THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task has a new comment added: FS#296 - tm:branch-failure event_route is not executed on all branch failures User who did this - Juha Heinanen (jh) ---------- i don't use append_branch and i don't have corex module in my config and thus cannot test with it. i tested a simpler case, where only $ru and $du are set similar to this: request_route { xlog("===== main route block\n"); $ru = "sip:foo@bar.com"; $du = "sip:127.0.0.1:9;transport=tcp"; t_on_failure("x"); t_on_branch_failure("x"); set_forward_no_connect(); t_relay(); $var(rc) = $rc; xlog("===== t relay return code: $rc\n"); exit; } and got: May 20 19:21:56 siika /usr/sbin/sip-proxy[20734]: INFO: activating failure and branch failure routes May 20 19:21:56 siika /usr/sbin/sip-proxy[20734]: ERROR: <core> [tcp_main.c:2781]: tcpconn_1st_send(): connect 127.0.0.1:9 failed (RST) Connection refused May 20 19:21:56 siika /usr/sbin/sip-proxy[20734]: ERROR: <core> [tcp_main.c:2791]: tcpconn_1st_send(): 127.0.0.1:9: connect & send for 0x7ff2f7b63030 failed: Connection refused (111) May 20 19:21:56 siika /usr/sbin/sip-proxy[20734]: ERROR: tm [../../forward.h:216]: msg_send(): msg_send: ERROR: tcp_send failed May 20 19:21:56 siika /usr/sbin/sip-proxy[20734]: ERROR: tm [t_fwd.c:1592]: t_send_branch(): ERROR: t_send_branch: sending request on branch 0 failed May 20 19:21:56 siika /usr/sbin/sip-proxy[20734]: ERROR: tm [t_fwd.c:1595]: t_send_branch(): putting branch 0 on hold May 20 19:21:56 siika /usr/sbin/sip-proxy[20734]: INFO: t_relay() failed can you test with the above simpler config and see what you get? ---------- More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=296#comment8… You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.