sr-dev December 2020

sr-dev@lists.kamailio.org

18 participants
204 discussions

issue using evapi module with evapi_relay

by David Escartin

Dear all we have been testing this module with the following setup kamailio 5.3.2 evapi params modparam("evapi", "workers", 4) modparam("evapi", "netstring_format", 0) modparam("evapi", "bind_addr", "127.0.0.1:8448") modparam("evapi", "max_clients", 32) then in the configuration we do evapi_relay of avp including a json data (which can be quite long), like this {"key" : "aarp2q0tcpqhs0cpucuhukjs2ah2j00q(a)10.18.5.64" , "msg" : {"rg_in":"701","ani_init":{"ani_source":"pai", ....... }}} We have an application listening on the tcp socket and writing those messages to a kafka cluster, and this works ok, and in the previous manual tests we have done no issue was found. But when making some load tests, and passing some live traffic we see some issues seems like some times, when there are messages to be sent to the tcp socket at the same time, they are sent in the same message, when normally each data sent using evapi_relay is sent in 1 message We do sometimes see something like this on the application consuming from the tcp socket 2020-11-25 15:20:01.744 UTC [error] <0.706.0>@evapi_kafka_listener:handle_info:167 body "{\"key\" : \" 6142651aa63616c6c04a783cd(a)72.21.24.130\" , \"msg\" : {\"rg_in\":\"677\",\"ani_init\":{\"ani_source\":\"fro\",.......}}}{\"key\" : \"isbc7caT4001915251VabcGhEfHdNiF0i(a)172.16.120.1\" , \"msg\" : {\"rg_in\":\"22\",\"ani_init\":{\"ani_source\":\"pai\", ....... ,\"translate" not valid json; error = {691,invalid_trailing_data} 2020-11-25 15:20:01.745 UTC [error] <0.706.0>@evapi_kafka_listener:handle_info:167 body "dPartition\":\"-1\",......}}}" not valid json; error = {1,invalid_json} and we do see that the application cannot parse the json message fine, because we have like 2 json objects together ......{\"ani_source\":\"fro\",.......}}}{\"key\" : \"isbc7caT4001915251Vabc............ This happens with 2 different UDP receivers processing messages and calling evapi_relay at the same time. But i don't think this happens all the time. Seems like some issue when several processes try to use evapi workers at the same time. We tried to increase evapi workers and it's the same We also saw another issue I think. Seems when the avp sent to evapi socket is bigger than ~1680 char, the json is also truncated, and also happens when we use the socket in Lo interface which has an MTU of 65535. Could you please take a look to see if there is any problem or limitation, or if we are using something wrong? thanks and best regards david -- [image: Logo] David Escartín Almudévar VoIP/Switch Engineer descartin(a)sonoc.io *SONOC* C/ Josefa Amar y Borbón, 10, 4ª · 50001 Zaragoza, España Tlf: +34 917019888 · www.sonoc.io

3 years, 2 months

[kamailio/kamailio] TLS crashes Kamailio 5.4 branch on Ubuntu 20.04 and Debian Buster (#2560)

by Dylan

3 years, 3 months

[kamailio/kamailio] Kamailio not retrieving custom or default socket when sending timed REGISTER messages (#2262)

by kdanderso

### Description When using Kamailio in a multi-homed configuration to register with another device using the uac module, it does not retrieve the custom or default socket information for timed registration attempts. It does, however, use the custom/default socket data for the initial registration. #### Reproduction The network is configured for two addresses: 10.9.9.121/24 and 10.9.7.121/24. Two floating IP addresses are also assigned (via Pacemaker/Corosync): 10.9.9.120/24 and 10.9.7.120/24. For testing, all addresses can be assigned permanently, so it is not necessary to have Pacemaker/Corosync installed. MySQL database has a user in the uacreg table with the socket column set to udp:10.9.7.120:5060. kamailio.cfg includes the following to enable sending of REGISTER messages: mhomed = 1 listen=udp:10.9.9.120 listen=udp:10.9.7.120 #!define DBURL "mysql://kamailio:kamailiorw@10.9.9.101/kamailio" modparam("rr", "append_fromtag", 1); modparam("uac", "reg_db_url", DBURL); modparam("uac", "reg_contact_addr", "10.9.7.120:5060"); modparam("uac", "reg_keep_callid", 1); modparam("uac", "default_socket", "udp:10.9.7.120:5060"); modparam("uac", "reg_timer_interval", 30); #### Log Messages The initial REGISTER outputs the following log data. The registration completes successfully. Mar 24 19:09:27 kam_test kamailio[8425]: DEBUG: uac [uac.c:407]: child_init(): run initial uac registration routine Mar 24 19:09:27 kam_test kamailio[8425]: DEBUG: uac [uac_reg.c:1172]: uac_reg_update(): using custom socket udp:10.9.7.120:5060 to send request Mar 24 19:09:27 kam_test kamailio[8425]: DEBUG: <core> [core/socket_info.c:628]: grep_sock_info(): checking if host==us: 10==10 && [10.9.7.120] == [10.9.9.120] Mar 24 19:09:27 kam_test kamailio[8425]: DEBUG: <core> [core/socket_info.c:635]: grep_sock_info(): checking if port 5060 (advertise 0) matches port 5060 Mar 24 19:09:27 kam_test kamailio[8425]: DEBUG: <core> [core/socket_info.c:628]: grep_sock_info(): checking if host==us: 10==10 && [10.9.7.120] == [10.9.7.120] Mar 24 19:09:27 kam_test kamailio[8425]: DEBUG: <core> [core/socket_info.c:635]: grep_sock_info(): checking if port 5060 (advertise 0) matches port 5060 Mar 24 19:09:27 kam_test kamailio[8425]: DEBUG: tm [uac.c:435]: t_uac_prepare(): next_hop=<sip:10.9.7.102> Mar 24 19:09:27 kam_test kamailio[8425]: DEBUG: tm [uac.c:158]: dlg2hash(): hashid 3846 Mar 24 19:09:27 kam_test kamailio[8425]: DEBUG: tm [uac.c:244]: t_run_local_req(): executing event_route[tm:local-request] Mar 24 19:09:27 kam_test kamailio[8425]: DEBUG: <core> [core/parser/msg_parser.c:610]: parse_msg(): SIP Request: Mar 24 19:09:27 kam_test kamailio[8425]: DEBUG: <core> [core/parser/msg_parser.c:612]: parse_msg(): method: <REGISTER> Mar 24 19:09:27 kam_test kamailio[8425]: DEBUG: <core> [core/parser/msg_parser.c:614]: parse_msg(): uri: <sip:10.9.7.102> Mar 24 19:09:27 kam_test kamailio[8425]: DEBUG: <core> [core/parser/msg_parser.c:616]: parse_msg(): version: <SIP/2.0> Mar 24 19:09:27 kam_test kamailio[8425]: DEBUG: <core> [core/parser/parse_via.c:1303]: parse_via_param(): Found param type 232, <branch> = <z9hG4bK60f.6fd7c907000000000000000000000000.0>; state=16 Mar 24 19:09:27 kam_test kamailio[8425]: DEBUG: <core> [core/parser/parse_via.c:2639]: parse_via(): end of header reached, state=5 Mar 24 19:09:27 kam_test kamailio[8425]: DEBUG: <core> [core/parser/msg_parser.c:498]: parse_headers(): Via found, flags=2 Mar 24 19:09:27 kam_test kamailio[8425]: DEBUG: <core> [core/parser/msg_parser.c:500]: parse_headers(): this is the first via Mar 24 19:09:27 kam_test kamailio[8425]: exec: *** cfgtrace:local_route=[tm:local-request] c=[/usr/local/etc/kamailio/kamailio.cfg] l=229 a=26 n=xlog Mar 24 19:09:27 kam_test kamailio[8425]: DEBUG: <script>: In event_route(tm:local-request) Mar 24 19:09:27 kam_test kamailio[8425]: DEBUG: tm [uac.c:664]: send_prepared_request_impl(): uac: 0x7268e184 branch: 0 to 10.9.7.102:5060 When the timer expires, the following is logged. Since the socket is not found, the registration fails: Mar 24 19:09:57 kam_test kamailio[8425]: DEBUG: tm [uac.c:435]: t_uac_prepare(): next_hop=<sip:10.9.7.102> Mar 24 19:09:57 kam_test kamailio[8425]: ERROR: <core> [core/forward.c:181]: get_out_socket(): no socket found Mar 24 19:09:57 kam_test kamailio[8425]: ERROR: <core> [core/forward.c:183]: get_out_socket(): no corresponding socket found for(udp:10.9.7.102:5060) Mar 24 19:09:57 kam_test kamailio[8425]: ERROR: tm [ut.h:316]: uri2dst2(): no corresponding socket found for "10.9.7.102" af 2 (udp:10.9.7.102:5060) Mar 24 19:09:57 kam_test kamailio[8425]: ERROR: tm [uac.c:463]: t_uac_prepare(): no socket found Mar 24 19:09:57 kam_test kamailio[8425]: DEBUG: tm [h_table.c:132]: free_cell_helper(): freeing transaction 0x7268de10 from uac.c:604 Mar 24 19:09:57 kam_test kamailio[8425]: ERROR: uac [uac_reg.c:1196]: uac_reg_update(): failed to send request for [kamailioha] ### Additional Information version: kamailio 5.3.2 (arm6/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled on 17:22:05 Mar 18 2020 with gcc 8.3.0 * **Operating System**: Linux kam_test 4.19.75-v7+ #1270 SMP Tue Sep 24 18:45:11 BST 2019 armv7l GNU/Linux -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2262

3 years, 3 months

[kamailio/kamailio] tm: 200 OK not processed correctly by Proxy after final non-2xx (#2590)

by annema-Kontron

#### Pre-Submission Checklist    - [x ] Commit message has the format required by CONTRIBUTING guide - [x ] Commits are split per component (core, individual modules, libs, utils, ...) - [x ] Each component has a single commit (if not, squash them into one commit) - [x ] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [ ] Small bug fix (non-breaking change which fixes an issue) - [ ] New feature (non-breaking change which adds new functionality) - [x ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [x ] Tested changes locally -- tested at 5.1.6 - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description  Problem: Forwarding of 200 OK while sent 488 waits for ACK, destroys the UAS send buffer Scenario: During suspension of 200 OK by ims_qos module function Rx_AAR() at terminating PCSCF, The PCRF sends an AA Answer with result code DIAMETER_TOO_BUSY (3004), which triggers the PCSCF to send a 488 ‘Sorry no QoS available’ to the originating side (ims_dialog module function dlg_terminate()). Afterwards neither the 200 OK nor the ACK(488) is processed correctly by the PCSCF. Solution: The UAS send buffer should not be overwritten during processing of 200 OK, because non-2xx is needed to associate the ACK message in a correct way. 200 OK must be forwarded statelessly. Side-Effect (potentially breaks existing function): Some callbacks cannot be called for the 200 OK, to avoid messing the stored 488. You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/2590 -- Commit Summary -- * tm: 200 OK not processed correctly by Proxy after final non-2xx -- File Changes -- M src/modules/tm/t_reply.c (72) -- Patch Links -- https://github.com/kamailio/kamailio/pull/2590.patch https://github.com/kamailio/kamailio/pull/2590.diff -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/2590

3 years, 3 months

[kamailio/kamailio] topos_redis: record-route not updated in dialog key redis during re-invite (#2554)

by balajeesv

### Description Kamailio not updating record-route value stored in redis (topos module) during re-invite config: modparam("ndb_redis", "server", "name=srv1;addr=localhost;port=6379;db=1") modparam("topos", "storage", "redis") modparam("topos_redis", "serverid", "srv1") modparam("topos", "branch_expire", 300) modparam("topos", "dialog_expire", 10800) modparam("topos", "sanity_checks", 1) modparam("topos", "clean_interval", 20)  ### Troubleshooting #### Reproduction 1. Initial Invite from Kamailio to Server1 (Transaction complete) 2. Server1 is down 3. Re-invite from Kamailio to Server2 4. 200 OK contains record-route of Server2 5. ACK is forwarded to Server1 (record-route stored in dialog Key still has old record-route)  #### Debugging Data b_rr value remains same even after 200 OK for re-invite has a different record-route ``` **redis data after Initial Invite:** 127.0.0.1:6379[1]> hgetall d:z:atpsh-5fb50084-5b44-1 1) "b_rr" 2) "<sip:10.130.74.130;lr;ftag=11368SIPpTag091;did=07f.8fa;nat=yes>" 3) "as_contact" 4) "<sip:atpsh-5fb50084-5b44-1@3.225.0.56>" 5) "s_rr" 6) "<sip:3.225.0.56;lr;ftag=11368SIPpTag091;nat=yes>" 7) "b_tag" 8) "2" 9) "bs_contact" 10) "<sip:btpsh-5fb50084-5b44-1@3.225.0.56>" 11) "rectime" 12) "1605698163" 13) "a_tag" 14) "11368SIPpTag091" 15) "s_cseq" 16) "1" 17) "s_method" 18) "INVITE" 19) "b_contact" 20) "sip:atpsh-5fb3efba-4a95-1@52.55.224.188;alias=10.130.72.128~5060~1" 21) "a_callid" 22) "1-11368(a)10.130.74.171" 23) "a_uuid" 24) "atpsh-5fb50084-5b44-1" 25) "b_uuid" 26) "btpsh-5fb50084-5b44-1" 27) "a_contact" 28) "sip:sipp@10.130.74.171:5060;alias=10.130.74.171~5060~1" 29) "iflags" 30) "2" **redis data after re-Invite:** 127.0.0.1:6379[1]> hgetall d:z:atpsh-5fb50084-5b44-1 1) "b_rr" 2) "<sip:10.130.74.130;lr;ftag=11368SIPpTag091;did=07f.8fa;nat=yes>" 3) "as_contact" 4) "<sip:atpsh-5fb50084-5b44-1@3.225.0.56>" 5) "s_rr" 6) "<sip:3.225.0.56;lr;ftag=11368SIPpTag091;nat=yes>" 7) "b_tag" 8) "2" 9) "bs_contact" 10) "<sip:btpsh-5fb50084-5b44-1@3.225.0.56>" 11) "rectime" 12) "1605698163" 13) "a_tag" 14) "11368SIPpTag091" 15) "s_cseq" 16) "1" 17) "s_method" 18) "INVITE" 19) "b_contact" 20) "sip:atpsh-5fb3efba-4a95-1@52.55.224.188;alias=10.130.72.128~5060~1;alias=10.130.72.145~5060~1" 21) "a_callid" 22) "1-11368(a)10.130.74.171" 23) "a_uuid" 24) "atpsh-5fb50084-5b44-1" 25) "b_uuid" 26) "btpsh-5fb50084-5b44-1" 27) "a_contact" 28) "sip:sipp@10.130.74.171:5060;alias=10.130.74.171~5060~1" 29) "iflags" 30) "2" ``` same issue seen for a_rr value in redis.  #### Log Messages  ``` (paste your log messages here) ``` #### SIP Traffic ``` **Initial Invite Incoming:** INVITE sip:+919535346001@10.130.72.228:5060 SIP/2.0 Via: SIP/2.0/UDP 10.130.74.171:5060;branch=z9hG4bK-11368-1-0 From: sipp <sip:9535346001@10.130.72.228>;tag=11368SIPpTag091 To: sut <sip:9535346001@10.130.72.228> Call-ID: 1-11368(a)10.130.74.171 CSeq: 1 INVITE Contact: sip:sipp@10.130.74.171:5060 Supported: timer, 100rel , replaces Max-Forwards: 70 Subject: Performance Test Content-Type: application/sdp Content-Length: 208 **Initial Invite outgoing:** INVITE sip:919535346001@10.130.74.130:5060 SIP/2.0 Via: SIP/2.0/UDP 3.225.0.56:5060;branch=z9hG4bK7afa.d2d1cbb7e8c7a99adf854ba4d854a467.0 From: sipp <sip:9535346001@10.130.72.228>;tag=11368SIPpTag091 To: sut <sip:9535346001@10.130.72.228> Call-ID: 1-11368(a)10.130.74.171 CSeq: 1 INVITE Supported: timer, 100rel , replaces Max-Forwards: 69 Subject: Performance Test Content-Type: application/sdp Content-Length: 208 Contact: <sip:btpsh-5fb50084-5b44-1@3.225.0.56> **response incoming** SIP/2.0 200 OK From: sipp <sip:+9535346001@10.130.72.228>;tag=11368SIPpTag091 To: sut <sip:9535346001@10.130.72.228>;tag=2 Call-ID: 1-11368(a)10.130.74.171 CSeq: 1 INVITE Content-Type: application/sdp Content-Length: 162 Via: SIP/2.0/UDP 3.225.0.56:5060;rport=5060;received=10.130.72.228;branch=z9hG4bK7afa.d2d1cbb7e8c7a99adf854ba4d854a467.0 Contact: <sip:atpsh-5fb3efba-4a95-1@52.55.224.188;alias=10.130.72.128~5060~1> Record-Route: <sip:10.130.74.130;lr;ftag=11368SIPpTag091;did=07f.8fa;nat=yes> Accept: application/sdp Allow: INVITE,ACK,CANCEL,BYE,UPDATE **response outgoing** SIP/2.0 200 OK From: sipp <sip:+9535346001@10.130.72.228>;tag=11368SIPpTag091 To: sut <sip:9535346001@10.130.72.228>;tag=2 Call-ID: 1-11368(a)10.130.74.171 CSeq: 1 INVITE Content-Type: application/sdp Content-Length: 162 Accept: application/sdp Allow: INVITE,ACK,CANCEL,BYE,UPDATE Via: SIP/2.0/UDP 10.130.74.171:5060;rport=5060;branch=z9hG4bK-11368-1-0 Contact: <sip:atpsh-5fb50084-5b44-1@3.225.0.56> **ACK Incoming** ACK sip:atpsh-5fb50084-5b44-1@3.225.0.56 SIP/2.0 Via: SIP/2.0/UDP 10.130.74.171:5060;branch=z9hG4bK-11368-1-5 From: sipp <sip:sipp@10.130.74.171:5060>;tag=11368SIPpTag091 To: sut <sip:service@10.130.72.228:5060>;tag=2 Call-ID: 1-11368(a)10.130.74.171 CSeq: 1 ACK Contact: sip:sipp@10.130.74.171:5060 Max-Forwards: 70 Subject: Performance Test Content-Length: 0 **ACK outgoing** ACK sip:atpsh-5fb3efba-4a95-1@52.55.224.188;alias=10.130.72.128~5060~1 SIP/2.0 Via: SIP/2.0/UDP 3.225.0.56:5060;branch=z9hG4bK7afa.5b31cae6abf9db84bc4197496dd24951.0 From: sipp <sip:sipp@10.130.74.171:5060>;tag=11368SIPpTag091 To: sut <sip:service@10.130.72.228:5060>;tag=2 Call-ID: 1-11368(a)10.130.74.171 CSeq: 1 ACK Max-Forwards: 69 Subject: Performance Test Content-Length: 0 Route: <sip:10.130.74.130;lr;ftag=11368SIPpTag091;did=07f.8fa;nat=yes> Contact: <sip:btpsh-5fb50084-5b44-1@3.225.0.56> **re-invite incoimg** INVITE sip:atpsh-5fb50084-5b44-1@3.225.0.56 SIP/2.0 Via: SIP/2.0/UDP 10.130.74.171:5060;branch=z9hG4bK-11368-1-7 From: sipp <sip:9535346001@10.130.72.228>;tag=11368SIPpTag091 To: sut <sip:9535346001@10.130.72.228>;tag=2 Call-ID: 1-11368(a)10.130.74.171 CSeq: 2 INVITE Contact: sip:sipp@10.130.74.171:5060 Supported: timer, 100rel , replaces Max-Forwards: 70 Subject: Performance Test Content-Type: application/sdp Content-Length: 208 **re-invite outgoing** INVITE sip:atpsh-5fb3efba-4a95-1@52.55.224.188;alias=10.130.72.128~5060~1 SIP/2.0 Via: SIP/2.0/UDP 3.225.0.56:5060;branch=z9hG4bK4afa.168b5e5898c0e5586bbbe73c71d2f089.1 From: sipp <sip:9535346001@10.130.72.228>;tag=11368SIPpTag091 To: sut <sip:9535346001@10.130.72.228>;tag=2 Call-ID: 1-11368(a)10.130.74.171 CSeq: 2 INVITE Supported: timer, 100rel , replaces Max-Forwards: 69 Subject: Performance Test Content-Type: application/sdp Content-Length: 208 Route: <sip:10.130.72.145;lr;ftag=11368SIPpTag091;did=07f.8fa;nat=yes> Contact: <sip:btpsh-5fb50084-5b44-1@3.225.0.56> **response incoming** SIP/2.0 200 OK From: sipp <sip:+9535346001@10.130.72.228>;tag=11368SIPpTag091 To: sut <sip:9535346001@10.130.72.228>;tag=2 Call-ID: 1-11368(a)10.130.74.171 CSeq: 2 INVITE Content-Type: application/sdp Content-Length: 162 Via: SIP/2.0/UDP 3.225.0.56:5060;rport=5060;received=10.130.72.228;branch=z9hG4bK4afa.168b5e5898c0e5586bbbe73c71d2f089.1 Contact: <sip:atpsh-5fb3efba-4a95-1@52.55.224.188;alias=10.130.72.128~5060~1> Record-Route: <sip:10.130.72.145;lr;ftag=11368SIPpTag091;did=07f.8fa> Accept: application/sdp Allow: INVITE,ACK,CANCEL,BYE,UPDATE **response outgoing** SIP/2.0 200 OK From: sipp <sip:+9535346001@10.130.72.228>;tag=11368SIPpTag091 To: sut <sip:9535346001@10.130.72.228>;tag=2 Call-ID: 1-11368(a)10.130.74.171 CSeq: 2 INVITE Content-Type: application/sdp Content-Length: 162 Accept: application/sdp Allow: INVITE,ACK,CANCEL,BYE,UPDATE Via: SIP/2.0/UDP 10.130.74.171:5060;rport=5060;branch=z9hG4bK-11368-1-7 Contact: <sip:atpsh-5fb50084-5b44-1@3.225.0.56> **ACK Incoming** ACK sip:atpsh-5fb50084-5b44-1@3.225.0.56 SIP/2.0 Via: SIP/2.0/UDP 10.130.74.171:5060;branch=z9hG4bK-11368-1-11 From: sipp <sip:sipp@10.130.74.171:5060>;tag=11368SIPpTag091 To: sut <sip:service@10.130.72.228:5060>;tag=2 Call-ID: 1-11368(a)10.130.74.171 CSeq: 2 ACK Contact: sip:sipp@10.130.74.171:5060 Max-Forwards: 70 Subject: Performance Test Content-Length: 0 **ACK outgoing** ACK sip:atpsh-5fb3efba-4a95-1@52.55.224.188;alias=10.130.72.128~5060~1 SIP/2.0 Via: SIP/2.0/UDP 3.225.0.56:5060;branch=z9hG4bK4afa.773266b9ff87b7e02982aef7cafa13e7.0 From: sipp <sip:sipp@10.130.74.171:5060>;tag=11368SIPpTag091 To: sut <sip:service@10.130.72.228:5060>;tag=2 Call-ID: 1-11368(a)10.130.74.171 CSeq: 2 ACK Max-Forwards: 69 Subject: Performance Test Content-Length: 0 Route: <sip:10.130.74.130;lr;ftag=11368SIPpTag091;did=07f.8fa;nat=yes> Contact: <sip:btpsh-5fb50084-5b44-1@3.225.0.56> ```  ### Possible Solutions I checked code for topos_redis module, looks like only duiring initial transaction b_rr and a_rr values are stored https://github.com/kamailio/kamailio/blob/master/src/modules/topos_redis/to…  ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.2.8 (x86_64/linux) 5a7f5b flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 5a7f5b compiled on 09:15:42 Nov 16 2020 with gcc 7.5.0 ``` * **Operating System**:  ``` (paste your output here) ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2554

3 years, 4 months

[kamailio/kamailio] dialog flag vs dlg_manage() - flag doesn't store uac_replace_* dialog variables (#2593)

by Sergiu Pojoga

3 years, 4 months

[kamailio/kamailio] Close parenthesis on error description (#2589)

by Javier Valencia

Close parentheses on error description when *Not enough parameters* on *htable_rpc_delete*. You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/2589 -- Commit Summary -- * Close parenthesis on error description -- File Changes -- M src/modules/htable/htable.c (2) -- Patch Links -- https://github.com/kamailio/kamailio/pull/2589.patch https://github.com/kamailio/kamailio/pull/2589.diff -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/2589

3 years, 4 months

[kamailio/kamailio] Fix in parsing IPv6 address:port (#2592)

by Dennis

This patch fix wrong parsing the pair of IPv6 addr:port in rtpengine module, when loading node information from database.  #### Pre-Submission Checklist    - [ ] Commit message has the format required by CONTRIBUTING guide - [ ] Commits are split per component (core, individual modules, libs, utils, ...) - [ ] Each component has a single commit (if not, squash them into one commit) - [ ] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [x] Small bug fix (non-breaking change which fixes an issue) - [ ] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [ ] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description  You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/2592 -- Commit Summary -- * Fix in parsing IPv6 address:port -- File Changes -- M src/modules/rtpengine/rtpengine.c (9) -- Patch Links -- https://github.com/kamailio/kamailio/pull/2592.patch https://github.com/kamailio/kamailio/pull/2592.diff -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/2592

3 years, 4 months

git:master:dd717b80: core: new core directive modparamx(mod, param, val)

by Daniel-Constantin Mierla

Module: kamailio Branch: master Commit: dd717b80be6f8e9519aa4b3d627cb88267b81146 URL: https://github.com/kamailio/kamailio/commit/dd717b80be6f8e9519aa4b3d627cb88… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2020-12-28T14:08:16+01:00 core: new core directive modparamx(mod, param, val) - alternative to modparam() where all its parameters are evaluated for config script variables - note that only variables that do not depend on SIP message processing should be used at this stage - example - set a module parameter using the value of an evironment variable: modparamx("dispatcher", "db_url", "$env(DBURL)") --- Modified: src/core/cfg.lex Modified: src/core/cfg.y Modified: src/core/modparam.c Modified: src/core/modparam.h Modified: src/core/sr_module.h --- Diff: https://github.com/kamailio/kamailio/commit/dd717b80be6f8e9519aa4b3d627cb88… Patch: https://github.com/kamailio/kamailio/commit/dd717b80be6f8e9519aa4b3d627cb88…

3 years, 4 months

git:master:1ec0f77f: pv: removed code relocared to core

by Daniel-Constantin Mierla

Module: kamailio Branch: master Commit: 1ec0f77f5350abcaacc5831fb658f02ca4108580 URL: https://github.com/kamailio/kamailio/commit/1ec0f77f5350abcaacc5831fb658f02… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2020-12-27T18:20:59+01:00 pv: removed code relocared to core --- Modified: src/modules/pv/pv.c Modified: src/modules/pv/pv_core.c Modified: src/modules/pv/pv_core.h --- Diff: https://github.com/kamailio/kamailio/commit/1ec0f77f5350abcaacc5831fb658f02… Patch: https://github.com/kamailio/kamailio/commit/1ec0f77f5350abcaacc5831fb658f02… --- diff --git a/src/modules/pv/pv.c b/src/modules/pv/pv.c index c21298d752..20f0979d86 100644 --- a/src/modules/pv/pv.c +++ b/src/modules/pv/pv.c @@ -196,10 +196,6 @@ static pv_export_t mod_pvs[] = { {{"dd", (sizeof("dd")-1)}, /* */ PVT_OTHER, pv_get_dsturi_attr, 0, 0, 0, pv_init_iname, 1}, - {{"def", (sizeof("def")-1)}, PVT_OTHER, pv_get_def, 0, - pv_parse_def_name, 0, 0, 0}, - {{"defn", (sizeof("defn")-1)}, PVT_OTHER, pv_get_defn, 0, - pv_parse_defn_name, 0, 0, 0}, {{"di", (sizeof("di")-1)}, /* */ PVT_OTHER, pv_get_diversion, 0, 0, 0, pv_init_iname, 1}, diff --git a/src/modules/pv/pv_core.c b/src/modules/pv/pv_core.c index ed9abe7cce..746e12e3ed 100644 --- a/src/modules/pv/pv_core.c +++ b/src/modules/pv/pv_core.c @@ -3736,53 +3736,3 @@ int pv_get_ksr_attrs(sip_msg_t *msg, pv_param_t *param, pv_value_t *res) return pv_get_null(msg, param, res); } } - -int pv_parse_def_name(pv_spec_p sp, str *in) -{ - if (in == NULL || in->s == NULL || sp == NULL) { - LM_ERR("INVALID DEF NAME\n"); - return -1; - } - sp->pvp.pvn.type = PV_NAME_INTSTR; - sp->pvp.pvn.u.isname.type = AVP_NAME_STR; - sp->pvp.pvn.u.isname.name.s = *in; - return 0; - -} - -int pv_get_def(sip_msg_t *msg, pv_param_t *param, pv_value_t *res) -{ - str *val = pp_define_get(param->pvn.u.isname.name.s.len, param->pvn.u.isname.name.s.s); - - if (val) { - return pv_get_strval(msg, param, res, val); - } - return pv_get_null(msg, param, res); -} - -int pv_parse_defn_name(pv_spec_p sp, str *in) -{ - if (in == NULL || in->s == NULL || sp == NULL) { - LM_ERR("INVALID DEF NAME\n"); - return -1; - } - sp->pvp.pvn.type = PV_NAME_INTSTR; - sp->pvp.pvn.u.isname.type = AVP_NAME_STR; - sp->pvp.pvn.u.isname.name.s = *in; - return 0; - -} - -int pv_get_defn(sip_msg_t *msg, pv_param_t *param, pv_value_t *res) -{ - int n = 0; - str *val = pp_define_get(param->pvn.u.isname.name.s.len, - param->pvn.u.isname.name.s.s); - - if (val) { - str2sint(val, &n); - return pv_get_intstrval(msg, param, res, n, val); - } else { - return pv_get_sintval(msg, param, res, n); - } -} diff --git a/src/modules/pv/pv_core.h b/src/modules/pv/pv_core.h index 02f1141fdf..865a48a2c0 100644 --- a/src/modules/pv/pv_core.h +++ b/src/modules/pv/pv_core.h @@ -390,11 +390,5 @@ int pv_parse_ksr_attrs_name(pv_spec_p sp, str *in); int pv_get_ksr_attrs(sip_msg_t *msg, pv_param_t *param, pv_value_t *res); -int pv_parse_def_name(pv_spec_p sp, str *in); -int pv_get_def(sip_msg_t *msg, pv_param_t *param, pv_value_t *res); - -int pv_parse_defn_name(pv_spec_p sp, str *in); -int pv_get_defn(sip_msg_t *msg, pv_param_t *param, pv_value_t *res); - #endif

3 years, 4 months

← Newer
1
...
6
7
8
9
10
11
12
...
21
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev December 2020