hai team,
version: kamailio 4.4.3 (x86_64/linux) flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown
modules loaded in kam.cfg ### LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR debug=3 log_stderror=no
memdbg=5 memlog=5
log_facility=LOG_LOCAL0
fork=yes children=4
/* uncomment the next line to disable TCP (default on) */ #disable_tcp=yes
/* uncomment the next line to disable the auto discovery of local aliases based on reverse DNS on IPs (default on) */ #auto_aliases=no
/* add local domain aliases */ alias=ALIAS
/* uncomment and configure the following line if you want Kamailio to bind on a specific interface/port/proto (default bind on all available) */ mhomed=1 #listen=VTRAN:VIP:VPORT #listen=tcp:CCEIP:CCEPORT
#/* port to listen to # * - can be specified more than once if needed to listen on many ports */ #port=5060
#enable_tls=yes
# life time of TCP connection when there is no traffic # - a bit higher than registration expires to cope with UA behind NAT #tcp_connection_lifetime=3605
####### Modules Section ########
mpath="/usr/local/lib64/kamailio/modules/"
loadmodule "db_mysql.so" loadmodule "ipops.so" loadmodule "mi_fifo.so" loadmodule "kex.so" loadmodule "corex.so" loadmodule "tm.so" loadmodule "tmx.so" loadmodule "sl.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "maxfwd.so" loadmodule "textops.so" loadmodule "siputils.so" loadmodule "xlog.so" loadmodule "sanity.so" loadmodule "ctl.so" loadmodule "cfg_rpc.so" loadmodule "mi_rpc.so" *loadmodule "uac.so"* loadmodule "rtpproxy.so" loadmodule "dialog.so"
loadmodule "auth.so" loadmodule "auth_db.so" #loadmodule "tls.so"
# ----------------- setting module-specific parameters ---------------
modparam("dialog", "dlg_flag", 1) modparam("dialog", "track_cseq_updates", 1)
# ----- uac params ----- *modparam("uac", "reg_db_url", "mysql://127.0.0.1/kamailio http://127.0.0.1/kamailio")*
*modparam("uac","root","$avp(auser)")* *modparam("uac","root","$avp(apass)")* *modparam("uac","$null","$avp(arealm)")*
#modparam("uac", "reg_timer_interval", 60) #modparam("uac", "reg_retry_interval", 60) modparam("uac", "reg_db_table", "uacreg") modparam("uac", "reg_contact_addr", "VIP:5060")
# ----- tm params ----- # auto-discard branches from previous serial forking leg modparam("tm", "failure_reply_mode", 3) # default retransmission timeout: 30sec modparam("tm", "fr_timer", 30000) # default invite retransmission timeout after 1xx: 120sec modparam("tm", "fr_inv_timer", 120000)
# ----- rr params ----- # set next param to 1 to add value to ;lr param (helps with some UAs) modparam("rr", "enable_full_lr", 0) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 1)
# ----- rtpproxy params ----- modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722")
#!ifdef WITH_TLS # ----- tls params ----- #modparam("tls", "config", "/etc/kamailio/tls.cfg") #!endif
#!ifdef WITH_DEBUG # ----- debugger params ----- modparam("debugger", "cfgtrace", 1) modparam("debugger", "log_level_name", "exec") #!endif
####### Routing Logic ########
# Main SIP request routing logic # - processing of any incoming SIP request starts with this route # - note: this is the same as route { ... } route {
dlg_manage(); t_on_failure("TRUNKAUTH");
# chaeck for options if(uri==myself) { if ((method==OPTIONS) && (! uri=~"sip:.*[@]+.*")) { options_reply(); exit(); }
}
# per request initial checks route(REQINIT);
# do media anchoring route(RTPPROXY);
# handle requests within SIP dialogs route(WITHINDLG);
### only initial requests (no To tag)
# CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; }
t_check_trans();
# record routing for dialog forming requests (in case they are routed) # - remove preloaded route headers remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE")) record_route();
# handle registrations route(REGISTRAR);
if ($rU==$null) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; }
# dispatch destinations route(DISPATCH);
}
failure_route[TRUNKAUTH] {
if (t_is_canceled()) { exit; } if(t_check_status("401|407")) { $avp(arealm) = "AUTH_REALM"; $avp(auser) = "AUTH_USER"; $avp(apass) = "AUTH_PASS"; if (uac_auth()) { xlog("L_INFO", "CSeq diff: $dlg_var(cseq_diff)"); t_relay(); } else { xlog("L_INFO", "UAC_AUTH(): credentials not found"); } exit; } }
# Per SIP request initial checks route[REQINIT] { if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }
if(!sanity_check("1511", "7")) { xlog("Malformed SIP message from $si:$sp\n"); exit; } }
# Handle requests within SIP dialogs route[WITHINDLG] { if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { if (is_method("BYE")) { setflag(1); # do accounting ... setflag(3); # ... even if the transaction fails } if(is_method("PRACK")) { $var(rack_sequ) = $(hdr(Rack){s.select,0, }{ s.int}); $var(rack_meth) = $(hdr(Rack){s.select,2, }); $var(new_rack_cseq) = $(hdr(Rack){s.select,1, }{s.int}) + $(dlg_var(cseq_diff){s.int}); remove_hf("RAck"); insert_hf("RAck: $var(rack_sequ) $var(new_rack_cseq) $var(rack_meth)\r\n"); } route(DISPATCH); } else { if (is_method("SUBSCRIBE") && uri == myself) { # in-dialog subscribe requests exit; } if ( is_method("ACK") ) { if ( t_check_trans() ) { # non loose-route, but stateful ACK; # must be ACK after a 487 or e.g. 404 from upstream server t_relay(); exit; } else { # ACK without matching transaction ... ignore and discard. exit; } } sl_send_reply("404","Not here"); } exit; } }
# Handle SIP registrations route[REGISTRAR] { if(!is_method("REGISTER")) return; sl_send_reply("404", "No registrar"); exit; }
# Dispatch requests route[DISPATCH] {
if(dst_ip == VIP ) { $rd = "MEDIATION_FQDN"; $rp = "MEDIATION_PORT"; $td = $rd; if(!t_relay_to_tcp()) { sl_reply_error(); } } else { $rd = "TRUNK_DOMAIN"; $td = $rd; $du = "sip:SBC_SRV"; remove_hf("Privacy"); remove_hf("P-Asserted-Identity");
subst('/^From:(.*)sip:([^@]*)@([a-zA-Z0-9.]+?)(.*)$/From:\1sip:\2@ \3;otg=TRUNK_OTG\4/ig'); if (!t_relay()) { sl_reply_error(); }
} exit;
}
# RTPProxy control route[RTPPROXY] {
if (is_method("INVITE")){ if(dst_ip == VIP ) { rtpproxy_manage("rwei"); } else { rtpproxy_manage("rwie"); } }
return; }
onreply_route {
if (af==INET) { rtpproxy_manage("cwei"); }
return(1); }
Sep 30 03:01:25 divox kamailio[2734]: 0(2743) : <core> [cfg.y:3371]: yyerror_at(): parse error in config file /usr/local/kamailio-4.4/etc/kamailio/kamailio.cfg, line 189, column 32: unknown command, missing loadmodule? Sep 30 03:01:25 divox kamailio[2734]: 0(2743) ERROR: <core> [pvapi.c:828]: pv_parse_spec2(): error searching pvar "avp" Sep 30 03:01:25 divox kamailio[2734]: 0(2743) ERROR: <core> [pvapi.c:1032]: pv_parse_spec2(): wrong char [a/97] in [$avp(arealm)] at [5 (5)] Sep 30 03:01:25 divox kamailio[2734]: 0(2743) : <core> [cfg.y:3368]: yyerror_at(): parse error in config file /usr/local/kamailio-4.4/etc/kamailio/kamailio.cfg, line 190, column 9-20: Can't get from cache: $avp(arealm) Sep 30 03:01:25 divox kamailio[2734]: ERROR: bad config file (51 errors) Sep 30 03:01:25 divox kamailio[2734]: 0(2743) DEBUG: <core> [ppcfg.c:224]: pp_ifdef_level_check(): same number of pairing preprocessor directives #!IF[N]DEF - #!ENDIF Sep 30 03:01:25 divox kamailio[2734]: 0(2743) INFO: <core> [sctp_core.c:53]: sctp_core_destroy(): SCTP API not initialized Sep 30 03:01:25 divox kamailio[2734]: 0(2743) DEBUG: <core> [mem/shm.c:174]: shm_core_lock_destroy(): destroying the shared memory lock Sep 30 03:01:25 divox kamailio[2734]: 0(2743) DEBUG: <core> [mem/shm.c:266]: shm_destroy_manager(): destroying memory manager: f_malloc Sep 30 03:01:25 divox kamailio[2734]: 0(2743) DEBUG: <core> [mem/pkg.c:89]: pkg_destroy_manager(): destroying memory manager: f_malloc
On Thu, Sep 29, 2016 at 7:18 PM, scfcplummy notifications@github.com wrote:
kam.cfg.txt https://github.com/kamailio/kamailio/files/500785/kam.cfg.txt
Thats my full config with the !#defines and !#subst taken out.
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/kamailio/kamailio/issues/789#issuecomment-250470775, or mute the thread https://github.com/notifications/unsubscribe-auth/AF36ZVgagM4XZOtscypxADCX3R6sbtb_ks5qu8GhgaJpZM4KBSky .
sr-dev mailing list sr-dev@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev