sr-dev August 2022

sr-dev@lists.kamailio.org

16 participants
279 discussions

[kamailio/kamailio] Ability to reload location attributes at runtime (#2299)

by Sergiu Pojoga

### Description Looking for a mechanism to reload Location attributes at runtime. Having both registered and permanent Contacts under AoR, with Attributes from `usrloc` to be used for various routing decisions. This is about attributes of permanent Contacts. Registered ones have `xavp_contact` of `usrloc` to store attributes during registration. **Problem:** Only way to make it work is: 1. adding a permanent Contact using `rpc ul.add` 2. assigning attributes in DB `location_attr` per RUID (can't find an rpc function for attributes) 3. restart Kamailio modparam("usrloc", "db_mode", 1) modparam("usrloc", "db_load", 1) This however is far from ideal, having to restart Kamailio for every change in attributes of a Contact. ### Expected behavior #### Actual observed behavior #### Debugging Data ``` (paste your debugging data here) ``` #### Log Messages  ``` (paste your log messages here) ``` #### SIP Traffic  ``` (paste your sip traffic here) ``` ### Possible Solutions  ### Additional Information * **Kamailio Version** - output of `kamailio -v` version: kamailio 5.3.3 (x86_64/linux) 44ccb9 * **Operating System**:  ``` (paste your output here) ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2299

2 years, 4 months

[kamailio/kamailio] dialog: not able to set the hangup_reason , when we hangup calls using xmlrpc. (#1737)

by Surendra Tiwari

### Description We are using xmlrpc to terminate the calls once customer balance reaches to zero. call got terminated but we will not be able to set the dialog variable related to hangup_reason. There should be a way during dlg.terminate_dlg xmlrpc request that if i mention the some parameter then it should set before sending bye to callee and caller.  ### Troubleshooting #### Reproduction  #### Debugging Data  ``` (paste your debugging data here) ``` #### Log Messages  ``` (paste your log messages here) ``` #### SIP Traffic  ``` (paste your sip traffic here) ``` ### Possible Solutions  ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` root@ip-172-31-4-160:/etc/kamailio# kamailio -version version: kamailio 5.1.4 (x86_64/linux) 6ebfda flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 6ebfda compiled on 11:48:26 Sep 7 2018 with gcc 4.8.4 ``` * **Operating System**:  ``` root@ip-172-31-4-160:/etc/kamailio# lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 14.04.5 LTS Release: 14.04 Codename: trusty root@ip-172-31-4-160:/etc/kamailio# uname -a Linux ip-172-31-4-160 3.13.0-143-generic #192-Ubuntu SMP Tue Feb 27 10:45:36 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1737

2 years, 4 months

[kamailio/kamailio] keep new features in a file in the repository (#668)

by Victor Seva

This will allow us to point https://www.kamailio.org/wiki/features/new-in-devel to the file and "force" developers to update that file with the new features when they are introduced in the repository Remaining developers to upgrade the wiki seems pointless and anyone can create a PR for changes --- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/668

2 years, 4 months

[kamailio/kamailio] kazoo: consuming of events fails if message has no body (#1837)

by mihovilkolaric

### Description Consuming messages without message body fails due to a JSON parsing error: ``` ERROR: kazoo [kz_json.c:287]: kz_json_parse(): Error parsing json: unexpected end of data ERROR: kazoo [kz_json.c:288]: kz_json_parse(): ERROR: kazoo [kz_amqp.c:2960]: kz_amqp_send_worker_event(): error parsing json body ``` This makes it unable to consume messages from RabbitMQ's event exchange plugin ( https://www.rabbitmq.com/event-exchange.html ), as the documentatin states: **"The message body is always blank."** ### Possible Solutions As a possible fix I tried following change in kz_amqp.c: ``` void kz_amqp_send_worker_event(kz_amqp_server_ptr server_ptr, amqp_envelope_t* envelope, kz_amqp_bind_ptr bind) { char buffer[100]; kz_amqp_cmd_ptr cmd = NULL; kz_amqp_consumer_delivery_ptr ptr = NULL; json_obj_ptr json_obj = NULL; json_object* JObj = NULL; str* message_id = NULL; int idx = envelope->channel-1; int worker = 0; int _kz_server_id = server_ptr->id; int msg_size = envelope->message.body.len; //begin of changes int routingkey_size = envelope->routing_key.len; if (msg_size == 0 && routingkey_size > 0 ) { char *routingkey_data = pkg_malloc(routingkey_size + 1); memset(routingkey_data, 0, routingkey_size + 1); memcpy(routingkey_data, (char*)envelope->routing_key.bytes, routingkey_size); LM_DBG("Message size: %d\n", msg_size); LM_DBG("Routing Key: %s\n", routingkey_data); char *pos = strchr(routingkey_data,'.'); while (pos){ *pos = '_'; pos = strchr(pos,'.'); } LM_DBG("New Routing Key: %s\n", routingkey_data); sprintf(buffer, "kazoo:%s", routingkey_data); if(kz_amqp_consumer_fire_event(buffer) != 0) { LM_ERR("kazoo:%s not found", routingkey_data); } pkg_free(routingkey_data); return; } char *json_data = pkg_malloc(msg_size + 1); if(!json_data) { LM_ERR("no more package memory available. needed %d\n", msg_size + 1); return; } char *json_data = pkg_malloc(msg_size + 1); //end of changes if(!json_data) { LM_ERR("no more package memory available. needed %d\n", msg_size + 1); return; } ``` The change is rather simple: If there is no message-body supplied, the event-route _kazoo:<binding_key>_ is called (after replacing any '.' with '_' in the routing_key). -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1837

2 years, 4 months

[kamailio/kamailio] dialog: set $rs when failed TCP send (#2867)

by sergey-safarov

### Description I use TCP transport to relay SIP messages. When Kamailio cannot connect to another server then Kamailio generates response `408 Request Timeout`. inside `event_route[dialog:failed]` route block I check error code `$rs` but this value is `null`. This happens because Kamailio does not able to relay SIP messages and is not able to receive responses. But `tm` module generates a response `408 Request Timeout` and will be fine to init `$rs` pseudo-variable using tm module response. ### Expected behavior `$rs` pseudo-variable contains `tm` module response when kamailio does not receive a response from another server. #### Actual observed behavior `$rs` pseudo-variable contains `null` value when kamailio does not receive a response from another server. To check you can use ``` event_route[dialog:failed] { $var(code_xxx) = $(rs{re.subst,/([0-9])[0-9]{2}/\1xx/}); xlog("L_INFO", "websocket|log|dialog failed $rs; $var(code_xxx)\n"); } ``` And relay SIP message to host that reachable. -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2867

2 years, 4 months

[kamailio/kamailio] Path MTU handling; implicit IPv4 assumption, suggested solution for IPv6 (Issue #3119)

by vanrein

### Description Larger SIP frames get dropped when sent over UDP and IPv6. The sending side has MTU 1500 and the receiving side has MTU 1492. This is an IPv6-only setup, so this is problematic. Also, pulling down the MTU of a general server for a tunneled peer would smear like an oil stain. The suggestion to fallback on TCP feels like a hack. ### Troubleshooting #### Reproduction Send a SIP message to a network interface with a lower MTU than the submitted frame size. #### Debugging Data None, transmission works fine. #### Log Messages None, transmission works fine. #### SIP Traffic Irrelevant. #### Code Investigation I explored the Kamailio source code for MTU handling. https://github.com/kamailio/kamailio/blob/81265e41b52cfda9a284233c93683522a… * This defaults to switching off the Don't Fragment bit on IPv4 frames, to allow them to be broken up downstream. * This should check for an IPv4 socket, because (at least) Linux has a separate symbolic value `IPV6_MTU_DISCOVER` * Note that IPv6 is never broken up by routers; they always return ICMPv6 message Packet Too Big * Note that IPv6 Path MTU discovery by the kernel is automatic only for connected UDP sockets * Since Kamailio uses unconnected UDP sockets, Path MTU issues cause packets to be dropped * Note that such packet drops depend on a somewhat dynamic SIP message size, causing random behaviour * I therefore suggest that Kamailio is lacking in some of its IPv6 logic https://github.com/kamailio/kamailio/blob/81265e41b52cfda9a284233c93683522a… * This enables the reporting of ICMP errors, including Path MTU but also other useful things like Host Not Found * This should check for an IPv4 socket, because (at least) Linux has a separate symbolic value `IPV6_RECVERR` * Note that the same behaviour is available on BSD, so it need not be specific to Linux * Note that handling errors is done with `recvmsg()` with a flag `MSG_ERRQUEUE`, which is not used in Kamailio * Note that the ancillary data from `recvmsg()` holds data to cleverly handle ICMP or ICMPv6 responses * I therefore suggest that Kamailio is lacking a fair chunk of its ICMP and ICMPv6 logic * I expect that this may bring efficiency gains due to faster closing of transactions ### Possible Solutions I have been thinking about ways to lower MTU values only for some peers. 1. Using connected sockets might work, possibly as an alternative when Path MTU problems arise. It might not scale however. 2. Every socket could have an extra sending socket set to a lower MTU. The use of `SO_REUSEADDR` seems to allow for that. 3. Before falling back on an extra socket, the desired MTU could be set. Alternatively, as for IPv6, an MTU of 1280 might be considered in many cases: - *If you can carry 6 out of 8 coffee mugs from the kitchen, you need to walk twice, and 4+4 is easier than 6+2* - Anything over the MTU splits into at least 2 frames - The headers added are 40 bytes IPv6 header and 8 bytes Fragment Extension Header - 2 frames can hold a single frame of 2*1280-40-8 = 2512 bytes - Up to 2512 bytes original MTU, breakup in 1280 byte frames will be fine - 3 frames are going to be useful for larger frames, then a similar style can be used - This might help to decide whether 1280 or a higher MTU is most desirable ### Additional Information ``` Kamailio 5.2.1 from Debian stable ``` * **Operating System**: ``` Linux Debian stable on kernel 4.19.0 ``` (I don't suppose it matters, this code has been around for ages. I used permalinks for stable reference). -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3119 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3119(a)github.com>

2 years, 4 months

[kamailio/kamailio] dispatcher: socket atribute usage for initial OPTIONS (#2853)

by sergey-safarov

### Description I use TCP sockets to relay calls to backend servers. Also, I have enabled `tcp_reuse_port` and enabled `socket` attribute in dispatcher settings. INVITE messages to backend servers are now properly send from port 5060. ### Expected behavior For all messages are used the same TCP socket and same source port for all messages (including OPTIONS). #### Actual observed behavior But initial OPTIONS (before the first call send) uses a random source port. ### Additional Information * **Kamailio Version** - output of `kamailio -v` used current c503d2bd31a580138a67f1d4a265ccde5791d271 with small customization. * **Operating System**: aarch64 ``` [root@sbc-a0 ~]# cat /etc/os-release NAME="CentOS Linux" VERSION="8" ID="centos" ID_LIKE="rhel fedora" VERSION_ID="8" PLATFORM_ID="platform:el8" PRETTY_NAME="CentOS Linux 8" ANSI_COLOR="0;31" CPE_NAME="cpe:/o:centos:centos:8" HOME_URL="https://centos.org/" BUG_REPORT_URL="https://bugs.centos.org/" CENTOS_MANTISBT_PROJECT="CentOS-8" CENTOS_MANTISBT_PROJECT_VERSION="8" ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2853

2 years, 4 months

[kamailio/kamailio] dialog: set context iuid for CANCEL requests (PR #3096)

by descartin

set context iuid for CANCEL requests to let isflagset function return the right value in case a dialog flag was previously set on the call   #### Pre-Submission Checklist    - [ ] Commit message has the format required by CONTRIBUTING guide - [ ] Commits are split per component (core, individual modules, libs, utils, ...) - [ ] Each component has a single commit (if not, squash them into one commit) - [ ] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [x] Small bug fix (non-breaking change which fixes an issue) - [ ] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [x] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description  Using kamailio 5.4 version, we have seen that dlg_isflagset is not detecting a dialog flag set in the request route for the initial INVITE, when a CANCEL request arrives. We have applied this change to set the dialog context unique ide for this request. Since it's done on dlg_onreply, dlg_onroute and dlg_ontimeout functions. This way, dlg_get_by_iuid(&dctx->iuid) in the function ki_dlg_isflagset is not NULL and dialog flags are detected. Is this change correct? Or can it generate any kind of issues? thanks a lot and regards David You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/3096 -- Commit Summary -- * dialog: set context iuid for CANCEL requests to let isflagset function return the right value in case a dialog flag was previously set on the call -- File Changes -- M src/modules/dialog/dlg_handlers.c (3) -- Patch Links -- https://github.com/kamailio/kamailio/pull/3096.patch https://github.com/kamailio/kamailio/pull/3096.diff -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/3096 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/pull/3096(a)github.com>

2 years, 4 months

git:master:c5d48f8e: modules: readme files regenerated - dialog ... [skip ci]

by Kamailio Dev

Module: kamailio Branch: master Commit: c5d48f8ee3884934bd8b910a2dae1888fead3cf1 URL: https://github.com/kamailio/kamailio/commit/c5d48f8ee3884934bd8b910a2dae188… Author: Kamailio Dev <kamailio.dev(a)kamailio.org> Committer: Kamailio Dev <kamailio.dev(a)kamailio.org> Date: 2022-08-26T12:16:27+02:00 modules: readme files regenerated - dialog ... [skip ci] --- Modified: src/modules/dialog/README --- Diff: https://github.com/kamailio/kamailio/commit/c5d48f8ee3884934bd8b910a2dae188… Patch: https://github.com/kamailio/kamailio/commit/c5d48f8ee3884934bd8b910a2dae188…

2 years, 4 months

git:master:353aa1c8: dialog: docs for dlg_ctxiuid_mode params

by Daniel-Constantin Mierla

Module: kamailio Branch: master Commit: 353aa1c821f2889c0a6dbadf9b1b1c1ed039deb6 URL: https://github.com/kamailio/kamailio/commit/353aa1c821f2889c0a6dbadf9b1b1c1… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2022-08-26T12:11:08+02:00 dialog: docs for dlg_ctxiuid_mode params --- Modified: src/modules/dialog/doc/dialog_admin.xml --- Diff: https://github.com/kamailio/kamailio/commit/353aa1c821f2889c0a6dbadf9b1b1c1… Patch: https://github.com/kamailio/kamailio/commit/353aa1c821f2889c0a6dbadf9b1b1c1… --- diff --git a/src/modules/dialog/doc/dialog_admin.xml b/src/modules/dialog/doc/dialog_admin.xml index 00c1d4f9775..162ad965331 100644 --- a/src/modules/dialog/doc/dialog_admin.xml +++ b/src/modules/dialog/doc/dialog_admin.xml @@ -1707,6 +1707,32 @@ modparam("dialog", "bye_early_reason", "Call terminated") </example> </section> + <section id="dialog.p.dlg_ctxiuid_mode"> + <title><varname>dlg_ctxiuid_mode</varname> (int)</title> + <para> + Set dialog context iuid mode, which can specify additional cases + when the internal unique id should be set: + </para> + <itemizedlist> + <listitem><para> + <emphasis>1</emphasis> - set it when processing CANCEL requests. + </para></listitem> + </itemizedlist> + <para> + <emphasis> + Default value is <quote>0</quote>. + </emphasis> + </para> + <example> + <title>Set <varname>dlg_ctxiuid_mode</varname> parameter</title> + <programlisting format="linespecific"> +... +modparam("dialog", "dlg_ctxiuid_mode", 1) +... +</programlisting> + </example> + </section> + </section> <section>

2 years, 4 months

← Newer
1
...
11
12
13
14
15
16
17
...
28
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev August 2022