THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task has a new comment added: FS#241 - Incorrect outbound interface used in Via and Record-Route User who did this - Hugh Waite (hugh.waite) ---------- To explain the attached trace: This trace is taken on a 'load-balancer' server. Clients send all traffic to this virtual IP address, but it is handled by another server which sends the traffic back to the LB. The load balancer has 2 interfaces eth0 and eth1 and there is a client on each interface. The main servers are all on the first network. The call flow is therefore: Client A - (192.168.0.185) Load balancer - (192.168.0.75 advertised) SIP router - (192.168.0.63) Load balancer - (192.168.0.75 / 192.168.10.75 advertised) Client B - (192.168.10.23) ---------- More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=241#comment7… You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.