20 Nov
2009
20 Nov
'09
4:58 a.m.
Dear all!
Please help. I have problem dealing with recursive call in failure route.
this route happen first time for authentication to external SIP provider
(react on code 401), then it have response 480 i want to direct traffic
to another operator via cr_route.
First i relay INVITE and getting 401, then sending authentication, but
provider gives 480. I can see it in a dump of SIP session. But my
failure_route still thinking that reply code is 401 on second reply.
Maybe because i dont understand well how branches concept work here? Or
using kamailio 3.0? ;) Looks like it give me status code of first reply
and ignoring actual code in reply. :( I don't know if it something with
development version or my own misunderstanding. sorry
route[PSTN_RELAY] {
# open trans or it will complain on uac_replace_from
if (!t_check_trans()) t_newtran();
#!ifdef WITH_NAT
if (check_route_param("nat=yes")) {
setbflag("6");
}
if (isflagset(5) || isbflagset("6")) {
route(RTPPROXY);
}
#!endif
cr_user_carrier("$fU", "$fd", "$avp(s:carrier)");
xlog ("L_INFO","carrier $avp(s:carrier) selected for $fU at
$fd\n");
$avp(s:domain)="route_domain1";
if( !cr_route("$avp(s:carrier)", "$avp(s:domain)",
"$rU", "$rU",
"call_id") ){
sl_send_reply("403", "Not allowed");
xlog ("cr_route failed for $rU from $fU@$fd\n");
t_release();
exit;
}
#loading auth information for $rd (ruri domain) and replace "From"
header
route (LOAD_AUTH);
xlog ("L_INFO","relaying to $rd\n");
#reducing size to fit MTU
remove_hf("User-Agent");
remove_hf("P-Preferred-Identity");
remove_hf("Record-route");
remove_hf("a=nortpproxy");
# setflag(11); # so failroute can procees carrierroute backup
# we do all in one failure block;
t_on_failure("FAIL_ONE");
if (!t_relay()) {
sl_reply_error();
}
exit;
}
##### LOAD_AUTH ##########
# loading authentication information from carrierauth table
# set From field according to carrierauth information
# arguments:
# $rd - request uri doamin, sip provider carrier
# returns:
# avp(i:20) - rewrited host = $rd
# avp(i:21) - auth user
# avp(i:22) - auth pass
# avp(i:23) - auth realm
# avp(i:24) - auth domain
route[LOAD_AUTH]{
xlog ("L_INFO","searching authentication for $rd host");
$avp(i:20)=$rd;
if ( avp_db_query(
"SELECT username, password, realm, domain FROM carrierauth WHERE
hostname='$rd'",
"$avp(i:21);$avp(i:22);$avp(i:23);$avp(i:24)") > 0 ) {
xlog ("L_INFO"," for $rd got user: $avp(i:21) pass: $avp(i:22)
realm: $avp(i:23) domain: $avp(i:24)");
# replace from_user@from_domain
xlog("L_INFO","changing from -> sip:$avp(i:21)@$avp(i:24)");
uac_replace_from("sip:$avp(i:21)@$avp(i:24)");
}
# we are not relaying authentications :)
remove_hf("Authorization"); # remove client authentication
# reset flag to mark no authentication yet performed
resetflag(10); # let's use 10 to know uac authentication was sent
return(1);
}
failure_route[FAIL_ONE] {
xlog("L_INFO","failure reply: $T_rpl($rr) $T_rpl($rs) $T_reply_code
$branch(count) $rb\n");
#######
####### Here is a problem. Error code $T_reply_code is always 401 even
for second time... I have 480 on ngrep
#######
if ( t_check_status("401|407") ) # Unathorised reply
{ xlog("Authentication required \n");
# have we already tried to authenticate? do we have auth
information loaded?
if (isflagset(10) || $avp(i:21)==$null ) # auth was already sent
or we don't have auth info
{
xlog("Authentication to $avp(i:20) provider as
$avp(i:21)@$avp(i:24) failed\n");
t_reply("503","Authentication failed");
avp_delete("$avp(i:20)");
avp_delete("$avp(i:21)");
avp_delete("$avp(i:22)");
avp_delete("$avp(i:23)");
avp_delete("$avp(i:24)");
exit(); # :(
}
# if call from here LOAD_AUTH will look for original uri, not
rewriten before
if( !is_avp_set("$avp(i:20)") || $avp(i:20)=='') # if LAOD_AUTH
was not done yet
route (LOAD_AUTH); # loads auth avps and rewrite 'from' field
# this avps loaded before by LOAD_AUTH
# avp(i:20) - rewrited host
# avp(i:21) - auth user
# avp(i:22) - auth pass
# avp(i:23) - auth realm
# avp(i:24) - auth domain
remove_hf("Authorization"); # remove client authentication
if (uac_auth()) # adding auth header
{
xlog("L_INFO","Authorization header set, sending...");
# mark that auth was performed
setflag(10);
# trigger again the failure route
t_on_failure("FAIL_ONE");
# repeat the request with auth response this time
append_branch(); # ?
t_relay();
exit;
}
}
# In case of failure on PSTN provider, send it to an alternative route:
if ( t_check_status("408|5[0-9][0-9]")) {
# if ( isflagset(11) && t_check_status("408|5[0-9][0-9]")) {
revert_uri();
if (!cr_next_domain("$avp(s:carrier)", "$avp(s:domain)",
"$rU",
"$rd", "$T_reply_code", "$avp(s:domain)")) {
xlog("L_ERR", "cr_next_domain failed\n");
exit;
}
if (!cr_route("$avp(s:carrier)", "$avp(s:domain)",
"$rU", "$rU",
"call_id")) {
xlog("L_ERR", "cr_route failed\n");
exit;
}
route(LOAD_AUTH);
t_on_failure("FAIL_ONE");
append_branch();
if (!t_relay()) {
xlog("L_ERR", "t_relay to $rd failed\n");
exit;
}
}
#!ifdef WITH_NAT
if (is_method("INVITE")
&& (isbflagset("6") || isflagset(5))) {
unforce_rtp_proxy();
}
#!endif
if (t_is_canceled()) {
exit;
}
# uncomment the following lines if you want to block client
# redirect based on 3xx replies.
##if (t_check_status("3[0-9][0-9]")) {
##t_reply("404","Not found");
## exit;
##}
# uncomment the following lines if you want to redirect the failed
# calls to a different new destination
##if (t_check_status("486|408")) {
## sethostport("192.168.2.100:5060");
## append_branch();
## # do not set the missed call flag again
## t_relay();
##}
}
20 Nov
20 Nov
1:53 p.m.
On 11/20/2009 12:58 AM, Andres Moya wrote:
Dear all!
Please help. I have problem dealing with recursive call in failure route.
this route happen first time for authentication to external SIP provider
(react on code 401), then it have response 480 i want to direct traffic
to another operator via cr_route.
First i relay INVITE and getting 401, then sending authentication, but
provider gives 480. I can see it in a dump of SIP session. But my
failure_route still thinking that reply code is 401 on second reply.
Maybe because i dont understand well how branches concept work here? Or
using kamailio 3.0? ;) Looks like it give me status code of first reply
and ignoring actual code in reply. :( I don't know if it something with
development version or my own misunderstanding. sorry
This is correct, the proxy must choose one of the two responses to
forward and 401 has higher precedence than 480 (RFC3261, 16.7: "Choosing
the best response"). The failure route always works on the selected
response as opposed to the last response received.
Try to add t_drop_replies() to the failure route block when the 401 is
processed. This function drops all the existing replies, 401 in your
case, hence 401 will not be selected again when 480 is received.
Miklos
route[PSTN_RELAY] {
# open trans or it will complain on uac_replace_from
if (!t_check_trans()) t_newtran();
#!ifdef WITH_NAT
if (check_route_param("nat=yes")) {
setbflag("6");
}
if (isflagset(5) || isbflagset("6")) {
route(RTPPROXY);
}
#!endif
cr_user_carrier("$fU", "$fd", "$avp(s:carrier)");
xlog ("L_INFO","carrier $avp(s:carrier) selected for $fU at
$fd\n");
$avp(s:domain)="route_domain1";
if( !cr_route("$avp(s:carrier)", "$avp(s:domain)",
"$rU", "$rU",
"call_id") ){
sl_send_reply("403", "Not allowed");
xlog ("cr_route failed for $rU from $fU@$fd\n");
t_release();
exit;
}
#loading auth information for $rd (ruri domain) and replace "From"
header
route (LOAD_AUTH);
xlog ("L_INFO","relaying to $rd\n");
#reducing size to fit MTU
remove_hf("User-Agent");
remove_hf("P-Preferred-Identity");
remove_hf("Record-route");
remove_hf("a=nortpproxy");
# setflag(11); # so failroute can procees carrierroute backup
# we do all in one failure block;
t_on_failure("FAIL_ONE");
if (!t_relay()) {
sl_reply_error();
}
exit;
}
##### LOAD_AUTH ##########
# loading authentication information from carrierauth table
# set From field according to carrierauth information
# arguments:
# $rd - request uri doamin, sip provider carrier
# returns:
# avp(i:20) - rewrited host = $rd
# avp(i:21) - auth user
# avp(i:22) - auth pass
# avp(i:23) - auth realm
# avp(i:24) - auth domain
route[LOAD_AUTH]{
xlog ("L_INFO","searching authentication for $rd host");
$avp(i:20)=$rd;
if ( avp_db_query(
"SELECT username, password, realm, domain FROM carrierauth WHERE
hostname='$rd'",
"$avp(i:21);$avp(i:22);$avp(i:23);$avp(i:24)") > 0 ) {
xlog ("L_INFO"," for $rd got user: $avp(i:21) pass: $avp(i:22)
realm: $avp(i:23) domain: $avp(i:24)");
# replace from_user@from_domain
xlog("L_INFO","changing from -> sip:$avp(i:21)@$avp(i:24)");
uac_replace_from("sip:$avp(i:21)@$avp(i:24)");
}
# we are not relaying authentications :)
remove_hf("Authorization"); # remove client authentication
# reset flag to mark no authentication yet performed
resetflag(10); # let's use 10 to know uac authentication was sent
return(1);
}
failure_route[FAIL_ONE] {
xlog("L_INFO","failure reply: $T_rpl($rr) $T_rpl($rs) $T_reply_code
$branch(count) $rb\n");
#######
####### Here is a problem. Error code $T_reply_code is always 401 even
for second time... I have 480 on ngrep
#######
if ( t_check_status("401|407") ) # Unathorised reply
{ xlog("Authentication required \n");
# have we already tried to authenticate? do we have auth
information loaded?
if (isflagset(10) || $avp(i:21)==$null ) # auth was already sent or
we don't have auth info
{
xlog("Authentication to $avp(i:20) provider as
$avp(i:21)@$avp(i:24) failed\n");
t_reply("503","Authentication failed");
avp_delete("$avp(i:20)");
avp_delete("$avp(i:21)");
avp_delete("$avp(i:22)");
avp_delete("$avp(i:23)");
avp_delete("$avp(i:24)");
exit(); # :(
}
# if call from here LOAD_AUTH will look for original uri, not
rewriten before
if( !is_avp_set("$avp(i:20)") || $avp(i:20)=='') # if LAOD_AUTH
was
not done yet
route (LOAD_AUTH); # loads auth avps and rewrite 'from' field
# this avps loaded before by LOAD_AUTH
# avp(i:20) - rewrited host
# avp(i:21) - auth user
# avp(i:22) - auth pass
# avp(i:23) - auth realm
# avp(i:24) - auth domain
remove_hf("Authorization"); # remove client authentication
if (uac_auth()) # adding auth header
{
xlog("L_INFO","Authorization header set, sending...");
# mark that auth was performed
setflag(10);
# trigger again the failure route
t_on_failure("FAIL_ONE");
# repeat the request with auth response this time
append_branch(); # ?
t_relay();
exit;
}
}
# In case of failure on PSTN provider, send it to an alternative route:
if ( t_check_status("408|5[0-9][0-9]")) {
# if ( isflagset(11) && t_check_status("408|5[0-9][0-9]")) {
revert_uri();
if (!cr_next_domain("$avp(s:carrier)", "$avp(s:domain)",
"$rU",
"$rd", "$T_reply_code", "$avp(s:domain)")) {
xlog("L_ERR", "cr_next_domain failed\n");
exit;
}
if (!cr_route("$avp(s:carrier)", "$avp(s:domain)",
"$rU", "$rU",
"call_id")) {
xlog("L_ERR", "cr_route failed\n");
exit;
}
route(LOAD_AUTH);
t_on_failure("FAIL_ONE");
append_branch();
if (!t_relay()) {
xlog("L_ERR", "t_relay to $rd failed\n");
exit;
}
}
#!ifdef WITH_NAT
if (is_method("INVITE")
&& (isbflagset("6") || isflagset(5))) {
unforce_rtp_proxy();
}
#!endif
if (t_is_canceled()) {
exit;
}
# uncomment the following lines if you want to block client
# redirect based on 3xx replies.
##if (t_check_status("3[0-9][0-9]")) {
##t_reply("404","Not found");
## exit;
##}
# uncomment the following lines if you want to redirect the failed
# calls to a different new destination
##if (t_check_status("486|408")) {
## sethostport("192.168.2.100:5060");
## append_branch();
## # do not set the missed call flag again
## t_relay();
##}
}
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
8:38 p.m.
On 20.11.2009 9:53 Uhr, Miklos Tirpak wrote:
On 11/20/2009 12:58 AM, Andres Moya wrote:
I think this is wrong
imo, if I got it right from your email, because
the failure route should work on a selected reply from the last set of
branches in serial forking.
Do you say that if I get 301 with couple of contacts, then in failure
route I create new branches, relay, all failed because of timeout and/or
busy, I get back in failure route with the 301?
I cannot drop all replies because maybe the reply I want to be sent back
to caller is from a previous branch. Think at:
A calls B
B phone gives busy
B has redirect to C in such case
C phone gives timeout
C has now redirect to voice mail
Voice mail returns server failure
If I need to drop the replies then I will send the 500 reply which is
wrong. If I do no drop replies, then it is hard to implement the proper
logic for different kinds of redirects:
- no answer
- busy
Cheers,
Daniel
Dear all!
Please help. I have problem dealing with recursive call in failure
route.
this route happen first time for authentication to external SIP
provider (react on code 401), then it have response 480 i want to
direct traffic to another operator via cr_route.
First i relay INVITE and getting 401, then sending authentication,
but provider gives 480. I can see it in a dump of SIP session. But my
failure_route still thinking that reply code is 401 on second reply.
Maybe because i dont understand well how branches concept work here?
Or using kamailio 3.0? ;) Looks like it give me status code of first
reply and ignoring actual code in reply. :( I don't know if it
something with development version or my own misunderstanding. sorry
This is correct, the proxy must choose one of the two responses to
forward and 401 has higher precedence than 480 (RFC3261, 16.7:
"Choosing the best response"). The failure route always works on the
selected response as opposed to the last response received.
Try to add t_drop_replies() to the failure route block when the 401 is
processed. This function drops all the existing replies, 401 in your
case, hence 401 will not be selected again when 480 is received.
--
Daniel-Constantin Mierla
* http://www.asipto.com/
8:53 p.m.
On 20.11.2009 16:38 Uhr, Daniel-Constantin Mierla wrote:
On 20.11.2009 9:53 Uhr, Miklos Tirpak wrote:
... actually, while it might be questionable whether to select the reply
to be sent back to caller from last serial forking set of branches or
from entire set of branches, triggering failure route should be with a
reply from last set of branches, otherwise you cannot take the right
decision for new branches.
Cheers,
Daniel
On 11/20/2009 12:58 AM, Andres Moya wrote:
I think this is wrong
imo, if I got it right from your email, because
the failure route should work on a selected reply from the last set of
branches in serial forking.
Do you say that if I get 301 with couple of contacts, then in failure
route I create new branches, relay, all failed because of timeout
and/or busy, I get back in failure route with the 301?
I cannot drop all replies because maybe the reply I want to be sent
back to caller is from a previous branch. Think at:
A calls B
B phone gives busy
B has redirect to C in such case
C phone gives timeout
C has now redirect to voice mail
Voice mail returns server failure
If I need to drop the replies then I will send the 500 reply which is
wrong. Dear all!
Please help. I have problem dealing with recursive call in failure
route.
this route happen first time for authentication to external SIP
provider (react on code 401), then it have response 480 i want to
direct traffic to another operator via cr_route.
First i relay INVITE and getting 401, then sending authentication,
but provider gives 480. I can see it in a dump of SIP session. But
my failure_route still thinking that reply code is 401 on second
reply. Maybe because i dont understand well how branches concept
work here? Or using kamailio 3.0? ;) Looks like it give me status
code of first reply and ignoring actual code in reply. :( I don't
know if it something with development version or my own
misunderstanding. sorry
This is correct, the proxy must choose one of the two responses to
forward and 401 has higher precedence than 480 (RFC3261, 16.7:
"Choosing the best response"). The failure route always works on the
selected response as opposed to the last response received. If I do no drop replies, then it is hard to implement
the proper logic
for different kinds of redirects:
- no answer
- busy
Cheers,
Daniel
--
Daniel-Constantin Mierla
* http://www.asipto.com/
Try to add t_drop_replies() to the failure route block when the 401
is processed. This function drops all the existing replies, 401 in
your case, hence 401 will not be selected again when 480 is received.
8:57 p.m.
Daniel-Constantin Mierla píše v Pá 20. 11. 2009 v 16:53 +0100:
On 20.11.2009 16:38 Uhr, Daniel-Constantin Mierla wrote:
If I understand correctly, then whenever you start above mentioned "new
set of branches" just call t_drop_replies() and you are done.
Michal
On 20.11.2009 9:53 Uhr, Miklos Tirpak wrote:
... actually, while it might be questionable whether to select the reply
to be sent back to caller from last serial forking set of branches or
from entire set of branches, triggering failure route should be with a
reply from last set of branches, otherwise you cannot take the right
decision for new branches. On 11/20/2009 12:58 AM, Andres Moya wrote:
I think this is wrong
imo, if I got it right from your email, because
the failure route should work on a selected reply from the last set of
branches in serial forking.
Do you say that if I get 301 with couple of contacts, then in failure
route I create new branches, relay, all failed because of timeout
and/or busy, I get back in failure route with the 301?
I cannot drop all replies because maybe the reply I want to be sent
back to caller is from a previous branch. Think at:
A calls B
B phone gives busy
B has redirect to C in such case
C phone gives timeout
C has now redirect to voice mail
Voice mail returns server failure
If I need to drop the replies then I will send the 500 reply which is
wrong. Dear all!
Please help. I have problem dealing with recursive call in failure
route.
this route happen first time for authentication to external SIP
provider (react on code 401), then it have response 480 i want to
direct traffic to another operator via cr_route.
First i relay INVITE and getting 401, then sending authentication,
but provider gives 480. I can see it in a dump of SIP session. But
my failure_route still thinking that reply code is 401 on second
reply. Maybe because i dont understand well how branches concept
work here? Or using kamailio 3.0? ;) Looks like it give me status
code of first reply and ignoring actual code in reply. :( I don't
know if it something with development version or my own
misunderstanding. sorry
This is correct, the proxy must choose one of the two responses to
forward and 401 has higher precedence than 480 (RFC3261, 16.7:
"Choosing the best response"). The failure route always works on the
selected response as opposed to the last response received.
Cheers,
Daniel
If I do no drop replies, then it is hard to
implement the proper logic
for different kinds of redirects:
- no answer
- busy
Cheers,
Daniel
Try to add t_drop_replies() to the failure route block when the 401
is processed. This function drops all the existing replies, 401 in
your case, hence 401 will not be selected again when 480 is received.
9:21 p.m.
Hi,
On 11/20/2009 04:57 PM, Michal Matyska wrote:
Daniel-Constantin Mierla píše v Pá 20. 11. 2009 v
16:53 +0100:
yes, you can solve it this way.
Back to Daniel's example, if I was the caller then I would like to
receive the 486 back so that I know that the callee is busy and I should
retry the call later. This means that the 408 should be dropped, but
only if there was already a branch replied with 486. Or the 408 should
be given some preference from failure route. Neither of them is
implemented as far as I know.
On the other hand, the script can get really complicated because of
these checks and drops.
Miklos
On 20.11.2009 16:38 Uhr, Daniel-Constantin Mierla
wrote:
If I understand correctly, then whenever you start above mentioned "new
set of branches" just call t_drop_replies() and you are done.
On 20.11.2009 9:53 Uhr, Miklos Tirpak wrote:
... actually, while it might be questionable whether to select the reply
to be sent back to caller from last serial forking set of branches or
from entire set of branches, triggering failure route should be with a
reply from last set of branches, otherwise you cannot take the right
decision for new branches. On 11/20/2009 12:58 AM, Andres Moya wrote:
> Dear all!
>
> Please help. I have problem dealing with recursive call in failure
> route.
>
> this route happen first time for authentication to external SIP
> provider (react on code 401), then it have response 480 i want to
> direct traffic to another operator via cr_route.
>
> First i relay INVITE and getting 401, then sending authentication,
> but provider gives 480. I can see it in a dump of SIP session. But
> my failure_route still thinking that reply code is 401 on second
> reply. Maybe because i dont understand well how branches concept
> work here? Or using kamailio 3.0? ;) Looks like it give me status
> code of first reply and ignoring actual code in reply. :( I don't
> know if it something with development version or my own
> misunderstanding. sorry
This is correct, the proxy must choose one of the two responses to
forward and 401 has higher precedence than 480 (RFC3261, 16.7:
"Choosing the best response"). The failure route always works on the
selected response as opposed to the last response received.
I think this is wrong
imo, if I got it right from your email, because
the failure route should work on a selected reply from the last set of
branches in serial forking.
Do you say that if I get 301 with couple of contacts, then in failure
route I create new branches, relay, all failed because of timeout
and/or busy, I get back in failure route with the 301?
I cannot drop all replies because maybe the reply I want to be sent
back to caller is from a previous branch. Think at:
A calls B
B phone gives busy
B has redirect to C in such case
C phone gives timeout
C has now redirect to voice mail
Voice mail returns server failure
If I need to drop the replies then I will send the 500 reply which is
wrong.
Michal
> Cheers,
> Daniel
>
>
>> If I do no drop replies, then it is hard to implement the proper logic
>> for different kinds of redirects:
>> - no answer
>> - busy
>>
>> Cheers,
>> Daniel
>>
>>> Try to add t_drop_replies() to the failure route block when the 401
>>> is processed. This function drops all the existing replies, 401 in
>>> your case, hence 401 will not be selected again when 480 is received.
9:21 p.m.
On 20.11.2009 16:57 Uhr, Michal Matyska wrote:
Daniel-Constantin Mierla píše v Pá 20. 11. 2009 v
16:53 +0100:
i said "questionable about selection of reply to send back but not about
what code is presented to failure route". So yes, if I want only from
last set of branches, it is ok what you say. But if not, then you are
screwed up with serial forking logic.
the t_drop_replies() drops all branches, even there were two or more
serial forking steps, not the replies from the last set of branches -- I
checked the code. It just not look coherent.
Cheers,
Daniel
--
Daniel-Constantin Mierla
* http://www.asipto.com/
On 20.11.2009 16:38 Uhr, Daniel-Constantin Mierla
wrote:
If I understand correctly, then whenever you start above mentioned "new
set of branches" just call t_drop_replies() and you are done.
On 20.11.2009 9:53 Uhr, Miklos Tirpak wrote:
... actually, while it might be questionable whether to select the reply
to be sent back to caller from last serial forking set of branches or
from entire set of branches, triggering failure route should be with a
reply from last set of branches, otherwise you cannot take the right
decision for new branches.
On 11/20/2009 12:58 AM, Andres Moya wrote:
> Dear all!
>
> Please help. I have problem dealing with recursive call in failure
> route.
>
> this route happen first time for authentication to external SIP
> provider (react on code 401), then it have response 480 i want to
> direct traffic to another operator via cr_route.
>
> First i relay INVITE and getting 401, then sending authentication,
> but provider gives 480. I can see it in a dump of SIP session. But
> my failure_route still thinking that reply code is 401 on second
> reply. Maybe because i dont understand well how branches concept
> work here? Or using kamailio 3.0? ;) Looks like it give me status
> code of first reply and ignoring actual code in reply. :( I don't
> know if it something with development version or my own
> misunderstanding. sorry
>
This is correct, the proxy must choose one of the two responses to
forward and 401 has higher precedence than 480 (RFC3261, 16.7:
"Choosing the best response"). The failure route always works on the
selected response as opposed to the last response received.
I think this is wrong imo, if I got it right from your email, because
the failure route should work on a selected reply from the last set of
branches in serial forking.
Do you say that if I get 301 with couple of contacts, then in failure
route I create new branches, relay, all failed because of timeout
and/or busy, I get back in failure route with the 301?
I cannot drop all replies because maybe the reply I want to be sent
back to caller is from a previous branch. Think at:
A calls B
B phone gives busy
B has redirect to C in such case
C phone gives timeout
C has now redirect to voice mail
Voice mail returns server failure
If I need to drop the replies then I will send the 500 reply which is
wrong.
9:04 p.m.
Hi Daniel,
On 11/20/2009 04:38 PM, Daniel-Constantin Mierla wrote:
On 20.11.2009 9:53 Uhr, Miklos Tirpak wrote:
yes.
On 11/20/2009 12:58 AM, Andres Moya wrote:
I think this is wrong
imo, if I got it right from your email, because
the failure route should work on a selected reply from the last set of
branches in serial forking.
Do you say that if I get 301 with couple of contacts, then in failure
route I create new branches, relay, all failed because of timeout and/or
busy, I get back in failure route with the 301? Dear all!
Please help. I have problem dealing with recursive call in failure
route.
this route happen first time for authentication to external SIP
provider (react on code 401), then it have response 480 i want to
direct traffic to another operator via cr_route.
First i relay INVITE and getting 401, then sending authentication,
but provider gives 480. I can see it in a dump of SIP session. But my
failure_route still thinking that reply code is 401 on second reply.
Maybe because i dont understand well how branches concept work here?
Or using kamailio 3.0? ;) Looks like it give me status code of first
reply and ignoring actual code in reply. :( I don't know if it
something with development version or my own misunderstanding. sorry
This is correct, the proxy must choose one of the two responses to
forward and 401 has higher precedence than 480 (RFC3261, 16.7:
"Choosing the best response"). The failure route always works on the
selected response as opposed to the last response received.
I cannot drop all replies because maybe the reply I want to be sent back
to caller is from a previous branch. Think at:
A calls B
B phone gives busy
B has redirect to C in such case
C phone gives timeout
C has now redirect to voice mail
Voice mail returns server failure
If I need to drop the replies then I will send the 500 reply which is
wrong. If I do no drop replies, then it is hard to implement the proper
logic for different kinds of redirects:
- no answer
- busy
Yes, the above case is quite complicated, by default I think the 408
will be sent back because it is the lowest response code.
The priority list is: 6xx > 3xx > 4xx > 5xx.
The lowest response wins within the class but 401, 407, 415, 420, 484
are preferred over other 4xx responses.
If this is an issue then we can implement more sophisticated drop
commands that drop only selected branches, for example a single branch
that is being processed in failure route.
Miklos
Cheers,
Daniel
Try to add t_drop_replies() to the failure route block when the 401 is
processed. This function drops all the existing replies, 401 in your
case, hence 401 will not be selected again when 480 is received.
9:32 p.m.
Hello,
On 20.11.2009 17:04 Uhr, Miklos Tirpak wrote:
Hi Daniel,
On 11/20/2009 04:38 PM, Daniel-Constantin Mierla wrote:
also 487 (request canceled) has the highest
priority.
On 20.11.2009 9:53 Uhr, Miklos Tirpak wrote:
yes.
On 11/20/2009 12:58 AM, Andres Moya wrote:
I think this is wrong
imo, if I got it right from your email, because
the failure route should work on a selected reply from the last set
of branches in serial forking.
Do you say that if I get 301 with couple of contacts, then in failure
route I create new branches, relay, all failed because of timeout
and/or busy, I get back in failure route with the 301? Dear all!
Please help. I have problem dealing with recursive call in failure
route.
this route happen first time for authentication to external SIP
provider (react on code 401), then it have response 480 i want to
direct traffic to another operator via cr_route.
First i relay INVITE and getting 401, then sending authentication,
but provider gives 480. I can see it in a dump of SIP session. But
my failure_route still thinking that reply code is 401 on second
reply. Maybe because i dont understand well how branches concept
work here? Or using kamailio 3.0? ;) Looks like it give me status
code of first reply and ignoring actual code in reply. :( I don't
know if it something with development version or my own
misunderstanding. sorry
This is correct, the proxy must choose one of the two responses to
forward and 401 has higher precedence than 480 (RFC3261, 16.7:
"Choosing the best response"). The failure route always works on the
selected response as opposed to the last response received.
I cannot drop all replies because maybe the reply I want to be sent
back to caller is from a previous branch. Think at:
A calls B
B phone gives busy
B has redirect to C in such case
C phone gives timeout
C has now redirect to voice mail
Voice mail returns server failure
If I need to drop the replies then I will send the 500 reply which is
wrong. If I do no drop replies, then it is hard to implement the
proper logic for different kinds of redirects:
- no answer
- busy
Yes, the above case is quite complicated, by default I think the 408
will be sent back because it is the lowest response code.
The priority list is: 6xx > 3xx > 4xx > 5xx.
The lowest response wins within the class but 401, 407, 415, 420, 484
are preferred over other 4xx responses.
If this is an issue then we can implement more sophisticated drop
commands that drop only selected branches, for example a single branch
that is being processed in failure route.
It just looks a bit unpredictable right now, mainly with what happens in
failure route because the reply code presented there is not what is
expected. So I would add a parameter:
t_drop_replies("all");
t_drop_replies("last");
It is not hard to implement at all. In SR is a flag to mark the start of
last set of branches -- so getting the first branch in the last step
would be:
for(first_branch=t->nr_of_outgoings-1; first_branch>=0; first_branch--)
if(t->uac[first_branch].flags&TM_UAC_FLAG_FB)
break;
But I would do it opposite, to have script simpler (and be K compatible
and have uac_redirect and other k modules work as expected :-) ),
instead of drop function, have drop by default the replies from last set
of branches, and then t_keep_replies() so one ca decide to keep the
replies. Probably can be switched one way or another (K or S) but config
compatibility mode.
Cheers,
Daniel
Miklos
>
> Cheers,
> Daniel
>
>>
>> Try to add t_drop_replies() to the failure route block when the 401
>> is processed. This function drops all the existing replies, 401 in
>> your case, hence 401 will not be selected again when 480 is received.
>
--
Daniel-Constantin Mierla
* http://www.asipto.com/
9:36 p.m.
On 20.11.2009 17:32 Uhr, Daniel-Constantin Mierla wrote:
Hello,
On 20.11.2009 17:04 Uhr, Miklos Tirpak wrote:
Hi Daniel,
On 11/20/2009 04:38 PM, Daniel-Constantin Mierla wrote:
also 487 (request canceled) has the
highest priority.
On 20.11.2009 9:53 Uhr, Miklos Tirpak wrote:
yes.
On 11/20/2009 12:58 AM, Andres Moya wrote:
> Dear all!
>
> Please help. I have problem dealing with recursive call in failure
> route.
>
> this route happen first time for authentication to external SIP
> provider (react on code 401), then it have response 480 i want to
> direct traffic to another operator via cr_route.
>
> First i relay INVITE and getting 401, then sending authentication,
> but provider gives 480. I can see it in a dump of SIP session. But
> my failure_route still thinking that reply code is 401 on second
> reply. Maybe because i dont understand well how branches concept
> work here? Or using kamailio 3.0? ;) Looks like it give me status
> code of first reply and ignoring actual code in reply. :( I don't
> know if it something with development version or my own
> misunderstanding. sorry
This is correct, the proxy must choose one of the two responses to
forward and 401 has higher precedence than 480 (RFC3261, 16.7:
"Choosing the best response"). The failure route always works on
the selected response as opposed to the last response received.
I think this is
wrong imo, if I got it right from your email,
because the failure route should work on a selected reply from the
last set of branches in serial forking.
Do you say that if I get 301 with couple of contacts, then in
failure route I create new branches, relay, all failed because of
timeout and/or busy, I get back in failure route with the 301?
I cannot drop all replies because maybe the reply I want to be sent
back to caller is from a previous branch. Think at:
A calls B
B phone gives busy
B has redirect to C in such case
C phone gives timeout
C has now redirect to voice mail
Voice mail returns server failure
If I need to drop the replies then I will send the 500 reply which
is wrong. If I do no drop replies, then it is hard to implement the
proper logic for different kinds of redirects:
- no answer
- busy
Yes, the above case is quite complicated, by default I think the 408
will be sent back because it is the lowest response code.
The priority list is: 6xx > 3xx > 4xx > 5xx.
The lowest response wins within the class but 401, 407, 415, 420, 484
are preferred over other 4xx responses.
If this is an issue then we can implement more sophisticated drop
commands that drop only selected branches, for example a single
branch that is being processed in failure route.
It just looks a bit unpredictable right now, mainly with what happens
in failure route because the reply code presented there is not what is
expected. So I would add a parameter:
t_drop_replies("all");
t_drop_replies("last");
It is not hard to implement at all. In SR is a flag to mark the start
of last set of branches -- so getting the first branch in the last
step would be:
for(first_branch=t->nr_of_outgoings-1; first_branch>=0;
first_branch--)
if(t->uac[first_branch].flags&TM_UAC_FLAG_FB)
break;
But I would do it opposite, to have script simpler (and be K
compatible and have uac_redirect and other k modules work as expected
:-) ), instead of drop function, have drop by default the replies from
last set of branches, and then t_keep_replies() so one ca decide to
keep the replies. Probably can be switched one way or another (K or S) but config compatibility mode.
errata: by config compatibility mode (e.g., #!KAMAILIO and #!SER)
Cheers,
Daniel
--
Daniel-Constantin Mierla
* http://www.asipto.com/
Miklos
>
> Cheers,
> Daniel
>
>>
>> Try to add t_drop_replies() to the failure route block when the 401
>> is processed. This function drops all the existing replies, 401 in
>> your case, hence 401 will not be selected again when 480 is received.
>
10:02 p.m.
On 11/20/2009 05:32 PM, Daniel-Constantin Mierla wrote:
Hello,
On 20.11.2009 17:04 Uhr, Miklos Tirpak wrote:
This sounds good!
Hi Daniel,
On 11/20/2009 04:38 PM, Daniel-Constantin Mierla wrote:
also 487 (request canceled) has the
highest priority.
On 20.11.2009 9:53 Uhr, Miklos Tirpak wrote:
yes.
On 11/20/2009 12:58 AM, Andres Moya wrote:
> Dear all!
>
> Please help. I have problem dealing with recursive call in failure
> route.
>
> this route happen first time for authentication to external SIP
> provider (react on code 401), then it have response 480 i want to
> direct traffic to another operator via cr_route.
>
> First i relay INVITE and getting 401, then sending authentication,
> but provider gives 480. I can see it in a dump of SIP session. But
> my failure_route still thinking that reply code is 401 on second
> reply. Maybe because i dont understand well how branches concept
> work here? Or using kamailio 3.0? ;) Looks like it give me status
> code of first reply and ignoring actual code in reply. :( I don't
> know if it something with development version or my own
> misunderstanding. sorry
This is correct, the proxy must choose one of the two responses to
forward and 401 has higher precedence than 480 (RFC3261, 16.7:
"Choosing the best response"). The failure route always works on the
selected response as opposed to the last response received.
I think this is wrong
imo, if I got it right from your email, because
the failure route should work on a selected reply from the last set
of branches in serial forking.
Do you say that if I get 301 with couple of contacts, then in failure
route I create new branches, relay, all failed because of timeout
and/or busy, I get back in failure route with the 301?
I cannot drop all replies because maybe the reply I want to be sent
back to caller is from a previous branch. Think at:
A calls B
B phone gives busy
B has redirect to C in such case
C phone gives timeout
C has now redirect to voice mail
Voice mail returns server failure
If I need to drop the replies then I will send the 500 reply which is
wrong. If I do no drop replies, then it is hard to implement the
proper logic for different kinds of redirects:
- no answer
- busy
Yes, the above case is quite complicated, by default I think the 408
will be sent back because it is the lowest response code.
The priority list is: 6xx > 3xx > 4xx > 5xx.
The lowest response wins within the class but 401, 407, 415, 420, 484
are preferred over other 4xx responses.
If this is an issue then we can implement more sophisticated drop
commands that drop only selected branches, for example a single branch
that is being processed in failure route.
It just looks a bit unpredictable right now, mainly with what happens in
failure route because the reply code presented there is not what is
expected. So I would add a parameter:
t_drop_replies("all");
t_drop_replies("last");
It is not hard to implement at all. In SR is a flag to
mark the start of
last set of branches -- so getting the first branch in the last step
would be:
for(first_branch=t->nr_of_outgoings-1; first_branch>=0; first_branch--)
if(t->uac[first_branch].flags&TM_UAC_FLAG_FB)
break;
t_drop_replies("last") may be a bit confusing if it is called from
failure route, imagine the following case:
1. A calls B
2. B does not answer -> 408
3. B has redirect to C
4. C is busy -> 486
5. reply route is executed with the lowest response code received that
is 408 in this case.
If t_drop_replies("last") is called in 5) then it will drop the 486
although 408 is being processed. This means that it is hard to check in
5) whether to call t_drop_replies("last") because all the conditions
work on the 408. So "last" means the last branches not the last
processed by failure route.
Anyway, this may be a corner case, and it is still better than we
currently have. It may also make sense to drop a reply from reply_route
because the status code of the reply can be checked without being
affected by the other replies. Something like t_drop_replies("current")
But I would do it opposite, to have script simpler
(and be K compatible
and have uac_redirect and other k modules work as expected :-) ),
instead of drop function, have drop by default the replies from last set
of branches, and then t_keep_replies() so one ca decide to keep the
replies. Probably can be switched one way or another (K or S) but config
compatibility mode.
I am fine with this of course, we just need to have the drop capability
in one or another way.
Thanks,
Miklos
Cheers,
Daniel
Miklos
>
> Cheers,
> Daniel
>
>>
>> Try to add t_drop_replies() to the failure route block when the 401
>> is processed. This function drops all the existing replies, 401 in
>> your case, hence 401 will not be selected again when 480 is received.
>
5272
days inactive
5273
days old
10 comments
4 participants
participants (4)
-
Andres Moya -
Daniel-Constantin Mierla -
Michal Matyska -
Miklos Tirpak