Hi Hugh,
i think the common way to use an advertized address with the following function:
http://www.kamailio.org/docs/modules/devel/modules_k/rr.html#id2547566
or to directly insert a route header using the textops-insert_hf function.
That is not the nicest way to do it, but it works in all my known cases.
But should definitely only use it, if you know what you're doing...
Kind regards,
Carsten
2011/9/28 Hugh Waite <hugh.waite(a)crocodile-rcs.com>om>:
Hello developers,
We are configuring a kamailio server that will be behind a UCARP virtual IP
and/or SIP load balancers. This means we need to use the
'advertised_address:advertised_port' variables. The documentation states
that these will be used in "Via headers and other destination lumps (e.g. RR
header)", however it only seems to work for Via's and not Record-Route's.
We have been using record_route_preset() as a workaround, but this does not
allow me to add rr parameters onto it.
I would like to fix the record_route code to use advertised address (if
set), but the code for inserting Via's and RR's is very different; I'm not
sure about the correct way to do this, or if the current behaviour was
chosen for a reason.
Can someone with knowledge of this area help me out here?
Best regards,
Hugh
--
--
Hugh Waite
Senior Design Engineer
Crocodile RCS Ltd.
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Carsten Bock
CEO (Geschäftsführer)
ng-voice GmbH i. Gr.
Schomburgstr. 80
D-22767 Hamburg / Germany
http://www.ng-voice.com
mailto:carsten@ng-voice.com
Mobile +49 179 2021244
Office +49 40 34927219
Fax +49 40 34927220