23 Apr
2010
23 Apr
'10
6:18 p.m.
Module: sip-router
Branch: master
Commit: 20cddb28e968d8e0f79a7910d3cc83fa6f40887f
URL:
http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=20cddb2…
Author: Daniel-Constantin Mierla <miconda(a)gmail.com>
Committer: Daniel-Constantin Mierla <miconda(a)gmail.com>
Date: Fri Apr 23 23:58:43 2010 +0200
cfg: extended preprocessor directives
- you can define values for IDs
- defined IDs are replaced at startup, during config parsing, e.g.,:
$var(x) = 100 + MYINT;
- is interpreted as:
$var(x) = 100 + 123;
- you can have multi-line defined IDs
while($var(i)<5) { \
xlog("++++ $var(i)\n"); \
$var(i) = $var(i) + 1; \
}
- then in routing block
route {
...
IDLOOP
...
}
- new preprocessor directive
- perform substitutions inside the strings of config (not that define is
replacing only IDs - alphanumeric tokens not enclosed in quotes)
- #!subst offers an easy way to search and replace inside strings before
cfg parsing. E.g.,:
modparam("acc", "db_url",
"mysql://user:DBPASSWD@localhost/db")
- will do the substitution of db password in db_url parameter value
- number of allowed defines set to 256
- credits to Andrei for quick hints on ID defines
- notes:
- multilines defines are reduced to single line, so line counter
should be fine
- column counter goes inside the define value, but you have to omit
the \ and CR for the accurate inside-define position
---
cfg.lex | 137 +++++++++++++++++++++++++++++++++++++++++++++++++++++----------
cfg.y | 8 ++++
ppcfg.c | 116 +++++++++++++++++++++++++++++++++++++++++++++++++++++
ppcfg.h | 30 ++++++++++++++
4 files changed, 270 insertions(+), 21 deletions(-)
Diff:
http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commitdiff;h=20c…
23 Apr
23 Apr
6:25 p.m.
some lines starting with '#' where auto-stripped from git commit, so again:
>
cfg: extended preprocessor directives
- you can define values for IDs
#!define MYINT 123
#!define MYSTR "xyz"
- defined IDs are replaced at startup, during config parsing, e.g.,:
$var(x) = 100 + MYINT;
- is interpreted as:
$var(x) = 100 + 123;
- you can have multi-line defined IDs
#!define IDLOOP $var(i) = 0; \
while($var(i)<5) { \
xlog("++++ $var(i)\n"); \
$var(i) = $var(i) + 1; \
}
- then in routing block
route {
...
IDLOOP
...
}
- new preprocessor directive
#!subst "/regexp/subst/"
- perform substitutions inside the strings of config (note that define is
replacing only IDs - alphanumeric tokens not enclosed in quotes)
- #!subst offers an easy way to search and replace inside strings before
cfg parsing. E.g.,:
#!subst "/DBPASSWD/xyz/"
modparam("acc", "db_url",
"mysql://user:DBPASSWD@localhost/db")
- will do the substitution of db password in db_url parameter value
- number of allowed defines set to 256
- credits to Andrei for quick hints on ID defines
- notes:
- multilines defines are reduced to single line, so line counter
should be fine
- column counter goes inside the define value, but you have to omit
the \ and CR for the accurate inside-define position
On 4/24/10 12:18 AM, Daniel-Constantin Mierla wrote:
Module: sip-router
Branch: master
Commit: 20cddb28e968d8e0f79a7910d3cc83fa6f40887f
URL:
http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=20cddb2…
Author: Daniel-Constantin Mierla<miconda(a)gmail.com>
Committer: Daniel-Constantin Mierla<miconda(a)gmail.com>
Date: Fri Apr 23 23:58:43 2010 +0200
cfg: extended preprocessor directives
- you can define values for IDs
- defined IDs are replaced at startup, during config parsing, e.g.,:
$var(x) = 100 + MYINT;
- is interpreted as:
$var(x) = 100 + 123;
- you can have multi-line defined IDs
while($var(i)<5) { \
xlog("++++ $var(i)\n"); \
$var(i) = $var(i) + 1; \
}
- then in routing block
route {
...
IDLOOP
...
}
- new preprocessor directive
- perform substitutions inside the strings of config (not that define is
replacing only IDs - alphanumeric tokens not enclosed in quotes)
- #!subst offers an easy way to search and replace inside strings before
cfg parsing. E.g.,:
modparam("acc", "db_url",
"mysql://user:DBPASSWD@localhost/db")
- will do the substitution of db password in db_url parameter value
- number of allowed defines set to 256
- credits to Andrei for quick hints on ID defines
- notes:
- multilines defines are reduced to single line, so line counter
should be fine
- column counter goes inside the define value, but you have to omit
the \ and CR for the accurate inside-define position
---
cfg.lex | 137 +++++++++++++++++++++++++++++++++++++++++++++++++++++----------
cfg.y | 8 ++++
ppcfg.c | 116 +++++++++++++++++++++++++++++++++++++++++++++++++++++
ppcfg.h | 30 ++++++++++++++
4 files changed, 270 insertions(+), 21 deletions(-)
Diff:
http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commitdiff;h=20c…
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Daniel-Constantin Mierla
* http://www.asipto.com/
* http://twitter.com/miconda
* http://www.linkedin.com/in/danielconstantinmierla
24 Apr
24 Apr
4:29 a.m.
Daniel-Constantin Mierla writes:
- multilines defines are reduced to single line, so
line counter
should be fine
daniel,
it should be possible to place the defines in a separate file from the
main config file, which would thus not need to be changed, when some
constant values are changed.
the line numbers in error messages should match the ones of the main
config file. is this currently supported?
-- juha
25 Apr
25 Apr
9:05 a.m.
On 4/24/10 10:29 AM, Juha Heinanen wrote:
Daniel-Constantin Mierla writes:
the lines match even with defines, there is no issue with that. However,
there is include_file that you can use for a special file with defines.
http://www.kamailio.org/dokuwiki/doku.php/core-cookbook:3.0.x#include_file
Cheers,
Daniel
--
Daniel-Constantin Mierla
* http://www.asipto.com/
* http://twitter.com/miconda
* http://www.linkedin.com/in/danielconstantinmierla
- multilines defines are reduced to single line,
so line counter
should be fine
daniel,
it should be possible to place the defines in a separate file from the
main config file, which would thus not need to be changed, when some
constant values are changed.
the line numbers in error messages should match the ones of the main
config file. is this currently supported?
26 Apr
26 Apr
5:03 a.m.
nice, thanks
Am 24.04.2010 00:25, schrieb Daniel-Constantin Mierla:
some lines starting with '#' where
auto-stripped from git commit, so again:
>
cfg: extended preprocessor directives
- you can define values for IDs
#!define MYINT 123
#!define MYSTR "xyz"
- defined IDs are replaced at startup, during config parsing, e.g.,:
$var(x) = 100 + MYINT;
- is interpreted as:
$var(x) = 100 + 123;
- you can have multi-line defined IDs
#!define IDLOOP $var(i) = 0; \
while($var(i)<5) { \
xlog("++++ $var(i)\n"); \
$var(i) = $var(i) + 1; \
}
- then in routing block
route {
...
IDLOOP
...
}
- new preprocessor directive
#!subst "/regexp/subst/"
- perform substitutions inside the strings of config (note that define is
replacing only IDs - alphanumeric tokens not enclosed in quotes)
- #!subst offers an easy way to search and replace inside strings before
cfg parsing. E.g.,:
#!subst "/DBPASSWD/xyz/"
modparam("acc", "db_url",
"mysql://user:DBPASSWD@localhost/db")
- will do the substitution of db password in db_url parameter value
- number of allowed defines set to 256
- credits to Andrei for quick hints on ID defines
- notes:
- multilines defines are reduced to single line, so line counter
should be fine
- column counter goes inside the define value, but you have to omit
the \ and CR for the accurate inside-define position
On 4/24/10 12:18 AM, Daniel-Constantin Mierla wrote:
Module: sip-router
Branch: master
Commit: 20cddb28e968d8e0f79a7910d3cc83fa6f40887f
URL:
http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=20cddb2…
Author: Daniel-Constantin Mierla<miconda(a)gmail.com>
Committer: Daniel-Constantin Mierla<miconda(a)gmail.com>
Date: Fri Apr 23 23:58:43 2010 +0200
cfg: extended preprocessor directives
- you can define values for IDs
- defined IDs are replaced at startup, during config parsing, e.g.,:
$var(x) = 100 + MYINT;
- is interpreted as:
$var(x) = 100 + 123;
- you can have multi-line defined IDs
while($var(i)<5) { \
xlog("++++ $var(i)\n"); \
$var(i) = $var(i) + 1; \
}
- then in routing block
route {
...
IDLOOP
...
}
- new preprocessor directive
- perform substitutions inside the strings of config (not that define is
replacing only IDs - alphanumeric tokens not enclosed in quotes)
- #!subst offers an easy way to search and replace inside strings before
cfg parsing. E.g.,:
modparam("acc", "db_url",
"mysql://user:DBPASSWD@localhost/db")
- will do the substitution of db password in db_url parameter value
- number of allowed defines set to 256
- credits to Andrei for quick hints on ID defines
- notes:
- multilines defines are reduced to single line, so line counter
should be fine
- column counter goes inside the define value, but you have to omit
the \ and CR for the accurate inside-define position
---
cfg.lex | 137
+++++++++++++++++++++++++++++++++++++++++++++++++++++----------
cfg.y | 8 ++++
ppcfg.c | 116 +++++++++++++++++++++++++++++++++++++++++++++++++++++
ppcfg.h | 30 ++++++++++++++
4 files changed, 270 insertions(+), 21 deletions(-)
Diff:
http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commitdiff;h=20c…
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
5359
days inactive
5362
days old
4 comments
3 participants
participants (3)
-
Daniel-Constantin Mierla -
Juha Heinanen -
Klaus Darilion