26 Jul
2010
26 Jul
'10
9:11 p.m.
Hello,
I have the following transformation on the SDP Body:
$(rb{re.subst,/^(.*)m=audio ([0-9]+) RTP\/AVP ([0-9 ]+)\015\012(.*)$/\3/s})
However when I assign this to an AVP, i.e.
$avp(s:sdp-payloads) = $(rb{re.subst,/^(.*)m=audio ([0-9]+) RTP\/AVP ([0-9
]+)\015\012(.*)$/\3/s});
I receive back a NULL result / transformation "regex does not match" is what
I receive with high verbose syslog on kamailio.
HOWEVER.
When I do something like this:
xlog("L_INFO", "Payloads Available: $(rb{re.subst,/^(.*)m=audio ([0-9]+)
RTP\/AVP ([0-9 ]+)\015\012(.*)$/\3/s})");
It executes properly -- transformation regex matches and the payloads are
displayed as expected.
If anyone can provide any insight as to what I may be doing wrong it would
be greatly appreciated.
P.S. Kamailio SVN Revision # 2:5906M (1.5.2-notls).
Also I CC'ed devel list (as I do believe this may be a bug).
Thanks!
Sincerely,
Brandon Armstead
27 Jul
27 Jul
11:50 a.m.
New subject: [SR-Users] Kamailio Transformation Assignment to an AVP
Hello,
interesting, when I troubleshooted before your previous report, I used
this piece of cfg:
xlog("==================================\n");
$var(b) =
"v=0\r\n"
"o=- 5 2 IN IP4 192.168.3.100\r\n"
"s=CounterPath Bria\r\n"
"c=IN IP4 174.37.XX.XXX\r\n"
"t=0 0\r\n"
"m=audio 64192 RTP/AVP 107 0 8 18 101\r\n"
"a=sendrecv\r\n"
"a=rtpmap:107 BV32/16000\r\n"
"a=rtpmap:18 G729/8000\r\n"
"a=fmtp:18 annexb=yes\r\n"
"a=rtpmap:101 telephone-event/8000\r\n"
"a=fmtp:101 0-15\r\n"
"a=nortpproxy:yes\r\n";
$var(c) = $(var(b){re.subst,|.*m=audio [0-9]+ RTP/AVP ([0-9 ]+).+|\1|s});
xlog("==================================: [$var(c)]\n");
And the xlog printed properly the value of $var(c) - meaning that it was
assigned the right value. I will test with avps next time I have a chance.
Cheers,
Daniel
On 7/26/10 9:11 PM, Brandon Armstead wrote:
Hello,
I have the following transformation on the SDP Body:
$(rb{re.subst,/^(.*)m=audio ([0-9]+) RTP\/AVP ([0-9
]+)\015\012(.*)$/\3/s})
However when I assign this to an AVP, i.e.
$avp(s:sdp-payloads) = $(rb{re.subst,/^(.*)m=audio ([0-9]+) RTP\/AVP
([0-9 ]+)\015\012(.*)$/\3/s});
I receive back a NULL result / transformation "regex does not match"
is what I receive with high verbose syslog on kamailio.
HOWEVER.
When I do something like this:
xlog("L_INFO", "Payloads Available: $(rb{re.subst,/^(.*)m=audio
([0-9]+) RTP\/AVP ([0-9 ]+)\015\012(.*)$/\3/s})");
It executes properly -- transformation regex matches and the payloads
are displayed as expected.
If anyone can provide any insight as to what I may be doing wrong it
would be greatly appreciated.
P.S. Kamailio SVN Revision # 2:5906M (1.5.2-notls).
Also I CC'ed devel list (as I do believe this may be a bug).
Thanks!
Sincerely,
Brandon Armstead
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
http://www.asipto.com/
9:44 p.m.
New subject: [SR-Users] Kamailio Transformation Assignment to an AVP
Daniel,
I've also tried with script vars. I think it has something to do with the actual
dynamic psuedo variable $rb. Var assignment and mangling does not work for me either.
I.e. Keep everything the same except $var(test) = $rb and so on. Let me know if this
makes sense.
Sincerely,
Brandon Armstead
*Forgot to reply to ALL (resending)
Sent from my Verizon Wireless BlackBerry
-----Original Message-----
From: Daniel-Constantin Mierla <miconda(a)gmail.com>
Date: Tue, 27 Jul 2010 11:50:36
To: Brandon Armstead<brandon(a)cryy.com>
Cc: <users(a)lists.kamailio.org>rg>; <devel(a)lists.kamailio.org>
Subject: Re: [SR-Users] Kamailio Transformation Assignment to an AVP
Hello,
interesting, when I troubleshooted before your previous report, I used
this piece of cfg:
xlog("==================================\n");
$var(b) =
"v=0\r\n"
"o=- 5 2 IN IP4 192.168.3.100\r\n"
"s=CounterPath Bria\r\n"
"c=IN IP4 174.37.XX.XXX\r\n"
"t=0 0\r\n"
"m=audio 64192 RTP/AVP 107 0 8 18 101\r\n"
"a=sendrecv\r\n"
"a=rtpmap:107 BV32/16000\r\n"
"a=rtpmap:18 G729/8000\r\n"
"a=fmtp:18 annexb=yes\r\n"
"a=rtpmap:101 telephone-event/8000\r\n"
"a=fmtp:101 0-15\r\n"
"a=nortpproxy:yes\r\n";
$var(c) = $(var(b){re.subst,|.*m=audio [0-9]+ RTP/AVP ([0-9 ]+).+|\1|s});
xlog("==================================: [$var(c)]\n");
And the xlog printed properly the value of $var(c) - meaning that it was
assigned the right value. I will test with avps next time I have a chance.
Cheers,
Daniel
On 7/26/10 9:11 PM, Brandon Armstead wrote:
Hello,
I have the following transformation on the SDP Body:
$(rb{re.subst,/^(.*)m=audio ([0-9]+) RTP\/AVP ([0-9
]+)\015\012(.*)$/\3/s})
However when I assign this to an AVP, i.e.
$avp(s:sdp-payloads) = $(rb{re.subst,/^(.*)m=audio ([0-9]+) RTP\/AVP
([0-9 ]+)\015\012(.*)$/\3/s});
I receive back a NULL result / transformation "regex does not match"
is what I receive with high verbose syslog on kamailio.
HOWEVER.
When I do something like this:
xlog("L_INFO", "Payloads Available: $(rb{re.subst,/^(.*)m=audio
([0-9]+) RTP\/AVP ([0-9 ]+)\015\012(.*)$/\3/s})");
It executes properly -- transformation regex matches and the payloads
are displayed as expected.
If anyone can provide any insight as to what I may be doing wrong it
would be greatly appreciated.
P.S. Kamailio SVN Revision # 2:5906M (1.5.2-notls).
Also I CC'ed devel list (as I do believe this may be a bug).
Thanks!
Sincerely,
Brandon Armstead
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
http://www.asipto.com/
28 Jul
28 Jul
10:23 a.m.
New subject: [SR-Users] Kamailio Transformation Assignment to an AVP
Hello,
I tested with:
xlog("===============================+++: [$rb]\n");
$var(b) = $rb;
$var(c) = $(rb{re.subst,|.*m=audio [0-9]+ RTP/AVP ([0-9 ]+).+|\1|s});
# $var(c) = $(var(b){re.subst,|.*m=audio [0-9]+ RTP/AVP ([0-9
]+).+|\1|s});
xlog("===============================+++: [$rb]\n");
xlog("==================================: [$var(c)]\n");
and everything looked fine. Could be something specific for your config
or environment, what is content-length of your invite?
Cheers,
Daniel
On 7/27/10 9:44 PM, brandon(a)cryy.com wrote:
Daniel,
I've also tried with script vars. I think it has something to do with
the actual dynamic psuedo variable $rb. Var assignment and mangling
does not work for me either. I.e. Keep everything the same except
$var(test) = $rb and so on. Let me know if this makes sense.
Sincerely,
Brandon Armstead
*Forgot to reply to ALL (resending)
Sent from my Verizon Wireless BlackBerry
------------------------------------------------------------------------
*From: * Daniel-Constantin Mierla <miconda(a)gmail.com>
*Date: *Tue, 27 Jul 2010 11:50:36 +0200
*To: *Brandon Armstead<brandon(a)cryy.com>
*Cc: *<users(a)lists.kamailio.org>rg>; <devel(a)lists.kamailio.org>
*Subject: *Re: [SR-Users] Kamailio Transformation Assignment to an AVP
Hello,
interesting, when I troubleshooted before your previous report, I used
this piece of cfg:
xlog("==================================\n");
$var(b) =
"v=0\r\n"
"o=- 5 2 IN IP4 192.168.3.100\r\n"
"s=CounterPath Bria\r\n"
"c=IN IP4 174.37.XX.XXX\r\n"
"t=0 0\r\n"
"m=audio 64192 RTP/AVP 107 0 8 18 101\r\n"
"a=sendrecv\r\n"
"a=rtpmap:107 BV32/16000\r\n"
"a=rtpmap:18 G729/8000\r\n"
"a=fmtp:18 annexb=yes\r\n"
"a=rtpmap:101 telephone-event/8000\r\n"
"a=fmtp:101 0-15\r\n"
"a=nortpproxy:yes\r\n";
$var(c) = $(var(b){re.subst,|.*m=audio [0-9]+ RTP/AVP ([0-9 ]+).+|\1|s});
xlog("==================================: [$var(c)]\n");
And the xlog printed properly the value of $var(c) - meaning that it
was assigned the right value. I will test with avps next time I have a
chance.
Cheers,
Daniel
On 7/26/10 9:11 PM, Brandon Armstead wrote:
--
Daniel-Constantin Mierla
http://www.asipto.com/
Hello,
I have the following transformation on the SDP Body:
$(rb{re.subst,/^(.*)m=audio ([0-9]+) RTP\/AVP ([0-9
]+)\015\012(.*)$/\3/s})
However when I assign this to an AVP, i.e.
$avp(s:sdp-payloads) = $(rb{re.subst,/^(.*)m=audio ([0-9]+) RTP\/AVP
([0-9 ]+)\015\012(.*)$/\3/s});
I receive back a NULL result / transformation "regex does not match"
is what I receive with high verbose syslog on kamailio.
HOWEVER.
When I do something like this:
xlog("L_INFO", "Payloads Available: $(rb{re.subst,/^(.*)m=audio
([0-9]+) RTP\/AVP ([0-9 ]+)\015\012(.*)$/\3/s})");
It executes properly -- transformation regex matches and the payloads
are displayed as expected.
If anyone can provide any insight as to what I may be doing wrong it
would be greatly appreciated.
P.S. Kamailio SVN Revision # 2:5906M (1.5.2-notls).
Also I CC'ed devel list (as I do believe this may be a bug).
Thanks!
Sincerely,
Brandon Armstead
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
http://www.asipto.com/
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
5:32 p.m.
New subject: [SR-Users] Kamailio Transformation Assignment to an AVP
Daniel,
When I take your example with the modified regex it works. I wonder if
there is any association to using / as delimiter versus | and the () match
references?
Sincerely,
Brandon Armstead
On Wed, Jul 28, 2010 at 3:23 AM, Daniel-Constantin Mierla <miconda(a)gmail.com
wrote:
Hello,
I tested with:
xlog("===============================+++: [$rb]\n");
$var(b) = $rb;
$var(c) = $(rb{re.subst,|.*m=audio [0-9]+ RTP/AVP ([0-9 ]+).+|\1|s});
# $var(c) = $(var(b){re.subst,|.*m=audio [0-9]+ RTP/AVP ([0-9
]+).+|\1|s});
xlog("===============================+++: [$rb]\n");
xlog("==================================: [$var(c)]\n");
and everything looked fine. Could be something specific for your config or
environment, what is content-length of your invite?
Cheers,
Daniel
On 7/27/10 9:44 PM, brandon(a)cryy.com wrote:
Daniel,
I've also tried with script vars. I think it has something to do with the
actual dynamic psuedo variable $rb. Var assignment and mangling does not
work for me either. I.e. Keep everything the same except $var(test) = $rb
and so on. Let me know if this makes sense.
Sincerely,
Brandon Armstead
*Forgot to reply to ALL (resending)
Sent from my Verizon Wireless BlackBerry
------------------------------
*From: * Daniel-Constantin Mierla <miconda(a)gmail.com> <miconda(a)gmail.com>
*Date: *Tue, 27 Jul 2010 11:50:36 +0200
*To: *Brandon Armstead<brandon(a)cryy.com> <brandon(a)cryy.com>
*Cc: *<users(a)lists.kamailio.org> <users(a)lists.kamailio.org>rg>;
<devel(a)lists.kamailio.org> <devel(a)lists.kamailio.org>
*Subject: *Re: [SR-Users] Kamailio Transformation Assignment to an AVP
Hello,
interesting, when I troubleshooted before your previous report, I used this
piece of cfg:
xlog("==================================\n");
$var(b) =
"v=0\r\n"
"o=- 5 2 IN IP4 192.168.3.100\r\n"
"s=CounterPath Bria\r\n"
"c=IN IP4 174.37.XX.XXX\r\n"
"t=0 0\r\n"
"m=audio 64192 RTP/AVP 107 0 8 18 101\r\n"
"a=sendrecv\r\n"
"a=rtpmap:107 BV32/16000\r\n"
"a=rtpmap:18 G729/8000\r\n"
"a=fmtp:18 annexb=yes\r\n"
"a=rtpmap:101 telephone-event/8000\r\n"
"a=fmtp:101 0-15\r\n"
"a=nortpproxy:yes\r\n";
$var(c) = $(var(b){re.subst,|.*m=audio [0-9]+ RTP/AVP ([0-9 ]+).+|\1|s});
xlog("==================================: [$var(c)]\n");
And the xlog printed properly the value of $var(c) - meaning that it was
assigned the right value. I will test with avps next time I have a chance.
Cheers,
Daniel
On 7/26/10 9:11 PM, Brandon Armstead wrote:
Hello,
I have the following transformation on the SDP Body:
$(rb{re.subst,/^(.*)m=audio ([0-9]+) RTP\/AVP ([0-9 ]+)\015\012(.*)$/\3/s})
However when I assign this to an AVP, i.e.
$avp(s:sdp-payloads) = $(rb{re.subst,/^(.*)m=audio ([0-9]+) RTP\/AVP ([0-9
]+)\015\012(.*)$/\3/s});
I receive back a NULL result / transformation "regex does not match" is
what I receive with high verbose syslog on kamailio.
HOWEVER.
When I do something like this:
xlog("L_INFO", "Payloads Available: $(rb{re.subst,/^(.*)m=audio ([0-9]+)
RTP\/AVP ([0-9 ]+)\015\012(.*)$/\3/s})");
It executes properly -- transformation regex matches and the payloads are
displayed as expected.
If anyone can provide any insight as to what I may be doing wrong it would
be greatly appreciated.
P.S. Kamailio SVN Revision # 2:5906M (1.5.2-notls).
Also I CC'ed devel list (as I do believe this may be a bug).
Thanks!
Sincerely,
Brandon Armstead
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierlahttp://www.asipto.com/
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierlahttp://www.asipto.com/
29 Jul
29 Jul
10:32 a.m.
New subject: [SR-Users] Kamailio Transformation Assignment to an AVP
Hello,
On 7/28/10 5:32 PM, Brandon Armstead wrote:
Daniel,
When I take your example with the modified regex it works. I
wonder if there is any association to using / as delimiter versus |
and the () match references?
hmm, might the / versus | in the way that you may need to use \\/ to
escape it -- just try and let me know if solves something. I used |
because I try to avoid escaping inside subst expressions and it works to
use any character you want (same like in sed tool - the character used
on first position is considered delimiter and has to be escaped when is
not).
Cheers,
Daniel
Sincerely,
Brandon Armstead
On Wed, Jul 28, 2010 at 3:23 AM, Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
Hello,
I tested with:
xlog("===============================+++: [$rb]\n");
$var(b) = $rb;
$var(c) = $(rb{re.subst,|.*m=audio [0-9]+ RTP/AVP ([0-9
]+).+|\1|s});
# $var(c) = $(var(b){re.subst,|.*m=audio [0-9]+ RTP/AVP ([0-9
]+).+|\1|s});
xlog("===============================+++: [$rb]\n");
xlog("==================================: [$var(c)]\n");
and everything looked fine. Could be something specific for your
config or environment, what is content-length of your invite?
Cheers,
Daniel
On 7/27/10 9:44 PM, brandon(a)cryy.com <mailto:brandon@cryy.com> wrote:
--
Daniel-Constantin Mierla
http://www.asipto.com/
Daniel,
I've also tried with script vars. I think it has something to do
with the actual dynamic psuedo variable $rb. Var assignment and
mangling does not work for me either. I.e. Keep everything the
same except $var(test) = $rb and so on. Let me know if this makes
sense.
Sincerely,
Brandon Armstead
*Forgot to reply to ALL (resending)
Sent from my Verizon Wireless BlackBerry
------------------------------------------------------------------------
*From: * Daniel-Constantin Mierla <miconda(a)gmail.com>
<mailto:miconda@gmail.com>
*Date: *Tue, 27 Jul 2010 11:50:36 +0200
*To: *Brandon Armstead<brandon(a)cryy.com> <mailto:brandon@cryy.com>
*Cc: *<users(a)lists.kamailio.org>
<mailto:users@lists.kamailio.org>; <devel(a)lists.kamailio.org>
<mailto:devel@lists.kamailio.org>
*Subject: *Re: [SR-Users] Kamailio Transformation Assignment to
an AVP
Hello,
interesting, when I troubleshooted before your previous report, I
used this piece of cfg:
xlog("==================================\n");
$var(b) =
"v=0\r\n"
"o=- 5 2 IN IP4 192.168.3.100\r\n"
"s=CounterPath Bria\r\n"
"c=IN IP4 174.37.XX.XXX\r\n"
"t=0 0\r\n"
"m=audio 64192 RTP/AVP 107 0 8 18 101\r\n"
"a=sendrecv\r\n"
"a=rtpmap:107 BV32/16000\r\n"
"a=rtpmap:18 G729/8000\r\n"
"a=fmtp:18 annexb=yes\r\n"
"a=rtpmap:101 telephone-event/8000\r\n"
"a=fmtp:101 0-15\r\n"
"a=nortpproxy:yes\r\n";
$var(c) = $(var(b){re.subst,|.*m=audio [0-9]+ RTP/AVP ([0-9
]+).+|\1|s});
xlog("==================================: [$var(c)]\n");
And the xlog printed properly the value of $var(c) - meaning that
it was assigned the right value. I will test with avps next time
I have a chance.
Cheers,
Daniel
On 7/26/10 9:11 PM, Brandon Armstead wrote:
--
Daniel-Constantin Mierla
http://www.asipto.com/
Hello,
I have the following transformation on the SDP Body:
$(rb{re.subst,/^(.*)m=audio ([0-9]+) RTP\/AVP ([0-9
]+)\015\012(.*)$/\3/s})
However when I assign this to an AVP, i.e.
$avp(s:sdp-payloads) = $(rb{re.subst,/^(.*)m=audio ([0-9]+)
RTP\/AVP ([0-9 ]+)\015\012(.*)$/\3/s});
I receive back a NULL result / transformation "regex does not
match" is what I receive with high verbose syslog on kamailio.
HOWEVER.
When I do something like this:
xlog("L_INFO", "Payloads Available: $(rb{re.subst,/^(.*)m=audio
([0-9]+) RTP\/AVP ([0-9 ]+)\015\012(.*)$/\3/s})");
It executes properly -- transformation regex matches and the
payloads are displayed as expected.
If anyone can provide any insight as to what I may be doing
wrong it would be greatly appreciated.
P.S. Kamailio SVN Revision # 2:5906M (1.5.2-notls).
Also I CC'ed devel list (as I do believe this may be a bug).
Thanks!
Sincerely,
Brandon Armstead
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
http://www.asipto.com/
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
5043
days inactive
5046
days old
5 comments
3 participants
participants (3)
-
Brandon Armstead -
brandon＠cryy.com
-
Daniel-Constantin Mierla