sr-dev May 2021

sr-dev@lists.kamailio.org

12 participants
288 discussions

[kamailio/kamailio] Close parenthesis on error description (#2589)
by Javier Valencia 20 Jan '25

20 Jan '25

Close parentheses on error description when *Not enough parameters* on *htable_rpc_delete*. You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/2589 -- Commit Summary -- * Close parenthesis on error description -- File Changes -- M src/modules/htable/htable.c (2) -- Patch Links -- https://github.com/kamailio/kamailio/pull/2589.patch https://github.com/kamailio/kamailio/pull/2589.diff -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/2589

3 4

[kamailio/kamailio] Kamailio became unresponsive during runtime (#2380)
by ObakeFilter 27 Jun '24

27 Jun '24

### Description Hi, I ran into an issue where the Kamailio service seemingly froze (didn't crash, but failed to receive and deliver calls) while running, I went through the logs a little bit, and saw the same log pattern (pasted below) recouring every few months or so, on an older installation (5.2.0). Usually, it ended up automatically restarting the service. But not this time, I had to reload it manually to make the service work again. Is this a known issue? How can I make sure that the service will be able to restart the next time it happens? Edward ### Troubleshooting #### Debugging Data  ``` GNU gdb (Ubuntu 7.11.1-0ubuntu1~16.5) 7.11.1 Copyright (C) 2016 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-linux-gnu". Type "show configuration" for configuration details. For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>. Find the GDB manual and other documentation resources online at: <http://www.gnu.org/software/gdb/documentation/>. For help, type "help". Type "apropos word" to search for commands related to "word"... Reading symbols from /usr/local/sbin/kamailio...done. warning: exec file is newer than core file. [New LWP 11413] Core was generated by `kamailio'. Program terminated with signal SIGABRT, Aborted. #0 0x00007f4e4a52e428 in ?? () (gdb) Quit (gdb) bt full #0 0x00007f4e4a52e428 in ?? () No symbol table info available. #1 0x00007f4e4a53002a in ?? () No symbol table info available. #2 0x0000000000000020 in ?? () No symbol table info available. #3 0x0000000000000000 in ?? () No symbol table info available. (gdb) info locals No symbol table info available. (gdb) list 1871 & now if we don't need it */ 1872 #ifdef USE_SLOW_TIMER 1873 + 1 /* slow timer process */ 1874 #endif 1875 #ifdef USE_TCP 1876 +((!tcp_disable)?( 1/* tcp main */ + tcp_listeners ):0) 1877 #endif 1878 #ifdef USE_SCTP 1879 +((!sctp_disable)?sctp_listeners:0) 1880 #endif (gdb) ``` #### Log Messages  ``` Jun 28 16:35:22 kamprodegres kamailio: INFO: <core> [core/sctp_core.c:74]: sctp_core_check_support(): SCTP API not enabled - if you want to use it, load sctp module Jun 28 16:35:22 kamprodegres kamailio: WARNING: <core> [core/socket_info.c:1394]: fix_hostname(): could not rev. resolve 70.36.25.87 Jun 28 16:35:22 kamprodegres kamailio: WARNING: <core> [core/socket_info.c:1394]: fix_hostname(): could not rev. resolve 70.36.25.87 Jun 28 16:35:22 kamprodegres kamailio: INFO: <core> [core/tcp_main.c:5042]: init_tcp(): using epoll_lt as the io watch method (auto detected) Jun 28 16:35:22 kamprodegres kamailio[8489]: INFO: jsonrpcs [jsonrpcs_sock.c:197]: jsonrpc_dgram_mod_init(): the socket /var/run/kamailio/kamailio_rpc.sock already exists, trying to delete it... Jun 28 16:35:22 kamprodegres kamailio[8489]: INFO: rr [../outbound/api.h:52]: ob_load_api(): unable to import bind_ob - maybe module is not loaded Jun 28 16:35:22 kamprodegres kamailio[8489]: INFO: rr [rr_mod.c:177]: mod_init(): outbound module not available Jun 28 16:35:22 kamprodegres kamailio[8489]: INFO: <core> [main.c:2779]: main(): processes (at least): 40 - shm size: 67108864 - pkg size: 8388608 Jun 28 16:35:22 kamprodegres kamailio[8489]: INFO: <core> [core/udp_server.c:154]: probe_max_receive_buffer(): SO_RCVBUF is initially 212992 Jun 28 16:35:22 kamprodegres kamailio[8489]: INFO: <core> [core/udp_server.c:206]: probe_max_receive_buffer(): SO_RCVBUF is finally 425984 Jun 28 16:35:22 kamprodegres kamailio[8489]: INFO: <core> [core/udp_server.c:154]: probe_max_receive_buffer(): SO_RCVBUF is initially 212992 Jun 28 16:35:22 kamprodegres kamailio[8489]: INFO: <core> [core/udp_server.c:206]: probe_max_receive_buffer(): SO_RCVBUF is finally 425984 Jun 28 16:35:22 kamprodegres kamailio[8489]: INFO: <core> [core/udp_server.c:154]: probe_max_receive_buffer(): SO_RCVBUF is initially 212992 Jun 28 16:35:22 kamprodegres kamailio[8489]: INFO: <core> [core/udp_server.c:206]: probe_max_receive_buffer(): SO_RCVBUF is finally 425984 Jun 28 16:35:22 kamprodegres kamailio[8518]: INFO: jsonrpcs [jsonrpcs_sock.c:443]: jsonrpc_dgram_process(): a new child 0/8518 Jun 28 16:35:22 kamprodegres kamailio[8519]: INFO: ctl [io_listener.c:214]: io_listen_loop(): io_listen_loop: using epoll_lt io watch method (config) Jun 29 18:13:37 kamprodegres kamailio[8513]: INFO: {1 581461 CANCEL 402954192_49936786(a)67.231.13.146} tm [t_reply.c:478]: _reply_light(): can't generate 487 reply when a final 404 was sent out Jun 29 18:27:00 kamprodegres kamailio[8508]: INFO: {1 211236 CANCEL 405019408_127896329(a)67.231.13.146} tm [t_reply.c:478]: _reply_light(): can't generate 487 reply when a final 404 was sent out Jun 29 18:51:10 kamprodegres /usr/local/sbin/kamailio[2269]: NOTICE: <core> [main.c:725]: handle_sigs(): Thank you for flying kamailio!!! Jun 29 18:51:10 kamprodegres /usr/local/sbin/kamailio[2326]: INFO: <core> [main.c:847]: sig_usr(): signal 15 received ``` ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.3.2 (x86_64/linux) 7ba545 flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 7ba545 compiled on 16:37:32 Jun 14 2020 with gcc 5.4.0 ``` * **Operating System**:  ``` Ubuntu 16.04 ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2380

3 10

[kamailio/kamailio] cfgt: doesn't support tm_suspend() tm_continue() (#684)
by Victor Seva 23 Jan '24

23 Jan '24

Actual implementation doesn't work with async. Need to investigate how to support it --- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/684

3 8

[kamailio/kamailio] dialog: failover database loading behaviour in shared DB scenario, expiration of dialogs (#2080)
by Henning Westerholt 20 Jan '24

20 Jan '24

The dialog module will expire dialogs that don't actually belong to the particular proxy. Scenario: 2 proxies on 5.2.4 with a loadbalancer in front. Call was routed over proxy1, dialog timeout on proxy2 was shorter (to make it easier to reproduce it). The results: * Dialog synchronized with DMQ: proxy 2 would timeout the dialog * Dialog entry synchronized to proxy2 DB and proxy2 restarted: Proxy2 would timeout the dialog * Dialog entry synchronized to proxy2 DB and proxy2 not restarted: Proxy2 would _not_ timeout the dialog (I’ve tried both db_mode 1 and 2) So the proxy2 would load the dialog into memory and then later expire it. So timeout routes, send_bye on timeout would not work correctly. One idea to solve this would be to check e.g. over the existing socket data if the dialog belongs to this proxy and skip loading it in this case. This could be also made configurable e.g. with a module parameter. Any comments? Better ideas how to solve it? -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2080

5 9

[kamailio/kamailio] core/cfg has memory leak if string value is set (#2094)
by Bastian Triller 17 Jan '24

17 Jan '24

### Description Setting string values via `cfg_rpc` leaves old strings in SHM. #### Reproduction  Set some string value to e.g. `tm.ac_extra_hdrs`: ```shell x=10 while [ $x -gt 0 ] ; do sudo kamctl rpc cfg.sets tm ac_extra_hdrs das$x >/dev/null sleep 0.001 x=$((x - 1)) done ``` #### Debugging Data After running above snippet four times: ``` sudo kamcmd cfg.set_now_int core mem_dump_shm 1 grep "^Oct 4 15:11:4.* qm_status:.*alloc'd" /var/log/syslog | cut -d: -f6- | sort | uniq -c | sort -n | grep core/cfg/cfg 1 alloc'd from core: core/cfg/cfg_struct.c: cfg_shmize(217) 1 alloc'd from core: core/cfg/cfg_struct.c: sr_cfg_init(322) 1 alloc'd from core: core/cfg/cfg_struct.c: sr_cfg_init(334) 1 alloc'd from core: core/cfg/cfg_struct.c: sr_cfg_init(346) 1 alloc'd from core: core/cfg/cfg_struct.c: sr_cfg_init(353) 1 alloc'd from core: core/cfg/cfg_struct.c: sr_cfg_init(360) 2 alloc'd from core: core/cfg/cfg_ctx.c: cfg_register_ctx(47) 3 alloc'd from core: core/cfg/cfg_struct.c: cfg_clone_global(625) 39 alloc'd from core: core/cfg/cfg_ctx.c: cfg_set_now(559) 40 alloc'd from core: core/cfg/cfg_struct.c: cfg_child_cb_new(828) 42 alloc'd from core: core/cfg/cfg_struct.c: cfg_clone_str(130) sudo kamcmd mod.stats core shm|grep \\bcfg_ cfg_clone_global(625): 1392 cfg_set_now(559): 624 cfg_clone_str(130): 384 cfg_shmize(217): 696 cfg_register_ctx(47): 64 cfg_child_cb_new(828): 2560 ``` memory values from cfg_clone_str addresses: ``` grep -B1 'Oct 4 15:11:4.*cfg_clone_str' /var/log/syslog|sed '/address=/!d' | cut -d: -f6- 55. N address=0x7f1310eab7f8 frag=0x7f1310eab7c0 size=40 used=1 56. N address=0x7f1310eab888 frag=0x7f1310eab850 size=24 used=1 62. N address=0x7f1310ec7b10 frag=0x7f1310ec7ad8 size=8 used=1 65. N address=0x7f1310ec7ca0 frag=0x7f1310ec7c68 size=8 used=1 68. N address=0x7f1310ec7e30 frag=0x7f1310ec7df8 size=8 used=1 69. N address=0x7f1310ec7ea0 frag=0x7f1310ec7e68 size=8 used=1 72. N address=0x7f1310ec8030 frag=0x7f1310ec7ff8 size=8 used=1 75. N address=0x7f1310ec81c0 frag=0x7f1310ec8188 size=8 used=1 78. N address=0x7f1310ec8350 frag=0x7f1310ec8318 size=8 used=1 81. N address=0x7f1310ec84e0 frag=0x7f1310ec84a8 size=8 used=1 84. N address=0x7f1310ec8670 frag=0x7f1310ec8638 size=8 used=1 87. N address=0x7f1310ec8800 frag=0x7f1310ec87c8 size=8 used=1 90. N address=0x7f1310ec8990 frag=0x7f1310ec8958 size=8 used=1 93. N address=0x7f1310ec8b20 frag=0x7f1310ec8ae8 size=8 used=1 96. N address=0x7f1310ec8cb0 frag=0x7f1310ec8c78 size=8 used=1 99. N address=0x7f1310ec8e40 frag=0x7f1310ec8e08 size=8 used=1 103. N address=0x7f1310ec92f0 frag=0x7f1310ec92b8 size=8 used=1 106. N address=0x7f1310ec9480 frag=0x7f1310ec9448 size=8 used=1 109. N address=0x7f1310ec9610 frag=0x7f1310ec95d8 size=8 used=1 112. N address=0x7f1310ec97a0 frag=0x7f1310ec9768 size=8 used=1 115. N address=0x7f1310ec9930 frag=0x7f1310ec98f8 size=8 used=1 118. N address=0x7f1310ec9ac0 frag=0x7f1310ec9a88 size=8 used=1 121. N address=0x7f1310ec9c50 frag=0x7f1310ec9c18 size=8 used=1 124. N address=0x7f1310ec9de0 frag=0x7f1310ec9da8 size=8 used=1 127. N address=0x7f1310ec9f70 frag=0x7f1310ec9f38 size=8 used=1 131. N address=0x7f1310eca420 frag=0x7f1310eca3e8 size=8 used=1 134. N address=0x7f1310eca5b0 frag=0x7f1310eca578 size=8 used=1 137. N address=0x7f1310eca740 frag=0x7f1310eca708 size=8 used=1 140. N address=0x7f1310eca8d0 frag=0x7f1310eca898 size=8 used=1 144. N address=0x7f1310ecad80 frag=0x7f1310ecad48 size=8 used=1 147. N address=0x7f1310ecaf10 frag=0x7f1310ecaed8 size=8 used=1 150. N address=0x7f1310ecb0a0 frag=0x7f1310ecb068 size=8 used=1 153. N address=0x7f1310ecb230 frag=0x7f1310ecb1f8 size=8 used=1 156. N address=0x7f1310ecb3c0 frag=0x7f1310ecb388 size=8 used=1 159. N address=0x7f1310ecb550 frag=0x7f1310ecb518 size=8 used=1 162. N address=0x7f1310ecb6e0 frag=0x7f1310ecb6a8 size=8 used=1 165. N address=0x7f1310ecb870 frag=0x7f1310ecb838 size=8 used=1 168. N address=0x7f1310ecba00 frag=0x7f1310ecb9c8 size=8 used=1 172. N address=0x7f1310ecbeb0 frag=0x7f1310ecbe78 size=8 used=1 175. N address=0x7f1310ecc040 frag=0x7f1310ecc008 size=8 used=1 178. N address=0x7f1310ecc1d0 frag=0x7f1310ecc198 size=8 used=1 181. N address=0x7f1310ecc360 frag=0x7f1310ecc328 size=8 used=1 0x7f1310eab7f8: "trying -- your call is important to us" 0x7f1310eab888: "Server Internal Error" 0x7f1310ec7b10: "das10" 0x7f1310ec7ca0: "das9" 0x7f1310ec7e30: "das10" 0x7f1310ec7ea0: "das10" 0x7f1310ec8030: "das9" 0x7f1310ec81c0: "das9" 0x7f1310ec8350: "das8" 0x7f1310ec84e0: "das7" 0x7f1310ec8670: "das6" 0x7f1310ec8800: "das5" 0x7f1310ec8990: "das4" 0x7f1310ec8b20: "das3" 0x7f1310ec8cb0: "das2" 0x7f1310ec8e40: "das1" 0x7f1310ec92f0: "das10" 0x7f1310ec9480: "das9" 0x7f1310ec9610: "das8" 0x7f1310ec97a0: "das7" 0x7f1310ec9930: "das6" 0x7f1310ec9ac0: "das5" 0x7f1310ec9c50: "das4" 0x7f1310ec9de0: "das3" 0x7f1310ec9f70: "das2" 0x7f1310eca420: "das1" 0x7f1310eca5b0: "das8" 0x7f1310eca740: "das7" 0x7f1310eca8d0: "das6" 0x7f1310ecad80: "das5" 0x7f1310ecaf10: "das4" 0x7f1310ecb0a0: "das3" 0x7f1310ecb230: "das2" 0x7f1310ecb3c0: "das1" 0x7f1310ecb550: "das8" 0x7f1310ecb6e0: "das7" 0x7f1310ecb870: "das6" 0x7f1310ecba00: "das5" 0x7f1310ecbeb0: "das4" 0x7f1310ecc040: "das3" 0x7f1310ecc1d0: "das2" 0x7f1310ecc360: "das1" ``` ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` /usr/sbin/kamailio -v version: kamailio 5.2.4 (x86_64/linux) flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 6.3.0 ``` * **Operating System**: ``` Debian 9.11 ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2094

5 13

[kamailio/kamailio] dmq_usrloc not replicating contact attributes (#1968)
by pwakano 16 Jan '24

16 Jan '24

### Description  The dmq_usrloc module is not replicating the extra attributes saved in the xavp for the contact. So remote nodes don't receive these values, being unable to access it properly. It is expected that the attributes are replicated as well. #### Reproduction  Setup two nodes using the dmq_usrloc and usrloc in db_mode=0. When receiving a REGISTER, before saving the contact add some attribute in the xavp_contact. In a subsequent message to this contact (e.g.: INVITE) use a lookup() or registered() and try to access the desired xavp_contact attribute. If the request is received in the local node (which received the original REGISTER), the attribute will be valid, but if the request is received in the remote node, the attribute is empty. #### Log Messages  ``` May 29 16:06:18 kamailio-2 /usr/sbin/kamailio[23230]: DEBUG: registrar [save.c:410]: pack_ci(): generated ruid is: uloc-5cee2114-5abe-2 May 29 16:06:18 kamailio-2 /usr/sbin/kamailio[23230]: DEBUG: usrloc [ucontact.c:73]: ucontact_xavp_store(): trying to clone per contact xavps May 29 16:06:18 kamailio-2 /usr/sbin/kamailio[23230]: DEBUG: <core> [core/xavp.c:697]: xavp_clone_level_nodata(): cloned root xavp [ulattrs] May 29 16:06:18 kamailio-2 /usr/sbin/kamailio[23230]: DEBUG: <core> [core/xavp.c:721]: xavp_clone_level_nodata(): cloned inner xavp [cluster_node] May 29 16:06:18 kamailio-2 /usr/sbin/kamailio[23230]: DEBUG: usrloc [ucontact.c:1701]: update_ucontact(): exists callback for type= UL_CONTACT_UPDATE May 29 16:06:18 kamailio-2 /usr/sbin/kamailio[23230]: DEBUG: usrloc [ul_callback.h:84]: run_ul_callbacks(): contact=0x7f51b624d418, callback type 2/15, id 1 entered May 29 16:06:18 kamailio-2 /usr/sbin/kamailio[23230]: DEBUG: dmq_usrloc [usrloc_sync.c:776]: dmq_ul_cb_contact(): Callback from usrloc with type=2 May 29 16:06:18 kamailio-2 /usr/sbin/kamailio[23230]: DEBUG: dmq_usrloc [usrloc_sync.c:427]: init_usrloc_dmq_recv(): Initializing usrloc_dmq_recv for pid (23230) May 29 16:06:18 kamailio-2 /usr/sbin/kamailio[23230]: DEBUG: dmq_usrloc [usrloc_sync.c:785]: dmq_ul_cb_contact(): Replicating local update to other nodes... May 29 16:06:18 kamailio-2 /usr/sbin/kamailio[23230]: DEBUG: dmq_usrloc [usrloc_sync.c:746]: usrloc_dmq_send_contact(): sending serialized data {"action":1,"aor":"345671002","ruid":"uloc-5cee20df-5953-1","c":"sip:345671002@172.28.128.200:5060;rinstance=38e53fed7e84e081;transport=UDP","received":"","path":"<sip:172.28.128.102:5060;received=sip:172.28.128.200:5060;lr>","callid":"NOeeFh1Bh5JR0eJG8DENkg..","user_agent":"Z 3.15.40006 rv2.8.20","instance":"","expires":1559110577,"cseq":12,"flags":0,"cflags":3072,"q":-1,"last_modified":1559109977,"methods":4294967295,"reg_id":0,"server_id":0} May 29 16:06:18 kamailio-2 /usr/sbin/kamailio[23230]: DEBUG: dmq_usrloc [usrloc_sync.c:315]: usrloc_dmq_send(): sending dmq broadcast... ``` ### Possible Solutions  Only workaround seems to use usrloc with db_mode=3 and then not use the dmq_usrloc, having the usrloc with attributes info shared via the DB.... ### Additional Information Kamailio 5.2.2 installed from the repo. ``` # kamailio -v version: kamailio 5.2.2 (x86_64/linux) 67f967 flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 67f967 compiled on 11:40:41 Mar 11 2019 with gcc 4.8.5 ``` * **Operating System**:  ``` # cat /etc/centos-release CentOS Linux release 7.3.1611 (Core) # uname -a Linux kamailio-2 3.10.0-514.21.2.el7.x86_64 #1 SMP Tue Jun 20 12:24:47 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1968

3 7

[kamailio/kamailio] Using PATH makes nathelper to send the SIP ping to itself (#2011)
by pwakano 13 Jan '24

13 Jan '24

### Description When using the PATH header option to keep track of original Kamailio node that received the REGISTER, if nathelper is also used with SIP ping enabled, the SIP OPTIONS is sent to itself following the PATH header and not sent directly to the destination. The nathelper/user location modules should have a flag similar to the "path_check_local" of the registrar module, which is meant to avoid looping the message to itself in case the next hop pointed by the PATH header is "myself".  ### Troubleshooting #### Reproduction Configure the registrar module to support PATH and before saving the contact info add the PATH header with the local Kamailio information. Also make sure to have the nathelper and usrloc modules configured to send the keepalive SIP OPTIONS to the registered extensions. By the time the SIP OPTIONS is sent, Kamailio sends to itself, then the message has to be loose_route'd to the final destination. This could be avoided by having the nathelper module to identify the next hop is Kamailio itself skipping this destination as a call to "lookup()" does for the registrar module when the flag path_check_local is true.  #### SIP Traffic  172.128.128.10 is the Kamailio IP and 172.128.128.20 is the extension IP ``` 11:51:07.224713 IP (tos 0x60, ttl 64, id 64497, offset 0, flags [none], proto UDP (17), length 518) 172.128.128.10.5060 > 172.128.128.10.5060: SIP, length: 490 OPTIONS sip:345671002@172.128.128.20:5060;rinstance=d1eb3444a5cec5a1;transport=UDP SIP/2.0 Via: SIP/2.0/UDP 172.128.128.10:5060;branch=z9hG4bK2540713 Route: <sip:172.128.128.10:5060;received=sip:172.128.128.20:5060;lr;cluster_node=192.168.156.10:5060> From: sip:sbc@mydomain.com;tag=uloc-5d2e6499-2fb5-1-0-c15309d2 To: sip:345671002@172.128.128.20:5060;rinstance=d1eb3444a5cec5a1;transport=UDP Call-ID: 40ee1573-7506bba3-5e30c05(a)172.128.128.10 CSeq: 1 OPTIONS Content-Length: 0 11:51:07.226132 IP (tos 0x60, ttl 64, id 44359, offset 0, flags [none], proto UDP (17), length 502) 172.128.128.10.5060 > 172.128.128.20.5060: SIP, length: 474 OPTIONS sip:345671002@172.128.128.20:5060;rinstance=d1eb3444a5cec5a1;transport=UDP SIP/2.0 Via: SIP/2.0/UDP 172.128.128.10;branch=z9hG4bKb958.b807e80b742db62504a45220d8f0e974.0 Via: SIP/2.0/UDP 172.128.128.10:5060;branch=z9hG4bK2540713 From: sip:sbc@mydomain.com;tag=uloc-5d2e6499-2fb5-1-0-c15309d2 To: sip:345671002@172.128.128.20:5060;rinstance=d1eb3444a5cec5a1;transport=UDP Call-ID: 40ee1573-7506bba3-5e30c05(a)172.128.128.10 CSeq: 1 OPTIONS Content-Length: 0 11:51:07.303474 IP (tos 0x0, ttl 128, id 10816, offset 0, flags [none], proto UDP (17), length 786) 172.128.128.20.5060 > 172.128.128.10.5060: SIP, length: 758 SIP/2.0 200 OK Via: SIP/2.0/UDP 172.128.128.10;branch=z9hG4bKb958.b807e80b742db62504a45220d8f0e974.0 Via: SIP/2.0/UDP 172.128.128.10:5060;branch=z9hG4bK2540713 Contact: <sip:172.128.128.20:5060> To: <sip:345671002@172.128.128.20:5060;rinstance=d1eb3444a5cec5a1;transport=UDP>;tag=bb0c1f2d From: sip:sbc@mydomain.com;tag=uloc-5d2e6499-2fb5-1-0-c15309d2 Call-ID: 40ee1573-7506bba3-5e30c05(a)172.128.128.10 CSeq: 1 OPTIONS Accept: application/sdp, application/sdp Accept-Language: en Allow: INVITE, ACK, CANCEL, BYE, NOTIFY, REFER, MESSAGE, OPTIONS, INFO, SUBSCRIBE Supported: replaces, norefersub, extended-refer, timer, outbound, path, X-cisco-serviceuri User-Agent: Z 3.15.40006 rv2.8.20 Allow-Events: presence, kpml, talk Content-Length: 0 11:51:07.306821 IP (tos 0x60, ttl 64, id 64570, offset 0, flags [none], proto UDP (17), length 727) 172.128.128.10.5060 > 172.128.128.10.5060: SIP, length: 699 SIP/2.0 200 OK Via: SIP/2.0/UDP 172.128.128.10:5060;branch=z9hG4bK2540713 Contact: <sip:172.128.128.20:5060;alias=172.128.128.20~5060~1> To: <sip:345671002@172.128.128.20:5060;rinstance=d1eb3444a5cec5a1;transport=UDP>;tag=bb0c1f2d From: sip:sbc@mydomain.com;tag=uloc-5d2e6499-2fb5-1-0-c15309d2 Call-ID: 40ee1573-7506bba3-5e30c05(a)172.128.128.10 CSeq: 1 OPTIONS Accept: application/sdp, application/sdp Accept-Language: en Allow: INVITE, ACK, CANCEL, BYE, NOTIFY, REFER, MESSAGE, OPTIONS, INFO, SUBSCRIBE Supported: replaces, norefersub, extended-refer, timer, outbound, path, X-cisco-serviceuri User-Agent: Z 3.15.40006 rv2.8.20 Allow-Events: presence, kpml, talk Content-Length: 0 ``` ### Possible Solutions  Not found. ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` # kamailio -v version: kamailio 5.2.2 (x86_64/linux) 67f967 flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 67f967 compiled on 11:40:41 Mar 11 2019 with gcc 4.8.5 ``` * **Operating System**:  ``` # uname -a Linux kamailio-1 3.10.0-514.21.2.el7.x86_64 #1 SMP Tue Jun 20 12:24:47 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2011

4 7

[kamailio/kamailio] unistr.h: No such file or directory (#2020)
by stefan.wen 12 Jan '24

12 Jan '24

4 4

[kamailio/kamailio] List selectors (#2705)
by sergey-safarov 10 Jan '24

10 Jan '24

#### Pre-Submission Checklist - [x] Commit message has the format required by CONTRIBUTING guide - [x] Commits are split per component (core, individual modules, libs, utils, ...) - [ ] Each component has a single commit (if not, squash them into one commit) - [ ] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [ ] Small bug fix (non-breaking change which fixes an issue) - [x] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [x] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description This is the selectors feature for `lost` module. The module still in development but the core functionality is working. What need to do 1. separate feature into dedicated `.c` file; 2. rebase on current `lost` implementation; 3. add documentation; 4. add a unit test. Would be fine if we can merge this into 5.5. This branch based on e7d68556e3560f488c4f421731f78b3f9abe549e commit You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/2705 -- Commit Summary -- * http_client: http_client_request (api) content-type header support * lost: new features, attributes and a new function to dereference location * lost: bug-fix due to a code formatting error * lost: DOM level count fix * http_client: duplicated code removed * lost: README update * lost: memory leak fix and code refactoring * lost: implemented sectors -- File Changes -- M src/modules/http_client/curl_api.c (1) M src/modules/http_client/curl_api.h (3) M src/modules/http_client/functions.c (30) M src/modules/http_client/functions.h (14) M src/modules/lost/doc/lost.xml (2) M src/modules/lost/doc/lost_admin.xml (172) M src/modules/lost/functions.c (921) M src/modules/lost/functions.h (3) M src/modules/lost/lost.c (754) A src/modules/lost/naptr.c (255) A src/modules/lost/naptr.h (38) M src/modules/lost/pidf.c (5) A src/modules/lost/response.c (991) A src/modules/lost/response.h (131) M src/modules/lost/utilities.c (532) M src/modules/lost/utilities.h (65) -- Patch Links -- https://github.com/kamailio/kamailio/pull/2705.patch https://github.com/kamailio/kamailio/pull/2705.diff -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/2705

5 16

[kamailio/kamailio] lib: big integers should not be treated as negative ones (#2106)
by Ivan Murashko 08 Dec '23

08 Dec '23

0xffffffff00000000ULL mask does not take into consideration signed 32 bit integers and as result 2147483648 will be stored as -2147483648. Another mask should be used to correct the issue: 0xffffffff80000000ULL. It processes correctly the case of integers that are greater than 2147483647. There are several gdb tests below: (gdb) p ((unsigned long long)2147483648 & 0xffffffff80000000ULL) $1= 2147483648 (gdb) p ((unsigned long long)2147483647 & 0xffffffff80000000ULL) $2 = 0 (gdb) p ((unsigned long long)2147483646 & 0xffffffff80000000ULL) $3 = 0 (gdb) p ((unsigned long long)4147483646 & 0xffffffff80000000ULL) $4 = 2147483648   #### Pre-Submission Checklist    - [ ] Commit message has the format required by CONTRIBUTING guide - [ ] Commits are split per component (core, individual modules, libs, utils, ...) - [ ] Each component has a single commit (if not, squash them into one commit) - [ ] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [ ] Small bug fix (non-breaking change which fixes an issue) - [ ] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [ ] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description  You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/2106 -- Commit Summary -- * lib: big integers should not be treated as negative ones -- File Changes -- M src/lib/srdb1/db_ut.c (2) -- Patch Links -- https://github.com/kamailio/kamailio/pull/2106.patch https://github.com/kamailio/kamailio/pull/2106.diff -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/2106

4 6

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev May 2021