sr-dev May 2025

sr-dev@lists.kamailio.org

15 participants
200 discussions

[kamailio/kamailio] [Websocket] websocket:closed sometimes is not fired (Issue #3950)
by Gustavo Almeida 27 Jun '25

27 Jun '25

### Description After carrying out some load tests using the `Websocket` module, I noticed that sometimes the `websocket:closed` event is not triggered. This problem seems to be particularly noticeable when the load is high and simultaneous. Example: 1000 records simultaneously. In the tests carried out, I realized that the number of times the event is not triggered is small, in the order of [1-10]/1000. I check that when I do a `ws.dump` I don't have any active connections, and I confirm that they are all effectively cleaned (`netstat -ano | grep 8061`). However, the event is not triggered for some connections. I can see this in the logs, and also when i display the content of an hash table, i'm dropping key inside `websocket:closed` event. ### Troubleshooting The troubleshooting was simplistic, i.e. I ran the same test n times, and validated that the event was triggered for all connections, the number of `ws` connections listed by `Kamailio`, and the open connections. #### Reproduction To reproduce, we can use any mechanism that emulates the use of the `Websocket` module. For example, I used the `sipexer` tool to create a `wss` connection with `Kamailio`, forcing simultaneous registrations. Example command: `sipexer -cb -mt register -ex 60 -au <user> -ap <pass> -fuser example -fd mydomain -wso https://10.0.0.12:10000 -ruri sip:kamailio -su wss://kamailio:8061` Kamailio TLS listener: `listen=tls:10.0.0.12:8061 advertise PUBLIC_IP` Websocket module: ``` loadmodule "websocket.so" tcp_accept_no_cl=yes ``` ``` event_route[websocket:closed] { xlog("L_NOTICE", "WebSocket connection closed $proto:$si:$sp\n"); <I also delete where a htable key> } ``` #### Debugging Data ``` [root@ ~]$ prcmd ws.dump { connections: { } info: { wscounter: 0 truncated: no } } [root@ ~]$ netstat -ano | grep 8061 tcp 0 0 10.0.0.12:8061 0.0.0.0:* LISTEN off (0.00/0/0) [root ~]$ prcmd htable.dump wsauth | grep "name" | wc -l 3 [root ~]$ cat /var/log/kamailio.log | grep "WebSocket connection closed" | wc -l 997 [root ~]$ cat /var/log/proxy-registrar/proxy-registrar.log | grep "ERR" | grep "WAR" | wc -l 0 ``` #### Log Messages Nothing relevant. #### SIP Traffic Nothing relevant here, the SIP Flow is OK. ### Additional Information ``` version: kamailio 5.6.4 (x86_64/linux) a004cf-dirty flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: a004cf -dirty compiled on 23:17:27 Jun 7 2024 with gcc 4.8.5 ``` * **Operating System**: ``` CentOS Linux release 7.9.2009 (Core) ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3950 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3950(a)github.com>

6 7

[kamailio/kamailio] tcp_main : Crash on local_timer_list_expire (Issue #4238)
by ctylihuai 27 Jun '25

27 Jun '25

ctylihuai created an issue (kamailio/kamailio#4238) ### Description The Kamailio “P” node responsible for 5G messaging encountered an unhandled exception and generated a core dump during operation . This node had been continuously running for over one month (34 days) without any issues, and the failure occurred only once . As of now, no reproducible steps have been identified to trigger the problem again ### Troubleshooting #### Reproduction It cannot be reproduced for the time being #### Debugging Data ``` (gdb) bt full #0 0x0000aaaac25ffd10 in local_timer_list_expire (l=0xaaaac29ef340 <tcp_main_ltimer>, t=1691001057, h=0xaaaac2a10158 <tcp_main_ltimer+134680>) at core/local_timer.c:193 tl = 0xaaaac2a7b528 <tcp_reader_ltimer+197384> ret = 0 #1 0x0000aaaac25ffe98 in local_timer_expire (h=0xaaaac29ef340 <tcp_main_ltimer>, t=1691001057) at core/local_timer.c:222 No locals. #2 0x0000aaaac260031c in local_timer_run (lt=0xaaaac29ef340 <tcp_main_ltimer>, saved_ticks=1691001057) at core/local_timer.c:245 __func__ = "local_timer_run" #3 0x0000aaaac2552bec in tcp_timer_run () at core/tcp_main.c:4875 ticks = 1691001057 #4 0x0000aaaac2555074 in tcp_main_loop () at core/tcp_main.c:5060 si = 0x0 r = 48 __func__ = "tcp_main_loop" #5 0x0000aaaac23d24b0 in main_loop () at main.c:1945 i = 48 pid = 0 si = 0x0 si_desc = "udp receiver child=47 sock=10.185.16.12:5060\000\000\000\000\000\027\065\215sw\247\235\060\346\256\310\377\377\000\000|\312p\302\252\252\000\000@\346\256\310\377\377\000\000\000\263\252\302\252\252\000\000\200\346\256\310\377\377\000\000\n\000\000\000\000\000\000\000\200\346\256\310\377\377\000\000\250\345=\302\252\252\000\000\200\346\256\310\377\377\000" nrprocs = 48 woneinit = 1 __func__ = "main_loop" #6 0x0000aaaac23de5f4 in main (argc=19, argv=0xffffc8aeebe8) at main.c:3212 cfg_stream = 0xaaaafeb0d260 c = -1 r = 0 tmp = 0xffffc8aefe85 "" tmp_len = -1484867064 port = 65535 proto = -1487420584 ahost = 0x0 aport = 0 options = 0xaaaac28ec2a0 ":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:x:X:Y:" ret = -1 seed = 3762187974 rfd = 4 debug_save = 0 debug_flag = 0 dont_fork_cnt = 2 ---Type <return> to continue, or q <return> to quit--- n_lst = 0xffffc8aee8f8 p = 0x0 st = {st_dev = 64772, st_ino = 4298835, st_mode = 16877, st_nlink = 2, st_uid = 103, st_gid = 105, st_rdev = 0, __pad1 = 0, st_size = 6, st_blksize = 4096, __pad2 = 0, st_blocks = 0, st_atim = { tv_sec = 0, tv_nsec = 0}, st_mtim = {tv_sec = 1733885384, tv_nsec = 0}, st_ctim = {tv_sec = 1737443001, tv_nsec = 2493470}, __glibc_reserved = {0, 0}} tbuf = "\210\351\256\310\377\377\000\000\204\351\256\310\377\377\000\000\002\b \200\002\b \200\260\351\256\310\377\377\000\000\234\303~\247\377\377\000\000\230e;\330\000\000\000\000\310*\201\247\377\377\000\000\330\fi\247\377\377\000\000\310\352\256\310\377\377\000\000\070\353\256\310\377\377\000\000\000\000\000\000\000\000\000\000@'\201\247\377\377\000\000\000\000\000\000\000\000\000\000X\352\256\310\377\377\000\000h\352\256\310\377\377\000\000\001", '\000' <repeats 15 times>, "\230e;\330\000\000\000\000h'\201\247\377\377\000\000\000\000\000\000\000\000\000\000X\352\256\310\377\377\000\000h\352\256\310\377\377\000\000\320\352\256\310\377\377\000\000\330\fi\247\377\377\000\000\210\351\256\310\377\377\000\000"... option_index = 12 long_options = {{name = 0xaaaac28ee678 "help", has_arg = 0, flag = 0x0, val = 104}, {name = 0xaaaac28e9410 "version", has_arg = 0, flag = 0x0, val = 118}, {name = 0xaaaac28ee680 "alias", has_arg = 1, flag = 0x0, val = 1024}, {name = 0xaaaac28ee688 "subst", has_arg = 1, flag = 0x0, val = 1025}, {name = 0xaaaac28ee690 "substdef", has_arg = 1, flag = 0x0, val = 1026}, { name = 0xaaaac28ee6a0 "substdefs", has_arg = 1, flag = 0x0, val = 1027}, {name = 0xaaaac28ee6b0 "server-id", has_arg = 1, flag = 0x0, val = 1028}, {name = 0xaaaac28ee6c0 "loadmodule", has_arg = 1, flag = 0x0, val = 1029}, {name = 0xaaaac28ee6d0 "modparam", has_arg = 1, flag = 0x0, val = 1030}, {name = 0xaaaac28ee6e0 "log-engine", has_arg = 1, flag = 0x0, val = 1031}, { name = 0xaaaac28ee6f0 "debug", has_arg = 1, flag = 0x0, val = 1032}, {name = 0xaaaac28ee6f8 "cfg-print", has_arg = 0, flag = 0x0, val = 1033}, {name = 0xaaaac28ee708 "atexit", has_arg = 1, flag = 0x0, val = 1034}, {name = 0xaaaac28ee710 "all-errors", has_arg = 0, flag = 0x0, val = 1035}, {name = 0x0, has_arg = 0, flag = 0x0, val = 0}} __func__ = "main" (gdb) p tl $30 = (struct timer_ln *) 0xaaaac2a7b528 <tcp_reader_ltimer+197384> (gdb) p *tl $31 = {next = 0x0, prev = 0xaaaac2a10158 <tcp_main_ltimer+134680>, expire = 0, initial_timeout = 0, data = 0x0, f = 0x0, flags = 0, slow_idx = 0} (gdb) p *h $10 = {next = 0x0, prev = 0xfff8adcef5d8} 循环打印 h->prev内容 $177 = (struct timer_ln *) 0xaaaac2a10158 <tcp_main_ltimer+134680> next = 0x0, prev = 0xfff8adcef5d8 $178 = (struct timer_ln * volatile) 0xfff8adcef5d8 next = 0xaaaac2a10158 <tcp_main_ltimer+134680>, prev = 0xfff9437ede60 $179 = (struct timer_ln *) 0xfff9437ede60 next = 0xfff8adcef5d8, prev = 0xfffa58c31970 $180 = (struct timer_ln *) 0xfffa58c31970 next = 0xfff9437ede60, prev = 0xaaaac2a1bd48 $181 = (struct timer_ln *) 0xaaaac2a1bd48 <tcp_main_ltimer+182792> next = 0xfffa58c31970, prev = 0xfffa53da92a8 $182 = (struct timer_ln *) 0xfffa53da92a8 next = 0xaaaac2a1bd48 <tcp_main_ltimer+182792>, prev = 0xfff96e22e0e0 $183 = (struct timer_ln *) 0xfff96e22e0e0 next = 0xfffa53da92a8, prev = 0xfffa4f642a28 $184 = (struct timer_ln *) 0xfffa4f642a28 next = 0xfff96e22e0e0, prev = 0xfff880261368 $185 = (struct timer_ln *) 0xfff880261368 next = 0xfffa4f642a28, prev = 0xfff99e55db30 $186 = (struct timer_ln *) 0xfff99e55db30 next = 0xfff880261368, prev = 0xfff99fe12eb0 $187 = (struct timer_ln *) 0xfff99fe12eb0 next = 0xfff99e55db30, prev = 0xfffa7f14dfa8 $188 = (struct timer_ln *) 0xfffa7f14dfa8 next = 0xfff99fe12eb0, prev = 0xaaaac2a21658 <tcp_main_ltimer+205592 $189 = (struct timer_ln *) 0xaaaac2a21658 <tcp_main_ltimer+205592> next = 0xfffa7f14dfa8, prev = 0xfff82902dfb8 $190 = (struct timer_ln *) 0xfff82902dfb8 next = 0xaaaac2a21658 <tcp_main_ltimer+205592>, prev = 0xfffa3728f340 $191 = (struct timer_ln *) 0xfffa3728f340 next = 0xfff82902dfb8, prev = 0xfff8f0b5ec40 $192 = (struct timer_ln *) 0xfff8f0b5ec40 next = 0xfffa3728f340, prev = 0xfffaa900c338 $193 = (struct timer_ln *) 0xfffaa900c338 next = 0xfff8f0b5ec40, prev = 0xfff888f53088 $194 = (struct timer_ln *) 0xfff888f53088 next = 0xfffaa900c338, prev = 0xfff79d06ff60 $195 = (struct timer_ln *) 0xfff79d06ff60 next = 0xfff888f53088, prev = 0xfff8eea80ff8 $196 = (struct timer_ln *) 0xfff8eea80ff8 next = 0xfffa38e4f870, prev = 0xfff83d1a6a18 $197 = (struct timer_ln *) 0xfff83d1a6a18 next = 0xfff8eea80ff8, prev = 0xfffa5c69fb48 $198 = (struct timer_ln *) 0xfffa5c69fb48 next = 0xfff83d1a6a18, prev = 0xfff8b5c31c58 $199 = (struct timer_ln *) 0xfff8b5c31c58 next = 0xfffa5c69fb48, prev = 0xfff9a4ac6688 $200 = (struct timer_ln *) 0xfff9a4ac6688 next = 0xfff8b5c31c58, prev = 0xfff9e3ee0200 $201 = (struct timer_ln *) 0xfff9e3ee0200 next = 0xfff9a4ac6688, prev = 0xaaaac2a267b8 $202 = (struct timer_ln *) 0xaaaac2a267b8 <tcp_main_ltimer+226424> next = 0xfff9e3ee0200, prev = 0xfff9b6b00188 $203 = (struct timer_ln *) 0xfff9b6b00188 next = 0xaaaac2a267b8 <tcp_main_ltimer+226424>, prev = 0xfffa38e4f870 $204 = (struct timer_ln *) 0xfffa38e4f870 next = 0xfff9b6b00188, prev = 0xfff8eea80ff8 $205 = (struct timer_ln *) 0xfff8eea80ff8 next = 0xfffa38e4f870, prev = 0xfff83d1a6a18 $206 = (struct timer_ln *) 0xfff83d1a6a18 next = 0xfff8eea80ff8, prev = 0xfffa5c69fb48 $207 = (struct timer_ln *) 0xfffa5c69fb48 next = 0xfff83d1a6a18, prev = 0xfff8b5c31c58 $208 = (struct timer_ln *) 0xfff8b5c31c58 next = 0xfffa5c69fb48, prev = 0xfff9a4ac6688 $209 = (struct timer_ln *) 0xfff9a4ac6688 next = 0xfff8b5c31c58, prev = 0xfff9e3ee0200 $210 = (struct timer_ln *) 0xfff9e3ee0200 next = 0xfff9a4ac6688, prev = 0xaaaac2a267b8 <tcp_main_ltimer+226424> $211 = (struct timer_ln *) 0xaaaac2a267b8 <tcp_main_ltimer+226424> next = 0xfff9e3ee0200, prev = 0xfff9b6b00188 $212 = (struct timer_ln *) 0xfff9b6b00188 next = 0xaaaac2a267b8 <tcp_main_ltimer+226424>, prev = 0xfffa38e4f870 $213 = (struct timer_ln *) 0xfffa38e4f870 next = 0xfff9b6b00188, prev = 0xfff8eea80ff8 (gdb) set $node = h->prev (gdb) while ($node != 0) >print *$node >set $node = $node->prev >end $50 = {next = 0xaaaac2a10158 <tcp_main_ltimer+134680>, prev = 0xfff9437ede60, expire = 1691004064, initial_timeout = 5760, data = 0xfff8adcef430, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $51 = {next = 0xfff8adcef5d8, prev = 0xfffa58c31970, expire = 1691004064, initial_timeout = 5760, data = 0xfff9437edcb8, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $52 = {next = 0xfff9437ede60, prev = 0xaaaac2a1bd48 <tcp_main_ltimer+182792>, expire = 1691004064, initial_timeout = 5760, data = 0xfffa58c317c8, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $53 = {next = 0xfffa58c31970, prev = 0xfffa53da92a8, expire = 3125221032, initial_timeout = 65529, data = 0xfffa51099620, f = 0xfff7f9d36838, flags = 4191381560, slow_idx = 65527} $54 = {next = 0xaaaac2a1bd48 <tcp_main_ltimer+182792>, prev = 0xfff96e22e0e0, expire = 1691004064, initial_timeout = 5760, data = 0xfffa53da9100, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $55 = {next = 0xfffa53da92a8, prev = 0xfffa4f642a28, expire = 1691004064, initial_timeout = 5760, data = 0xfff96e22df38, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $56 = {next = 0xfff96e22e0e0, prev = 0xfff880261368, expire = 1691004064, initial_timeout = 5760, data = 0xfffa4f642880, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $57 = {next = 0xfffa4f642a28, prev = 0xfff99e55db30, expire = 1691005489, initial_timeout = 5760, data = 0xfff8802611c0, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $58 = {next = 0xfff880261368, prev = 0xfff99fe12eb0, expire = 1691005489, initial_timeout = 5760, data = 0xfff99e55d988, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $59 = {next = 0xfff99e55db30, prev = 0xfffa7f14dfa8, expire = 1691005489, initial_timeout = 5760, data = 0xfff99fe12d08, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $60 = {next = 0xfff99fe12eb0, prev = 0xaaaac2a21658 <tcp_main_ltimer+205592>, expire = 1691005489, initial_timeout = 5760, data = 0xfffa7f14de00, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $61 = {next = 0xfffa7f14dfa8, prev = 0xfff82902dfb8, expire = 888530032, initial_timeout = 65528, data = 0xfff81b870028, f = 0xfff798f80cc0, flags = 522077992, slow_idx = 65529} $62 = {next = 0xaaaac2a21658 <tcp_main_ltimer+205592>, prev = 0xfffa3728f340, expire = 1691005489, initial_timeout = 5760, data = 0xfff82902de10, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $63 = {next = 0xfff82902dfb8, prev = 0xfff8f0b5ec40, expire = 1691005489, initial_timeout = 5760, data = 0xfffa3728f198, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $64 = {next = 0xfffa3728f340, prev = 0xfffaa900c338, expire = 1691005489, initial_timeout = 5760, data = 0xfff8f0b5ea98, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $65 = {next = 0xfff8f0b5ec40, prev = 0xfff888f53088, expire = 1691005489, initial_timeout = 5760, data = 0xfffaa900c190, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $66 = {next = 0xfffaa900c338, prev = 0xfff79d06ff60, expire = 1691005489, initial_timeout = 5760, data = 0xfff888f52ee0, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $67 = {next = 0xfff888f53088, prev = 0xfff8eea80ff8, expire = 1691005489, initial_timeout = 5760, data = 0xfff79d06fdb8, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $68 = {next = 0xfffa38e4f870, prev = 0xfff83d1a6a18, expire = 1691006791, initial_timeout = 5760, data = 0xfff8eea80e50, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $69 = {next = 0xfff8eea80ff8, prev = 0xfffa5c69fb48, expire = 1691006791, initial_timeout = 5760, data = 0xfff83d1a6870, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $70 = {next = 0xfff83d1a6a18, prev = 0xfff8b5c31c58, expire = 1691006791, initial_timeout = 5760, data = 0xfffa5c69f9a0, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $71 = {next = 0xfffa5c69fb48, prev = 0xfff9a4ac6688, expire = 1691006791, initial_timeout = 5760, data = 0xfff8b5c31ab0, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $72 = {next = 0xfff8b5c31c58, prev = 0xfff9e3ee0200, expire = 1691006791, initial_timeout = 5760, data = 0xfff9a4ac64e0, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $73 = {next = 0xfff9a4ac6688, prev = 0xaaaac2a267b8 <tcp_main_ltimer+226424>, expire = 1691006791, initial_timeout = 5760, data = 0xfff9e3ee0058, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $74 = {next = 0xfff9e3ee0200, prev = 0xfff9b6b00188, expire = 1429254648, initial_timeout = 65528, data = 0xfff88564eb80, f = 0xfff9cc7da958, flags = 881566008, slow_idx = 65529} $75 = {next = 0xaaaac2a267b8 <tcp_main_ltimer+226424>, prev = 0xfffa38e4f870, expire = 1691006791, initial_timeout = 5760, data = 0xfff9b6afffe0, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $76 = {next = 0xfff9b6b00188, prev = 0xfff8eea80ff8, expire = 1691006791, initial_timeout = 5760, data = 0xfffa38e4f6c8, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $77 = {next = 0xfffa38e4f870, prev = 0xfff83d1a6a18, expire = 1691006791, initial_timeout = 5760, data = 0xfff8eea80e50, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $78 = {next = 0xfff8eea80ff8, prev = 0xfffa5c69fb48, expire = 1691006791, initial_timeout = 5760, data = 0xfff83d1a6870, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $79 = {next = 0xfff83d1a6a18, prev = 0xfff8b5c31c58, expire = 1691006791, initial_timeout = 5760, data = 0xfffa5c69f9a0, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $80 = {next = 0xfffa5c69fb48, prev = 0xfff9a4ac6688, expire = 1691006791, initial_timeout = 5760, data = 0xfff8b5c31ab0, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $81 = {next = 0xfff8b5c31c58, prev = 0xfff9e3ee0200, expire = 1691006791, initial_timeout = 5760, data = 0xfff9a4ac64e0, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} ---Type <return> to continue, or q <return> to quit--- $82 = {next = 0xfff9a4ac6688, prev = 0xaaaac2a267b8 <tcp_main_ltimer+226424>, expire = 1691006791, initial_timeout = 5760, data = 0xfff9e3ee0058, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} $83 = {next = 0xfff9e3ee0200, prev = 0xfff9b6b00188, expire = 1429254648, initial_timeout = 65528, data = 0xfff88564eb80, f = 0xfff9cc7da958, flags = 881566008, slow_idx = 65529} $84 = {next = 0xaaaac2a267b8 <tcp_main_ltimer+226424>, prev = 0xfffa38e4f870, expire = 1691006791, initial_timeout = 5760, data = 0xfff9b6afffe0, f = 0xaaaac2551690 <tcpconn_main_timeout>, flags = 512, slow_idx = 0} ``` #### Log Messages ``` 2025-05-02T05:39:54.151913300Z 84(131) ERROR: <core> [core/tcp_read.c:297]: tcp_read_data(): error reading: Connection timed out (110) ([49.69.41.98]:36121 ->84(131) ERROR: <core> [core/tcp_read.c:299]: tcp_read_data(): -> [10.185.18.67]:5260) 2025-05-02T05:39:54.152035620Z 84(131) ERROR: <core> [core/tcp_read.c:1556]: tcp_read_req(): ERROR: tcp_read_req: error reading - c: 0xfff7cd0a8ba0 r: 0xfff7cd0a8cc8 (-1) 2025-05-02T05:39:54.152046140Z 84(131) ERROR: <core> [core/tcp_read.c:297]: tcp_read_data(): error reading: Connection timed out (110) ([110.252.23.203]:27380 ->84(131) ERROR: <core> [core/tcp_read.c:299]: tcp_read_data(): -> [10.185.18.67]:5260) 2025-05-02T05:39:54.152053220Z 84(131) ERROR: <core> [core/tcp_read.c:1556]: tcp_read_req(): ERROR: tcp_read_req: error reading - c: 0xfff9a1658f08 r: 0xfff9a1659030 (-1) 2025-05-02T05:39:54.152067100Z 84(131) ERROR: <core> [core/tcp_read.c:297]: tcp_read_data(): error reading: Connection timed out (110) ([240e:440:1b18:1fb3:22:da32:6be9:33e7]:50529 ->84(131) ERROR: <core> [core/tcp_read.c:299]: tcp_read_data(): -> [240e:954:2000:208::31]:5460) 2025-05-02T05:39:54.152468020Z 90(137) ERROR: <core> [core/tcp_read.c:297]: tcp_read_data(): error reading: Connection timed out (110) ([124.236.136.161]:13636 ->90(137) ERROR: <core> [core/tcp_read.c:299]: tcp_read_data(): -> [10.185.18.67]:5260) 2025-05-02T05:39:54.152535370Z 87(134) ERROR: <core> [core/tcp_read.c:297]: tcp_read_data(): error reading: Connection timed out (110) ([111.61.229.67]:41796 ->87(134) ERROR: <core> [core/tcp_read.c:299]: tcp_read_data(): -> [10.185.18.67]:5260) 2025-05-02T05:39:54.152895350Z 84(131) ERROR: <core> [core/tcp_read.c:1556]: tcp_read_req(): ERROR: tcp_read_req: error reading - c: 0xfffa8d174330 r: 0xfffa8d174458 (-1) 2025-05-02T05:39:54.152916500Z 84(131) ERROR: <core> [core/tcp_read.c:297]: tcp_read_data(): error reading: Connection timed out (110) ([240e:440:9a08:24:1444:71da:9ff4:a6e6]:57851 ->84(131) ERROR: <core> [core/tcp_read.c:299]: tcp_read_data(): -> [240e:954:2000:208::31]:5460) 2025-05-02T05:39:54.153179200Z 90(137) ERROR: <core> [core/tcp_read.c:1556]: tcp_read_req(): ERROR: tcp_read_req: error reading - c: 0xfffa45cedc18 r: 0xfffa45cedd40 (-1) 2025-05-02T05:39:54.153425390Z 87(134) ERROR: <core> [core/tcp_read.c:1556]: tcp_read_req(): ERROR: tcp_read_req: error reading - c: 0xfffa22771e70 r: 0xfffa22771f98 (-1) 2025-05-02T05:39:54.153520770Z 84(131) ERROR: <core> [core/tcp_read.c:1556]: tcp_read_req(): ERROR: tcp_read_req: error reading - c: 0xfff83da65638 r: 0xfff83da65760 (-1) 2025-05-02T05:39:54.153540580Z 84(131) ERROR: <core> [core/tcp_read.c:297]: tcp_read_data(): error reading: Connection timed out (110) ([2408:8431:6810:2e2:1cbb:1c9e:63e6:abf1]:61717 ->84(131) ERROR: <core> [core/tcp_read.c:299]: tcp_read_data(): -> [240e:954:2000:208::31]:5260) 2025-05-02T05:39:54.154460230Z 84(131) ERROR: <core> [core/tcp_read.c:1556]: tcp_read_req(): ERROR: tcp_read_req: error reading - c: 0xfff7ccf40938 r: 0xfff7ccf40a60 (-1) 2025-05-02T05:39:54.154502480Z 84(131) ERROR: <core> [core/tcp_read.c:297]: tcp_read_data(): error reading: Connection timed out (110) ([123.182.115.202]:21533 ->84(131) ERROR: <core> [core/tcp_read.c:299]: tcp_read_data(): -> [10.185.18.67]:5260) 2025-05-02T05:39:54.154629490Z 84(131) ERROR: <core> [core/tcp_read.c:1556]: tcp_read_req(): ERROR: tcp_read_req: error reading - c: 0xfff89ae41378 r: 0xfff89ae414a0 (-1) 2025-05-02T05:39:54.154649140Z 84(131) ERROR: <core> [core/tcp_read.c:297]: tcp_read_data(): error reading: Connection timed out (110) ([183.199.201.13]:3125 ->84(131) ERROR: <core> [core/tcp_read.c:299]: tcp_read_data(): -> [10.185.18.67]:5260) 2025-05-02T05:39:54.154830180Z 84(131) ERROR: <core> [core/tcp_read.c:1556]: tcp_read_req(): ERROR: tcp_read_req: error reading - c: 0xfff9acc5d970 r: 0xfff9acc5da98 (-1) 2025-05-02T05:39:54.173624940Z 90(137) ERROR: <core> [core/tcp_read.c:1556]: tcp_read_req(): ERROR: tcp_read_req: error reading - c: 0xfff7de186590 r: 0xfff7de1866b8 (-1) 2025-05-02T05:39:54.325541260Z 117(164) ERROR: <core> [core/tcp_read.c:297]: tcp_read_data(): error reading: Connection reset by peer (104) ([171.114.149.119]:18629 ->117(164) ERROR: <core> [core/tcp_read.c:299]: tcp_read_data(): -> [10.185.18.67]:5260) 2025-05-02T05:39:54.325597230Z 117(164) ERROR: <core> [core/tcp_read.c:1556]: tcp_read_req(): ERROR: tcp_read_req: error reading - c: 0xfff83556b7e0 r: 0xfff83556b908 (-1) 2025-05-02T05:39:54.395159000Z 41(88) ERROR: <core> [core/tcp_main.c:1406]: tcp_do_connect(): connect 183.198.156.45:1272 failed Cannot assign requested address 2025-05-02T05:39:54.395211960Z 41(88) ERROR: <core> [core/tcp_main.c:1409]: tcp_do_connect(): connect 183.198.156.45:1272: (99) Cannot assign requested address 2025-05-02T05:39:54.395220020Z 41(88) ERROR: <core> [core/tcp_main.c:1545]: tcpconn_finish_connect(): 183.198.156.45:1272: tcp_do_connect for 0xfff95f7037e0 failed 2025-05-02T05:39:54.395226280Z 41(88) ERROR: <core> [core/tcp_main.c:2200]: tcp_send(): 183.198.156.45:1272: tcpconn_finish_connect(0xfff95f7037e0) failed 2025-05-02T05:39:54.395232270Z 41(88) ERROR: tm [../../core/forward.h:290]: msg_send_buffer(): tcp_send failed 2025-05-02T05:39:54.395337640Z 41(88) ERROR: sl [sl_funcs.c:415]: sl_reply_error(): stateless error reply used: Unfortunately error on sending to next hop occurred (477/SL) 2025-05-02T05:39:54.484799620Z 19(66) ERROR: <core> [core/tcp_main.c:1406]: tcp_do_connect(): connect 1.202.124.130:54952 failed Cannot assign requested address 2025-05-02T05:39:54.484847710Z 19(66) ERROR: <core> [core/tcp_main.c:1409]: tcp_do_connect(): connect 1.202.124.130:54952: (99) Cannot assign requested address 2025-05-02T05:39:54.484882280Z 19(66) ERROR: <core> [core/tcp_main.c:1545]: tcpconn_finish_connect(): 1.202.124.130:54952: tcp_do_connect for 0xfff9c7c0d500 failed 2025-05-02T05:39:54.484889320Z 19(66) ERROR: <core> [core/tcp_main.c:2200]: tcp_send(): 1.202.124.130:54952: tcpconn_finish_connect(0xfff9c7c0d500) failed 2025-05-02T05:39:54.484894930Z 19(66) ERROR: tm [../../core/forward.h:260]: msg_send_buffer(): tcp_send failed 2025-05-02T05:39:54.484899790Z 19(66) ERROR: sl [sl_funcs.c:415]: sl_reply_error(): stateless error reply used: Unfortunately error on sending to next hop occurred (477/SL) 2025-05-02T05:39:54.759458370Z 118(165) CRITICAL: <core> [core/io_wait.h:594]: io_watch_del(): invalid fd 69, not in [0, 0) 2025-05-02T05:39:54.759506810Z 118(165) ERROR: <core> [core/tcp_read.c:1765]: tcpconn_read_timeout(): io_watch_del failed for 0xfff80ff7f860 id 65244425 fd 69, state 0, flags c018, main fd 48347 ([240e::31]:63566 -> [240e::31]:5460) note：[240e::31] is the service address of kamailio, hiding the real IP address . ``` ### Possible Solutions ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.7.4 (x86_64/linux) fdc771 ``` * **Operating System**:  ``` OpenEuler 22.03 Linux localhost.localdomain 5.10.0-136.12.0.86.ctl3.x86_64 #1 SMP Fri Jan 13 08:18:12 UTC 2023 x86_64 x86_64 x86_64 GNU/Linux ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/4238 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/4238(a)github.com>

3 11

[kamailio/kamailio] If fix_nated_contact is used, then remove_hf("Contact"), the contact header will not be deleted cleanly. (Issue #4190)
by QuincyGao 24 Jun '25

24 Jun '25

QuincyGao created an issue (kamailio/kamailio#4190)  ### Description  I want to use opensips as SBC, When the agent registers to kamailio, the contact content is modified to the ip and port of kamailio, and then Register is forwarded to the agent. remove_hf("Contact") can't remove the whole Contact( field, vlue). here is my config: ``` route[REGISTRAR] { if (!is_method("REGISTER")) return; if(isflagset(FLT_NATS)) { setbflag(FLB_NATB); #!ifdef WITH_NATSIPPING # do SIP NAT pinging setbflag(FLB_NATSIPPING); #!endif } fix_nated_contact(); if (!save("location","0x02")) { #if (!save("location")) { sl_reply_error(); } $fs="udp:172.16.4.111:5461"; $du="sip:172.16.4.114:5060"; remove_hf("Contact"); $var(contact) = "Contact: <sip:" +$fU+"@"+"172.16.4.111:5461>;expires=120\r\n" ; append_hf("$var(contact)"); route(RELAY); exit; } ``` here is the sip message: ``` 2025/03/26 16:36:07.706093 172.16.4.111:5461 -> 172.16.4.114:5060 REGISTER sip:172.16.4.111:5460 SIP/2.0 Via: SIP/2.0/UDP 172.16.4.111:5461;branch=z9hG4bKfc7e.d2df36f3b5681afeb71e442e645de38d.0 Via: SIP/2.0/UDP 172.16.80.3:49309;received=172.16.80.3;rport=49309;branch=z9hG4bKPj8ab8bd1d3c3a4c1bb0cd639540fa3183 Max-Forwards: 69 From: <sip:1008@172.16.4.111>;tag=95f7f5601f8b40458a1efe6923ab0a29 To: <sip:1008@172.16.4.111> Call-ID: f84b643f5d284d18a0d8175e1ef4d747 CSeq: 33264 REGISTER User-Agent: MicroSIP/3.21.6 sip:1008@172.16.80.3:49309;obExpires: 120 Allow: PRACK, INVITE, ACK, BYE, CANCEL, UPDATE, INFO, SUBSCRIBE, NOTIFY, REFER, MESSAGE, OPTIONS Content-Length: 0 Contact: <sip:1008@172.16.4.111:5461>;expires=120 ``` you can see the problem is that: `sip:1008@172.16.80.3:49309;obExpires: 120` , `sip:1008@172.16.80.3:49309` is the value of the Contact field after fix_nated_contact(). ### Troubleshooting #### Reproduction  #### Debugging Data  ``` (paste your debugging data here) ``` #### Log Messages  ``` (paste your log messages here) ``` #### SIP Traffic  ``` (paste your sip traffic here) ``` ### Possible Solutions  ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.8.5 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, MEM_JOIN_FREE, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_SEND_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: compiled on 11:27:01 Mar 21 2025 with gcc 4.8.5 ``` * **Operating System**:  ``` Centos7.9 ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/4190 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/4190(a)github.com>

2 4

[kamailio/kamailio] Writing to $fU or $tU appends to header user (Issue #3165)
by Benoît Panizzon 24 Jun '25

24 Jun '25

Dear Gang Possibly @oej could provide more in-depth information as he has witnessed this issue. Usually the user of the from URI is the phone number displayed at the destination. There are situations where this phone number is translated. As example. In Switzerland, the user is used to see numbers in a local format. National number starting with 0 and international numbers with 00 but on interconnection between telcos, e164 is used. So basically when a call is sent to a customer '+41' is replaced by '0' and '+' is replaced by '00'. Let's start with an example From: header: `From: "Maurice Moss" <sip:+41991234567@example.com>;user=phone` So shortly before the call is sent out to the location of the registered CPE, this is done: ``` if ($fU =~ "^\+41") { $fU = "0" + $(fU{s.substr,3,0}); } else if ($fU = ~ "^\+") { $fU = "00" + $(fU{s.substr,1,0}); } ``` What is sent to the CPE now looks like this: `From: "Maurice Moss" <sip:0991234567@example.com>;user=phone` Now we hit an error like 486 BUSY and the destination has call forwarding active to a mobile phone on another TSP. So we have to send the call out back the IC and numbers need to be translated back to e164. We handle this in a failure route, which in turn could trigger a branch route. So we revert the number back to e164: `$fU = "+41" + $(fU{s.substr,1,0});` Expected outcome: `From: "Maurice Moss" <sip:+41991234567@example.com>;user=phone` Observed outcome: `From: "Maurice Moss" <sip:0991234567+41991234567@example.com>;user=phone` So setting $fU more than once is appending to the user element of the From header URI. This behavior has not been found in any documentation. I have been working around most of the issues by making sure I change $fU (and $tU) at the latest possible time and only once. But in the case described above, I have not been able to come up with a work-around yet. I also can't think of any benefit of the way those PV are handled or any harm that could be done, to handle them differently and make the last 'write' overwrite and previous value, instead of appending. Thank you for looking into this. -Benoît- -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3165 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3165(a)github.com>

3 4

[kamailio/kamailio] Setting OpenSSL TLS1.3 cipher lists (PR #4256)
by Nicolas Chapleau 24 Jun '25

24 Jun '25

#### Pre-Submission Checklist    - [x] Commit message has the format required by CONTRIBUTING guide - [x] Commits are split per component (core, individual modules, libs, utils, ...) - [x] Each component has a single commit (if not, squash them into one commit) - [x] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [ ] Small bug fix (non-breaking change which fixes an issue) - [ ] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [ ] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description  You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/4256 -- Commit Summary -- * Using SSL_CTX_set_ciphersuites for TLS 1.3 and above when setting cipher list * tls: Update TLS1.3 ciphers to use SSL_CTX_ciphhersuites on openSSL lib >= 1.1.1 in set_cipher_list() -- File Changes -- M src/modules/tls/tls_domain.c (26) -- Patch Links -- https://github.com/kamailio/kamailio/pull/4256.patch https://github.com/kamailio/kamailio/pull/4256.diff -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/4256 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/pull/4256(a)github.com>

2 23

[kamailio/kamailio] Crash involving rtpengine (Issue #4179)
by Joe Mordica 24 Jun '25

24 Jun '25

jmordica created an issue (kamailio/kamailio#4179) ### Description Kamailio crash involving rtpengine ### Troubleshooting #### Reproduction  #### Debugging Data  ``` GNU gdb (Debian 13.1-3) 13.1 Copyright (C) 2023 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-linux-gnu". Type "show configuration" for configuration details. For bug reporting instructions, please see: <https://www.gnu.org/software/gdb/bugs/>. Find the GDB manual and other documentation resources online at: <http://www.gnu.org/software/gdb/documentation/>. For help, type "help". Type "apropos word" to search for commands related to "word"... Reading symbols from /usr/sbin/kamailio... Reading symbols from /usr/lib/debug/.build-id/20/dc8be8c0aa02eba62b84db3c283789f068fb79.debug... warning: Can't open file /dev/zero (deleted) during file-backed mapping note processing [New LWP 37] [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Core was generated by `kamailio -DD -E -m 8000 -M 512 -f /etc/kamailio/kamailio.cfg -P /var/run/kamail'. Program terminated with signal SIGABRT, Aborted. #0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at ./nptl/pthread_kill.c:44 44 ./nptl/pthread_kill.c: No such file or directory. (gdb) bt full #0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at ./nptl/pthread_kill.c:44 tid = <optimized out> ret = 0 pd = <optimized out> old_mask = {__val = {0}} ret = <optimized out> #1 0x00007f0a2dd31f1f in __pthread_kill_internal (signo=6, threadid=<optimized out>) at ./nptl/pthread_kill.c:78 No locals. #2 0x00007f0a2dce2fb2 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/raise.c:26 ret = <optimized out> #3 0x00007f0a2dccd472 in __GI_abort () at ./stdlib/abort.c:79 save_stage = 1 act = {__sigaction_handler = {sa_handler = 0x20, sa_sigaction = 0x20}, sa_mask = {__val = {1880844493789993498, 1880844493789993498, 1880844493789993498, 0, 0, 0, 0, 2314885530818453536, 2314885530818453536, 2314885530818453536, 2314885530818453536, 0, 0, 0, 0, 94814674008008}}, sa_flags = 365707264, sa_restorer = 0x563bc3029320 <log_prefix_buf>} #4 0x0000563bc2e27414 in qm_debug_check_frag (qm=qm@entry=0x7f0815cc4000, f=f@entry=0x7f0834533950, file=file@entry=0x7f0a0a93420f "rtpengine: rtpengine_hash.c", line=line@entry=528, eline=eline@entry=546, efile=0x563bc2f6abcc "core/mem/q_malloc.c") at core/mem/q_malloc.c:132 p = <optimized out> __func__ = "qm_debug_check_frag" #5 0x0000563bc2e282b9 in qm_free (qmp=<optimized out>, p=0x7f0834533990, file=0x7f0a0a93420f "rtpengine: rtpengine_hash.c", func=0x7f0a0a935040 <__func__.2> "rtpengine_hash_table_free_entry", line=528, mname=0x7f0a0a92a000 "rtpengine") at core/mem/q_malloc.c:546 qm = <optimized out> f = 0x7f0834533950 size = <optimized out> next = <optimized out> prev = <optimized out> __func__ = "qm_free" #6 0x0000563bc2e2d51f in qm_shm_free (qmp=<optimized out>, p=0x7f0834533990, file=0x7f0a0a93420f "rtpengine: rtpengine_hash.c", func=0x7f0a0a935040 <__func__.2> "rtpengine_hash_table_free_entry", line=528, mname=0x7f0a0a92a000 "rtpengine") at core/mem/q_malloc.c:1532 No locals. #7 0x00007f0a0a922adb in rtpengine_hash_table_free_entry (entry=0x7f08263a3f80) at ./src/modules/rtpengine/rtpengine_hash.c:528 __func__ = "rtpengine_hash_table_free_entry" --Type <RET> for more, q to quit, c to continue without paging--info locals #8 0x00007f0a0a927dd4 in rtpengine_hash_table_lookup (callid=..., viabranch=..., op=op@entry=OP_OFFER) at ./src/modules/rtpengine/rtpengine_hash.c:428 entry = 0x7f08263a3f80 last_entry = 0x7f08174e0450 hash_index = 87 node = <optimized out> __func__ = "rtpengine_hash_table_lookup" #9 0x00007f0a0a90ec2b in select_rtpp_node_old (do_test=1, op=OP_OFFER, viabranch=..., callid=...) at ./src/modules/rtpengine/rtpengine.c:3810 node = 0x0 node = <optimized out> __func__ = "select_rtpp_node_old" __llevel = <optimized out> __kld = <optimized out> __llevel = <optimized out> __kld = <optimized out> #10 select_rtpp_node (callid=..., viabranch=..., queried_nodes_list=0x7f0a0de84430, queried_nodes=queried_nodes@entry=0, op=OP_OFFER, do_test=1) at ./src/modules/rtpengine/rtpengine.c:3864 node = 0x0 __func__ = "select_rtpp_node" #11 0x00007f0a0a91228a in rtpp_function_call (bencbuf=bencbuf@entry=0x7ffeb1d5bea0, msg=msg@entry=0x7f0a0de94350, op=<optimized out>, flags_str=<optimized out>, body_out=body_out@entry=0x7ffeb1d5be80, cl_field=cl_field@entry=0x7ffeb1d5be90) at ./src/modules/rtpengine/rtpengine.c:3178 ng_flags = {via = -1, to = 1, packetize = 0, transport = 256, directional = 0, dict = 0x7f0a0de98b78, flags = 0x7f0a0de98d08, direction = 0x7f0a0de98e68, replace = 0x7f0a0de98ec8, rtcp_mux = 0x7f0a0de98f28, sdes = 0x7f0a0de98f88, t38 = 0x7f0a0de99098, received_from = 0x7f0a0de98e08, codec = 0x7f0a0de990f8, codec_strip = 0x0, codec_offer = 0x0, codec_transcode = 0x0, codec_mask = 0x0, codec_set = 0x0, codec_except = 0x0, codec_accept = 0x0, codec_consume = 0x0, call_id = { s = 0x563bc30e195f <buf+287> "5783b150-6ad4-4e55-9555-decf4048c8fb\r\nCSeq: 23471 INVITE\r\nAllow: OPTIONS, REGISTER, SUBSCRIBE, NOTIFY, PUBLISH, INVITE, ACK, BYE, CANCEL, UPDATE, MESSAGE, INFO, REFER\r\nk: replaces, histinfo\r\nX-UNIQUEI"..., len = 36}, from_tag = { s = 0x563bc30e18fb <buf+187> "47d9d572-1f09-46bf-b966-16988c17cf56\r\nt: <sip:02-5333@10.142.0.56>\r\nm: <sip:vxm@10.52.7.2:5081>\r\ni: 5783b150-6ad4-4e55-9555-decf4048c8fb\r\nCSeq: 23471 INVITE\r\nAllow: OPTIONS, REGISTER, SUBSCRIBE, NOTIF"..., len = 36}, to_tag = {s = 0x0, len = 0}} item = <optimized out> resp = <optimized out> viabranch = {s = 0x7f0a0dd15720 "z9hG4bKPje1c3efee-2490-4035-9e2e-b124ec630b820", len = 46} body = { s = 0x563bc30e1b33 <buf+755> "v=0\r\no=- 1936793669 1936793669 IN IP4 10.52.7.2\r\ns=VXM\r\nc=IN IP4 10.52.7.2\r\nt=0 0\r\nm=audio 18690 RTP/AVP 0 101\r\na=rtpmap:101 telephone-event/8000\r\na=fmtp:101 0-16\r\na=ptime:20\r\na=maxptime:140\r\na=sendre"..., len = 204} --Type <RET> for more, q to quit, c to continue without paging--list error = <optimized out> ret = 1 queried_nodes = 0 cont_type = <optimized out> node = <optimized out> cp = <optimized out> pv_val = {rs = {s = 0x7f083a53d3c0 "p", len = -1025336010}, ri = 47244640256, flags = 1} md5 = "\004\220\361\302;V\000\000\260r\366\302;V", '\000' <repeats 11 times>, "\345\323A\270\253\205\301" branch_buf = "\210\033\016\303;V\000\000\177W\315\302;V\000\000\216\033\016\303;V\000\000\000\345\323A\270\253\205\301\224\033\016\303;V\000\000\000\345\323A\270\253\205\301\220\201\351\r\n\177\000\000\000\345" result = <optimized out> t = <optimized out> branch_idx = <optimized out> __func__ = "rtpp_function_call" select_node = <optimized out> #12 0x00007f0a0a917346 in rtpp_function_call_ok (bencbuf=bencbuf@entry=0x7ffeb1d5bea0, msg=msg@entry=0x7f0a0de94350, op=<optimized out>, flags_str=<optimized out>, body=body@entry=0x7ffeb1d5be80, cl_field=cl_field@entry=0x7ffeb1d5be90) at ./src/modules/rtpengine/rtpengine.c:3371 ret = <optimized out> __func__ = "rtpp_function_call_ok" #13 0x00007f0a0a919708 in rtpengine_offer_answer (msg=0x7f0a0de94350, flags=<optimized out>, op=<optimized out>, more=0) at ./src/modules/rtpengine/rtpengine.c:4495 bencbuf = {pieces = 0x7f0a0de9a270, free_list = 0x0, error = 0} dict = <optimized out> body = {s = 0x7f0a0de94350 "\233@\006", len = 1104405760} newbody = <optimized out> anchor = <optimized out> pv_val = {rs = {s = 0x0, len = 177318755}, ri = 0, flags = 4} cur_body = {s = 0x0, len = 0} cl_field = {s = 0x0, len = 0} cl_repl = {s = 0x0, len = 0} __func__ = "rtpengine_offer_answer" error_free = <optimized out> #14 0x0000563bc2c77195 in sr_kemi_exec_func (ket=ket@entry=0x7f0a0a93d5c8 <sr_kemi_rtpengine_exports+72>, msg=<optimized out>, pno=pno@entry=1, vps=<optimized out>) at core/kemiexec.c:84 ``` #### Log Messages  ``` CRITICAL: {1 23471 INVITE 5783b150-6ad4-4e55-9555-decf4048c8fb} <core> [core/mem/q_malloc.c:148]: qm_debug_check_frag(): BUG: qm: prev. fragm. tail overwritten(c0c00a0d, abcdefed)[0x7f0834533950:0x7f0834533990]! Memory allocator was called from rtpengine: rtpengine_hash.c:528. Fragment marked by rtpengine: ../../core/parser/../ut.h:891. Exec from core/mem/q_malloc.c:546. CRITICAL: {1 23471 INVITE 5783b150-6ad4-4e55-9555-decf4048c8fb} <core> [core/mem/q_malloc.c:156]: qm_debug_check_frag(): BUG: qm: prev. fragm. tail overwritten [0x7f08345335b0:0x7f08345335f0] - fragment marked by core: core/msg_translator.c:2305 ``` #### SIP Traffic  ``` (paste your sip traffic here) ``` ### Possible Solutions  ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.8.5 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, MEM_JOIN_FREE, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_SEND_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 12.2.0 ``` * **Operating System**:  ``` Distributor ID: Debian Description: Debian GNU/Linux 12 (bookworm) Release: 12 Codename: bookworm Linux gke-us-east1-external-sip-4b67daea-x3rj 5.15.0-1020-gke #25-Ubuntu SMP Thu Oct 27 05:38:18 UTC 2022 x86_64 GNU/Linux ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/4179 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/4179(a)github.com>

4 10

[kamailio/kamailio] prefix_route - prefix longer than 12 characters ignored (Issue #4218)
by Barry Flanagan 21 Jun '25

21 Jun '25

flantel created an issue (kamailio/kamailio#4218) ### Description If I add a prefix of greater than 12 characters in to prefix_route it does not return the correct route but instead acts as if no record was found. ### Troubleshooting #### Reproduction Create a prefix_route prefix of more than 12 characters and the route will not be chosen. #### Debugging Data There is none. #### Log Messages prefix_route does not seem to produce DEBUG level messages. ### Additional Information ``` kamailio 5.8.6 (x86_64/linux) ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/4218 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/4218(a)github.com>

3 4

[kamailio/kamailio] topoh: fix bug in hiding record routes in reply messages (PR #4170)
by Farzaneh Soltanzadeh 21 Jun '25

21 Jun '25

#### Pre-Submission Checklist    - [ ] Commit message has the format required by CONTRIBUTING guide - [ ] Commits are split per component (core, individual modules, libs, utils, ...) - [ ] Each component has a single commit (if not, squash them into one commit) - [ ] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [ ] Small bug fix (non-breaking change which fixes an issue) - [ ] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [ ] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description  You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/4170 -- Commit Summary -- * hide all record routes except last one in reply messages -- File Changes -- M src/modules/topoh/th_msg.c (16) -- Patch Links -- https://github.com/kamailio/kamailio/pull/4170.patch https://github.com/kamailio/kamailio/pull/4170.diff -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/4170 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/pull/4170(a)github.com>

3 13

[kamailio/kamailio] ims_diameter_server not freeing shared memory (Issue #4116)
by MGrimby 19 Jun '25

19 Jun '25

### Description I have run in to an issue when sending diameter requests using the ims_diameter_server module. Shared memory keeps increasing and are not being freed until restart of kamailio. This leads to all shared memory is being used and no more are able to be allocated. This only happens when the request is sent synchronously. When sent asynchronously shared memory is being freed as far as I can see. Following functions have been used for sending requests. diameter_request([peer], appid, commandcode, message) diameter_request_async([peer], appid, commandcode, message) ### Troubleshooting Sent a bunch of diameter requests and verified that shared memory for the following functions are not freed. do_receive(600): AAATranslateMessage(500): AAACreateAVP(137): #### Reproduction It's possible to reproduce by sending sync diameter request and verify shared memory. Example of diameter request block ``` route[CHECK_LOCATION] { diameter_request("hss.ims.test.local", "16777217", "306", "[ " + "{ \"avpCode\":260, \"vendorId\":0, \"Flags\":64, \"list\":[ { \"avpCode\":266, \"vendorId\":0, \"Flags\":64, \"int32\":10415 }, { \"avpCode\":258, \"vendorId\":0, \"Flags\":64, \"int32\":16777217 } ] }, " + "{ \"avpCode\":277, \"vendorId\":0, \"Flags\":64, \"int32\":1 }, " + "{ \"avpCode\":283, \"vendorId\":0, \"Flags\":64, \"string\":\"ims.test.local\"}, " + "{ \"avpCode\":706, \"vendorId\":10415, \"Flags\":192, \"int32\":0 }, " + "{ \"avpCode\":700, \"vendorId\":10415, \"Flags\":192, \"list\": [ { \"avpCode\":601, \"vendorId\":10415, \"Flags\":192, \"string\":\"tel:" + $fU + "\" }]}, " + "{ \"avpCode\":707, \"vendorId\":10415, \"Flags\":192, \"int32\":0 }, " + "{ \"avpCode\":703, \"vendorId\":10415, \"Flags\":192, \"int32\":14 } ]"); xlog("L_INFO", "Sent Diameter request"); } ``` Stats cdp:replies_received = 343310 shmem:fragments = 142 shmem:free_size = 1221489992 shmem:max_used_size = 948242168 shmem:real_used_size = 925993656 shmem:total_size = 2147483648 shmem:used_size = 558205656 kamcmd mod.stats cdp shm do_receive(600): 256245808 AAATranslateMessage(500): 64420712 AAACreateAVP(137): 218100320 Total: 538774000 #### Debugging Data  ``` (paste your debugging data here) ``` #### Log Messages  ``` (paste your log messages here) ``` #### SIP Traffic  ``` (paste your sip traffic here) ``` ### Possible Solutions  ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.7.4 (x86_64/linux) dc393e flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, MEM_JOIN_FREE, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: dc393e compiled on 13:56:27 Feb 27 2024 with gcc 8.5.0 ``` * **Operating System**:  ``` Linux bmatkamas1 4.18.0-553.16.1.el8_10.x86_64 #1 SMP Thu Aug 1 04:16:12 EDT 2024 x86_64 x86_64 x86_64 GNU/Linux Red Hat Enterprise Linux release 8.10 (Ootpa) ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/4116 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/4116(a)github.com>

4 6

[kamailio/kamailio] cmake format options and naming styles (Issue #4075)
by Daniel-Constantin Mierla 18 Jun '25

18 Jun '25

Discussion to define cmake format options and coding/naming styles. It is better to define most of them now to have coherency in the future. Started from the discussion on #4066. Comment with what you would like to have, describing when useful why your proposal is a good/better option. -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/4075 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/4075(a)github.com>

5 12

← Newer
1
2
3
4
5
6
7
...
20
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev May 2025