### Description Explain what you did, what you expected to happen, and what actually happened. I'm looking at using presence module with **subs_db_mode** parameter set to 0-2 where it uses memory to store and query active watchers. I noticed that sometimes Kamailio will throw following message during PUBLISH processesing and it will not generate appropriate NOTIFY for watchers: `DEBUG: presence [notify.c:1234]: publ_notify(): Could not find subs_dialog ` RPC command to dump current active watchers will be helpful during troubleshooting. Currently with **subs_db_mode** set to 0 you can not tell for sure if subsciption already expired or not. And with **subs_db_mode** set to 1 or 2 you can get information from DB with delay. This command will also allow to clarify subscriber _domain_ value which if I understood correctly must match domain from presentity. Thanks a lot! -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2188