Module: sip-router Branch: hpw/branch_failure_route Commit: 4e0cf550f75835b3f97bda9bb7934389a54b1f18 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=4e0cf55… Author: Hugh Waite <hugh.waite(a)crocodile-rcs.com> Committer: Hugh Waite <hugh.waite(a)crocodile-rcs.com> Date: Tue Mar 19 15:41:55 2013 +0000 modules/tm: Initial revision of branch_failure_route - New branch_failure_route defined - cfg route is called but xlog() causes segfault --- modules/tm/h_table.h | 4 ++ modules/tm/t_fwd.c | 1 + modules/tm/t_hooks.h | 6 +++- modules/tm/t_lookup.c | 1 + modules/tm/t_reply.c | 97 +++++++++++++++++++++++++++++++++++++++++++++++++ modules/tm/t_reply.h | 7 ++++ modules/tm/tm.c | 27 ++++++++++++++ modules/tm/tm_load.c | 1 + modules/tm/tm_load.h | 2 + 9 files changed, 145 insertions(+), 1 deletions(-) Diff: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commitdiff;h=4e0… _______________________________________________ sr-dev mailing list sr-dev(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev

Hi, To run in an event_route, functions need to have the EVENT_ROUTE/REQUEST_ROUTE flag set. So far the ones I want to use already have that, and I can always add that flag if required. I know functions can check the route type with 'get_route_type()', but for an event_route this is the same as REQUEST_ROUTE. For example, I will want to run something like: branch_failure_route[OUTBOUND_FAIL] { if (t_check_status("430") { disable_contact(); t_next_contact_flow(); t_relay(); } } I think t_check_status() will return the wrong thing here because of the route type. Can I work round that in an event_route and are there any similar implications?