sr-dev December 2020

sr-dev@lists.kamailio.org

18 participants
205 discussions

[kamailio/kamailio] db_redis: add support for native redis cluster (#1997)

by George Diamantopoulos

The db_redis module seems to only support connecting with a single redis instance. It is not evident from the documentation if it implements support for native redis cluster by honouring 'MOVED' replies. ndb_redis seems to have support for native redis clusters, and supports both automatic (see allow_dynamic_nodes parameter of ndb_redis) and manual configuration of redis nodes. Since both modules are based on the hiredis library, is it safe to assume this support could be easily implemented, with some code sharing between the two modules perhaps? If db_redis supports clusters with automatic configuration only (by processing MOVED replies), perhaps the module's documentation should be updated to reflect that. -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1997

3 years, 3 months

[kamailio/kamailio] tm - remove not used route_mode var (#2406)

by Luis Martin Gil

#### Pre-Submission Checklist    - [x] Commit message has the format required by CONTRIBUTING guide - [x] Commits are split per component (core, individual modules, libs, utils, ...) - [x] Each component has a single commit (if not, squash them into one commit) - [ ] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [x] Small bug fix (non-breaking change which fixes an issue) - [ ] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [ ] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description  Removed not used variable "route_mode" in the tm module. This was discovered by @IvanRibakov when using a g++ compiler, which added more strict flags (Ivan's Github is [here](https://github.com/IvanRibakov)) You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/2406 -- Commit Summary -- * tm - remove not used route_mode var -- File Changes -- M src/modules/tm/tm_load.h (1) -- Patch Links -- https://github.com/kamailio/kamailio/pull/2406.patch https://github.com/kamailio/kamailio/pull/2406.diff -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/2406

3 years, 4 months

[kamailio/kamailio] Error loading globalblacklist on startup Kamailio 5.4.1 (#2480)

by Earn330

### Description  ### Troubleshooting #### Reproduction  #### Debugging Data #### Log Messages ``` Sep 17 07:56:36 voip-lab-proxy03 /usr/sbin/kamailio[553]: DEBUG: <core> [core/route.c:885]: fix_actions(): fixing check_blacklist() Sep 17 07:56:36 voip-lab-proxy03 /usr/sbin/kamailio[553]: DEBUG: userblacklist [userblacklist.c:472]: add_source(): add table globalblacklist Sep 17 07:56:36 voip-lab-proxy03 /usr/sbin/kamailio[553]: DEBUG: <core> [dtrie.c:57]: dtrie_init(): allocate 16 bytes for root at 0x7fc29efa4ab0 Sep 17 07:56:36 voip-lab-proxy03 /usr/sbin/kamailio[553]: DEBUG: <core> [dtrie.c:67]: dtrie_init(): allocate 80 bytes for 10 root children pointer at 0x7fc29efa4b28 Sep 17 07:56:36 voip-lab-proxy03 /usr/sbin/kamailio[553]: ERROR: <core> [db.c:481]: db_use_table(): invalid parameter value Sep 17 07:56:36 voip-lab-proxy03 /usr/sbin/kamailio[553]: ERROR: userblacklist [db.c:123]: db_reload_source(): cannot use db table 'globalblacklist' Sep 17 07:56:36 voip-lab-proxy03 /usr/sbin/kamailio[553]: ERROR: userblacklist [userblacklist.c:425]: load_source(): cannot load source from 'globalblacklist' ``` ### Additional Information ``` Kamailio 5.4.1 ``` * **Operating System**: ``` PRETTY_NAME="Debian GNU/Linux 10 (buster)" NAME="Debian GNU/Linux" VERSION_ID="10" VERSION="10 (buster)" VERSION_CODENAME=buster ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Linux voip-lab-proxy03 4.19.0-10-amd64 #1 SMP Debian 4.19.132-1 (2020-07-24) x86_64 GNU/Linux ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2480

3 years, 6 months

[kamailio/kamailio] lost: dynamic HELD url resolving (#2574)

by sergey-safarov

### Description According to design logic HELD request need to send a carrier LIS server. Now lost module sends this request to the preconfigured server via `http_client/httpcon` param. I prefer to use dynamic LIS server discovery according to [rfc7216#section-4](https://tools.ietf.org/html/rfc7216#section-4) and [rfc5986#section-4](https://tools.ietf.org/html/rfc5986#section-4). So dynamic LIS discovery works as: 1. Kamailio send reverse `.in-addr.arpa.` or `.ip6.arpa.` DNS request and caller host DNS name; 2. Kamailio send `LIS:HELD` NAPTR request for a resolved caller hostname and LIS server. 3. Kamailio send HELD request for resolved LIS address. So do get working dynamic LIS discovery required to implement two DNS requests. If any DNS request will fail, then `lost_held_query` function returns an error code. To define required dynamic LIS discovery I suggest use an empty string ("") or NULL value ($null) as the first ("con") function param. This feature request for discussion with lost module author (Wolfgang Kampichler @wkampich) and other interest devs. The ticket may be closed at any time. -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2574

3 years, 7 months

[kamailio/kamailio] Wrong Record-Route and Via header fields when TCP is used (#2033)

by leonid-xorcom

### Description Kamailio server has two legs that are connected to different networks. I'm using Kamailio v.5.2.3 and the "enable_double_rr" is implicitly set to "1". The leg "A" IP address is 10.28.80.1 The leg "B" IP address is 192.168.9.103 The call is initiated from 10.28.80.47 According to the "rr" module documentation, function record_route() should insert two "Record_Route" header fields when a request is accepted on one leg is should go out via the second leg. This works as expected in case of UDP protocol: INVITE sip:2601@192.168.0.178:49162;transport=udp SIP/2.0 Record-Route: <sip:192.168.9.103;r2=on;lr;did=e2c.a191> Record-Route: <sip:10.28.80.1;r2=on;lr;did=e2c.a191> Via: SIP/2.0/UDP 192.168.9.103;branch=z9hG4bKcfa5.d64ecbd87d5315b5993c4ccf16f86537.0 Via: SIP/2.0/UDP 10.28.80.47:5060;rport=5060;branch=z9hG4bK3a9e9a4d But when the TCP protocol is used AND "listen" parameters are defined: listen=udp:10.28.80.1:5060 listen=tcp:10.28.80.1:5060 listen=udp:192.168.9.103:5060 listen=tcp:192.168.9.103:5060 then the outbound message looks like this: INVITE sip:2601@192.168.0.178:48758;transport=tcp SIP/2.0 Record-Route: <sip:10.28.80.1;transport=tcp;lr;did=bcd.72f> Via: SIP/2.0/TCP 10.28.80.1;branch=z9hG4bKb9ca.26ea08654c9dbc32bb0dc6e3b6f92d45.0;i=3 Via: SIP/2.0/TCP 10.28.80.47:5060;rport=33976;branch=z9hG4bK5291fab1 There are two problems there: a) only one Record-Route with leg "A" is inserted b) the added "Via" header field contains the leg "A" IP address instead of expected leg "B" IP address (192.168.9.103). In the LAN trace, I see that in reality the message was sent from leg "B". IMPORTANT: The problem occurs only when the "listen" parameters are defined in the Kamailio configuration. When the "listens" are not configured then everything works correctly. ### Troubleshooting #### Reproduction #### Debugging Data #### Log Messages http://updates.xorcom.com/~xorcom/kam-tcp-problem.tar.gz The archive contains the following files: * syslog-bad.log and bad.cap - Kamailio log and tcpdump trace of a call when the problem occurs * syslog-good.log and good.cap - Kamailio log and tcpdump trace of a call when the problem doesn't occur #### SIP Traffic ### Possible Solutions ### Additional Information kamailio -v version: kamailio 5.2.3 (x86_64/linux) flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 7.3.0 ***Operating System**: Ubuntu 18.0.4 -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2033

3 years, 7 months

[kamailio/kamailio] import_file - wildcard support (#2125)

by sergey-safarov

### Description Could you extend `import_file` directive to support wildcards like ``` import_file "/run/kamailio/cfg/*" ``` This will allow place runtime config files with public IP of VM. Useful for cloud installation. ``` listen=udp:eth0 advertise 52.24.72.57:5060 listen=tcp:eth0 advertise 52.24.72.57:5060 ``` ### Expected behavior All files matched to wildcard included into config #### Actual observed behavior wildcard ignored -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2125

3 years, 8 months

[kamailio/kamailio] $(hdr(foo)[idx]) is 0-based, textopsx.remove_hf_value("foo[idx]") is 1-based, they should be the same (#2387)

by Sebastian Damm

### Description We have some JS code looping over all P-Asserted-Identity headers removing some of the entries: ``` let headerIndex = 0; const telUriMatcher = new RegExp("tel:"); let paiValue = ksr.pv .gete("$(hdr(P-Asserted-Identity)[" + headerIndex + "])") .toString(); while (paiValue.length > 0) { ksr.info( `${ksr.pv.getw("$ci")}: Found P-A-I header with content <${ksr.pv.getw( "$(hdr(P-Asserted-Identity)[" + headerIndex + "])" )}> at index ${headerIndex}\n` ); if (telUriMatcher.test(paiValue)) { ksr.info( `${ksr.pv.getw("$ci")}: Removed P-A-I header ${ksr.pv.getw( "$(hdr(P-Asserted-Identity)[" + headerIndex + "])" )}\n` ); ksr.textopsx.remove_hf_value( "P-Asserted-Identity[" + headerIndex + "]" ); } headerIndex++; paiValue = ksr.pv .gete("$(hdr(P-Asserted-Identity)[" + headerIndex + "])") .toString(); } ``` In our tests, we wanted to remove the second header, but the first one got removed instead. The pseudovars docs say, the index of a header is 0-based. In textopsx docs it doesn't explicitly say, it's 1-based, but the first example shows it actually is. ### Possible Solutions Right now, we replaced the line ``` ksr.textopsx.remove_hf_value("P-Asserted-Identity[" + headerIndex + "]"); ``` with this one: ``` ksr.textopsx.remove_hf_value("P-Asserted-Identity[" + (headerIndex + 1) + "]"); ``` This solves the problem, but it is not what we would expect. Both header access methods should use the same index base. ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.3.5 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 8.3.0 ``` * **Operating System**:  ``` Linux hostname 4.19.0-9-amd64 #1 SMP Debian 4.19.118-2+deb10u1 (2020-06-07) x86_64 GNU/Linux ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2387

3 years, 8 months

[kamailio/kamailio] Dispatcher SNI support (#2591)

by Tim Chubb

Is it possible to specify a specific server name/server id for dispatcher to use to send pings with (and in outgoing requests) It seems I can't (or haven't noticed in the docs) an event route I could use to set the xavp, as tm:local-request happens to late to use there. As an aside why isn't there a "last chance before send" event route? This is probably a feature request more than a bug, as the ideal solution from my point of view would be an additional dispatcher attrs value to be able to set it per destination in the underlying dispatcher data Judging by the output from tls module dbg the tls xavps are checked, before the ping is sent.. I've had a cursery glance at dispatch.c and it seems easy enough to add an extra attr parameter but I'm ata loss as to how I would preset the server name/id xavp... (I'm no c dev, but can Google quick enough to follow along mostly, and happy to fiddle away if anyone can be kind enough to give me some pointers in the right direction) -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2591

3 years, 8 months

[kamailio/kamailio] xavp set in event_route[tm:local-request] are not used in SIP transaction (#2413)

by arkadiam

### Description I'm using dispatcher module like: ``` loadmodule "dispatcher.so" modparam("dispatcher", "list_file", "/etc/kamailio/dispatcher.list") modparam("dispatcher", "ds_probing_mode", 1) modparam("dispatcher", "ds_ping_interval", 60) ``` With records like: ``` 1 sip:sip.host.com;transport=tls 0 1 socket=tls:111.222.233.10:5061;ping_from=sip:my-domain-01.com 2 sip:sip.host.com;transport=tls 0 1 socket=tls:111.222.233.20:5061;ping_from=sip:my-domain-02.com ``` In event_route[tm:local-request] I'm modifying 'Contact' and would like to specify what client TLS profile to use via server name or server id. ``` event_route[tm:local-request] { if(is_method("OPTIONS")) { append_hf("Contact: <sip:some-host.com;transport=tls>\r\n"); $xavp(tls=>server_name)=$fd; $xavp(tls[0]=>server_id)=$fd; } } ``` Setting 'tls' xavp doesn't make any difference and default client TLS profile is being used. It happens because in src/modules/tm/uac.c there is a code: ``` t_run_local_req() ... tm_xdata_swap(new_cell, &backup_xd, 0); ... /* restore original environment */ tm_xdata_swap(new_cell, &backup_xd, 1); ``` which resets any xavp changes done in event_route[tm:local-request]. Expected behaviour: ability to use xavp in tm:local-request route. That would allow to choose TLS client profile for dispatcher initiated requests. ### Possible Solutions As a hack, in tm_xdata_swap() for mode=1, don't restore xavp list if it was NULL. ``` if (x->xavps_list != NULL && *x->xavps_list==NULL) { // .... don't restore empty list... } else { xavp_set_list(x->xavps_list); } ``` This change allows to select required TLS profile for dispatcher requests. ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.3.5 (x86_64/linux) ff2f8c-dirty flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: ff2f8c -dirty compiled on 10:19:05 Jul 28 2020 with gcc 7.5.0 ``` * **Operating System**: ``` Linux xx 4.15.0-111-generic #112-Ubuntu SMP Thu Jul 9 20:32:34 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2413

3 years, 8 months

[kamailio/kamailio] lreproxy module (#2208)

by mojtabaesfandiari

lreproxy: add new lreproxy module   #### Pre-Submission Checklist    - [ ] Commit message has the format required by CONTRIBUTING guide - [ ] Commits are split per component (core, individual modules, libs, utils, ...) - [ ] Each component has a single commit (if not, squash them into one commit) - [ ] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [ ] Small bug fix (non-breaking change which fixes an issue) - [ ] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [ ] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description  You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/2208 -- Commit Summary -- * lreproxy module -- File Changes -- A src/modules/lreproxy/README.md (1) A src/modules/lreproxy/lreproxy.c (1976) A src/modules/lreproxy/lreproxy.h (120) A src/modules/lreproxy/lreproxy_funcs.c (460) A src/modules/lreproxy/lreproxy_funcs.h (41) A src/modules/lreproxy/lreproxy_hash.c (521) A src/modules/lreproxy/lreproxy_hash.h (70) -- Patch Links -- https://github.com/kamailio/kamailio/pull/2208.patch https://github.com/kamailio/kamailio/pull/2208.diff -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/2208

3 years, 9 months

← Newer
1
...
5
6
7
8
9
10
11
...
21
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev December 2020