"); + break; + default: + xlog("L_ERR", "Unknown return code from UAR, value is [$avp(s:uaa_return_code)]\n"); + t_reply("500", "Unknown response code from UAR"); + break; + } +} + + ###################################################################### # Replies to REGISTER requests, ###################################################################### diff --git a/examples/scscf/kamailio.cfg b/examples/scscf/kamailio.cfg index f3b3cac..b8c9f1b 100644 --- a/examples/scscf/kamailio.cfg +++ b/examples/scscf/kamailio.cfg @@ -353,7 +353,8 @@ route { if (uri=~"sip:(.*)@"+NETWORKNAME_ESC +"(.*)" || uri=~"tel:.*") { if (!term_impu_registered("location")) { xlog("L_ERR", "We need to do an UNREG server SAR assignemnt"); - assign_server_unreg("location", "term"); + assign_server_unreg("UNREG_SAR_REPLY", "location", "term"); + exit; } } else { sl_send_reply("403","Forbidden - Dialog not found on S-CSCF or Terminating user not suitable for unregistered services"); @@ -364,6 +365,28 @@ route { } }
+route[UNREG_SAR_REPLY] +{ + xlog("L_DBG","saa_return code is $avp(s:saa_return_code)\n"); + switch ($avp(s:saa_return_code)){ + case 1: #success + xlog("L_DBG", "SAR success - will route message\n"); + route(term); + break; + case -1: #failure + xlog("L_ERR", "SAR failure - error response sent from module\n"); + break; + case -2: #error + xlog("L_ERR", "SAR error - error response sent from module\n"); + break; + default: + xlog("L_ERR", "Unknown return code from SAR, value is [$avp(s:saa_return_code)]\n"); + break; + } + exit; +} + + ###################################################################### # Helper routes (Basic-Checks, NAT-Handling/RTP-Control, XML-RPC) ###################################################################### @@ -458,26 +481,7 @@ route[REGISTER] { } else { #user has not been authenticated. Lets send a challenge via 401 Unauthorized xlog("L_DBG","About to challenge! auth_ims\n"); - ims_www_challenge("$td"); - #this is async so to know status we have to check the reply avp - xlog("L_DBG","maa_return code is $avp(s:maa_return_code)\n"); - - switch ($avp(s:maa_return_code)){ - case 1: #success - xlog("L_DBG", "MAR success - 401/407 response sent from module"); - break; - case -1: #failure - xlog("L_ERR", "MAR failure - error response sent from module"); - break; - case -2: #error - xlog("L_ERR", "MAR error - sending error response now"); - t_reply("500", "MAR failed"); - break; - default: - xlog("L_ERR", "Unknown return code from MAR, value is [$avp(s:uaa_return_code)]"); - t_reply("500", "Unknown response code from MAR"); - break; - } + ims_www_challenge("REG_MAR_REPLY", "$td"); exit; } } else { @@ -485,21 +489,85 @@ route[REGISTER] { # We need to check if this user is registered or not if (!impu_registered("location")) { xlog("L_ERR", "Not REGISTERED\n"); - save("location"); - if ($avp(saa_return_code) == 1) { - isc_match_filter_reg("0","location"); - exit; - } + save("PRE_REG_SAR_REPLY","location"); + exit; } else { - save("location"); - if($avp(saa_return_code) == 1) { - isc_match_filter_reg("1","location"); - exit; - } + isc_match_filter_reg("1","location"); + save("REG_SAR_REPLY","location"); + exit; } } }
+route[REG_MAR_REPLY] +{ + #this is async so to know status we have to check the reply avp + xlog("L_DBG","maa_return code is $avp(s:maa_return_code)\n"); + + switch ($avp(s:maa_return_code)){ + case 1: #success + xlog("L_DBG", "MAR success - 401/407 response sent from module\n"); + break; + case -1: #failure + xlog("L_ERR", "MAR failure - error response sent from module\n"); + break; + case -2: #error + xlog("L_ERR", "MAR error - sending error response now\n"); + t_reply("500", "MAR failed"); + break; + default: + xlog("L_ERR", "Unknown return code from MAR, value is [$avp(s:uaa_return_code)]\n"); + t_reply("500", "Unknown response code from MAR"); + break; + } + exit; +} + +route[PRE_REG_SAR_REPLY] +{ + xlog("L_DBG","saa_return code is $avp(s:saa_return_code)\n"); + #this is async so to know status we have to check the reply avp + xlog("L_DBG","saa_return code (for scscf_save on register) is $avp(s:saa_return_code)\n"); + switch ($avp(s:saa_return_code)){ + case 1: #success + xlog("L_DBG", "SAR success - 200 response sent from module\n"); + isc_match_filter_reg("0","location"); + exit; + case -1: #failure + xlog("L_ERR", "SAR failure - error response sent from module\n"); + break; + case -2: #error + xlog("L_ERR", "SAR error - error response sent from module\n"); + break; + default: + xlog("L_ERR", "Unknown return code from SAR, value is [$avp(s:uaa_return_code)]\n"); + break; + } + exit; +} + +route[REG_SAR_REPLY] +{ + xlog("L_DBG","saa_return code is $avp(s:saa_return_code)\n"); + #this is async so to know status we have to check the reply avp + xlog("L_DBG","saa_return code (for scscf_save on register) is $avp(s:saa_return_code)\n"); + switch ($avp(s:saa_return_code)){ + case 1: #success + xlog("L_DBG", "SAR success - 200 response sent from module\n"); + exit; + case -1: #failure + xlog("L_ERR", "SAR failure - error response sent from module\n"); + break; + case -2: #error + xlog("L_ERR", "SAR error - error response sent from module\n"); + break; + default: + xlog("L_ERR", "Unknown return code from SAR, value is [$avp(s:uaa_return_code)]\n"); + break; + } + exit; +} + ###################################################################### # Apply privacy, if requested ######################################################################
-
Richard Good